Using email activity in Process Flow

Hi
I am creating a process flow in owb, in it I am using the email activity, that if its a success or error then send the email. In the email activity parameters there is an option of binding, so can some one tell me that how will it work and how can I use binding with email.
Thanks
Salman

Hi Salman,
add the wanted parameters (smtp server, port, to_address...) to the start_1 operator in your processflow (see another thread in this folder how to do this, because it doesn't work properly). Set the values in this operator. Bind the parameters of the email activities to these parameters. You have to fill the from and to address in each email activity even if they are bound, otherwise you will receive an error, that the values are empty. This is another bug in my opinion, isn't it...
Regards,
Torsten

Similar Messages

How to set FROM ADDRESS for EMAIL activity in Process Flow

Hi all,
Can any one tell how to set(which address) FROM ADDRESS for EMAIL activity in Process Flow?
Thanks,
Suvvi

Did you set what OWB guide says:
To execute a process flow with an email activity, you may need to access different host machines and ports. New security measures implemented in Oracle Database 11g Release 1 restrict access to hosts and ports. You must explicitly grant access to hosts and ports that the email activity accesses using the DBMS_NETWORK_ACL_ADMIN package.
For example, the user OWBSYS needs to send an email through the mail server mail.example.com using port 25. The DBA must perform the following steps:
1. Create an Access Control List (ACL) for the user OWBSYS using the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL
(’acl_for_owb_cc.xml’,’ACL for Control Center’,’OWBSYS’,’CONNECT’);
The ACL has no access control effect unless it is assigned to network target.
2. Assign the Access Control List (ACL) to a network host, and optionally specify a TCP port range. Use the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (’acl_for_owb_cc.xml’,’mail.example.com’,25)
3. Commit the changes made using the COMMIT command.

How to edit the value in the email activity in process flow

I have an email activity in my process flow.
I want to change the value for the message body of the email activity. But it is not editable. While creation all the columns are in editable mode and after deploying and testing, i want to change the body of the email to be sent.
How can i do it now? Please advice. This issue is in 6.0.4 release.
Edited by: 910070 on Feb 17, 2012 12:48 AM

got the solution after so much research !
in 6.0.4, only way we can change the value for the message body or subject is to change the associate email procedure. which is something like edx_rpt_email.

Using "Route" activity in process flow

Hi, I have a situation where I want to run one of two maps, depending on how many rows are in a particular table, i.e. something like:
If table X rowcount > 100000
then run map A
else run map B
What's the most straight forward way to set this up in a process flow? I assume I need to write a PL/SQL function that returns the # of rows in the table...but after that I'm a bit stuck, and the OWB user guide has next to nothing on how to use the ROUTE operator.
Thanks in advance!
Scott

Hi David, thanks a million, that helps out a ton. I thought we had to use variables, with SET / ASSIGN and the ROUTE operator to do this...all of which are Enterprise ETL functionality.
It seems like the method you outline below, in addition being easier, actually is legal even if we don't have Enterprise ETL. Is that correct?
Thanks!
Scott
Includes the following advanced process flow functionality:
- Activity templates
- Variables support: assigning and passing variables and using the Assign and Set Status activities
- Looping activities such as For Loop and While Loop
- Route and Notification activities

How to use OMBPLUS activity inside process flow

Hi, I’m using OWB 11.2.0.3.
In a process flow, I need to use an OMBPLUS activity. When I run the process flow, it runs successfully and says: “Log file is available. Click Information button to view.”
-Where is the log file, OWB is talking about?
-Is there any sample of using OMBPLUS activity inside a process flow?
THANKS, au revoir!

Thanks, Dallan
Articles on "Oracle Warehouse Builder (OWB) Weblog" really help me.
So, I understand that I can't resume process flow in Control Center - only in Repository Browser. :)
IMHO, this is something puzzled and missmatch with official Users Guide

Email utility activity in process flow

Hi.
I am new to environment. I am trying to use email activity in Process flows. I have given the parameters that have to be given like "to-address" etc. Validation, Deployment and start are getting succeeded. But I am unable get a mail. Can anybody suggest me How to use this. And also How can I find the SMTP server in my local machine. Else suggest me any links pls.
Edited by: SwapnaPrerana on Jul 20, 2010 2:19 PM

Hello Swapna,
First of all you want to configure ACL and then do the following steps.
In email properties mention the details are as follows:
PORT = 25
SMTP SERVER = (Get this details from your ITIS Team of Email Server).
Regards,
Ava

EMail and SQLPLUS activity in process flow

Hi Guys,
I am struggling to get the email activity working. I entered all the details but no email is sent?
Secondly, I had an easy sql plus script that I pasted into the script property box
But the sqlplus just does not execute?
truncate table xxx;
quit
Any ideas?

