Using Ethernet network and Wireless to connect to ARD

Hi, I am using ARD to connect 2 mac minis, 1 macbook pro and a G4 powerbook. I have been having some serious issues with trying to network them all together. When I connect 3 of the machines using ethernet and an airport extreme everything is fine, but the 4th machine is uncontrollable. It shows up on the scanner but shows up as offline. Has anyone had any luck using a combination of ethernet and wireless? It is all through the same network, but the hope is that the 2 laptops can connect wirelessly to the mac minis.

MATT BANEY wrote:
No my DSL modem is not a dumb one, its a DSL modem router, "qwest Actiontec dsl modem wireless gateway", GT701.
To avoid confusion in future support threads, you should refer to that as a "router" or "modem/router", rather than simply as a modem.
This configuration works fine, both computers are on the network, get assigned different IP addresses by the DSL Modem, and most of the time can see each other and the internet just fine, as long as the iMac keeps the Network settings that I set, for the IP address of the DSL-Modem router ("xxx.xx.0.1"), but occassionally after a restart it will revert back to using "xxx.xx.1.1" for the router IP address which is not a valid IP address on my LAN.
Why would the iMac try and use the old settings when I specifically set and LOCKED the correct settings?
If the "modem router" is configured to be a DHCP server and if your computers are configured to get their network settings via DHCP (Network panel of System Preferences, "Configure IPv4" set to "Using DHCP"), then in theory you shouldn't have that problem.

Similar Messages

Can AirPort Extreme join a wireless network and share the connection to ethernet connected devices?

Can AirPort Extreme join a wireless network and share the connection to ethernet connected devices?

Yes, if the AirPort Extreme is joining a wireless network that has been created by another Apple router. In this case, it will be extending the wireless network and the Ethernet ports are enabled on the "remote" AirPort Extreme.
No, if the AirPort Extreme will be used with another router from another manfacturer.
Ironically, the less expensive AirPort Express can do what you ask about with virtually any wireless network using a special feature called ProxySTA. It won't extend the wireless with a non-Apple router, but the Ethernet port will be enabled.

Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

Question
Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

Using Ethernet only and not USB - why?

Hi,
I'm fairly new so please help if you can. Have ADSL cable modem and have had problems connecting to internet. Phoned my ISP helpline and they said to take out the USB lead from the modem which I have done and its all now working. Basic question but what is difference between ethernet and usb? If now only using ethernet will my speed or anything else be affected.
Thanks
Dee

Some Mac functions are reluctant to work well with USB.
The short answer to your question what is difference between ethernet and usb: These are two different methods for sending data from one device to another.
USB 1 is used for example, to connect the mac keyboard to the computer. It works fine, because high speeds are not needed. USB 2 claims much higher speeds, but they are seldom achieved in real life. Strictly speaking, USB is not a substitute for ethernet, since it is only used for very short connections, whereas ethernet can work over distances of many kilometres.
Ethernet comes in flavours as well; you will see terms like 10 B/T, 100 B/T etc. These describe the density of the data that can be carried. Since ethernet has been around since the very early days of computers, its use for communication is pretty much trouble free, and just about every ISP uses it and depends on it. To my knowledge, there no computer networks, where large amounts of data are moved around, that use anything but ethernet.
All of the above is an attempt to provide a simple answer! The crux is that you are better off using ethernet than USB for the connection between the Mac and the modem. I trust that will allay any concerns you have.

Is there a way to force which wifi network and proxy clients connect to from WGM?

is there a way to force which wifi network and proxy clients connect to from WGM?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

On my wireless printer can i use both usb and wireless at the same time

i tried to print from coupons,com but it will not i have used coupons.com before with my other printer and weorked fine i have coupons.com looking into it
just wondering if anyone else out there have the same problem

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Assigned F key to play an action does not work. Why? Using cs6 iMac and wireless key board

Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6 iMac and wireless key board.
Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

*** Moderator Action ***
This networking question has been moved from the Solaris 10 discussion space,
to the Solaris Networking discussion space, for closer topic alignment.
Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7.

Can't i use xml schema and oledb data connection at the same time?

Hello to all and thanks in advance.I use xml schema and oledb data connection at the same time and the problem is that when I try to export the xml, the outcome is not what i expect.Without the oledb connection everything is ok (just the schema) and the xml complies with the schema.
Can't i have both schema and oledb and the exported xml be as i want it?

You can use both at the same time, but not gor Internet access if that's what you're asking.
Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
Sorry.

HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

Using both wired and wireless network Access?

I have a ThinkPad 510 with a docking station. Within the same room, connecting to the same network I may use the WiFi with the TP only, or connect using the docking station which is hardwired to the network. TP has W7 installed.
What is the correct procedure for bouncing between these two environments? Is there a setup which will allow
'automatic' access, depending on whether I'm using the docking port, or not?
Thanks,

in the Thinkvantage Access software, you can set the network preferences. So you can set the Ethernet to be your most preferred network connection method, while your wireless as the second most preferred method. Or which way you prefer.
So for example, when you dock and the computer detects the ethernet network connection, it will automatically switch to the ethernet as it becomes available. And when you undock, your computer will switch back to wireless as ethernet is not available.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

Can you use a roaming network and wireless extender at same time?

