Using elements photos for other programmes

how can i get my photos from adobe elements for use in other programmes/projects, I want to use them in a Boots photo albumn but cant seem to locate the photos on my computer from elements 11

  If you are not sure which folder your images are located in, you can select a thumbnail in Organizer and the select the Information tab in PSE11 or right click and choose Show Properties in earlier versions.
The file path to your image will be shown and you can click to go directly to the folder location.
You could then upload directly from the folder using your originals, without affecting Elements provided you don‘t physically move anything.
 

Similar Messages

  • Using Elements 12 for a year and had to uninstall and reinstall it on same computer. Going to Editor I got message to sign in and register [again] but could not do this as I got message that I was offline or the computer clock was wrong but that was all O

    Using Elements 12 for a year and had to uninstall and reinstall on same computer. Going to  the Editor I got a message that I had to sign in and register the product (again) but I got a message that the computer was offline or the clock was wrong, there was nothing wrong with either of these.  How do I get my Elements 12 working again?  

    Hi,
    Please follow the steps mentioned in  Sign in, activation, or connection errors | CS5.5 and later and check if this helps.
    Do let me know if you need any other assistance.
    Thanks,
    Swapnil

  • How to use flagged photos for screensaver in Yosemite?

    How can I use flagged photos for a screen saver in Yosemite? I was able to do that with Mavericks but now I can't with Yosemite.

    See the below code to use a split with in a loop
    types : begin of TY_UPLOADF,
              STRING type STRING,
            end of TY_UPLOADF.
    types : begin of TY_UPLOAD,
              I_FIELD1 type CHAR23,
              I_FIELD2 type CHAR8,
              I_FIELD3 type CHAR8,
              I_FIELD4 type CHAR8,
              I_FIELD5 type CHAR8,
              I_FIELD6 type CHAR8,
              I_FIELD7 type CHAR8,
            end of TY_UPLOAD.
    data : IT_UPLOADF type table of TY_UPLOADF,
           IS_UPLOADF type TY_UPLOADF.
    data : IT_UPLOAD type table of TY_UPLOAD,
           IS_UPLOAD type TY_UPLOAD.
        loop at IT_UPLOADF into IS_UPLOADF.
          split IS_UPLOADF-STRING at '+' into IS_UPLOAD-I_FIELD1
                                              IS_UPLOAD-I_FIELD2
                                              IS_UPLOAD-I_FIELD3
                                              IS_UPLOAD-I_FIELD4
                                              IS_UPLOAD-I_FIELD5
                                              IS_UPLOAD-I_FIELD6
                                              IS_UPLOAD-I_FIELD7.
          append IS_UPLOAD to IT_UPLOAD.
          clear : IS_UPLOADF, IS_UPLOAD.
        endloop.
    Regards
    Gopi

  • I used elements 6 for many years.  Have to get new software and need help deciding what to get?  Pleaqse.

    I used elements 6 for years.  I am forced to decide on new software because it will not work with my computer now.  I need some serious answers as to what i should purchase/lease/ whatever?

    Why liquid cooling? You want more noise and more power consumption and higher expenditures, without lower temps?
    Corsair Hydro coolers do not give better cooling performance than air coolers from Cooler Master or Noctua, nor do they run quieter. They are only more expensive. Don't forget that air coolers in push-pull configuration have two fans, that are replaced by two fans on the radiator when using a Corsair Hydro. Unfortunately, the Corsair fans are pretty noisy, thereby defeating the intention of water cooling to make things more silent. Effectively, one replaces two fans with an average noise level of 25 dB with two radiator fans with 35 dB. If the cooling performance was better, that extra noise might be overlooked, but that is not the case. Up to around 4.8 GHz overclock, the performance difference between air coolers and Corsair Hydro is negligent. So, if you opt for Corsair Hydro coolers, you don't get better cooling, you do get more noise, more power consumption (because of the waterpump) and you spend a lot more.
    from Tweakers Page - What kind of PC to use?

  • I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

    I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

    grannybel
    It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
    But, while the arrangements are being made, here are a few things for you to think about if you have not already
    1. Reset Tools - Select Brush Tool, then
    2. Delete Settings File
    Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
    We will be watching for your progress.
    Thank you.
    ATR

  • When I select a netflix movie on my iPad and push it to my apple TV, why doesn't the Apple TV take over the streaming, so that I can then use my iPad for other things?

    From what I can tell, when I select the movie and hit the airplay button to move it to the apple TV, my iPad is still doing all the work of streaming the movie.  Why can't the apple TV take over the heavy work at this point?  I'd like to be able to use my iPad as more of a remote with an awesome interface for the apple TV.  The netflix app on iPad is great, and the easiest way to browse movies, and pushing them to the apple TV is fantastic, but once the movie starts, I want to use my iPad for other things!!!  Can this be put on the "to do" list for devs?

    the guy behind you wrote:
    From what I can tell, when I select the movie and hit the airplay button to move it to the apple TV, my iPad is still doing all the work of streaming the movie.  Why can't the apple TV take over the heavy work at this point?  I'd like to be able to use my iPad as more of a remote with an awesome interface for the apple TV.  The netflix app on iPad is great, and the easiest way to browse movies, and pushing them to the apple TV is fantastic, but once the movie starts, I want to use my iPad for other things!!!  Can this be put on the "to do" list for devs?
    Have you tried the Remote app on iPhone/iPad to control AppleTV, do searches etc?  Should be easier than the remote alone and this does not involve Airplay.
    Please note, only users read/comment here  - your idea is quite sensible in my view (maybe have a 'Continue viewing on AppleTV' option or something.  I doubt this would be high on Apple's roadmap but send them feedback here:
    http://www.apple.com/feedback/appletv.html

  • Can I stream a movie from my Macbook to my Apple TV on one display, and still use my Macbook for other things?