Make sure there are no spaces after you have replaced DISABLED with NATIVE_JAVA.
Any space after the NATIVE_JAVA will not work.
Can you give details like what are you using Script or Parameter list etc ?
Did you configure the deployed location for the SQLPLus parameter ??
Regarding Your EMAIL -
Is your process flow showing any error regarding email ??
Create a simple process flow with email activity only.
Set FROM_EMAIL , TO_EMAIL , SUBJECT ,MESSAGE_BODY, SMTP_SERVER , PORT
SMTP_SERVER and PORT values are very important.
Check connection to SMTP_SERVER by running the following command on dos prompt
telnet smtp_server_name port
If this works this means your smtp server is working. Now just deploy and run your processs flow.
If it still doen't send you email, check whats in the log.
The log should give you any errors regarding email like ORA-06512: at "SYS.UTL_TCP", line 17 ,etc (if any).
Thanks,
Sam.

How to use substitution variables in sqlplus activity of process flow

I have a process flow that does nothing more than create a couple of packages that I cannot successfully deploy from OWB. A workaround, not something that I want to do, but currently there is not much time to adjust the packages so they can be deployed from OWB.
I can successfully create the packages from files that are present in a directory on the server. But the location (directory) is not the same in all cases (OTAP). So I thought to use an input parameter to the process flow (named TELLINGEN) and use that in the sqlplus activity.
I have created the parameter START_PATH with a default value.
I have added an sqlplus activity and placed the following into the PARAMETER_LIST variable of the activity:
?${Target.ConnectString}?@${TELLINGEN.START_PATH}/npl_dbug.pkg?
When I run the process flow I see the following in the output:
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Mar 18 18:10:14 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SP2-0310: unable to open file "${TELLINGEN.START_PATH}/npl_dbug.pkg"
SQL> SQL> Disconnected from Oracle Database 10g Enterprise Edition Release
10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
It obviously connects to sqlplus but then cannot find the file. Presumably because the variable has not been substituted.
How can I persuade the activity to substitute the variable?
Kind regards,
Eric.

Have been reading around a bit and found the (a) solution:
I placed the following in PARAMETERLIST:
?${Target.ConnectString}?@${Working.RootPath}/base64.sql?
And it turns out ${Working.RootPath} is pointing to the location you can provide under the configure for the sqlplus activity in the process flow. Just as you have to provide the target destination as indicated here: Re: SQLPLUS Activity in Process Flow
From the documentation it was not immediately clear to me where Working.RootPath was pointing to.

Error while using Email Activity

Env:
Win XP SP2
SOA Dev Preview 10.1.3.1
Jdev
Prob: Am trying to send an email notification to my email id. I create a new BPEL Synchronous process and drag and drop the email activity into the process. I set the details into "to", "subject" and "body" parameters.
And then I try to deploy the process.
It throws an error "URI is not hierarchical"
Can some one let me know the reasons for it.
Thanx
AJ

Thanx Clemens,
The xml that you had mentioned is same as the one I am working with. When I double click on the error in the error panel displayed in JDev, the cursor moves to the first line in the bpel file which says "<?xml version = "1.0" encoding = "UTF-8" ?>".
I am still unclear as to what is the issue with the code that I am using. Following is my bpel file. Also, please let me know if there are any libraries or jar files to be included for using email activity in the bpel process.
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="SendEmailNotification"
targetNamespace="http://xmlns.oracle.com/SendEmailNotification"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:client="http://xmlns.oracle.com/SendEmailNotification"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:SendEmailNotification"
myRole="SendEmailNotificationProvider"/>
<partnerLink name="NotificationService"
partnerRole="NotificationServiceProvider"
partnerLinkType="ns1:NotificationServiceLink"/>
</partnerLinks>

<variables>

<variable name="inputVariable"
messageType="client:SendEmailNotificationRequestMessage"/>

