Using extension numbers

Does anyone have any experience with iphone when incorporating extension numbers in work phone numbers?

Do you mean to autodial it from contacts? When putting in a number for a contact, if you hit the bottom, left key (the + * # key) you change the keyboard and have the option of entering a pause (~2 seconds long) or a hard wait (in which case it will pause until you hit a key to continue). Just put the extension after the pause or wait. If using pauses to have it autodial, if one pause turns out to not be long enough, just use as many as you need.
If dialing in phone app, press and hold the "*' for a soft pause, or press and hold the "#" for a hard pause (ie. a wait).
P.S. The "wait" option might be new to iOS 5. I know it was not there in previous versions, but not sure when it showed up, in 4.3.5 or only with iOS 5? If you are running something older than iOS 5 though, you may only have the option of the ~2s pause.

Similar Messages

Lync 2010 - Using DID numbers and extensions that do not correlate

Hi everyone,
I have a situation that I believe is unique and am trying to find a good way to deal with it. I am hoping that someone out there may have a different view on how we might achieve the goal of using our existing collection of extensions and DID numbers. Here
are the implementation details...
- Around 200 locations that each have a gateway for local PSTN in and out calling
- One Enterprise Pool running Lync 2010 to service all locations
- 90%+ sites have DID numbers, however the DID numbers are not in complete blocks. There are skips in the numbers.
- Extension ranges are unique per location and have been in place for years
- DID numbers and extensions do not have any common parts... ie tel:+13275551212;ext=78943
The challenge is that we are moving the locations over into the Lync 2010 environment from a Cisco deployment and in planning out the steps, it appears that we would need to create a unique normalization rule per number that is similar to the example above.
Because the locations span different area codes that have the ability to dial 7 digit and 10 digit numbers is not consistent, we would need to have multiple dial plans. If we need different dial plans and unique normalization rules per extension
number, we would need to ensure that the all of the extension numbers normalize across the dial plans requiring that we include the unique extension normalization rules in each dial plan. (wow I sure hope you can follow this) So 200 locations with 20
norm rules each will add up quickly.
The real solution I have come up with is to migrate to Lync 2013 but this is not an option until next year. We also need to send out the correct unique CLID for the users who have a DID.
Here are the other possible solutions I have came up with each have a draw back.
- No unique CLID for outbound calls
- One Dialplan and everyone dials 10 digits externally
- Gateway adjusts a "common" base number based on extension to a unique CLID. This may not be able to be done on the existing gateways.
- An additional gateway that can adjust the outgoing CLID is put in to make changes to all CLID's based on extension.
- Create a unique normalization rule for each number set and assign that normalization rule to every other dial plan. - The long road that I think may have performance issues
due to the size of the normalization rules needed.
I really appreciate any thoughts or ideas on this one.
Cheers,
Ken Braley Voice Data Systems

Hi,
As you said, you can only use one dial plan and everyone dials 10 digits externally, however,
if your organization maintains a single dial plan across multiple locations, you may still need to create a separate dial plan for Enterprise Voice users who are migrating from a private branch exchange (PBX) and who need to have their existing
extensions retained.
If you want to keep the DID numbers like before, I think you may need to create a separate dial plan for every users.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

DUALphone 3088 extension numbers problem

Hi!
We’ve bought DUALphone 3088 some days ago. We planned to use it in our virtual dial exchange (we have a virtual phone number that can be forwarded to landline phones, mobiles and SKYPE also).
The main thing is that this device must be used as main phone in our office (in Skype mode only). So when somebody of us receives call he must be able to redirect it to another employee using extension number (like ##5 in tone mode). And we were disappointed that we can’t do that! We can’t dial extension numbers when WE RECEIVE skype call. Skype on PC allows to do that. But not this device.
Nevertheless we CAN dial extension numbers when WE MAKE skype call using this device.
So this is firmware error…
Can anybody tell how ask the producer to make an update and fix this problem?

same here in spain.
I am a wireless network operator, with a lot of skype customers.. Oddly those using PC's are unaffected, but myself and a few others using dualphones cannot connect.
As network manager I am able to prioritise skype, inspect packets etc and Nat across to any number of public IP's.
I can confirm that its not this network at fault nor any of my public IP's.

