Using Expression Web for editing master pages
I have SP Foundation 2013 and I am trying to edit a master page in Expression web since SP Designer no longer has design view. Reading the documentation it says that any HTML tools such as dreamweaver, Expression Web etc can be used.
I have mapped a drive to the Master Page Gallery and made a copy of the master page I am trying to edit.
When I open it up in Expression Web I get the following error:
Error creating Control - SPHtmlTag
Unknown Server Tag Sharepoint:SPHtmlTag
Can anyone help? I'm by far no web developer or Sharepoint Developer and I just want to make some simple changes to the master page such as adding a footer with some links/images etc so it displays on all pages within the site, which is just a basic intranet
site for a small company.
Any help would be appreciated, thanks.
you use HTML tools such as dreamweaver to desgin the .html file associated with the .master file:
http://blogs.technet.com/b/speschka/archive/2012/07/27/using-dreamweaver-and-design-manager-with-sharepoint-2013.aspx
GuYuming
TechNet Community Support
Similar Messages
-
Use of Expression Web for web development in MII 12.0
Hi ,
I have been developing on MII 12.0 using Frontpage 2003. I have a new Vista system and it doesnot support Frontpage. I am using Expression Web for development of web pages. I would like to know whether i can use the xMII Productivity Wizards along with Expression Web.
Thanks,
AmitIf the built-in plug-in for FrontPage doesn't work, then the standalone versions should still work.
-
Frequent crashes when editing master pages in FM 11
I've been creating new templates in FM 11.0.1.382, and am getting a lot of crashes when editing master pages. Like after every few edits, FM crashes either when I make an edit or save the file. Usually, it's the "FrameMaker 11 has stopped working" crash. Browsing the web I see that others are having this trouble too, and some have sent Adobe information about their crashes.
Just wondering if there's any way to fix this at my end. I'm on Windows 7.
Thanks,
TamiA couple things to check. First, your patches aren't up to date -- current
rev is .384 I think, so you may want to roll that latest patch on board.
And second, it's possible there's a network permissions issue. I'd suggest
copying the template files locally and making sure that you own the files
with full permissions.
FM often crashes when it encounters an unusual network or permissions
problem where it doesn't know what to do, and from the symptoms you're
reporting, I think that may be a factor -- just a WAG.
Cheers,
Art
Art Campbell
[email protected]
"... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
No disclaimers apply.
DoD 358
I support www.TheGrotonLine.com, hyperlocal news for Groton MA.
On Wed, Aug 7, 2013 at 11:41 AM, Tami Settergren -
Using Adobe Muse to create master pages
Hi,
Is it possible to use Adobe Muse to create master pages for Sharepoint 2013?
The Muse product creates the Javascript, css and html files, with the images etc.
The Muse product looks ideal to create the master pages with no coding required.
NickFor SharePoint 2013, yes you could absolutely use this tool to create your HTML (this post is in the 2010 forum, so just making sure). In SP 2013 you can use the new Design Manager to upload HTML which then gets converted to a .NET Master Page.
So long as Muse turns out valid HTML, you should not have an issue.
Brandon Atkinson
Blog: http://brandonatkinson.blogspot.com -
Using Version ES4 Livecycle added master page
Using Version ES4 Livecycle added master page and now the master page is showing on PDF view as a blank page. How to remove?
There is probably a better way to do this, but I found a work around. I set the fields on the master page to "Use Global Data" in the Binding tab. This means that the value for that field will be the same for any field with the same name. Then, on my main page, I have a hidden field with the same name that I can populate with ColdFusion and the value will also show in the master page.
If anyone has a more elegant way to do this, please respond. I am new to LiveCycle and I'm sure there are a lot of features that I am not aware of that could help me. -
How to display page no for different master pages in one adobe form application
Hi All,
we have requirement where we need to display page nos in different master pages in one single adobe form.
For the First form the page nos should be displayed pgno of total pages and for 2nd form the page no shuld be displayed as pgno of total pg.
so please help me with any script or suggestions for displaying the page no accordingly in different master pages. Your suggestions are greatly appreciated.
Thanks
Raja.Hi Lingaraj,
We have 2 different Master pages and 2 Body pages. For the seccond Master page the page no are comming correct like 1 of 3 ,2 of 3 and 3 of 3 but for First master page the page no are comming 0 of 3 in all of the page its not displaying the current page no in 1st master page.
Screen shots are attached for first master page and Hierarchy Node.Pls see the highlighted section in 2nd image.
