Using employee in production order confirmation

Dear All,
I want to use employee number registration in production, order confirmation.
What transaction I must to use?
I checked PA40, but I don't need to implement HR module, and there are many other informations that I dont't use in PP.
I need for a name, surname, employee number, date for beginning, date for ending.
Can somebody tell me an easy way to do this?
Thank you very much!
Regards,
Marian

Hi
Go to PA40 enter the Personnel no. XXXX , From date and click manual hire then execute. Then enter the Personnel area, Employee group and Employee subgroup and save then you will get create personal data screen in that you enter name, surname, employee number, date for beginning, date for ending then SAVE.
If you follow the above procedure you can get the personnel number in confirmation screen.
Prerequisites:
You need to create in SPRO
1. Personnel area
2. Employee group
3. Employee subgroup
Thanks
S.Murali

Similar Messages

Error during Production Order Confirmation mfbf ( backflush)

in my company in sap when i using mfbf for production Order confirmation of tractor then during backflush using mfbf tcode order confirm but in my store dept no metiral cunsume so please regards this problem
with warm regards
pritpal singh

Dear Pritpal,
sorry dear,today i cant check my inbox immediately. Anyway my mail id is [email protected]
have checked as per my previous post.
regards
pradeep

User Exit For Production Order Confirmation Using CO15 or COGI

Hi all,
I need user exit for the production order confirmation so that i can set
AFPO-ELIKZ and AUFM-ELIKZ (delivery completedu2019 status flag) to Blank......
Thanks

hi,
check these exits.
CONFPP01                                PP order conf.: Determine customer specific default values
CONFPP02                                PP order conf.: Customer specific input checks 1
CONFPP03                                PP order conf.: Cust. specific check after op. selection
CONFPP04                                PP order conf.: Customer specific input checks 2
CONFPP05                                PP order conf.: Customer specific enhancements when saving
CONFPP06                                PP Order Confirmations: Actual Data Transfer
CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01                                PS confirmation: Determine customer specific default values
CONFPS02                                PS confirmation: Customer specific input checks 1
CONFPS03                                PS confirmation: Customer specific check after op. selection
CONFPS04                                PS confirmation: Customer specific input checks 2
CONFPS05                                PS confirmation: Customer specific enhancements when saving
CONF0001                                Enhancements in order confirmation
CONFPI01                                Process order conf.: Calculate cust.specific default values
CONFPI02                                Process order confirmation: Customer spec. input checks 1
CONFPI03                                Process order conf.: Cust. spec. check after op. selection
CONFPI04                                Process order conf.: Customer specific input checks 2
CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
CONFPI06                                Process order confirmation: Actual data transfer
CONFPM01                                PM/SM order conf.: Determine cust. specific default values
CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04                                PM/SM order conf.: Customer specific input check 2
CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
use the exit which contains both structures AFPO,AUFM.

Serial Number. Production Order Confirmation. GR. UD. Sales Delivery

Hi Gurus,
Please help on this issue to get any user exits .....
As part of Serial number management, we have a certain issues on serial number confirmation, goods receipt from production order and quality inspection with UD.
Master data:
Finished product material master, Workscheduling view, Serial number profile maintained " ASRN"
Process flow:
1) Avalon Specific Serial numbers generation for finished goods through production order release status.
              (A11206000001)
                                    A - Avalon
                                    1   - PCB Unit 1
                                    12 - Year 2012
                                    06 - Week
                                    000001 - Running serial number for the week.
2) Production order confirmation through CO11n transaction.
3) Production order Goods receipt through MIGO transaction against order.
4) Quality Inspection with Usage Decision through QA32 transaction.
5) Goods Issue for Delivery.
SAP Product Error:
1) System does not track and control the operation wise confirmed serial numbers during order confirmation.
2) System does not track and control the finally confirmed serial numbers during order goods receipt.
3) System does not track and control the last goods receipt qty in Usage Decision.
4) For semi finished product, if we maintain serial number profile in workscheduling view, system is not showing goods issue material list in Co11n transaction for the finished goods.
5) Interfacing the serial number reading scanner with SAP, is not working without entering material number and serial number manually.
6) System does not tracking and controlling the last Usage Decision done serial number during Goods issue to Sale order Delivery.
Regards,
Santha

Hi Santha,
This is a bit vast, but I'll try to address at least some of the issues:
1- serial number in operation confirmation is not possible, for the reason that serailization is part of stock management, and as WIP in an order, this is not stock yet. Actually you cannot confirm the manufactured material either, and those 2 go together.
For tracking specificly WIP, there's something called WIP batches; you may look into it to see if you can use it.
2- during GR system will propose those SNs that you have defined for the order at release or creation.
3- ?
4- GI in CO11N is provided only for BACKFLUSHED material components. Serialized materials CANNOT be backflushed.
5- You can use a barcode reader to read the serial number (instead of keyboard entry) when cursor is on the right field in the respective screen.
6- ?