Problem using extension manager CS5 with command line

Hi All,
I had posted my question here : http://forums.adobe.com/message/4695419#4695419, but was advised to do so here as well..
I have a requirement to get the path of all the installed Extension Managers on any Windows system for the purpose of installing an extension.. I thought, there would be no problem in getting the path from the registry. There was no problem in Win XP, but the same does not work for Win 7.. I googled, and found alternate ways to get the path.
Here is the link : http://forums.adobe.com/thread/851359. I followed the instructions in this post, but failed to get this working for CS5 as mentioned in my previous thread... No problem for CS5.1 and CS6.. Why is that?
I want to get this working for CS5, CS5.1, CS6... How can I get the path of all the Extension Manager versions installed on a Windows system?
Please refer to the following screenshots to get a better understanding of my problem,
I created a jsx file named "Result.jsx", which I saved in my D drive, with the following code,
resultFile = new File("D:/result.log");
resultFile.open("w");
resultFile.write(BridgeTalk.__diagnostics__);
resultFile.close();
If I run this directly from ESTK CS5, there is no problem, and I get the result.log file. I tried to execute this script via command line as shown in the screenshot,
On executing the above, I got the following error,
What is going wrong?
Please help!

I am sorry for the poor documentation of Extension Manager which causes you so much trouble.
1. You can use BridgeTalk API to ask specific version of Extension Manager to do something. There is sample in packaging_extension.pdf about this. You don't need to know the installation path of Extension Manager. One thing to note is that the value of bt.target is version specific, i.e. "exman-5.0", "exman-5.5" send this message to different version of Extension Manager, so you can change this value to install/enable/disable/remove extensions using different version of Extension Manager. More detailed documentation of BridgeTalk can be found by clicking "Help" menu then clicking "Javascript Tools Guide CS5" in "Adobe ExtendScript Toolkit CS5".
2. Specific version of Extension Manager only manage extensions for corresponding version of product. You should use Extension Manager CS5 to install extensions for Photoshop CS5. The reason that the extension you installed for Photoshop CS5.1 using Extension Manager CS5.5 is displayed for Photoshop CS5 in Extension Manager CS5 is that two versions of Photoshop specified the same directory for Extension Manager to manage extensions. This is a defect and will cause some problems if multiple versions of Photoshop co-existed in one machine. But "to find previous (CS5) extension manager and to enable it" should work for you, I guess you use command line to enable it and specify wrong product name (see #3) so that it doesn't work.
3. When using command line, you should specify "product" attribute with the name displayed at the left panel of Extension Manager. So "Photoshop CS5 32" is correct. Remember to enclose it with double quote because of existence of space character.
4. As above mentioned, use display name of Photoshop, and call proper version of Extension Manager by BridgeTalk.

I have a personal itunes account with an iPhone5s and an iPad 4 mini. I have unlokced my old iPhone 4 to use for work on a diffeent SIM and new number, can i have all devices associated to me single appleID and use both numbers ?

I have a personal itunes account with an iPhone5s (perosnal mobile numer) and an iPad 4 mini (no SIMM). I have unlocked my old iPhone 4 to use for work on a different SIM and new number,
Do you know if I can have all devices associated to my single apple ID and still use both numbers without messing up my profile. It has just changed my number over.

I would not be able to give you idiot proof guide, since different games are different. Some of them have icloud integrated already, but those already taken care of. Some of them use specific logins and once you log - you get your info. General recommendation is to contact support sites of those games for enabling icloud instructions or enabling of transfer. There are other purely apple ways - like sync your phone in itunes and then sync apps with ipad, but those are only one time transfer. There is another way that is not typically recommended - restoring ipad from iphone backup. It may transfer your game content, but once again sync in the future has to be done by game.
So if I were you, I would address that individually with every game provider.