    I have a Macbook Pro and an Apple TV. What I'd like to do is stream a movie from my CinemaNow Account to my television by using my Apple TV and my Macbook. I know that I can do this my using the mirroring feature, however then I can no longer use my Macbook for anything else because my TV will only display what is on the screen of my Macbook. Now with this is mind, what then is the point of having multiple displays through the use of my Apple TV, if only one display can be used at a time unless they both show the same image? Or is there a way for me to be able to stream the movie to my TV and still use my Macbook for other purposes (multi-tasking)? 

    To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
    Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
    In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen.

  • HT201596 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive. ALL my files are on the 4TB. How do i get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes   THX  .

    Hi,  80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive as I ran pout of space. ALL my files are on copied on to the 4TB drive . How do I get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes   THX  .

    Select the desired location in preferences, then consolidate the media files to it.
    iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507 - Unfortunately this is misnamed.  It should say "Change where your media files but not where your library files are stored" - more information at: https://discussions.apple.com/message/22026652#22026652 - and steps 5-8 in https://discussions.apple.com/message/24491967#24491967

  • Is is possible to stream a movie through my Macbook pro 15inch onto a TV through my HDMI-DVI chord while also using my computer for other tasks and minimizing my streaming show.

    Is is possible to stream a movie through my macbook pro 15in onto a TV through my HDMI-DVI chord while also using my computer for other tasks and minimizing my streaming show.

    To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
    Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
    In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen.

  • Can time capsule be connected wirelessly and still use ethernet ports for other devices?

    can time capsule be connected wirelessly and still use ethernet ports for other devices? we have it connected wirelessly but devices connected to the ethernet ports are not working.

    Not as an additional router.. the TC will be plugged into the main router via ethernet (or ethernet equivalent)..
    Then the TC is setup in bridge mode. It will simply act as a Switch and HDD.
    The wireless can be setup in a number of ways.
    From your convenience point of view use it in roaming network mode..
    you simply give the TC the same Wireless Name as the existing routers SSID.
    Same security setting and password. WPA2 Personal = WPA2 AES which is the best.
    But they both use different wireless channels.. normally if you leave the TC on auto it will work fine, but I prefer to control the network.. so set the main router to say 1 and the TC to 11.
    You can also use a completely different wireless name etc.. that is up to you. It is still a single flat network and the only thing that is important is only having one router.

  • Using individual photos in other applications

    How can I access individual pictures in iPhoto when I want to use them in another application? If I want to open a photo in Photoshop Elements, my only option is to click on and upload the entire iPhoto Library. I don't want to upload the whole library, I just want to be able to drill down into the folders and select one picture like I used to be able to do. Is this possible in iPhoto 08? I was able to do it with the previous version.
    Now, if I want to use a photo, I have to export it to a folder on my desktop and access it from there. What gives? (this happens with other applications too, flickr uploader, blogger, etc...)

    Set PSE 6 as the external editor for iPhoto - then select the photo in iPhoto and click edit - to return the edited photo to iPhoto save it - to put it somewhere else use save as
    Under Leopard there are many more options for accessing your photos but under Tiger using PSE 6 as the external editor or exporting photos is pretty much it - as a note you really never should have been going into your iPhoto library directly - it can corrupt your library
    click here for a write up on accessing your photos from other programs - but most of the discussion is based on Leopard.
    LN
    LN

  • How do I use my photo for my background ?

    How do we now , after this update , use our own images or photos for our backgrounds?

    go to
    setting
    wallpaper
    choose wallpaper
    tap on the one you want to change and you'll have the choice of included ones or access to your camera roll. then choose your picture from there.

  • Using elements photo-downloader

    I have just bought PSE 9 to g with Premiere elements 9, I had been only downloading video clips to my computer via elements photo-downloader, but now I'm putting on photos as well, the photos are now loading into the main file (I specified) on C that my video clip were going to - I guess it looks a bit of a mess, but is that normal, or is it possible to specify that photos download into a different file than the videos? If it is possible, how do I do this?
    Thanks.

    Open the Organizer and press Ctrl+G to bring up the downloader dialog.
    Click the Browse button and choose My Pictures or a folder of your choice (My Pictures is the best option as Adobe uses as the Watch folder by default).
    Then connect your camera or card reader.
    If you already have photos in folders Click File >>Get Photos >>From Files & Folders
    Browse to a folder and press Ctrl+A to select all images and click Get Media or Open.

  • I have to export from Iphoto to use my photos in other programs (like Photo

    I'm new to MAC or IMAC. Moved my photos so IPhoto could use them and apparently IPhoto eats them. The only way I have access to them is to load them in IPhoto then export them.This seems unreasonable. So I'm hoping I've misunderstood some basic procedure. I use Iphoto to organize not to edit.
    TIA -
    Barb

    Barb
    Yes that is unreasonable, however the good news is that it's not necessary:
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically.
    That's the way to have pics you edit in PS (or whatever)
    There are three ways (at least) to get files from the iPhoto Window.
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
    Also, for 10.5 users: If you use the extended Open or Attach dialogue (with Column View) you can scroll to the bottom of the Shortcuts and find the Media browser there. Select any pic you want from there.
    Regards
    TD

  • Can I set "use facebook photo" for contacts by default?

    When I edit a contact's photo, I can choose "use facebook photo" from the available options if there is a facebook profile linked to the contact.  Is there a way to do this across ALL contacts, without having to edit each of my 300  contacts individually?
    The issue I'm having is that old facebook photos from contacts added in iOS 5 are not updating anymore because the old photo stays as the contact's primary photo from the last time it was synced prior to facebook integration.
    Thanks,
    PShag.

    Select it in the Startup Disk pane of System Preferences.
    (61137)

Maybe you are looking for