Using Ethernet to access Sky broadband

My daughter's old eMac is back home and I am trying to connect it to Sky broadband but struggling to correctly complete the information on the network screen. Any guidance on whether it's TCP/IP or PPPoE and what boxes to tick . Every combination seems to produce 'The specified Server could not be found'
Thanks

Thanks for this but I'm afraid that it still isn't working.I'm using OS X 10.2.8. On the network screen I've selected :
location - Sky
Show- built-in ethernet
I've selected TCP/IP
Configure - using DHCP
I've put the IP address in the DNS box
There is an ethernet address but I don't know where that has come from
I'm using a Netscape Router to assess the internet by wireless on my PC laptop and have slotted the ethernet cable into the back of the router and into the eMac. On my laptop I had to say that nit was channel 11 but can't see where to do this on the e Mac.
I'm afraid that I'm not much good with this and my daughter only ever got it to work through trial and error and hasn't been able to figure it out this time.
thanks

Similar Messages

I have sky tv and sky unlimited BB does anyone know if I could use ATV to access Sky Anytime ?

I have sky tv and sky unlimited BB does anyone know if I could use ATV to access Sky Anytime ?

doubt it very much
can't think of any feature added to atv's which was not relevant to Americans
and they have their sports thingy and netflix all ready
same deal with iplayer from bbc it's only there using airplay

HT1515 Can I use Air Port express as a signal extender for SKY Broadband router in UK?

Can I use Air Port express as a signal extender for SKY Broadband router in UK?

You are going to have to turn OFF Wifi on the Sky router device so its just a modem.
String an Ethernet cable off of the Sky router to an Apple Airport/Time Capsule device and have that create a stable WiFi network.
Using WDS protocols you can now add additional Apple Airport expresses as needs be to extend the Wifi signal area.
In theory you should able to extend an existing network however inter-operability between differing manufacturers is flaky at best.
Caveat using extenders Will degrade the performance of your network.
So its going to be more expensive - Need Two Airport devices and you my need support in creating the network (you may have to log in to the Sky provided routers advanced settings in the Java Control Panel and from a web browser to turn off features such as Wifi and IP addressing)
You may be better contacting Sky as they may actually have a compatible network extender (BT certainly do for their Home Broadband routers) available.

TS1398 have been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any idea

my ipad 4 has been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any ideas?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Am I able to connect my Airport Extreme direct to my Sky Broadband?

I have Sky Broadband which comes with it's very own router - but I connect my Airport Extreme to this router and use my Airport Extreme for my wireless network.
Reason why I want to know is because I need to Forward Ports on my AE but it is conflicting, and apparently it's because I am in Bridge mode.

Hmm,
Well I followed this -> http://www.skyuser.co.uk/forum/sky-broadband-tutorial-section/10975-how-set-up-p ort-forwarding-internal-web-server.html
but guessing it's maybe not exact to what I need to do.
Basically I am running Daylite Server and I need to forward ports to allow me to access my Daylite database away from the network.
According to the Daylite folk, I need to have this information:
http://cl.ly/8tSn
Driving me mad.

Can't extend network with Airport Express on Sky Broadband

Hello,
I'm having some difficulty that's driving me bananas!
I've recently moved house and got Sky Broadband. They sent me their Sagemcom router and the setup was easy. I thought I'd do what I always do. I'll connect my Time Machine to it via ethernet, and connect via Time Machine's network. Then I have two Airport Expresses in the house to extend the network and use Airplay etc.
I can set up the Expresses with no problem, everything talks to everything without a problem and the lights are all green but the network isn't getting extended with either of them. I refuse to believe they're both broken as I also borrowed an Express form my Dad's house (which extend the network without a problem) and it doesn't work with me.
Extend my network is checked in the Manual Setup in Airport Utility but for the life of me I can't get my network extended.
I have done tests where I replaced Time Machine and made one of the Expresses the main base station and it throws signal out easily like that but I can't extend that network with the second Express.
I followed this thread https://discussions.apple.com/message/13171691?messageID=13171691 and have tried a few things to no avail. Currently I have configured an old Airport Extreme (just to keep testing) which works great and have set up an Express wirelessly. All lights are green and the settings seem to all be correct. I turn wifi off on my computer and connect to my computer from the Express using ethernet and nothing. Should I get a connection like this?
Is it Sky? I have read in a few places that Sky have disabled the ability to extend their network but I'm not eve using the signal from their box.
Any ideas or thoughts will be gratefully received.
Thanks in advance.