How to use different numbers ranges in LSMW for a material in 8plants

Hi all,
I have to upload data using MM01 in LSMW by using external numbers.
the MATNR for materials are like this 17240,22818,82618,487218,7218,26418
how can i take these numbers in LSMW.i have 61 material numbers to be extended to 8plants.can i upload these material numbers at a time in LSMW
the above material number should be extended to 8plants.but the field values for some fields are varying.the material number should be same for 8plants
For this issue, which method i should follow in LSMW.

Just do one thing,
while recording enter the material numer field by yourself(Not blank).This material is the material which you mention out of 61,
and upload the same in your upload file, and just change plant.i mean 8 records are there for each material( all 61)
reward if useful.
Amit Singla

I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me!

I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me! I have a macbook pro and iphone 5

lewbobber wrote:
Basically i need to either take it to a shop that can unlock i.e. £40.00
Be aware, you go that route & every time you try to update or restore, it will error out, leaving your phone unusable. Not to mention, you void all warranty/support.
Sell it & use the proceeds towards an officially unlocked iPhone bought directly from Apple.
Good luck.

I need help with this program ( Calculating Pi using random numbers)

hi
please understand that I am not trying to ask anymore to do this hw for me. I am new to java and working on the assignment. below is the specification of this program:
Calculate PI using Random Numbers
In geometry the ratio of the circumference of a circle to its diameter is known as �. The value of � can be estimated from an infinite series of the form:
� / 4 = 1 - (1/3) + (1/5) - (1/7) + (1/9) - (1/11) + ...
There is another novel approach to calculate �. Imagine that you have a dart board that is 2 units square. It inscribes a circle of unit radius. The center of the circle coincides with the center of the square. Now imagine that you throw darts at that dart board randomly. Then the ratio of the number of darts that fall within the circle to the total number of darts thrown is the same as the ratio of the area of the circle to the area of the square dart board. The area of a circle with unit radius is just � square unit. The area of the dart board is 4 square units. The ratio of the area of the circle to the area of the square is � / 4.
To simuluate the throwing of darts we will use a random number generator. The Math class has a random() method that can be used. This method returns random numbers between 0.0 (inclusive) to 1.0 (exclusive). There is an even better random number generator that is provided the Random class. We will first create a Random object called randomGen. This random number generator needs a seed to get started. We will read the time from the System clock and use that as our seed.
Random randomGen = new Random ( System.currentTimeMillis() );
Imagine that the square dart board has a coordinate system attached to it. The upper right corner has coordinates ( 1.0, 1.0) and the lower left corner has coordinates ( -1.0, -1.0 ). It has sides that are 2 units long and its center (as well as the center of the inscribed circle) is at the origin.
A random point inside the dart board can be specified by its x and y coordinates. These values are generated using the random number generator. There is a method nextDouble() that will return a double between 0.0 (inclusive) and 1.0 (exclusive). But we need random numbers between -1.0 and +1.0. The way we achieve that is:
double xPos = (randomGen.nextDouble()) * 2 - 1.0;
double yPos = (randomGen.nextDouble()) * 2 - 1.0;
To determine if a point is inside the circle its distance from the center of the circle must be less than the radius of the circle. The distance of a point with coordinates ( xPos, yPos ) from the center is Math.sqrt ( xPos * xPos + yPos * yPos ). The radius of the circle is 1 unit.
The class that you will be writing will be called CalculatePI. It will have the following structure:
import java.util.*;
public class CalculatePI
public static boolean isInside ( double xPos, double yPos )
public static double computePI ( int numThrows )
public static void main ( String[] args )
In your method main() you want to experiment and see if the accuracy of PI increases with the number of throws on the dartboard. You will compare your result with the value given by Math.PI. The quantity Difference in the output is your calculated value of PI minus Math.PI. Use the following number of throws to run your experiment - 100, 1000, 10,000, and 100,000. You will call the method computePI() with these numbers as input parameters. Your output will be of the following form:
Computation of PI using Random Numbers
Number of throws = 100, Computed PI = ..., Difference = ...
Number of throws = 1000, Computed PI = ..., Difference = ...
Number of throws = 10000, Computed PI = ..., Difference = ...
Number of throws = 100000, Computed PI = ..., Difference = ...
* Difference = Computed PI - Math.PI
In the method computePI() you will simulate the throw of a dart by generating random numbers for the x and y coordinates. You will call the method isInside() to determine if the point is inside the circle or not. This you will do as many times as specified by the number of throws. You will keep a count of the number of times a dart landed inside the circle. That figure divided by the total number of throws is the ratio � / 4. The method computePI() will return the computed value of PI.
and below is what i have so far:
import java.util.*;
public class CalculatePI
public static boolean isInside ( double xPos, double yPos )
     double distance = Math.sqrt( xPos * xPos + yPos * yPos );
public static double computePI ( int numThrows )
    Random randomGen = new Random ( System.currentTimeMillis() );
    double xPos = (randomGen.nextDouble()) * 2 - 1.0;
    double yPos = (randomGen.nextDouble()) * 2 - 1.0;
    int hits = 0;
    int darts = 0;
    int i = 0;
    int areaSquare = 4 ;
    while (i <= numThrows)
        if (distance< 1)
            hits = hits + 1;
        if (distance <= areaSquare)
            darts = darts + 1;
        double PI = 4 * ( hits / darts );
        i = i+1;
public static void main ( String[] args )
    Scanner sc = new Scanner (System.in);
    System.out.print ("Enter number of throws:");
    int numThrows = sc.nextInt();
    double Difference = PI - Math.PI;
    System.out.println ("Number of throws = " + numThrows + ", Computed PI = " + PI + ", Difference = " + difference );
}when I tried to compile it says "cannot find variable 'distance' " in the while loop. but i thought i already declare that variable in the above method. Please give me some ideas to solve this problem and please check my program to see if there is any other mistakes.
Thanks a lot.