<variable name="outputVariable"
messageType="client:SendEmailNotificationResponseMessage"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="client"
portType="client:SendEmailNotification" operation="process"
variable="inputVariable" createInstance="yes"/>

<scope name="Email_1">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:email"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="varNotificationReq"
messageType="ns1:EmailNotificationRequest"/>
<variable name="varNotificationResponse"
messageType="ns1:ArrayOfResponse"/>
<variable name="NotificationServiceFaultVariable"
messageType="ns1:NotificationServiceErrorMessage"/>
</variables>
<sequence name="Sequence_1">
<assign name="EmailParamsAssign">
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="string('hi')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="string('[email protected]')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from expression="string('checking mail from bpel pm')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:MimeType"/>
</copy>
</assign>
<invoke name="InvokeNotificationService"
partnerLink="NotificationService"
portType="ns1:NotificationService"
operation="sendEmailNotification"
inputVariable="varNotificationReq"
outputVariable="varNotificationResponse"/>
</sequence>
</scope>
<assign name="Assign_1">
<copy>
<from expression="'Mail Sent'"/>
<to variable="outputVariable" part="payload"
query="/client:SendEmailNotificationProcessResponse/client:result"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client"
portType="client:SendEmailNotification" operation="process"
variable="outputVariable"/>
</sequence>
</process>

Need help with using Email Activation Agent

Hi,
please, help me with using E-mail Activation Agent.
I used email activation agent to start business processes by email, but after that letter disappear from email-server.
Where letter was located?
Can I get and read letter for processing?

Mail/Preferences/General - do you have Unibox set as your default e-mail application?

Send Email using Email Activity in BPEL

Hi Everybody,
I am trying to send email using email activity in BPEL
All that I have done is,
1.dropped Email activity between recieve i/p and reply o/p in my bpel project
2.written all parameters in it like Default, To ,from etc.
3.made changes in the ns_emails.xml in .........bpel/systems/services/config & in .......integration/esb/config
4.restarted SOA,Jdeveloper
--> but I was not succeeded.
So please provide me with complete solution like what parameters to pass in smtp server,port no,protocols etc and which file to change in which directory. my work is pending just because of this.
I would be very grateful to you.
thanks in advance.
mansoor.

hi Eric,
thanks once again for your instant reply.
but still I am not able to send Email from bpel so I would be requiring your more help.
I have gone through below link where you helped someone last year.
Email
As per this link I have downloaded the patch and tried but no result.
in above link I have not understood one thing
"the ip-address of soa-suite-server is allowed to make use of the smtp?
you need to add this address in the mailserver-config "
which was said by you.
So can you please provide me the details.
Also I wanted to know how we can come to know that our SOA suite will allow mail server to send Email.how to link mail server to SOA suite etc.
So please help me out .
thanks in advance.
mansoor.

Find out type of activity in process flow

I am currently working on generating process flows. I place a bunch of mappings or sub process flows (sometimes more than 20) in a process flow. Then I connect them basically to indicate the order in which they have to be processed.
Next I want to generate the succes, warning and error transitions. I can easily list the activities in the process flow using
OMBRETRIEVE PROCESS_FLOW 'SOME_FLOW' GET ACTIVITIES
likewise I can easily retrieve the transitions.
My main problem now is that I cannot find where to start.
I know a process flow is created default with a START1 activity but the name can be changed, so that is not a fool proof option. I have been looking for something like
OMBRETRIEVE PROCESS_FLOW 'SOME_FLOW' ACTIVITY 'START1' GET PROPERTIES (ACTIVITY_TYPE)
But the property apparently does not exist.
If I do
OMBDESCRIBE CLASS_DEFINITION 'PROCESS_FLOW' GET CHILD_TYPES
I see a START_ACTIVITY child type is listed. Now I am looking for a way to connect the child type to the activity
Anybody ideas?
Thanks in advance,
Kind regards,
Eric.