OK so I've been tying it out but unfortunately to no success. Everything looks fine and all lights are green but the network isn't getting extended - just as before.
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check Mark next to Allow Wireless Clients
I don't have an option to extend a network, only to join: http://flic.kr/p/a222kR
I do get the option though if I use the guided setup, even though it doesn't work: http://flic.kr/p/a24TQQ
I did try one other thing though. I set up the Time Capsule and it works great. Then I tried instead, to use my Airport Extreme to extend the network. The Extreme did give me an option to extend the network in the drop down menu and a checkbox to Allow Wireless Clients, unlike the Express. I do believe that this is now working. I now need to find the best place to put it to extend the range.
My Expresses are only 802.11g so they're pretty old but as I said, it worked at my Dad's house but not here. Does it make a difference that the Airport Base Station at my Dad's house is an older UFO shaped Snow Airport? I'm becoming suspicious that seeing as I've only ever lived in small houses and apartments that maybe they never worked?? I've recently moved into a more spacious house so could this be the problem?
One final test using iStumbler showed that it could see Apple Network XXXXxX until I configured it. Once it was configured it disappeared from iStumbler. The Airport ID number had gone from the list.
Do I need newer n compatible Airport Expresses then? So many questions pop up now... When I turned my Express into the base station (which only throws out a g network) then surely I should be able to extend to the next Express (which is also g only)? It still didn't work. The Express are on version 6.3 by the way. Having the Extreme extend the network is a good start but I also need the others to work too. Do you think I'm correct in my assumption?
How about WDS, could that work? Will WDS slow the network considerably?
Sorry if this message is rather long and garbled and again, thanks for your interest and advice.

WRVS4400N with Sky Broadband router

Hi
I recently purchased WRVS4400N. Though I am having problems trying to configure the WRVS4400N to work with my ISP's (Sky Broadband) router which in essence is a customised Netgear router.
Basically I want the WRVS4400N to handle all networking aspects such as WiFi, DHCP etc and for the ISP's supplied router to handle just the internet connection. So far I have switched the ISP's WiFi off, turned off DHCP though unable to get the correct setting on the WRVS4400N to use just the internet connection. Any help with trying to set this up would be good ?
Thanks
Andrew

I believe that the WRVS4400N router is one of the latest high end wireless router from Linksys, it has Wireless N capability, DHCP, and VPN. If you just want to use this router for DHCP and Wireless, you can just use the default settings in which DHCP and Wireless were enable by default. I also remeber that the default IP address of this router is 192.168.1.1 in which you can be able to access the configuration page for settings modification.
Message Edited by aponikikay on 08-04-2009 02:47 PM

Sky broadband, airport extreme and extending the wireless network.

Hi - I am a recent apple convert and as such new to all things mac. My current setup is sky broadband, net gear router, w7 notebook, ipad2 and mac mini. My mac mini is in the studio at the bottom of the Garden and currently has no signal. I am trying to extend the signal using an airport extreme but keep falling at the first hurdle. Connecting the sky router by Ethernet to Airport and trying to setup via utility has got me stumped, the unit just flashes orange. In essence what I am trying to achieve is a network off the sky router through airport that enables all my units to work wirelessly and attach a wireless printer and USB hard drive. Is this going to be achievable or have I wasted my money on the airport extreme unit?
Any help or guidance greatly received.
Thanks
AdeP

AdeP wrote:
Hi - thanks for your reply. I have my sky (netgear) broadband router connected to the telephone/broadband point. I have then attached an ethernet cable from the router to the wan port on the back of the airport extreme. When I log into the airport utility it recognises the AEB but it just flashes orange which is where I am stuck.
You mean the Netgear is a broadband modem and router? If that is the case try disabling the Sky broadband router function as it is not compatible with the AEB. If your router is a wireless router, you will have to disable this function then see if you can connect. If your modem is separate from the router, you have to connect directly to the ethernet port of the modem and skip the Netgear router all together.

Sky Broadband + AP Extreme ?

Hi, I've got a Sky broadband connection using their standard wireless router, and airport express also on the network, just for airtunes.
I have an old airport extreme base station , could I join this network upstairs in the house, thus extending our wireless network?
Cheers
M

Could I use Airport Extreme as the main router, and then use the Sky one to extend the signal?
No. Since the Sky router is not compatible with Apple's WDS that won't work.
You could connect the AEBS via Ethernet to the Sky router. Disable the Sky router's wireless interface. Configure the AEBS to act as a WDS main base station. Configure your current AirPort Express (AX) or another AX to act as a WDS remote.

How can I tell if my computer is using ethernet or wireless for downloads?

Hi,
My computer is hooked up via ethernet to my router (base station) which is connected to my DSL modem, and I also have my Airport on because I have extended my network with an airport express so I can stream music to my stereo across the room using iTunes.
I've noticed in the Airport menu that my computer is connected also to my wireless network which I use for getting online with my iPad.
Can I assume that my computer will use ethernet and NOT wireless for accessing the internet, downloading files, etc?
How can I tell which network connection is being used? Are there tools for monitoring the network that would allow me to easily determine if a particular download is going over the ethernet or the wireless connection?
Clearly, I want to use the hard line ethernet connection for everything and use the wifi only for my streaming music function for speed purposes...
Thanks!!!!
Elisabeth

Hi,
Internet is served on the priority basic from the System Prefrences Network pane.
If ethernet is on top you getting it from ethernet if Airport and so on...
So depending on internet speeds set the priority to access fast internet speeds.

