Using eStorage flags as unknown access from the US
Hi,
Google flagged I had some unusual activity against my account, which appears to be hp.com..
It appears this is from using eStorage to scan and upload some documents yesterday (I live in the UK).
I'm assuming eStorage attempts to access your account from hp.com rather than from my home IP?
Thanks
Hi DEVans,
Yes, during the upload process, the files are transferred from HP server to the Google server.
Did you encounter any issue with the upload?
Thank you.
I am an HP employee
**** Please mark the post that solves your problem as "Accepted Solution" ****
Similar Messages
-
Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple
It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly. -
hi, I need the program of access from the office, so i'm going to but the Microsoft office 365 university, will i have to but any other program to use the access from my mac? or to open any database that I will have did from any other computer (not mac)?
There has never been a Mac version of Access. Microsoft never created one, realising that it was very inferior to the FileMaker Pro database application.
So if you must run Access you will have to run Windows on your mac. -
How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.
Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
Is it tall like this.
Then it is Gen5.
otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
Open the Airport utility and give us a screenshot of the summary page.
That will also help us determine that you have the TC, which version and how it is setup.
You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
You do not do anything in the TC.. set it up in the Ubee router.
Port forward 548 to the TC in the Ubee router.
And make sure the TC has a static IP in the Ubee router.
Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
You are fighting hard because Apple made this hard.. not easy. -
iDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops that the viewer access from the main menu to play along with
Export the slideshow out of iMovie via the File ➙ Share ➙ File menu option as a 480p Quicktime movie.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
How to remove app designer migration access from the Developer id
Team,
Please guide me with steps to remove app designer migration access from the Developer id.
I want that developer can create the project but do not have migration access.
Rgds,Did you already remove the other permission lists/roles you identified in your previous response like I told you to do in my first response? The user can have no permission lists that grant this access. Working with a clone of VP1 is a bad strategy. Security should be handled from the bottom up, adding what is required for a user to perform their necessary functions. Cloning VP1 and removing roles/permissions is security from the top down and will undoubtedly leave you with a user that is still granted more access than you like even after removing this particular access. You should really be working with your companies security admin on this, they may have a standard way of doing this. Many places I've been use custom roles and permission lists when deviating from the Oracle delivered security.
Does ABC user still have any access to UPGRADE?
select ru.roleuser, ru.rolename, rc.classid, ai.barname from psroleuser ru
join psroleclass rc on ru.rolename = rc.rolename
join psauthitem ai on ai.classid = rc.classid
where ai.menuname = 'APPLICATION_DESIGNER'
and ai.barname = 'UPGRADE'
and ru.roleuser = 'ABC' -
RD Web Access From The Internet/External
I’m requesting help with accessing from the internet (external web) a RD Web Access Connection (SSL) that I setup and configured on a Windows 2008 R2 Server.
My setup is as follows. All server rolls are configured and running on one Windows 2008 R2 Server (VM).
1.
Remote Desktop Services
a.
RemoteApp Manager
b.
Remote Desktop Connection Manager
c.
RD Gateway Manager
d.
RD Session Host Configuration
e.
Remote Desktop Service Manager
f.
Remote Desktop Licensing
2.
Web Server (IIS)
All my configurations are working perfectly internal/intranet. I can access all published applications and remote desktop connectivity via (SSL) from IE 9 web browser.
The URL that is used internally is: (https://ServerName/RDWEB).
When I attempt to connect via the internet I’m getting an “Internet Explorer cannot display the webpage” message.
I’m using Dynamic DNS to access the server hosting the (IIS Remote Access Web Page URL), example (https://DDNS/RDWEB). I’ve opened ports 443 & 80
on my Untangle firewall, also port forwarding for 3389.
Any and all help will be appreciated.Freek,
Thank you for your response. I tested Telnet as you suggested, and both FQDN and IP address were able to establish a Telnet connection to my RD Web Access Server.
The “NSLOOKUP” resolved the DNS server name. Also, I am able to us the IP address, URL (https://IP/REWEB) in IE9 to browse to my RD Web Access Server site. The above should confirm DNS IS working correctly within my internal network.
My connection issue is from external/internet access to my RD Web Access Server site. All my networked devices (internal) are natted IP assigned behind an “Untangle
Gateway” firewall and routable internally only.
Although, I’ve opened ports, created firewall rules to pass traffic on ports 443, 3389 my problem still exist. Since my internal natted devices are not routable
from the internet, I am using a DDNS host URL from (www.dyndns.org) to route from the internet to my internal site server. As it stands now, I suspect the problem maybe at the Untangle Gateway”. I will focus my attention there.
Thank you again for your help.
Aubrey R. Martin -
Non-static variable cant accessed from the static context..your suggestion
Once again stuck in my own thinking, As per my knowledge there is a general error in java.
i.e. 'Non-static variable cant accessed from static context....'
Now the thing is that, When we are declaring any variables(non-static) and trying to access it within the same method, Its working perfectly fine.
i.e.
public class trial{
���������� public static void main(String ar[]){ ////static context
������������ int counter=0; ///Non static variable
������������ for(;counter<10;) {
�������������� counter++;
�������������� System.out.println("Value of counter = " + counter) ; ///working fine
�������������� }
���������� }
Now the question is that if we are trying to declare a variable out-side the method (Non-static) , Then we defenately face the error' Non-static varialble can't accessed from the static context', BUT here within the static context we declared the non-static variable and accessed it perfectly.