Thanks Oleg,
After posting the question on the forum I remembered I had made lists of activities for various activity types, in my case MAPPINGS and SUBPROCESSES. So I tried the same for START activities, just like you apparently have done. And with the same conclusion; there is not a complete list of activity types you can use.
I also noticed there is no START activity in the Palette of the Process Flow editor. And that you cannot delete a start activity (API-10011 You cannot delete this type of activity). Apparently a start activity is a special case of activity. And I think I will treat it this way. I will assume no one in his right mind will rename this activity from it's default 'START1' name and start my exploration of the flow in the process there.
Thanks again for confirming my suspicions.
In the process of finding out activity types that are supported I made a list (OWB 10.2.0.3):
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET AND ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET ASSIGN ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET DATA_AUDITOR ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET EMAIL ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET END_ERROR ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET END_LOOP ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET END_SUCCESS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET END_WARNING ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET FILE_EXISTS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET FOR_LOOP ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET FORK ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET FTP ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET MANUAL ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET MAPPING ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET NOTIFICATION ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET OR ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET ROUTE ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET SET_STATUS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET SQLPLUS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET SUBPROCESS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET TRANSFORMATION ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET USER_DEFINED ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET WAIT ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET WHILE_LOOP ACTIVITIES
Kind regards,
Eric.
Message was edited by:
ericb
Message was edited by:
ericb

User Defined Activity "hangs" Process Flow if it runs for more than 10mins

I have been using OWB (10g r2) for a while and have used "User Defined" activities in production process flows successfully before.
However my problem now is that the activity (shell command) I want to perform, takes more than 10 minutes to complete. If I run the process flow with a parameter that generates a shell command that executes in two or three minutes, the process flow continues past the sucessfully executed user defined activity to the next activity.
BUT
If I run the same process flow (without modification or even redeployment) with a different parameter , the user defined acivity sucessfully executes (after about 11 minutes or so) but the process flow , doesnt seem to know that it is finished and just says it is still executing.
my "user defined" activity has
COMMAND: /usr/bin/ksh
PARAMETER_LIST bound to a variable which is set earlier in the process flow.
RESULT_CODE:
SCRIPT :
SUCESS_THRESHOLD : 0
by examining (RUNTIME CONTROL CENTER SCHEMA).all_rt_audit_execution_params
I can see that the variable contents assigned to RESULT_CODE look like this
'/usr/bin/rsh -n WINSRV1 dtsrun /usa /ppw /S WINSQLSRV /N JOBNAME_SHORT'
or this
'/usr/bin/rsh -n WINSRV1 dtsrun /usa /ppw /S WINSQLSRV /N JOBNAME_LONG'
I put the -n in because I thought that may have been the problem, but I think its more likely that there is come sort of ".properties" in a runtime file that needs to be set to control the "timeout" of user defined activities.
(like in Runtime.properties
property.RuntimePlatform.0.NativeExecution.Shell.security_constraint = NATIVE_JAVA
except maybe
.........Nativeexecution.timeout = .....?????
Has anybody had a problem like this? Found a document describing available configuration properties for PF activites?
Can anyone help?

I have been using OWB (10g r2) for a while and have used "User Defined" activities in production process flows successfully before.
However my problem now is that the activity (shell command) I want to perform, takes more than 10 minutes to complete. If I run the process flow with a parameter that generates a shell command that executes in two or three minutes, the process flow continues past the sucessfully executed user defined activity to the next activity.
BUT
If I run the same process flow (without modification or even redeployment) with a different parameter , the user defined acivity sucessfully executes (after about 11 minutes or so) but the process flow , doesnt seem to know that it is finished and just says it is still executing.
my "user defined" activity has
COMMAND: /usr/bin/ksh
PARAMETER_LIST bound to a variable which is set earlier in the process flow.
RESULT_CODE:
SCRIPT :
SUCESS_THRESHOLD : 0
by examining (RUNTIME CONTROL CENTER SCHEMA).all_rt_audit_execution_params
I can see that the variable contents assigned to RESULT_CODE look like this
'/usr/bin/rsh -n WINSRV1 dtsrun /usa /ppw /S WINSQLSRV /N JOBNAME_SHORT'
or this
'/usr/bin/rsh -n WINSRV1 dtsrun /usa /ppw /S WINSQLSRV /N JOBNAME_LONG'
I put the -n in because I thought that may have been the problem, but I think its more likely that there is come sort of ".properties" in a runtime file that needs to be set to control the "timeout" of user defined activities.
(like in Runtime.properties
property.RuntimePlatform.0.NativeExecution.Shell.security_constraint = NATIVE_JAVA
except maybe
.........Nativeexecution.timeout = .....?????
Has anybody had a problem like this? Found a document describing available configuration properties for PF activites?
Can anyone help?

