Using Enter key from numeric keypad to enter and switch to next element in an array control

Hello all,
I have a question regarding a simple but annoying problem, of which I did not found a solution yet.
I have written an application in which I have to enter data manually in a numeric array control.
If I want to enter the value and go to the next element in the array control, i am forced to use the Tab key on my keyboard, or risk RSI using the mouse.
How can I assign the Enter key of the numeric keypad section of my keyboard to to the same as the Tab key?
Kind regards,
Raymond

[email protected] wrote:
Can you convert the example in a image or can you convert in to 8.2.1 version?.
Best regards
Saved in 8.2.1 for you.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Change Array Event.vi ‏16 KB

Similar Messages

Can I use product key from Windows 7 32bit to 64bit?

Hi, i have a Toshiba L505-10V and the original cds(2) with Windows 7 prenium 32-bit.
I have downloaded windows 7 prenium 64bit from here http://www.techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
I use the key from 32 bit but it says its not valid. Is it possible to work with the same key?
Also i download belarc to recoginise my 32bit windows key and it shows me different key from that is on the base of my pc.

Hi
According notebook specification your notebook was delivered with preinstalled Win7 64bit Home Premium and you got 32bit version on recovery DVD.
Both recovery versions are designed for your notebook model and both versions contain activation code so that both versions must not be activated.
I presume you didnt create recovery disc for preinstalled Win 7 64bit version.
You cannot use product key listed in 32bit version. If you use own Windows version you must enter valid product key that you must buy from Microsoft.

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost?

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
2. iPad 2, 16GB White with Sr. No.DL*******KPH
Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
Thanks & Regards
A K Vij
<Personal Information Edited by Host>

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

Ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

I want to use the audio from one of my clips and the video of another can I do this?

I have two different video clips that I took from my still camera. I want to use the audio from one of the clips and the video from the other at the same time in imovie can I do this and if yes how

Yes.
First go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now, drag the clip with the Video into the project.
Drag the clip with the Audio and drop it on the first clip at the frame where you want it to begin. A popup menu should appear. Choose Audio Only. You may then want to open Inspector for the video clip (by clicking the little gear icon at the top left of the clip) and going to the audio tab. Here you can turn down the volume of the video clip, so that all you hear is the audio clip.
Another way. Put the video clip that has the Audio you want in first. Then drag the clip with the video you want and drop it on the clip that has the audio you want. A popup menu will appear. Choose CUTAWAY.

Capture ENTER key on numeric keypad

I have several chemistry tutorials where users type something and then have it evaluated by pressing the ENTER key. This works fine for the ENTER key on the main part of the keyboard, but does not work for the ENTER key for the numeric keypad on keyboards with the two ENTER keys. How do I capture the ENTER key on the numeric keypad? In other words, how do I do the equivalent of the following for that key?
if the key = RETURN then
Thanks

Try checking:
if _key.keyCode = 36 then ...

Using calculator application without numeric keypad?

Hello,
I have a little but very frustrating problem. I was bought a new MacBook in the last week to replace my old PowerBook 12". Everything is fine, I like the new machine but the numeric keypad is missing. This isn't a catastrophic problem, but I can't use the calculator application only using the keyboard! Why? In the calculator application doesn't support the multiplying key (AltShift,) if you are using Hungarian keyboard layout. Any other function is working fine (add, sub, div). With the numeric keypad we can handle this problem, but without it: no!
So anyone can help me how I can solve this problem?
Best regards,
Peter

I'm not used to Hungarian keyboards but am I right that the multiplying key is the one with the 'Ú' (just googled it)?
Then you should try to access it with ALT+Ú ... NO shift.
Maybe this could work. Just give it a try =)
Edit:
Hm or it could be the '-' key...
But I found something interesting on the net:
http://blog.felho.hu/hungarian-unicode-qwerty-keyboard-layout.html
It's an apple keyboard there =)
Message was edited by: Oerle

Number 2 key on numeric keypad does not work. All other keys work properly.

The number 2 on the numeric keypad does not work. Is there some way to clean it? If not how do I go about ordering another keyboard?

inside the remote there is a micro switch for each direction each can break
so yeah you could be the first who write about the right arrow key microswitch being broke in your atv

How to install Vista using product key from bottom of Satellite P200?

Hello all,
I recently had to replace my HDD as my P200 had a fatal error, corrupting all data on the old HDD. I have no recovery discs at all, (None were supplied), and wondered how i am supposed to re-install Vista using my product key from the bottom of the laptop? Can anybody give any kind of assistance please?
As i have been reading other related threads i get the impression that i need to approach Toshiba and buy a recovery CD, at my expense. Is this correct?
Thanks
Lee

Hi
As far as I know the serial key which is placed at the bottom of the unit would not work with other Vista versions! the key belongs to the OEM Vista version preinstalled by Toshiba.
As mentioned by Jeka, you will need to order an recovery disk or will need to use an clean Vista CD with an own serial key purchased previously.
Greets

Space key on numeric keypad

Is there a way to not have the 'space' key on the numeric keypad take you back to the alpha keypad? I looked at the user guide and in settings and don't see anything relevant. It seems strange to assume that a 'space' means take me back to alpha mode.
Thanks in advance,
RWS

No option to set to not have it do that.
As far as "strange" I would say the majority of the time a user accesses that keyboard to put in a comma, period, quote, etc and after typing the punctuation one does want to go back to alpha keyboard so the majority of the time it is helping users be more efficient.