Pls see and suggest me accordingly. Hope this helps are let me know anything u require. -
How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA
Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
ct_data-ta_guid = '000000000000000001'.
ct_data-equipment_ext = wa_itab-equipment_ext.
ct_data-descript = wa_itab-descript .
ct_data-valid_date = sy-datum.
ct_data-equicatgry = 'M'.
APPEND ct_data.
CLEAR ct_data.
ct_datax-ta_guid = '000000000000000001'.
ct_datax-equipment_ext = 'X'.
ct_datax-equipment = 'X'.
APPEND ct_datax.
CLEAR ct_datax.
it_descript-ta_guid = '000000000000000001'.
it_descript-text_language = wa_itab-text_language.
it_descript-descript = wa_itab-sdescript .
APPEND it_descript.
CLEAR it_descript.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'LTXT'.
it_longtext-text_line = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'aaaaaaaaaaaaaaa'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'bbbbbbbbbbbb'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'cccccccccccccccc'.
APPEND it_longtext.
CLEAR it_longtext.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
TABLES
ct_data = ct_data
ct_datax = ct_datax
it_descript = it_descript
it_longtext = it_longtext
return = return
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE : 'Successful'.
ENDIF.
IF NOT return IS INITIAL.
LOOP AT return.
IF return-type = 'A' OR return-type = 'E'.
WRITE : 'Error'.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH return.
ENDLOOP.
Regards
SUrendarHi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
ct_data-ta_guid = '000000000000000001'.
ct_data-equipment_ext = wa_itab-equipment_ext.
ct_data-descript = wa_itab-descript .
ct_data-valid_date = sy-datum.
ct_data-equicatgry = 'M'.
APPEND ct_data.
CLEAR ct_data.
ct_datax-ta_guid = '000000000000000001'.
ct_datax-equipment_ext = 'X'.
ct_datax-equipment = 'X'.
APPEND ct_datax.
CLEAR ct_datax.
it_descript-ta_guid = '000000000000000001'.
it_descript-text_language = wa_itab-text_language.
it_descript-descript = wa_itab-sdescript .
APPEND it_descript.
CLEAR it_descript.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'LTXT'.
it_longtext-text_line = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'aaaaaaaaaaaaaaa'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'bbbbbbbbbbbb'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'cccccccccccccccc'.
APPEND it_longtext.
CLEAR it_longtext.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
TABLES
ct_data = ct_data
ct_datax = ct_datax
it_descript = it_descript
it_longtext = it_longtext
return = return
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE : 'Successful'.
ENDIF.
IF NOT return IS INITIAL.
LOOP AT return.
IF return-type = 'A' OR return-type = 'E'.
WRITE : 'Error'.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH return.
ENDLOOP.
Regards
SUrendar -
What to do if my master page is too small for custom master page column, I need to change the papers
What to do if my master page is too small for custom master page column, I need to change the papersize from A4 to US letter size *
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages frame rates are 29.97 and i have set timeline to 25 FPS is requirement by client. kindly revert. Thanks
Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.
-
I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.
Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad -
What is the best program to use on Mac for editing, cropping photos from my computer. Looking for a free program that is good.
If your needs are limited to those tasks then both Preview and iPhoto will fit the bill They are already on your Mac. There is a free download from Google called Picasa available here:
http://picasa.google.com/
It works much the in same manner as iPhoto. For some really heavy duty work there is GIMP available from SourceForge:
http://www.gimp.org/macintosh/ Also a free download.
Message was edited by: kennethfromtoronto -
The easiest way to explain what I am attempting to achieve is to create a navigation template on the master page, with two identical arrows, one pinned to the left side, and one to the right, along with a basic 3 button navigation for; home - table of contents - end for example.
The idea behind the arrows is that if on my "Plan" tab in Muse, I have all pages within the site in consecutive order from left to right and everytime I change the image that represents the previous or next, I have to go through every page, delete the source image, add the source image to every page (50+ pages) and then link each page individually to the next page in the order.
Any help would be greatly appreciated.
JeffI produce a 300-page magazine twice a year that uses next/previous links. Unfortunately master items can't be edited on individual pages. My solution is to edit the HTML after the export. Too bad overrides don't work as they do in InDesign.
In Muse you could create the arrows on an editable page, then copy/paste-in-place on the rest of the pages and edit the links on each page. Isolate them on a separate locked layer above the regular page content so they don't get moved accidentally.
Julie -
How can I use 1 JSP for edit/create functionality?