Change Work Center during production order confirmation

Dear All,
I must to modeling this situation:
I created an production order. In routing I used an work center A.
After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
Thank you for your answer!
Regards,
Marian

once a Order is released, the Process order detaisl for that order is frozen.
however if you want to do it, change the order status to CRTD after reversing the Movements done.
Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
if the change is long term.
or
Just manually add the new work center and do the processing. if the change is temporary.

URGENT: Prob with Production Order Confirmation

Hi Gurus,
I have a problem with Production Order Confirmation.
When I am confirming a Prod Order and if the components present are more than '999', then error is being thrown and Material Document Number is not being created.
I want to split the records into 500 slots and pass them at a time for the creation of the Production Order so that it doesnt throw me an error while creating a Material Document No.
While saving the Production Order confirmation order, it should split the records into 500 slots each and then create Material Document No for each slot.
Can anyone please help me out in this regard, how to solve this.
Thanks & Regards,
Harish Kalla

Hi Harish,
This problem is addressed in OSS Note : 36353
The Symptom reads like this
==========================================================================
When you post documents using the AC interface (from SD, MM or other applications), items appear in the FI document which are identical in all or in almost all fields.
This can also cause error message F5 727 ("Maximum number of items in FI reached"). The system issues this error if more than 999 items occur in an FI document.
===========================================================================
This Note is an elaborate one..
Hence, go through this and ask your FI Consultant to help you in this regard.
All the best..
Regards,
Siva

Measuring point update by production order confirmation

Hi friends,
I created a prt as equipment and assigned it to the routing. I created a production order and when i confirm the same i am getting following error as:
Document MeasUnit has a different dimension to the characteristic unit
Message no. IR071
Diagnosis
The measurement unit on creation of the measurement document must have the same dimension as the measurement unit of the characteristic of the measuring point.
In this case, the measurement unit % does not suit the character unit EA of the measuring point 103.
System Response
Processing will not be continued.
Procedure
Use the possible entries help.
Please suggest the solution.

Hello Sir(s)
i have gone through entire post for the subject related to measuring point auto update from production order confirmation. I have tried the same but i dont know what i am missing.
if i put some value like 1 or 2 and appropriate UOM then only my measuring document is being updated with the same value not with the actual confirmed quantity.. i have already maintained standard formulla in prt view.
my basic requirement is to get actual value of produced quanity as counter update. means if 20 pieces have been produced and confirmed in co11n, then counter must bhe updated with the value of confirmed quantity.
please advice what value should i put as usage in routing master to get actuall counter update.
Will Highly appreciate your quick reply.
Snapshots
Regards.
Mohammad.

Restricting Good Receipt Unless Production Order Confirmed

Hi
Experts,
I want to Restricting Good Receipt Unless Production Order Confirmed
I am doing following thing but the error is occured.
Use Tcode BS02 ( Customising USer status profile).
2. Select the order type which you want to configure (eg:PP000001) and choose "Details" button.
3. In the User status table do the following:
a. In the status no field type"1" , status field "Sta1", short text"GR not allowed", lowest no "1", Highest No "2". Mark a tick in the initial stats check box.
b.Next line, type status no field "2" ,status field "sta2", short text"Gr allowed", lowest no "2" , highest no "2".
4. Select the STA1 line and choose details. select the "create"button.select the "GR for prod order", mark "forbidden
radio button" and "set radio button".
5. Select the STA2 line and choose details. Selct the "create"button. select "confirm order", mark "permitted radio button" and "set radio button". Next choose "GR for prod order" , mark "permitted radio button".
6.Save.
Create a prod order and check whether the required scenario is working.
I have created user status profile as PP000001 GR
ERROR
First define allowed object types
Message no. BS218
Diagnosis
The object types for which a status profile may be used define which business transactions are included in business transaction control.
Procedure
First define for which object types this status profile can be used.
What is object type how to define?
Thanks & Regards
Pert

Hi,
Refer to the below thread which addresses the same need:
Re: GR not allowed :BS02
Revert if you face any issues.
Regards,
Vivek

Is possible to create a TO automatically after production order confirmation?