You've declared a local variable, distance, in the method isInside(). The scope of this variable is limited to the method in which it is declared. There is no declaration for distance in computePI() and that is why the compiler gives you an error.
I won't check your entire program but I did notice that isInside() is declared to be a boolean method but doesn't return anything, let alone a boolean value. In fact, it doesn't even compute a boolean value.

HT1343 if one is using windows 8.1 on a boot camped mac and you are using a mac keyboard . How does one unlock the numbers on the larger wired keyboard ( numbers keys to the right of the keyboard) instead of having to use the numbers at the top of the ke

Question: I am using a mac , wired Keyboard, on a windows 8.1 platform ( this is because I have boot camped my hard drive) Unfortunately when I change over from my mac set up into the windows 8.1 the key board does not behave like it does when I am using as a mac. The numbers , on the right of the keyboard , no longer function and I have to use the numbers at the top of the keyboard, very annoying. Can anybody let me know how I unlock the numbers on the right of my keyboard?
Regards CM

I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

Create Inbound Delivery with Reference to PO using Serial Numbers

I guys.
I didn't find any BAPI to create an Inbound Delivery with Reference to PO using Serial Numbers so I've made a Function Module with BDCData.
LOOP AT serial.
    ADD 1 TO ld_count.
    ld_value = serial-sernr.
    CONCATENATE 'RIPW0-SERNR(' ld_count ')' INTO ld_field.
    PERFORM bdc_field USING ld_field ld_value.
ENDLOOP.
This works fine for 10 entries, but when I'm trying to use 1000 entries in serial Internal Table I'm getting the error: Screen 0000 is too large for internal batch input area - Message no. 00379.
Please note that my issue is the Serial numbers, so don't answer me please with BAPIs that doesnt allow me to deal with this.
Any idea?
Thanks in advance,
Nuno