Numeric keypad quit working and does not connect to the bluetooth

my wireless bluetooth numeric keypad is not connecting

Hello Gneel01,
I found an article with steps you can take when you have issues with a Bluetooth device not connecting. I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thank you for using Apple Support Communities.
Best,
Sheila M.

Using unlocked iphone from canada in finland, england and the us

Can an unlocked iPhone 4s purchased in canada work in finland, england and the US?

An unlocked phone is simply that, unlocked. It can work on any GSM network. I got my iPhone from Canada, live in NZ and travel to Australia, Europe USA. It works everywhere.I travel to.

I have changed my windows system from 8 to 8.1 and i lost photoshop elements 11 what now?

After a problem with a virus i change my operating system from 8 to 8.1 and i lost my photoshop elements 11 who is part of a pack of other software, i don't remember if i had regist the program or not but i remember i have used the program validate normal for this i change email's with adobe with the process of validation where are those email's

Hi,
You can download the trail version of the PSE from Download Photoshop Elements products | 13, 12, 11, 10 and then provide the serial key to get the full version privileges.
Do let me know if you need any other assistance.
Thanks,
Swapnil

All websites I visit everyday are blocked by a virus that appears to be from Mozilla (but isn't) and wants personal info to unblock the parent control. My viru

I tried to go to websites I visit everyday and they are all blocked by a virus that appears to be from Mozilla (but isn't) and shows mozilla logo and said my website was blocked by Mozilla parent control and you have to sign up for it. It asks for all the personal info that you NEVER give online so I knew it was a virus. I am writing this in safe mode. My Vipre will not pick up this virus and Malware bites won't either. I deleated Mozilla and reinstalled it but it didn't work.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

CL_GUI_ALV_GRID Problems when using enter and f4 in one ALV

Hi guys,
i have the following problem:
I Use a ALV, which has a column MATNR. The ALV provides the standard search help for this field automatically. so far so good. BUT i also need to read additional data, such as GLD, Material shortext etc, when the users presses the Enter Key.
Here is my coding:
      CLASS lcl_events DEFINITION
CLASS lcl_events_0300 DEFINITION.
PUBLIC SECTION.
    METHODS:
      handle_data_changed
            FOR EVENT data_changed OF cl_gui_alv_grid
            IMPORTING er_data_changed sender.
ENDCLASS.                    "lcl_events DEFINITION
The problem that occurs: if i select a material via f4, i just can add one material to the alv. if i place the cursor into the second line, press f4 again, the alv overwrites the MATNR in the first line
i think the problem has to do with the fact, that the alv runs throug my enter event, when pressing f4.
thats how i registered my event:
g_o_alv_grid_bart_0300->register_edit_event(
EXPORTING
   " i_event_id = g_o_alv_grid->MC_EVT_MODIFIED ).
     i_event_id = g_o_alv_grid->mc_evt_enter ).
...und EventHandler zuweisen
CREATE OBJECT g_o_alv_events_0300.
SET HANDLER g_o_alv_events_0300->handle_data_changed FOR g_o_alv_grid_bart_0300.
kind regards, mark
Edited by: Mark Wagener on Aug 19, 2010 11:39 AM
Edited by: Mark Wagener on Aug 19, 2010 11:40 AM

Sorry for forgetting the impl. part of the class!
      CLASS lcl_events_0300 IMPLEMENTATION
CLASS lcl_events_0300 IMPLEMENTATION.
METHOD handle_data_changed.
HandleDataChanged                  ***
    DATA: ls_good                TYPE lvc_s_modi.
     FIELD-SYMBOLS: .
alle Inhalte der geänderten Zellen in die interne Tabelle schreiben
    LOOP AT er_data_changed->mt_good_cells INTO ls_good.
Dazu auf die richtige Zeile in der ITAB positionieren:
      READ TABLE INDEX ls_good-row_id.
      IF sy-subrc = 0.
Und das geänderte Feld dem Feldsymbol zuweisen
        ASSIGN COMPONENT ls_good-fieldname OF STRUCTURE .
        IF sy-subrc = 0.
Feldwert zuweisen
          -matnr
        AND bwkey = werks.
ENDLOOP.
Und neu ausgeben
    g_o_alv_grid_bart_0300->refresh_table_display( ).
ENDMETHOD.                    "handle_data_changed

Using Enter key from numeric keypad to enter and switch to next element in an array control

Similar Messages

Maybe you are looking for