Using exisiting wireless network SSID name and settings

I want to use an existing wireless network SSID and settings as i setup my new airport time capsule. I plan to turn off the wireless network at the Westell modem/router that now establsihes the network. what setting do i pick in airport utility? : extend a wirless network or steup a new wireless network?
When should i turn off the wirelss at the Westell router? Before or after running airport utility?

Establish a permanent Ethernet cable connection from one of the LAN <-> ports on the Westell router to the WAN "O" port on the Time Capsule.
Configure the Time Capsule to "create a wireless network" using the same settings for the Time Capsule network as the Westell.
Make sure that the Time Capsule has been configured to operate in Bridge Mode to work correctly with the Westell router.
Once you have the Time Capsule set up and working, you can turn off the wireless function on the Westell router.

Similar Messages

Can I do this: Use wireless network as WAN and create my own LAN.

I travel quite a bit and many hotels now do not have wired in-room networks.
So I'm looking for a way to use the wireless network as a wide area network and create a local network in-room behind a router/firewall, preferably with a private SSID..
I've been reading for quite some time and am confused about whether this is even possible.
It sounds as if I could use an airport express to join the wireless network then use the Ethernet to connect to another airport or time capsule? It sounds like joining a network on any other airport device (Time Capsule or Airport Extreme) disables all the network functions on hose devices...? I'd like to do this with a time capsule but I'm not really fond of passing my backup all over the hotel network...
Incidentally, this is about security and not dodging charges, I almost never stay in hotels that charge for Internet. Kind of hard to believe I'm the only one that wants to do this... and if it isn't obvious I don't have any airport devices presently.

Interim update:
I picked up an airport express and joined it to the hotel network. I then connected the router that I carry around to the airport express and was able to connect to the internet using my SSID on the router.
After playing with the airport utility I see that configuring any of the airport devices to replace the current router should be no issue.
I'll maybe pick up a Time Capsule next week and finish the job.

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? No firewall involved.

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? There is no firewall inbetween the two connections, as this is all on our internal network.
Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
Thanks.

If anyone ever comes across this and has the same issue, here's what I did to fix it:
My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only". (I would've used N but one of the NICs in my house is too old to support it.) Anyway, after making this change, Facetime works fine on the phone. Hope this helps someone else!

HT201250 I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

How do I set up Time Machine to a shared drive on another Mac?

Does anyone know how to get an ipad to use the wireless network from an airport?

Does anyone know how to get an Ipad to use the wireless network from an airport express?

By default, the AirPort Express will broadcast an unsecure wireless network with a Network Name of something like: Apple Network NNNNNN. Your iPad should "see" this network and be able to connect to it. Have you tried going through the iPad's Settings > Wi-Fi > Choose a Network... option. If so, does the AirPort's wireless network appear in the list of available networks?
Can other wireless devices connect to the AirPort's network?

I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

I have reset my ipad using General Reset Erase All Content and Settings. And now it will not boot. All i see on screen is the Apple logo. What do i do?

I have reset my ipad using General > Reset > Erase All Content and Settings. And now it will not boot. All i see on screen is the Apple logo. What do i do?

When you restore, you can restore to factory settings or to a backup. Restoring to factory settings removes everything and takes you back to out of the box status and you start all over again. Restoring from your backup will replace all of your app data, bookmarks, email settings and things like that. You still may need to sync all of your purchased apps and music, photos and so on back to the iPad.
I assume you want to restore from your backup to put all of you data back on the device so connect the iPad to your computer, launch iTunes, right click on the device name on the left side under the devices heading and select restore from backup. After you restore from your backup, make sure that you sync all of your other content with iTunes.

IPhone 4S has no signal bars but shows the network carriers name and the 3G icon but just doesn't have no siganl bars

Hi my iPhone 4S has no signal bars but shows the network carriers name and the 3G icon but just doesn't have no siganl bars but it was working fine till today then all of a sudden lost signal what do i do any help much appreciated

I've been experiencing with the same problem lately. Have you tried getting a new sim card?
With the new sim it seems to work well for a few days and then it goes back to the same problem. The warranty on my phone just ended about a month ago, and I've never dropped it and no water damage either. When I do a erase all and reset, it seems to work for a few days again and comes back to the same issue. I've deleted all my apps and been using the phone just as a phone and txting device. New IOS update doesn't seem to change this issue either. I've been getting by with doing a network reset and turning it off and on a few times a day.
Anyone have any solution? Much appreciated!