As I expect, it solved my problem. It's not pretty, but it works...
PERFORM bdc_dynpro      USING 'SAPLIPW1'       '0200'.
PERFORM bdc_field       USING 'BDC_CURSOR'     'RIPW0-SERNR(01)'.
DATA: ld_valor(4) TYPE n,
        ld_next,
        ld_tabix TYPE sy-tabix.
LOOP AT serial.
    ld_tabix = sy-tabix.
    IF ld_next = 'X'.
      CLEAR ld_next.
      ld_count = 2.
    ELSE.
      ADD 1 TO ld_count.
    ENDIF.
    ld_value = serial-sernr.
    CONCATENATE 'RIPW0-SERNR(' ld_count ')' INTO ld_field.
    PERFORM bdc_field USING ld_field ld_value.
    ld_valor = ld_tabix + 17.
    ld_valor = ld_valor MOD 18.
    IF ld_tabix NE 1 AND ( ld_tabix EQ 19 OR ld_valor EQ 0 ).
      ld_next = 'X'.
      PERFORM bdc_field       USING 'BDC_OKCODE'     '=PNPG'.
      PERFORM bdc_dynpro      USING 'SAPLIPW1'       '0200'.
      PERFORM bdc_field       USING 'BDC_CURSOR'     'RIPW0-SERNR(01)'.
    ENDIF.
ENDLOOP.
PERFORM bdc_field       USING 'BDC_OKCODE'     '=RWS'.

What are the Pros and Cons of Using Batch Numbers over Serialization

Dear SAP Gurus:
Will someone please give me the benefits of using Batch Management over serial numbers in this case scenerio, or vice versa:
Client wants to trace all the components of an assembly in a BOM. Even the Raw material. The client sends the material out today and has the vendor assign serial numbers to the individual pieces, the client gives the range of serial numbers to use. We are looking at using batch numbers to accomplish this and issue one material and batch number to a production order. Then use MB56 batch where used functionality to view history. I am wanting to understand the benefits of this. Please advise and points will be awarded as always.
Also, in this scenerio, can you issue multiple material/batch numbers to one vendor op that has its own production order?

Yes it is a subcontract.
Example: This is the solution but need the pros and cons of doing this scenerio
Sheet of metal sent to vendor to make lets say 1800 peices of material number nas5703-01. All 1800 pieces come back and issued to a production work order using one bacth number for one material item so that batch number can be traced in history in MB56 and a fit up report.

Suddenly, all my saved Excel Worksheets are opening as Numbers documents, even though I've NEVER used the Numbers application, and even though the documents continue to be identified as Excel documents--losing years of work. What happened?

How can I uninstall Numbers? I've never used the Numbers application before, and suddenly all my saved Excel Worksheets are opening as Numbers documents, even though they continue to be identified as Excel documents? I'm losing years of work.

Right click on a Excel Worksheet file, choose 'Get Info'. In the small window that opens change the 'Open with:' from Numbers to Excel. Click on 'Change All…'

Problem Creating an ABAP Proxy based on a WSDL which uses extensions.

Hi all,
I'm trying to create an Asset in Salesforce using ABAP.
I can generate the ABAP Proxy OK, (from the SalesForce Enterprise WSDL I created) but the Asset definition does not exist.
I think my issue stems from the fact that the SalesForce WSDL uses extension elements for the definition of Asset.
I found the following notes on the extension element
516072 - XI Proxy Generation (not really for abap)
1386239 - Extention of complex type containing xsd:any (this is close but we are on SAP BASIS Release 70 701 not 702
Threads which talks about extension element not supported.
Proxy generation terminated: WSDL error ( EXTENSION not supported)
WSDL Error: Element 'extension' not
Threads which talks about how to modify the WSDL
Creating ABAP proxy from WSDL fails when <extension> present
Creating ABAP proxy from WSDL fails when <extension> present (but this is using xmlspy which I don't have and the instructions aren't clear to me)
What I'm really looking for is
1) Any Notes which I could apply in a basis 701 environment to enable creating abap proxies from wsdl with extension elements
2) Any tips on how to modify my WSDL to remove the extension elements yet still offer the same functionality (i.e. I need to use the create function with a sobject of Asset (which is currently defined via an extension.
3) Anyone who has integrated with SalesForce to create SalesForce objects (Accounts, Assets, etc) either tips on how to modify the WSDL or sample ABAP code as to how you got around the missing extension elements.
Regards,
John