Hi all
I have just a question in order to know if we can configurate a procedure to a Production Order, so my question
is possible to create a TO automatically after production order confirmation in a standard enviroment?
Thanks in advance for all your comments

Hi Gurus,
Thank you for your help in this case.
Process:
The customer create a production order in CO01 and then they confirm the order in CO15, after confirmation TR is created ( we can see this in LB10 ) and negative stock is created ( we can see this in LS24 ).
Requirement:
They are asking to create the TO automatically after the production order confirmation. Negative stock is afecting the process.
Workaround:
They are creating the TO in background in LB10. ( negative is fixed )
Question:
Can we create the TO automatically after confirmation in standard configuration?
if no , how can we confirm this TO .using a JOB option?
TR created after confirmation
TR header
LS24 negative units.
Regards!!
Ronald

Price difference on cancellation of production order confirmation

Hi,
We are having a material which is maintained at price control "S". We have created a production order for the material. In due course of business, we did confirmation for say 100 pcs of the material. However, immediatly on confirmation, we realized that we do not need to do the confirmation & hence we did the cancellation of the production order confirmation using CO13.
On doing the production order confirmation cancellation, we observed that the system has posted some amount to "price difference account"
We also observed that once in a while this kind of entries do get posted.
It is requested to please let us know in why system is behaving this way?
We have checked SAP Note no 216080 "Price difference when reversing GI for S-Priced material" & SAP Note no 215980 'Price difference during GR for the production order". However we are not convinced that these could be the reason for the price difference.
Thanking you in anticipation
Regards
Santosh Kumar Agarwal

Hi,
Yes, you are correct in the understanding that the system creates quants in 914 when the production order confirmation is cancelled. But, it does not generate any TR or TO in the background to post the stock back into the original storage type.
Can we not use the put away strategies so that the system determines where to place the material? My query is that despite all the configurations for automatic TO creation and confirmation for movement type 262, it does not generate a TO (or TR) in the background when a production order confirmation is cancelled using CO13.
However, if I manually post a material using MB1A for 261 movement type and reverse it using 262, it generates a TO and confirms it as per the setting in configuration.
The same thing does not work when we run it through PP (CO11N and then CO13).
Any suggestions on how to approach this and where to check for missing configurations?
Thanks and Regards,
Gaurishankar

Total Production Order Confirmation..Urgent

Hi
Can anyone tell me where to find the total production order confirmation by Second ( or minutes or hours ) for any month i.e. say for example March 2007
Please suggest......Its urgent
Rgds

Hi Vichy,
Try this, COOIS,
List =confirmation
Profile =std profile
selection -> sys status =CNF
Resrict ther report with Dates with Order header level.
To get activity values use change layout option inside the report.
Select the field like unit/activity. from change lay out menu.
Pradeep
Edited by: Pradeep Kumar on Apr 18, 2008 9:19 AM

Equipment as PRT's during Production Order Confirmation

Hi Gurus,
During Production Order confirmation I cannot see whether I have consumed equipments as PRT which are attached to operation.
The operation is showing CNF status as well the Order.
How can I see whether which Equipment was used for each operation since there can be more than one equipment as a PRT's for a single operation.
Regards
Nilesh

I use Production Order confirmation hence saw it in CO14 and checked that PRT's are in PRT REL status..I guess this is what you mean to say right??
Thank you so much for your response.
Regards
Nilesh

Cancellation of Production Order confirmation (CO13) not generating TR/TO

Hi,
We are facing a typical issue in the PP-WM interface. When we create an order and confirm it (partial confirmation), the Goods movement happens (261 mvt type) as desired and the TO is created and confirmed in the background.
But, when we try to reverse the movement type (cancelling the production order confirmation using CO13) then there are no TRs or TOs generated in the background (for movement type 262).
When I manually try to post a material document for 262 movement type, it creates a TO in the background (as per the configurations that I maintained) but this does not happen when movement type 262 is called using PP interface.
The movement type configurations are all done for Automatic TR and TO generations - this works with normal IM process (when we manually post using MB1A transaction) but not with the return Goods movement happening with PP.....here, the material comes back to the interim storage type 914. We then need to create a TO manually and confirm it to take the stock back in to the original storage type and bin.
We want that when a process order confirmation is cancelled then the materials should be posted back in to the original storage type and bin (from where the material was issued against the order).
For Info: COGI shows no errors during the 262 movements, also, material document is generated for 262 movement type but no TR/TO generated.
Is there any configuration that we have missed?
Thanks and Regards,
Shankar

