Using EVOM to transfer MPEG-2 files from camcorder to mac

I have a Sony Handycam and used EVOM to transfer the files (MPEG-2) to the mac iMovie. The date and time the clip was imported is
being used to organize the clips, but I want the date and time the video was taken. Is there a way to do this so that it automatically uses the original date and time the clip was taken?

The reason is that when I save the Imovie I just get one file with an Imovieproject extension, and that will not go into compressor. What do I need to do to get a valid file to be used by compressor.

Similar Messages

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

What do I need to do in order that I can transfer all my files from an old Mac to my new one?

I have just bought, or rather my wife has just bought me a new Mac and I have downloaded the Yosemite Operating system. What I need to be able to do is now transfer all my files , music' photo's and documents to my new Mac. Any assistance would be most helpful.

matt stevenson wrote:
I have just bought, or rather my wife has just bought me a new Mac and I have downloaded the Yosemite Operating system.
A new Mac will come with Yosemite already loaded...
What I need to be able to do is now transfer all my files , music' photo's and documents to my new Mac. Any assistance would be most helpful.
See this -> Move your data to a new Mac - Apple Support

Transfer a shared file from windows to mac

I need to get a file over to my MacBook that's on my Windows machine. I did it a while ago using sftp but I can't remember how I did it. The computer shows up under the Shared sidebar as family but then it asks me for a user name and password. What user name and password do they mean? I have no account passwords on the windows machine and it won't let me go in as a guest. Could anyone help me fix this.

You need to setup a shared folder on the windows machine with guest privileges. You can put that file in the shared folder and access it without a password from your Mac.

How do I transfer all my files from a crashed mac to an external hard drive?

My computer started giving me troubles a week ago, and now it won't boot up at all. It just continually loads at the start up screen with the apple icon and loads for hours on end. I don't have access to another mac, but I bought an external hard drive a few days ago and I have no idea how to or if I can secure all my files.

Do you have your original install discs? Or start up discs for the OS version that is installed on your Mac?

Transfer a xml file from application server to another server using FTP

Hi experts,
I am stuck in this situtaion.
My interface generates a xml file on an application server.
Now i need to read the xml file generated and transfer it to another system using FTP.
I can use READ DATASET to read the file from the application server.
And use the below function modules to transfer it to another system
     HTTP_SCRAMBLE.
     FTP_CONNECT
     CONCATENATE 'put' src_file_dest into variable.
     FTP_COMMAND with command = variable.
     FTP_DISCONNECT.
Now my question is:
   - Is it correct????
   - I am getting an cerror = 3 while using FTP_CONNECT. is it an authorization issue???
     if yes, what is the issue???
   - How to connect the file read from READ DATASET to the FTP Function Modules ????
Thanks and Regards
Gaurav Raghav

Try the following set of FTP commands..
This code gets the file (NOT the content) from the server and sends it to the FTP.
*********start send file to FTP********************
* FTP commands : 1. ascii
*       2. cd
*       3. lcd
*       4. put
call function 'HTTP_SCRAMBLE'
    exporting
      source      = x_pwd
      sourcelen   = dstlen
      key         = key
    importing
      destination = destin.
clear pass.
pass = destin.
call function 'FTP_CONNECT'
       exporting
            user            = x_user
*            PASSWORD       = X_PWD
            password        = pass
            host            = x_host
            rfc_destination = x_dest
       importing
            handle          = hdl.
* COMMAND ascii -->
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd_ascii
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
*command cd SAP\ -->
split x_file at '\' into dummy ftp_file.
concatenate x_cmd1 dummy into dummy2 separated by space.
concatenate dummy2 '\' into cmd_cd.
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd_cd
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
constants: winslash(1)   value '\',
            unixslash(1) value '/'.
call 'C_SAPGPARAM' id 'NAME' field 'DIR_HOME'
                     id 'VALUE' field tempdir.
* command lcd SERVER\usr\....\DIR_HOME --?
concatenate 'lcd' tempdir into cmd_lcd separated by space.
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd_lcd
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
* COMMAND put file -->
concatenate 'put' ftp_file into cmd_put separated by space.
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd_put
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
* command ls -->
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd2
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
call function 'FTP_DISCONNECT'
    exporting
      handle = hdl.
******* end send file to FTP*****
Edited by: Iria Koutsogianni on Jan 19, 2009 11:50 AM

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

I am using a macbook air laptop, i trying to transfer my photoshop files from my macbook desktop to my laptop but it comes up with Error: 1 and advises me to contact adobe support for help.

I am using a macbook air laptop, i trying to transfer my photoshop files from my macbook desktop to my laptop but it comes up with Error: 1 and advises me to contact adobe support for help.

Are you referencing your Photoshop image files, or Photoshop application files?
If the latter, cease and desist at once!
Always install Photoshop from scratch, from the original media: CD/DVD or download.
If the former, please provide details:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I bought a new computer running Lion 10.7.3 and transferred my applications and files from my old Mac using migration assistant but I can't find/transfer my photos from iPhoto and I can't find my old documents such as previous tax returns.

