Using Eikon USB fingerprint reader to access accounts

I am using an Eikon USB fingerprint reader to access my coomputer.
My question is, Is there a way to configure the logging in to the computer with multiple finger print scans to use one admin account?
And does anyone know how to use this type of scanner to set up username and passwords to access website accounts?

I have the Eikon USB fingerprint reader too, on a mac and a windows. On the windows side I have always been able to set up access to web sites, but on the mac I don't think it is supported yet. Also, if you want to enable different people to access the same account, just put their fingerprint in, they don't necessarily have to correspond to the correct finger in the illustration, but if you want to set it up so that you need two people to swipe their fingerprints to access one account, I don't know.

Similar Messages

Am I able to use my USB and read saved word documents

I am wanting to know if I am able to plug in a standard USB storage device and access saved word documents or PDF's. Can this be done via a connector of some sort.
Katrina

To expand on what Diavonex has said, here is a good round-up of available devices: http://www.cnet.com/news/wireless-mobile-storage-expander-roundup-frequent-trave lers-youll-want-one-of-these/.
Also, just understand that these storage devices must be accessed using their own iOS apps and are not generally accessible as you would expect on a computer for example.

Can i use only the fingerprint reader to log onto my phone?

I'm wondering if I can by pass the 4 digit code completely and only use the fingerprint reader to log onto my 5S phone.

Yes, that's how it's designed. You only need the passcode if you haven't unlocked your iPhone within the last 48 hours.
http://support.apple.com/kb/HT5883
Regards.

Using javax.usb to read usb using java

hai friends
iam trying to read data from usb and i had tried over javax,usb package it asks for the implemntation og javax.usb.UsbServices interface. wt is the solution
with regards hbk

I want to do it in windows

Copying files to SD card using USB card reader

Everytime I try to copy mp3 files to an SD card using a USB card reader my notebook hangs after just a few MB have been transferred. what should i do?

I myself have seen this happen right in front of me with a customer. Sometimes you have to me a little more selective with your card readers because not all of them work right out of the box.
I have found the Zio corporation readers to work splended with Mac OS X you can find them at Compusa I haven't really seen them any other place. But IMHO the issue is with your reader and not your memory.
As for the part number on the reader from compusa it is as follows that is if you are willing to give it a try....
Thunderbolt SD / MMC / MS Reader / Writer
Manufacturer: Zio Corporation
Mfg Part #: CM28100
Product Number: 332371

Use fingerprint reader in application software

Hi
I'm an application developer. I need to use the Lenovo integrated fingerprint reader as part of a timeclock application I am building. Basically a worker will authenticate and 'punch in' using a fingerprint scan
Where can I find doc about using the Lenovo fingerprint reader driver in my application?
Thank
Yakov

Hello and welcome,
I've moved your post here to the Technologies dev board. It's a bit of a guess on my part where it should go.
If you or others think it would be better in some other forum, we'll move it again.
And sorry, I don't have a clue how to answer your question. Hopefully someone else will join the conversation.
Regards,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

X121e Fingerprint reader question.

Hello, I'm new to this community. I have recently bought an X121e directly from Lenovo. The laptop is ace! I cannot however work out how to link the fingerprint reader with anything other than windows log in. I have a HP pavillion laptop too and this also has a fngerprint reader. With the HP I can use the fingerprint reader to access anything that needs a username and password including websites (hotmail, ebay etc) and programs. Is there a way of doing this with the X121e? I would love to be able to access my email by going to hotmail.com thn scanning my fingerprint in. Any help much appreciated. Cheers

client security solutions its a red lock icon open that FP is at the bottum left press that then you will see manage button press that FP window will open login to that then at the top is a setting press that a popup window will open then check the box for use FP for win.logon
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

X60 fingerprint reader driver

Hello gurus,
I've installed Win7 RC on my X60 and all is well.
My colleague mentioned that Win7 has native support for use of a fingerprint reader, and I would like to try it out instead of using Lenovo's Client Security Solution.
I have a clean Device Manager now except for the "Biometric Coprocessor", which I assume is the fingerprint reader.
Any idea how I can get the driver for it?
Thanks,
-Michael
Solved!
Go to Solution.

not the Windows Update but "missing" Driver Update from Device Manager, anyway if its working there is no problem

TS1315 I just bought a Sony Cybershot camera, DSC-W710. I have pictures in the memory card in the camera but I am unable to download my images using the USB connection. Any suggestions?

I am trying to download images from my Sony camera, DSC-W710, but iPhoto in my Mac is not accepting the download through a USB drive. Any suggestions?

KimEfromnc
Unfortunately some sad folks like to come to the forum not to help but simply to pick arguments for their own amusments.
No digitial still camera by any major maker requires installing drivers from a CD or DVD. None.
The same is true of many scanners and copiers too, in the hands of a knowledgeable computer user. People running older systems that they don't understand or know how to use will disagree, of course, if they choose to be argumentative. Personally, I ignore usch people.
The common causes for your issue are
1. A USB fault. That might be a damaged cable, an issue with the USB ports on your computer or your camera. Easiest way to check: swap the cables, try a different port, make sure your camera is on and charged
2. Try use a USB Card Reader or the Card Reader port on your Mac, if it has one.
3. Another possibility is that the camera card may need to be reformatted - you do this with the camera only.