Hi,
Yes, you are correct in the understanding that the system creates quants in 914 when the production order confirmation is cancelled. But, it does not generate any TR or TO in the background to post the stock back into the original storage type.
Can we not use the put away strategies so that the system determines where to place the material? My query is that despite all the configurations for automatic TO creation and confirmation for movement type 262, it does not generate a TO (or TR) in the background when a production order confirmation is cancelled using CO13.
However, if I manually post a material using MB1A for 261 movement type and reverse it using 262, it generates a TO and confirms it as per the setting in configuration.
The same thing does not work when we run it through PP (CO11N and then CO13).
Any suggestions on how to approach this and where to check for missing configurations?
Thanks and Regards,
Gaurishankar

Need help on Production order confirmation cancel issue

Hi,
I need your help regarding Prduction Order issue.
We have created Production Order and issued raw materials and we done paritial confirmation also. Now the order status is PNCF.
After that we notice that it was wrong confirmation so we went CO13 we cancel those confirmations.
But in our zprogram still those order is showing as paritial confirmation order.
I need in which SAP table confirmation status stored and what will be the production order status after cancel the confirmation.
and in which table cancel production order confirmation data will be availiable.
please guide me
sateesh

HI,
There is No Standard Status for Reversing or cancelling the Confirmation.
Generally, When you confirm the status PCNF or CNF gets active.
When you reverse it theybecome inactive.
also let us know, whether You cancelled or reversed the confirmation or revesed the GI postings.
If you have reversed the GI postings using Reverse Movement type or Materail documents, it is possible to have the PCNF order status unchanged.
Regards
Ratan
Edited by: Ratan on Aug 28, 2009 7:23 PM

Checks in userexits of production order confirmations from PDC in CO16N

Hi,
we are using PDC interface for production order confirmations. This is done by Idoc type PPCC2PRETTICKET01 (time ticket) based on BAPI BAPI_PRODORDCONF_PDC_UPLOAD_TT. Standard confirmations are working well. In case of SAP detected errors the confirmations are registered for error handling in CO16N.
So far so good but we have some own check logic implemented in confirmation user exit CONFPP04 and BADI WORKORDER_CONFIRM. These checks are working fine whith online confirmations in CO11N but not in background PDC Idoc processing. I checked the function module EXIT_SAPLCORF_104 for exit CONFPP04 but it has got no exception. The call in SAP processing is like this:
      CALL CUSTOMER-FUNCTION '104'
           EXPORTING
                CAUFVD_IMP    = I_CAUFVD
                AFVGD_IMP     = I_AFVGD
                AFRUD_IMP     = E_AFRUD
           IMPORTING
                AFRUD_EXP     = LS_AFRUD
           EXCEPTIONS
                ERROR_MESSAGE = 01
                OTHERS        = 02.
CASE SY-SUBRC.
    WHEN 0.
    WHEN 1.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO WITH
              SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4
              RAISING CONF_DATA_FALSE.
    WHEN 2.
      MESSAGE E174 RAISING CONF_DATA_FALSE.
How can I throw the exception when there is no exception defined in the function module interface without modification?
As 2. option I wonder if it is better to implement the check logic in the BADI WORKORDER_CONFIRM Method AT_SAVE. This has got an exception ERROR_WITH_MESSAGE. But I don't know if this will lead to CO16N registration of the confirmation.
Any hint how I can solve the problem to apply the online checks in CO11N also to PDC interface confirmations with CO16N in error case?

Hi Michael,
First, I think that the BAPI that you are looking for is: BAPI_PRODORDCONF_CREATE_HDR
Second,
I don't think that in the framework of such a forum it can be explained in detail how to use BAPIs; nevertheless, here are some highlights:
A BAPI is an executable piece of code that can be called from either an external program within SAP (Z program), or called from an external system either via RFC, or as a web service (depends on your NetWeaver release).
As such, it has input (import) data that you transfer when you call it, and output (export) data that you recieve when it ended processing.
More detailed information, documentation, and a description of the import/export parameters, as well as error handling, one can find in SAP by calling transaction BAPI.
Regards,
Mario

Using employee in production order confirmation

Similar Messages

Maybe you are looking for