Using Edit With (photoshop CS4) in Indesign CS4

In Indesign CS4 when i edit an image using photoshop CS4 and try to save the image it says it can not save because the file is already in use or was left open. But if i close the Indesign file then the image saves just fine. Please help i have thousands of images to edit this way.

ok i figered it out. you have to turn off preflight in Indesign then you can save the file in Photoshop.

Similar Messages

Edit With - Photoshop color shift

When using Edit With -> Photoshop with my 12 and 14-bit NEF files, the resulting file (after editing in PS) has a color shift. Same happens when I export a Version as 16-bit TIFF or PSD and then re-import it into Aperture.
I have tried it with 8-bit JPGs from camera, and the shift does not occur. Has anyone come across this problem and have a remedy? Your help would be greatly appreciated guys, thanks!

Ah, thanks for the tip. I've changed my Photoshop color settings to warn me when opening files with embedded color profiles. I simply choose to work in the embedded profile and upon saving and returning to Aperture, no longer notice any color shift. Thanks again!

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I down

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here. The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

Hi Jeff,
Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
Sincerely yours.
Peter

Problems with 'Print Booklet' from InDesign CS4

I am having problems using the 'Print Booklet commane in InDesign CS4. I have done this 100s of time from CS3 with no problems but for some reason it just won't auto duplex (print on both sides of the paper) when I do it from CS4. USing exactly the same settings, computer and file. The printer is setup correctly as will print double-sided automatically from other apps. Using mac leopard. Any ideas?

Unfortunately, I have tried this. I choose 'layout' from the printer option within the driver and pick 'short edged binding'. Still no luck.

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

Can i install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can i have some problems of compability? I use Windows 7. Thank u...

Can i install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can i have some problems of compability? I use Windows 7. Thank u...

Generally this should work, but of course there may be occasional compatibility issues across the different programs and their different versions.
Mylenium

InCopy CS4 (PC) / InDesign CS4 (mac) not working

My client and I are trying to establish an InCopy CS4 (PC) / InDesign CS4 (Mac) workflow. Neither of us has ever used InCopy and we are all getting frustrated now that our first production cycle has come and gone and the client is not recouping the money they invested on this software. Our trial system was successful for awhile and then it just stopped. The client says she can't open the icma/icml files and they need the indd file. So I send a new batch of files with the indd included and still no luck.
I'm saving the assigments like I've been saving in our initial trial run. In ID I go to Incopy > Export > Add all Stories to Assignment. That creates the content folder and the .icma files. I zip everything and send it off via email attachment.
Is there something I am doing wrong? Something my client needs to do? I prefer not to have to send the indd file. Should I have to do that for them to edit in Incopy? I appreciate any advice. Thank you. Lynn

Don't zip the files, that won't work.ID/IC is meant to work on a local server w/local staff. For a remote workflow you have to use a special technique.
After you create the assignment, use the Package for InCopy command in the Assignments panel.That creates an ICAP file that you send to the client.
When the double-click the ICAP file, it unpacks (it's like a zip file) on their computer and the assignment opens in InCopy. They work on the stories, and when they're done, they use the Return for InDesign command in *their* Assignments panel menu. That creates an IDAP file that they send to you.
When you open the IDAP file, it unpacks, looks for the INDD file (be sure not to rename or move it in the meantime), and updates the stories w/the editors changes.
Those are the broad strokes. It's covered more thoroughly in the online help file of both ID and IC ... you *and* your client should read up on it. And I cover it very thoroughly (4 videos ... Chapter 15) in my online Lynda.com tutorial on the CS4 workflow:
http://www.lynda.com/home/DisplayCourse.aspx?lpk2=651
(Chapter 15 isn't one of the freebie chapters, but you (or anyone) can use my 24-hour free pass for full access to their entire training library: http://lynda.com/freepass/amconcepcion)
AM

Editing with Photoshop CS3 from Photoshop Elements 8

I posted this in the PSE forum but didn't get any hits. Hopefulyy I'll be luckier here.
I have just purchased Photoshop Elements 8. I do all my editing usually with Photoshop CS3. I use Elements mainly for the organizer.
When I choose Edit with Photoshop from the organizer, it launches the application but the photo does not open in Photoshop. Nevertheless, there is a banner accross the photo in Elements that says "Edit in Progress". If I close Potoshop CS3, the banner stays there. I have to close Elements to get rid of it. If I choose "Open with Photoshop Elements" it works fine.
That used to work fine with my previous version of Elements 6.0. Everything works fine in CS3. Any suggestion on what I might be doing wrong?
I'm running Photoshop Elements and CS3 on Windows Vista 64 bit.
Thanks.

I have too much invested in Elements Organizer. 1000's of photos over a period of 5 years - tagged, version sets, stacked, albums, collections, ... I don't believe Bridge can do all of that.
I replicated the environment on a different PC with XP instead of Vista. Same problem. There seems to be a bug between Elements 8 and CS3. I don't have CS4 to test it with.
Come guys, with all the people in this forum, someone must have hit the problem or has an idea of what's going on. I logged a case with Adobe support but I doubt this will be a quick resolution.
Thanks.

Can't edit with Photoshop

I'm having an issue trying to edit my images. When I right click on an image and go to "edit with - photoshop CS4" nothing happens. I've tried several times with several images and nothing. The other day when I was editing it suddenly started opening IrfanView instead of Photoshop. Now, I just tried again to doublecheck and Photoshop isn't even an option - only Illustrator CS4 and IrfanView. This is getting frustrating. Is anyone else having a similar issue with the "edit with" feature? Any ideas on how to remedy this issue?