Fingerprint Reader Support

Does anybody know if Snow Leopard has drivers for fingerprint reader devices, in particular the Microsoft USB Fingerprint reader?

Hi TinosaFish & welcome to discussions.
Doesn't look like it:
http://www.microsoft.com/hardware/download/download.aspx?category=MK
This one claims it works with some version of OS X:
http://www.amazon.co.uk/Digital-Privacy-Manager-fingerprint-reader/dp/B000PELLGS /ref=pdcp_ce1
I've tried making one work and never had any luck on Mac OS.

Fingerprint reader functionality in Arch; possible?

Thus far I am loving my first (actual) install of Arch, but am begginning to miss the use of my fingerprint reader. If theres no way it will work, I suppose thats ok, but I feel like its a waste of some nifty hardware.
I have a Thinkpad X60s. Let me know if any other information is needed, and what I'd need to install/configure to get the fingerprint scanner working (if its even possible).

Atreides wrote:
falconindy wrote:
google?
http://www.thinkwiki.org/wiki/Integrate … int_Reader
Sorry, long day yesterday...
I installed it through pacman, added "uinput" to "modules" in rc.conf, then used "tf-tool --verify" to scan my fingers. It worked perfectly to that point, but what exactly do I have to do to make it so that it asks for a scan on login? Theres so many distros listed on the thinkwiki page, I'm not sure what I need to do.
Read up on the pam_fprint module for pam.
Edit: btw, fingerprint is horribly insecure, a good password is way better.
Last edited by Mr.Elendig (2009-12-16 16:12:09)

Fingerprint reader not working - HP Pavilion dv7 - Windows 8

I have been working on this for over a year without any results. It is driving me crazy.
My fingerprint reader on my pavilion dv7 is not working. Actually it never worked (or showed any sign of action) since i bought my laptop.
I've tried installing many kind of different drivers and software, updated BIOS etc. Nothing works.
So i decided to call for your help.
Laptop info;
HP Pavilion dv7
Windows 8 64-bit
Bought 1 year ago in The Netherlands
p/n: B1X38EA (#ABH)
Help would be greatly appreciated
Greetings,
Glenn Peters

Hi,
Please refer to the following two documents.
Troubleshooting a Fingerprint Reader (Windows 8): http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&dlc=en&docname=c03718240
Using HP SimplePass Fingerprint Reader (Windows 8): http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&dlc=en&docname=c03653209
Please follow all the troubleshooting steps and let me know whether it helped.
Please support me by clicking on Kudos and Accepted solution if you like my advice. These are the best ways in which you can thank me.
I am an HP Employee.

T400 fingerprint reader error

After several months of flawless use of the fingerprint reader, It has recently stopped working for me. I don't know what is different about my system since I haven't really installed any programs to cause any change in my system. I think the finger print reader could be broken. Recently upgraded to Windows 7 x64. Finger print reader was working when I installed new driver except that it didn't show a successful fingerprint like when I had on a vista log in, but when other people try to use their fingers on my reader, it didn't work.
I have tried to re assign my fingerprints but the fingerprint never matches (after getting three swipes down). And while trying to reassign my fingerprint, it would say that the print was too short. I tried to change the bar to "more convenient" and it still doesn't work. Anyone know a better fingerprint reader software that would fix the problem? Or am I correct in that the thing is broken and I need to get a replace ment.
Specs: T400 - 7417CTO,
Finger print reader version: 3.3.0.56
tl;dr--fingerprint reader is messed up anyone know how I fix it?

do you have the fingerprint sensor option within the BIOS enabled?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

I assume these are POP accounts and all computers are set to remove from Server after downloading.
So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
Or get/setup IMAP accounts.

Lacie "using too much power", USB disabled, can't access ext HD?

Last night, moving items to my Ext HD, i got an error message about the USB "using too much power" and then it disabled it.
I'm using a 15'' 2006 Macbook with 10.6.7 operating system.
I've googled the issue and have run out of ideas.
The Ext HD is a 500GB LaCie Little Disk New Pack USB2.0 Black
Restarted the macbook.
Booted the macbook into safe mode.
I've tried plugging something else into both my USB ports (it detected the item, a camera card reader) and was usable.
When I plug in my Lacie Ext HD now using its usb cord, the blue light on the Lacie flashes as if its detectable/inuse but there's nothing in my Mac menus showing access to it.
HELP ?
Error Message:
Because a USB device was drawing too much power from your computer, one or more of your usb devices have been disabled.
To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again.

Maybe the disk will work through a separately powered USB Hub?
Bob

Using Eikon USB fingerprint reader to access accounts

Similar Messages

Maybe you are looking for