Connecting via airport to Sky broadband

Has anybody had any problems connecting to Sky broadband via their built in airport?
When I try to connect my iMac I am unable to do so unless I use a cable direct into the router. The message that I recieve is cannot find PPPoE host.
I have tried contacting Sky and they can only tell me that there is a problem with my mac which I know their isn't.
I would be very grateful if anybody can help

yes - i have the exact same problem - have been plugged in directly for 2 years now - cannot do wireless. I am moving soon - hope I can get router next to Mac lol

Existing Sky Broadband Customer who wants to switc...

Hello everyone,
I am currently using sky broadband and have been for roughly the last 12-18months (not sure on the exact number). I have grown increasingly tired with the poor performance of the broadband they supply so have decided to go for BT Infinity.
First of all I was hoping someone could explain to me how I'd switch providers and what it would entail?
Secondly I was hoping for some general feedback on BT Infinity from some of you guys. I'd love to know if you recommend it or not?
Many thanks!
Chris

hi there, I have just moved from Sky Unlimited to BT infinity option 2.
Speak to a BT sales person, number on website. They will talk you through everything you need to do.
You will need a MAC number from SKY, and SKY have really sharpened up on this. They used to be difficult handing it over, but now if you ask they will email it to you. You then forward that to the email addy of the salesperson at BT dealing with your call.
Diferences; It costs more money, be in no doubt. But as the old saying goes you get what you pay for. The speed in my case went from 8.4mb down / 1.6 mb up (from a package promising 20 mb) with severe slow downs at weekends.... to 81mb down and 19.6 mb up, with zero weekend slowdown.
I have also been told there will be a significant speed bump again late this year for no extra cost.

Connecting two macs using ethernet

Hi All
am attempting to link my iMac and Mabook. I've done it before with a firewire cable, but have forgotten how to. Have tried varios combinations of password and user name, but can't get access to macbook from my imac. Am wanting to transfer photos from macbook to imace.
Saw a post about connecting using ethernet, but equally am not sure how to.
Any help greatly appreciated.
Robert

As Jolly Giant says you need to enable file sharing, though only on the mac you want to connect to. IE, if you want to connect to the MacBook from the iMac you'd enable sharing on the MacBook.
To connect by ethernet, simply plug one end of the cable into one mac and the other end into the other. If you connect to a wireless network using airport and your mac is set to use the airport before the ethernet (see system prefs> network> list at the side shows order) you may have to turn the airport off on one of the computers to ensure you're transferring files across the ethernet (rather than the wireless, which will be far slower).
Once you've connected the cable and turned sharing on the shared computer should show up in the sidebar of a Finder window. If it doesn't, check that Finder is set to show shared computers, in the menubar Finder > Preferences > Sidebar > Tick Connected Servers & Bonjour Computers.
Clicking on the shared computer's icon in the sidebar should connect you as a guest, however at the top of the Finder pane there will be a black bar that says Connected As: you can then connect as yourself and you should be able to see everything on the other computer

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

Yes. The following quotation is from About Windows Migration Assistant
These are the preferred network connections, in order:
Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

My iMac and Netgear Router from Sky Broadband are having problems

Hi, I've got a fair amount of knowledge in these area's. I not long switched to Sky Broadband a couple of weeks ago. The problem lies with the connection to the router that they supply for their service, a Netgear DG834GT. The problem is that my connection to the 802.11g network is extremely slow.
My iMac, even tested in the same room shows 20-30% signal. This compared 2 a Windows Vista laptop at 5bars and top speed downstairs, and two PC's (XP) either end of the house with the same normal signal quality.
Contacting Sky Broadband, they assume that the fault is with the iMac and are state that they can't really help because I am not using a wireless adapter supplied by them (If it's even compatible).
Does anyone know the solution to this? I've heard of many other users with similar problems on different Mac's but no-one seems to have a fix.
Also running bootcamp, ive found my signal strenth to me maximum, but my speed to still remain at 22Mb/s peak, and roughly 1-2Mb/s when browsing the internet.
Lastly I have WPA-PSK enabled, and i've tried adjusting wireless channels without having any luck improving the signal. I would be gratefull if anyone knew any ways to fix this problem, thanks
IMAC INTEL CORE 2 DUO Mac OS X (10.4.8) 1GB RAM, 256 RADEON X1600

Buy the Wireless N adapter from Apple and install it. Even though the only specified effect is adding the N router capability, it fixes the problem you mentioned (worked like a charm for my friend).
Chuck
eMac Mac OS X (10.4.8) 1.42Ghz PPC G4

Using Ethernet to access Sky broadband

Similar Messages

Maybe you are looking for