Oracle soa 11.1.1.4 html email using email activity

Experts,
In one of my process i am generating tabular form content in email using html tags in transform xsl file and passing this xsl using ora:processXSLT funtion to contentbody variable of email activity. This works fine in *11.1.1.1* i am able to see email with tabular form content but *11.1.1.4* i am getting an email without content.
In 11.1.1.4 if i pass some simple string to the content body then its working fine i am able to see am email with that string and if i pass the transformation which is having html tags int it, its not working . I have no idea
why the html tags are not getting recognizing in 11.1.1.4 email activity.
Can someone please help me to solve this issue.
Note: its working very goodl in 11.1.1.1.
here how i am calling fine in bpel
*<copy>*
*<from expression="ora:processXSLT('xsl/GenerateHTML.xsl',bpws:getVariableData('ResponseOutput','/ns4:Response'))"/>*
*<to variable="varNotificationReq" part="EmailPayload"*
query="/EmailPayload/ns6:Content/ns6:ContentBody"/>
*</copy*
and here is my transformation GenerateHTML.xsl
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0" xmlns:ns0="http://www.oracle.com/mgSOA"
xmlns:xpath20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
xmlns:sample="http://www.oracle.com/XSL/Transform/java/oracle.sample.SampleExtensionFunctions"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
exclude-result-prefixes="xsi xsl ns0 xsd xpath20 bpws mhdr oraext dvm hwf med ids xdk xref ora socket sample ldap">
<xsl:output method="html" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
<xsl:text disable-output-escaping="yes"><b>s list </b></xsl:text>
<xsl:text disable-output-escaping="yes"><br></xsl:text>
<xsl:text disable-output-escaping="yes"><br></xsl:text>
<table border="1">
<tr bgcolor="#9acd32">
<th width="80">EntityType</th>
<th width="400">Organization name</th>
<th width="100">Country</th>
<th width="200">Code</th>
<th width="200">Date</th>
</tr>
<ns0:Response>
<xsl:for-each select="/ns0:Response/ns0:ResponseData">
<tr>
<ns0:ResponseData>
<td width="80">
<ns0:R_entitytype>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="ns0:R_entitytype/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="ns0:R_entitytype"/>
</ns0:R_entitytype>
</td>
<td width="400">
<ns0:R_orgname>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="ns0:R_orgname/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="ns0:R_orgname"/>
</ns0:R_orgname>
</td>
<td width="100">
<ns0:R_country>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="ns0:R_country/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="ns0:R_country"/>
</ns0:R_country>
</td>
<td width="200">
<ns0:R_Code>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="ns0:R_Code/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="ns0:R_Code"/>
</ns0:R_Code>
</td>
<td width="200">
<ns0:R_Date>
<xsl:attribute name="xsi:nil">
<xsl:value-of select="ns0:R_Date/@xsi:nil"/>
</xsl:attribute>
<xsl:value-of select="ns0:R_Date"/>
</ns0:R_Date>
</td>
</ns0:ResponseData>
</tr>
</xsl:for-each>
</ns0:Response>
</table>
<xsl:text disable-output-escaping="yes"><br></xsl:text>
<xsl:text disable-output-escaping="yes"><br></xsl:text>
</xsl:template>
</xsl:stylesheet>

Try using ora:toCDATA function, I had the same issue and this seemed to work.
<copy>
<from expression="ora:toCDATA(xdk:processXSLT('xsl/GenerateHTML.xsl',bpws:getVariableData('ResponseOutput','/ns4:Response')))"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns6:Content/ns6:ContentBody"/>
</copy>

SQLPLUS Activity in Process Flow

Hi
Im Trying to include a sql script thru Process flow using a SQLPLUS Activity
In the Script, im giving the value as copy command(which im supposed to give)
before that im giving the specifications as
/oracle10/bin/sqlplus schema_name/password@DB followed by the copy command...
While executing am getting the error as
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
Can anyone help on this?
Regards
Ela

Hi all,
Im trying to include a copy command in my sqlplus activity.
While execution it throwing the error
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
When I try to run the same copy command from the SQLPLUS, its working fine without any problem....
Im not able to figure out the reason behind that.
Suggestions Please
Thanks in Advance,
Ela

Using email activity in Process Flow

Similar Messages

Maybe you are looking for