Hi John,
couldn´t you post a section from your wsdl file which includes the type definition with an extension?
I think you could remove the extension an copy all elements from the type definition which is extended into the new type definition.
Here an example that you get the idea:
<xsd:complexType name="PERSON">
        <xsd:sequence>
           <xsd:element name="firstName" type="xsd:string"></xsd:element>
           <xsd:element name="lastName" type="xsd:string"></xsd:element>
           <xsd:element name="ageInYears" type="xsd:int"></xsd:element>
           <xsd:element name="weightInLbs" type="xsd:float"></xsd:element>
           <xsd:element name="heightInInches" type="xsd:float"></xsd:element>
        </xsd:sequence>
     </xsd:complexType>
     <xsd:complexType name="femalePerson">
        <xsd:complexContent>
           <xsd:extension base="typens:PERSON" >
           <xsd:element name="favoriteLipstick" type="xsd:string"></xsd:element>
           </xsd:extension>
        </xsd:complexContent>
     </xsd:complexType>
is going to be ->
<xsd:complexType name="PERSON">
        <xsd:sequence>
           <xsd:element name="firstName" type="xsd:string"></xsd:element>
           <xsd:element name="lastName" type="xsd:string"></xsd:element>
           <xsd:element name="ageInYears" type="xsd:int"></xsd:element>
           <xsd:element name="weightInLbs" type="xsd:float"></xsd:element>
           <xsd:element name="heightInInches" type="xsd:float"></xsd:element>
        </xsd:sequence>
     </xsd:complexType>
     <xsd:complexType name="femalePerson">
           <xsd:element name="firstName" type="xsd:string"></xsd:element>
           <xsd:element name="lastName" type="xsd:string"></xsd:element>
           <xsd:element name="ageInYears" type="xsd:int"></xsd:element>
           <xsd:element name="weightInLbs" type="xsd:float"></xsd:element>
           <xsd:element name="heightInInches" type="xsd:float"></xsd:element>
           <xsd:element name="favoriteLipstick" type="xsd:string"></xsd:element>
     </xsd:complexType>
Save your changes to a local file and use this to generate your proxy.
Bye Richard

How to use Extension parameter in BAPI

Hi,
Can anyone provide any clue about how to use the EXTENSION paramenters in BAPI? Thanks.
Regards,
Chris

Hi,
just check this thread you can get some idea how to use extension in BAPI.
BAPI_ACC_DOCUMENT_POST (EXTENSION)
Regards
Vijay

Using extensions without having write permission to ext directory

I'm trying to deploy a servlet and I need to use a Java extension so that I can get a dll required by one of my libraries into the Java path (the dll is packed in a jar). The problem, however, is that the user of the client machine is not guaranteed to have write permission to <jre>/lib/ext. Is there a way that I can specify an alternate directory for the jar to be placed in that the client user's permission will allow (e.g. Temporary Internet Files, Temp Directory, in the home directory, etc.)? Alternatively, is way to get the dll uploaded to the client machine without using extensions? Requiring the client user to manually install the file is not an option.
Thank you.

I solved this Problem myself!
It is possible to give permission on status transition. That was what i was searching for!
Thanks!

Using extension numbers

Similar Messages

Maybe you are looking for