I bought a new computer running Lion 10.7.3 and transferred my applications and files from my old Mac using migration assistant but I can't find/transfer my photos from iPhoto and I can't find my old documents such as previous tax returns.

Look for them on your old computer, when found copy the files to a USB drive and move them to the new computer.

I can't transfer my files from my Power Mac G5 to my Mac Pro using firewire connections. Has anyone else had this issue?

I can't transfer my files from my Power Mac G5 to my Mac Pro using firewire connections. Has anyone else had this issue?

Don't choose from another Computer, because with the older one in Target mode it really isn't a Computer, just a big Firewire Drive, choose From another Disk...

How do I move MPEG audio files from my iPod to my library on my computer???

Can someone tell me how to move MPEG audio files from my iPod to my library on my computer? Somehow all my songs on my iPod are MPEGs and they won't transfer to the library. I really don't want to loose the music, and there doesn't appear to be an option to convert the MPEG to a ACC file while the MPEG is on the iPod. Please help....

iTunes/iPod does not provide a way of copying tracks from an iPod to iTunes except for purchased music. But iTunes can play MP3 files without conversion.
Here are some ways of getting files from an iPod to your PC:
Copy from iPod to PC
It is important not to allow your iPod to sync with an empty library. If it is set to synchronise automatically you will get a message saying your iPod is linked to a different library and asking if you want to sync – it is important to press cancel as syncing with an empty library erases all music from your iPod.
You can also prevent auto sync by holding down shift & ctrl as you plug in your iPod and keeping the keys held down until the iPod appears in iTunes.
Once you are connected, you need to set your iPod to manage music manually.
http://support.apple.com/kb/HT1535
If you have an iPod with iTunes Store purchases on it, you can use it to copy your purchases to other authorized computers.
http://support.apple.com/kb/HT1848
However this is not allowed for other music.
This MacMuse tip tells you how to copy music from your iPod using Windows Explorer, but it is a bit fiddly:
http://discussions.apple.com/messageview.jspa?messageID=797432
Otherwise you can use third party software to manage the transfer, there are a variety of programs out there, some free and some that will copy ratings and counts as well as the music files. Here is a selection, check them out and see what suits you.
http://www.yamipod.com/main/modules/home/
http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage
http://www.copytrans.net/
For a more complete list see:
http://en.wikipedia.org/wiki/Comparisonof_iPodmanagers
There is a useful background article on copying from your iPod here:
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

How do I transfer a music file from my MacBook Pro to my iPhone?

How do I transfer a music file from my MacBook Pro to my iPhone?

If you download Adode Reader (free but very limited) or GoodReader (many features) - you can use file sharing.
Connect the iPad to the Mac and launch iTunes. Select the iPad on the left side under Devices. Click on the Apps tab in the iTunes window on the right. Scroll down to the File sharing apps window. Click on the file sharing app that you are using (Adobe Reader or GoodReader in this example). Drag the document from the desktop onto the file sharing window on the right side - or click on the add button in the lower right corner - and navigate to where the file is on the Mac and select it that way.

I have an older IMAC mid 2007 intel core. I want to transfer my backup files from an older Maxtor drive to a new one. My old drive is not support by Yosemite. Can I transfer the files to a new supported drive?

I have an older IMAC mid 2007 intel core. I want to transfer my backup files from an older Maxtor One Touch drive to a new one. My old drive is not support by Yosemite. Can I transfer the files to a new supported drive? I haven't bought a new one yet. Any suggestions as to which new one to purchase?

See if you can get the drive to mount. See mount section of 1st link.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

How can i transfer my music files from iPad 2 to MacBook Pro?

hello,
I got my mp3 files from PC and transfer to iPad 2. it works good.
And I want to transfer this mp3 files from iPad to MacBook Pro.
I don't know how to do it and it seems like I should 'buy some tranfer program from other website'.
Should it word that way? or iTunes program can't deal this issue?
I have changed some music file information (such as Album, Artist, etc) of mp3 files in iPad from iTune in MacBook. Of course, the iPad was connected to the MacBook. However after I disconnected the iPad from the Mac, those changes were not shown in the iPad (edited album name, artist name...). When I connect the iPad to the Mac again, I can see the changes in iTune in the Mac.
Another issue.
Does Anybody know how to set calendar from Japanese calendar to Gregorian calendar in iPad 2? When I setup the iPad first time, I might choose wrong calendar but I can't change/see the calendar option from iPad settings...
I have been used PC for 20 years but to transfer myself to Apple, it's not easy....
Issue 1 - music file transfer from iPad 2 to MacBook Pro
Issue 2 - music file info udate in iPad 2 through MacBook and it doen's implied after disconnected.
Issue 3 - Change calendar from Japanese to Gregorian in iPad 2
Please advise,
Have a great day!!
Brandon

A free app that can deal with music files is Songbird.
There are two paid apps that can transfer just about any type of file; TouchCopy and PhoneView

Using EVOM to transfer MPEG-2 files from camcorder to mac

Similar Messages

Maybe you are looking for