Hi All,
Does anybody have an example of using one JSP for both editing and creating an object? I am pretty sure I can handle most of it, but am not sure about how I can specify different messages from the resource bundle (i.e. modifying the screen title for the different uses, "New Campaign" vs. "Edit Campaign").
My background is in PHP and DHTML (i.e. more front-end) and I'm just starting with Java and JSF. As such, I want to be sure that I'm using appropriate patterns for my programming.
Thank you in advance for any help,
MattI make the difference between modifying an existing object and a new one by the ID in the object. Each object has a unique ID in my app assigned by the database. So if the ID is 0, the user is creating a new object, not stored in the DB yet. I store the object to be edited/modified in the session before displaying the page:
For the title:
<h:outputText value="Edit Material" rendered="#{sessionScope.selectedMaterial.materialId != 0}"/>
<h:outputText value="New Material" rendered="#{sessionScope.selectedMaterial.materialId == 0}"/>For the action buttons:
<h:commandButton value="Update Material" action="#{MaterialControllerBean.updateMaterial}" rendered="#{sessionScope.selectedMaterial.materialId != 0}"/>
<h:commandButton value="Create Material" action="#{MaterialControllerBean.createMaterial}" rendered="#{sessionScope.selectedMaterial.materialId == 0}"/> -
What is the best practice for creating master pages and styles with translated text?
I format translated text all the time for my company. I want to create a set of master pages and styles for each language and then import those styles into future translated documents. That way, the formatting can be done quickly and easily.
What are the best practices for doing this? As a company this has been tried in the past, but without success. I'd like to know what other people are doing in this regard.
Thank you!I create a master template that is usually void of content, with the exception I define as many of the paragraph styles I believe can/will be used with examples of their use in the body of the document--a style guide for that client. When beginning a new document for that client, I import those styles from the paragraph styles panel.
Exception to this is when in a rush I begin documentation first, then begin new work. Then in the new work, I still pull in those defined paragraph and or object styles via their panels into the new work.
There are times I need new styles. If they have broader applicability than a one-off instance or publication, then I open the style template for that client and import that style(s) from the publication containing the new style(s) and create example paragraphs and usage instructions.
Take care, Mike -
How to use same form for Editing info and creating info.
Hi all,
Here my aim is to select the user from list and edit the user info. There is one more option to create the new user.
Currently I am using two separate input forms one for Editing and one more creating new user.
Can anyone tel me, how to use the same form for both editing and creating.
Thanks,
Ramesh BiradarHi Ramesh,
I'll make some assumptions about how you're going about this, and then give you a possible solution:
I assume that you have a table with selection on one page. To edit an item, you wish to select it's radio button and click an edit button to take you to another page with the item filled in to edit it. To create a new item, you'd like to click a "new" button and go to the same page.
If this is correct, here's the basic steps:
1). Assuming you have both the list and edit pages already created, make sure you have a JSF navigation case defined going from the list page to the edit page. I'll call this navigation case "goToEditPage" for this discussion.
2). To make the edit button, drag a command button from the component palette and drop it on the af:TableSelectOne (the column in your table containing the radio buttons for selection).
3). Set the action property on this command button to "goToEditPage".
4). Now, to make the create button, drag a command button from the component palette somewhere on the page. I like to put mine in a panelButtonBar inside the actions facet of an af:Page component.
5). Now, for the Action property of this command button, bind it to a method in your page's backing bean. The code will look something like this:
public String performNew()
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("Create");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty())
return null;
return "goToEditPage";
}Hope this is helpful, Ramesh.
Regards,
John
Maybe you are looking for
-
How do I transfer my iweb to another computer
I have a new MacBook Air and need to transfer my iWeb pages. I can't seem to publish them from my MacBook Pro. What can I do?
-
Forward navigation does not work in the Front-end new editor
I just upgraded my GUI to 7.20 Patch level 3 (highest available), and when I use the new Front-end editor, the forward navigation by double clicking does not seem to work. When I double click on a perform statement, the editor takes me to the sub-ro
-
Windows XP Hot fix has been installed. Intel 2200 b/g driver is updated. WRT54GX2 firmware is updated. (There is no version info on the router, so I assumed it version 1. Accordingly I downloaded firware update for version 1 from the support) Whe
-
HT204003 How do I add fandango into passbook?
OK, maybe I am just getting old, but how the heck do I add the Fandango app into Passbook? Seems redundant to me, having to add the app, then use passbook. Since Apple has done a HORRIBLE job with docs for this app, can anyone explain it to me? Tha
-
I am running Elements 11 on Windows 8. When I use the healing tool, the entire image moves with the cursor. How do I fix??? Thanks!