Please give your valuable suggestions.
Thanks,
JeffOnce again stuck in my own thinking, As per my
knowledge there is a general error in java.
i.e. 'Non-static variable cant accessed from static
context....'
Now the thing is that, When we are declaring any
variables(non-static) and trying to access it within
the same method, Its working perfectly fine.
i.e.
public class trial{
���������� public static void
main(String ar[]){ ////static context
������������ int counter=0; ///Non
static variable
������������ for(;counter<10;) {
�������������� counter++;
��������������
System.out.println("Value
of counter = " + counter) ; ///working fine
�������������� }
���������� }
w the question is that if we are trying to declare a
variable out-side the method (Non-static) , Then we
defenately face the error' Non-static varialble can't
accessed from the static context', BUT here within
the static context we declared the non-static
variable and accessed it perfectly.
Please give your valuable suggestions.
Thanks,
JeffHi,
You are declaring a variable inside a static method,
that means you are opening a static scope... i.e. static block internally...
whatever the variable you declare inside a static block... will be static by default, even if you didn't add static while declaring...
But if you put ... it will be considered as redundant by compiler.
More over, static context does not get "this" pointer...
that's the reason we refer to any non-static variables declared outside of any methods... by creating an object... this gives "this" pointer to static method controller. -
How do I turn off the Camera access from the lock screen
how do I turn off the Camera access from the lock screen ?
Only by hiding the camera via Restrictions. Settings>General>Restrictions. That hides the camera when unlocked unless you go to Restrictions and unset that Restriction. That is not way currently from just preventing camera access only from the lock screen
-
Why can I not adjust the volume on a video when accessed from the lock screen
Why can I not adjust the volume of a video in my pictures folder, when accessed from the new lock screen option?
There is no way to access videos directly from the lock screen.
What exactly is being attempted here? -
why can't i sign in in the apple store using my apple id? but from the itunes application in my computer which i downloaded, i can use my apple id to sign in...and while opening my apple store in my phone it appears blank..i don't know what happened?
It's a straightforward port-forwarding issue.
You need to forward ports to the internal ip address of your apple tv as follows:
TCP 123
TCP 3689
UDP 5353
TCP 80
TCP 4343
TCP 53
This may also solve other problems you may have with homesharing... -
have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help
Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.
-
Can I use Topaz plug ins with PS from the cloud?
Can I use Topaz plug ins with PS from the cloud?
Can I use Topaz plug ins with PS from the cloud?Your Creative Cloud account allows you to install software on two computers, regardless of operating system. Just log in to Creative Cloud from your second computer and install the app. See http://www.adobe.com/products/creativecloud/faq.html.
If you opt to do so, your files will be synched between the machines and Creative Cloud itself.
--- Ben -
'''My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)'''
There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
*[[/questions/955140]] why is the 20.0 address bar unresponsive?
This is currently investigated and tracked via this bug report.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working (roaming profiles;UNC path support OS.File)
<i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i> -
Good Morning,
We are getting this error
Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers
of the appropriate version can be accessed from the Internet
We installed a new Exchange 2007 CAS on Windows 2008R2. Got rid of old CAS on Exchange 2007. Now seeing this error. Does anyone have an idea??Hi,
If the issue persists, I recommend you install Exchange 2007 SP3 RU7 and check the result. Also, ensure that Exchange 2010 SP2 RU1 or later version is installed. Old Exchange version may lead to the CAS-to-CAS proxy incompatibility.
What's more, here are some helpful blogs for your reference.
Exchange 2010 SP2 RU1 and CAS-to-CAS Proxy Incompatibility
http://blogs.technet.com/b/exchange/archive/2012/02/17/exchange-2010-sp2-ru1-and-cas-to-cas-proxy-incompatibility.aspx
OWA Coexistence With Legacy Versions
http://blogs.technet.com/b/sjimmie/archive/2010/07/09/owa-coexistence-with-legacy-versions.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support
Maybe you are looking for
-
My iphone wont connect to the internet, help me
my iphone wont connect to the internet, help
-
Hi! How do you save everything, related to a project, in one folder? Audio, video....everything. In order to move it to another computer. In order to open an old project, and not missing anything. JanD
-
Hi, I have a Oracle 10.2.0.4 Standard Edition database with a manual physical standby on a remote server. To synchronize my stnadby, I'm forcing a log switch then I copy the archive log on the standby site for recovery. I'm having several "Checkpoint
-
When updating via iTunes from 7.0.2 to iOS 8 was error -1.
When updating via iTunes from 7.0.2 to iOS 8 was error -1. It saids to me that i need to restore my iPad to factory settings. But i have too many images needed to me. I have no restores (but iTunes make one before updating). How i can to restore my p
-
TS1702 How to cancel the auto renewal subscription for Australia Women Weekly
I purchased Australia women weekly 6 month subscription before, and now I want to cancel it. Itune auto renewed my subscription for another 6 month laterly.How can I cancel the auto renew now?