Greetings community - I've been struggling with an attempt to extend my wireless network for some time now. Please forgive my ignorance on the topic - I realize how 'simple' this is for many of you. Let me summarize:
What I have functioning:
1. Comcast telephony modem
2. 5th gen Airport Extreme as main wireless router connected to modem via Ethernet (corner of floor 3)
3. 2nd gen Airport Express as wireless extender (hooked to a stereo on floor 2)
What I want to accomplish:
1. I have poor wireless signal on my sun porch (corner of floor 1 opposite side of building as modem)
Extra equipment I have:
1. Another 5th gen Airport Extreme
2. Another 2nd gen Airport Express
What I have tried (and failed at):
1. Initially I set up the second Airport Extreme as a second wireless extender and placed it at a further point away than my first wireless extender. I quickly realized that set up does not function appropriately and one cannot connect to the further extender (I read about that on the apple forums).
2. I tried placing the second Airport Extreme in a different part of the house at equal distance from the main router as the first wireless extender. It's capability to extend was minimal if any.
3. I tried connecting the Airport Extreme to the main router via an Ethernet cable with the hopes of creating a roaming network (which I read about on the apple forums). I would have to come up with a way to run the Ethernet through the house but I'm willing to cross that bridge later. Once I got that set up, the 2nd gen Airport Express which was previously set up as a wireless extender is no longer recognized. Argh!!
Questions/Theories/Suggestions:
1. Is it possible to have a wired extender (via Ethernet) function at the same time as a separate wireless extender all connected to the same router? If so how do I do it?
2. I thought about keeping Airport Extreme #1 wireless connected to Airport Express #1 and call that Network 1. Then plug Airport Extreme #2 directly into the modem to create Network #2 and use Airport Express #2 as wireless extender. When I tried plugging both Airport Extremes into the modem, they both stopped functioning.
3. Do I get a second modem to put somewhere else in the house and use Airport Extreme #2 and Airport Express #2 in that fashion? My guess is Comcast will try to charge me a separate internet access fee to do that (boo!!).
I know there are a lot of brilliant folks out there. I'm sure someone can read this and see the 'obvious errors' in my ideas and attempts. I'm certainly open to new suggestions as well.
Thank you in advance for your time and advice.
- The New Guy

Is is possible to rename the AEx 2 a different network name from the AEx1 and AE 1 (even though they are all connected to each other)? And say it is possible, would that potentially preventing the jumping?
No, in extend wireless the names must be the same..
However since you are creating a network on AE2 which is extended by AEx2 then you can indeed use a different name.. but it must be both,, AE2 and AEx2.
2. Even more crazy - if I did (could) give the AEx 2 a different network name, could I use my AE 2 as a wireless extension to that second network? Or is this just getting out of hand now?
You have lost me now.. there are ways and means.. but let me recommend a better solution.
Use EOP (homeplug in US) adapters if you cannot run ethernet. Multi-storey houses where you have heavy concrete construction are never going to work well with wireless alone. You are much better getting ethernet properly installed (which is the only 100% guaranteed method).. or buy a set of EOP adapters and give them a try.. they work in some cases and not others.. but better than wireless when they do work.
Otherwise I think you need higher power wireless routers.. but I can suggest you do the setup in a more controlled manner.
In other words do not use auto as per the airport utility.. use very short wireless names, different for both bands.. and fixed wireless channels.. then test which band works better.. Then you can do a link.. which will be slow but might give you better performance.
So..
Link1 Main AE1---- AEx1 This is wireless extend.
Link2 AEx1--ethernet--AE2. AE2 is in bridge mode and is also set to create a wireless network. (Use different wireless name here to prevent confusion).
Link3 AE2-----AEx2 Second wireless extend.
This overcomes the Apple limitation on multiple extends. It is not great setup but might get wireless to where you need it.. And better speed than you can get now.
NOTE>. I would personally never do this.. I will run ethernet forevermore.. having tried and tried in various places and using all kinds of equipment.. my conclusion is.. wireless is not suitable.. unless you can get enough signal in from one AP.. everything behind it must be ethernet.
It is much more expensive in some cases.. but ethernet works.. nothing else can be guaranteed to work.

Using a wired AND wireless network on one machine for better security

It occurs to me that if I could separate my Internet traffic from my LAN traffic, I could have the best security setup, so that machines on my network would only have file sharing enabled for the WIRED connection and I would use the Internet over the WIRELESS connection.
How do I configure my PowerBook and Mac Mini to do this? In the Sharing preference pane, it doesn't allow me to specify which network port the sharing will be active on.
And once I am conncected to both a wireless and wired network, giving each machine 2 IP addresses, how does the computer know to route the IP addresses to the right port?
I'm using an Airport Extreme Base Station (connected to a cable modem) configured to distribute IP addresses to the wireless ports on the computers for Internet and a Linksys router distributing IP addresses to the ethernet ports on the computers with sharing turned on.

in the Thinkvantage Access software, you can set the network preferences. So you can set the Ethernet to be your most preferred network connection method, while your wireless as the second most preferred method. Or which way you prefer.
So for example, when you dock and the computer detects the ethernet network connection, it will automatically switch to the ethernet as it becomes available. And when you undock, your computer will switch back to wireless as ethernet is not available.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How to use both wired and wireless connection with static addresses

Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

Using Ethernet network and Wireless to connect to ARD

Similar Messages

Maybe you are looking for