I am trying to set up a genius bar appointment on my computer and it tells me "Sorry your session has expired. Please sign in again using your Apple ID account name and password" I know they are correct and use them to sign in on my phone.

Hi I am trying to set a appointment for the Genus bar on my computer. I know for a fact that my login is correct. I have used it to sign in here and make a apointment (had to do it on my phone). When I get to the appointment area it tells me to resign, and tells me "SORRY" Your lass session has expired. Pleae sign in using your apple id account name and password. I have tried resetting my password and all. I am running Internet Explorer version 11 and my windows is 7. Any help would be nice...

ok.. I tried this three times and kept getting that access denied thing when I clicked post my questions. So now maybe I wont have to typ this a fifth time....
I have a MAC computer with Sync. Was set up under sync Beta. I have an Android phone synced to it that was synced using the pair this device function. It works perfectly. I just got a new Android Tablet and am trying to add it to my sync and it does not seem to have the pair my device function. It insists I log into my sync account. So I try it and it tells me invalid userid/password. I verify and it is the exact email address userid that shows as being my sync account on the MAC. I verify the password on the MAC and it tests out fine. Try the tablet again and invalid.. So I try to reset my password on the tablet and am told my email address/account name does not exist. I just verified it AND Synced my MAC using it!! I have my recovery Key but there is no place to input it into the tablet. There is no place on tablet to enter the link device codes. How can my account be valid and in use on two devices but invalid and nonexistant on the new one? And How do I get the New one to sync with other two?

Why Can't I use BT when I am using the wireless Network?????

Why Can't I use BT when I am using the wireless Network?????
I am using airport extreme.....

In an inline renderer, the compiler knows which document will be the “outerDocument” so it sets up special code to assign that value. I think you can use parentDocument or owner.document

Why does Maverick mail no longer search properly? I used to search for a name and it would find it in All mailboxes. Now it sometimes works, but mostly not. Any solutions?

Why does Maverick mail no longer search properly?
I used to search for a name and it would find it in One or All mailboxes. Now it sometimes works, but mostly not. Any solutions?

I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne

Who's using your wireless network

Is there a program or anyway to show who's using a wireless network? Like a feature that shows a list of computers that are on the wireless network?
thx

Hi!
Usually, your router comes with a log file somewhere which you can use to look up the connections made. My DLink614+ uses this list to show the MAC addresses currently connected. My syslog makes references to attempts made. However all you can see is MAC addresses...
HTH

I want to increase my wireless network coverage upstairs and to the other side of my house. I have an airport extreme down stairs, can I get another one upstairs and hard wire it in?

I want to increase my wireless network coverage upstairs and to the other side of my house. I have an airport extreme down stairs, can I get another one upstairs and hard wire it in?

Yes.
It has been covered recently. I as interested in same question matter of fact but I will have to look up details or you could search.
Bob Timmons has contributed to this question so look his up and find it as well.
See this link;
https://discussions.apple.com/message/18017606#18017606
Also this;
https://discussions.apple.com/message/18077215#18077215
Message was edited by: WilliamNewMart, to add links and correct spelling.

My welcome screen used to have just my name and an icon. Now it has my name on one side and guest user on the other. where did it come from and how do I get rid of it?

My welcome screen used to have just my name and an icon. Now it has my name on one side and guest user on the other. where did it come from and how do I get rid of it?

Either you enabled the guest user, or you enabled Find My Mac, which requires there to be an active guest account for a thief to log into, so that they'll connect to the internet and allow you to locate it.

Time machine setup - how to change 'wireless network name' and settings?

I have moved laptop to Mountain Lion.
This is the first time to backup to Timecapsule.
I went to Settings then Select Disk and selected existing Time Machine.
It took more than 30 minutes and seemed stuck on 'Preparing ....".
I cancelled and tried to 'Setup Time Capsule not listed"...
The system recognised the Time Capsule but I see that the network settings is my old 'wireless network' name.
How do I change this to the correct network name and ensure that the settings are correct?
I think if this is corrected, the backup will work.
Thanks in advance.

On the Home screen of the product control panel, touch the right arrow ( ) to view more options.
Touch Setup ( ).
Touch Network .
Touch Wi-Fi Protected Setup .
Touch PIN .
Touch Start . The product displays a PIN.
NOTE:The product begins a timer for approximately two minutes to allow you time to enter the PIN on the networking device.
Enter the PIN on the WPS-enabled router or other networking device.
I work for HP, IPGHT specialist in Officejet and Photosmart printers.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" .....

Using exisiting wireless network SSID name and settings

Similar Messages

Maybe you are looking for