Yes, I've had the same problem using IDCS4 on Win XP. I got MS Paint opening and I vaguely recall what I did to fix it.
Thinking it was a memory problem I know I 'Closed' and 'Re-Opened' IDCSC4 at least once. I must have closed Photoshop and Acrobat also to free up RAM prior to doing this. I think failing that, I rebooted (maybe more than once, and to a full, dead, shut down and wait for the RAM to fully discharge for 5 minutes, as I recall). Then I just started and launched ID only, and it went away, finally. It hasn't reared it's ugly head since.

Iphoto Editing with Photoshop Elements 9

I am going into Iphoto, clicking the Edit button and it brings up Photoshop Elements 9. I make changes, they
look OK so I save it. When I get back to IPhoto, it looks like the change has been made. However when I go
back later in the day and click on the updated photo and there is a triangle with an exclamation point in the middle.
This means it can't find the original. They're all located in Iphoto, what is happening? Why does it look like the changes
are make and then I can't find them?

I do use a Mac, so I don¹t think versions is an issue. I would rather
pictures edited in PSE, which began life in iPhoto, should always be saved
back to iPhoto, as they were in Elements 8. That is not happening. Neither
do I know where to find pictures that PSE has saved.
From: "Barbara B." <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 21 Aug 2011 15:05:25 -0600
To: Warren Newman <[email protected]>
Subject: Iphoto Editing with Photoshop Elements 9
>> The save dialog sees an original and asks for permission to change it.
If you see the save as dialog you don't have your saving files preference set
correctly. To make versions, you must set it to Save over Original.
However, note that there is a big ol' bug in the mac version that if you even
open that particular preference window (even if you don't change anything
there) PSE will no longer add file extensions when you save. When using PSE as
external editor it doesn't matter so much, but if you ever save to the desktop
you will need to add the file extension manually to the saved file.
>

Editing with Photoshop CS3

I have just purchased PSE 8.. I do all my editing usually with Photoshop CS3. I use PSE mainly for the organizer. When I choose Edit with Photoshop, it launches the application but the photo does not open in Photoshop. Nevertheless, there is a banner accross the photo in PSE that says "Edit in Progress". If I close Potoshop, the banner stays there. I have to close PSE to get rid of it. If I choose "Open with Photoshop Elements" it works fine.
That used to work fine with my previous version of PSE 6.0. Any suggestion on what I might be doing wrong?
Thanks.

Hi Majouz,
Sorry I was out of town for a week so couldn't respond. I use CS3 on a Windows XP machine (2GHz Intel, 1 GB RAM).
Can you please see if the photograph filename or the folder path contains any special characters like aprostrophe, ampersand and all? If yes, rename your files / folders and try again.
Let me know if this works for you.
~thandamunda

IPhoto crashes when I edit with Photoshop!

Whenever I edit an iPhoto photo using Photoshop, iPhoto crashes when I try to import it back into iPhoto. This happens whether I export the photo, Photoshop it, and re-import it, or whether I use iPhoto Preferences to select Photoshop as my editor. I can import other photos into iPhoto, just not photos that have been edited with Photoshop. Help would be much appreciated!

Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

"Edit with Photoshop" isn't working any more

Guys, when I right-click an image and choose "Edit with Photoshop CS3" (edit Lightroom copy), it will create a copy but will not launch Photoshop. This creates a problem because other than exporting the file there is now no way of editing outside Lightroom.
How do I get this functionallity back?
(I think it started doing this when I applied the 1.1 patch...)
OS is WinXP.

I am having similar symptoms using Lightroom 1.2 and CS2. I just updated to Lightroom 1.2 this week.
The first time I select edit in CS2 Photoshop launches fine and the image is transferred. If I attempt to edit a second image Lightroom hangs indefinitely on "Preparing the file for edit". Lightroom is dead at this point. Any attempted operation, including canceling the edit, just adds to the hanging stack. The only out I have found so far is to exit Lightroom, tell it to abandon all uncompleted tasks, and then restart it. At that point it will again work correctly to edit one image. It is the editing that causes the hanging, other functions performed after an edit do not (e.g. working in the develop module on a second image).
Lightroom 1.1 did not have this problem. The images I was working on were imported into Lightroom after I updated to 1.2. I am working under XP Pro and off of an internal (vs external) hard drive.

Edit With Photoshop Menu Option

It would be nice if you could change the default editor. I only use PSE for the organizer and user the regular Photoshop to edit the photos. As an alternative, it would be nice if I could right click on a photo and choose a "Edit With Photoshop" option. I know I can do this within the Edit menu bar, but it would be more direct if I could right click on a photo and be able to choose my editing software.

Try this
http://forums.adobe.com/message/3443781#3443781

Unable to edit document using "Edit with Word" option

Hi All,
i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
i am able to open documents in browser
i am able to edit document using " edit with word/excel web" option
but i am unable to edit document using "edit with word/excel" option
i have Office 2010 installed on my local machine.
do we need to have MS office of 2013 version? or is there anything missing from configuration part.
Please help me.
Thank You,
Bhaskar.

Hi,
According to your post, my understanding is that you could not use the "edit with word/excel" option.
I had tested the issue with the Office 2010, the option worked well.
You don’t need to install the Office 2013 to use this option.
What did you mean “but i am unable to edit document using "edit with word/excel" option
Did you mean the option gray out? Did the issue occur in other browsers?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Using Edit With (photoshop CS4) in Indesign CS4

Similar Messages

Maybe you are looking for