Using external microphones with zen ne

How do I plug in an external microphone into my zen neeon? I plan to use bi-naural microphones. Can I use a preamp and an adapter? Is this even possible with my model?
Thanks
Nora

I'm sorry, but that's not really my area of expertise. If you are planning to use this for simple voice-recording you could try the Griffin iMic device which helps provide both pre-amplification and impedance matching between a mini-plug mic and a USB port for sound input. I've used it recording music from a boom-box to a MacBook.
The tech specs state that the audio line-level in port is:
Input impedance greater than 20,000 ohms
Input level: Max 2 V rms (+8.2 dbµ)
I would look for a mic that meets those specifications. MacSpeech.com has several microphone/headset recommendations for use with their Dictate and iListen voice recognition software. I would think that their suggestions would be useful.

Similar Messages

  • How to use external microphone in combo jack?

    Hello,
    My notebook Pavillion 14-V042tx have this combo jack (input/output in one jack).
    How can i use my external microphone with this combo jack?
    When i inserting the microphone it won't recognize the device, but when the headphone / external speakers are inserted, it's doing fine.
    Do i need cable audio splitter like this?
    Or are there any settings to enable the external microphone?
    Thx before.

    exlinko,
    If the hardware is working the 8.1 software should detect that the jack was inserted and allow you to listen to (audio -out) on one of the jacks and allow you to input (audio-in) on the other. Also the software should mute the internal mic and speakers. Good luck with M$ 8.1 software.
    Ham123

  • Anyone successful using external microphone?

    Anyone successful using external microphone?
    Tried using 1/8” external microphone input with RadioShack PZM microphones. The mic works in GarageBand, iMovie and VO tool work, but iChat will not use the microphone. Audio is visible in system preferences???
    Thank you,
    Shawn Bockoven

    1.     Opened package
    2.     Placed battery in microphone RadioShack 33-3022 Boundary
    3.     Plugged in mic using 1/8’ mini jack on iMac 2.0 10.4.2
    4.     Opened System Preferences and changed input to audio line-in port
    5.     Launched iChat 3.0
    6.     Opened video preview/preference and changed audio input to line in
    7.     Became very frustrated
    8.     Tested in GarageBand mic worked
    9.     Tested in iMovie mic worked
    10.     Tested using VO tool mic worked
    11.     Launched iChat again checked all setting mic does not work
    http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&product%5Fid=33-3022

  • Using external libraries with Developer Studio 7.1 Composition Environment

    Hi,
    I downloaded DS 7.1 CE and tried to develop a simple application which uses an external library.
    I created a development component for "external library" for the local development -> MyComponent, giving it the name "test2" (for the domain basis).
    I imported the external library file using Import -> File System , then selecting the .jar file.
    In the component properties browser I added a public part naming it "mylib2" setting the purpose to "ASSEMBLY" (my intention was that the libarry will be transferred during the deployment to the application server).
    I right clicked on the public part to "managed entities". I selected the archive tree and checked the library file shown there (the one I imported before). #
    Then I opended component properties of my web dynpro project and clicked on "Dependencies". The I chose "Add..." and selected the "test2" development component I created before (see above).
    Then I tried to deploy the project (which uses this external library) using "Deploy Archive and Run"
    After deployment the browser window opens and shows the ClassNotFoundException
    So what did I oversee or do wrong?
    BTW: Is it necessary for using external libraries to use a full fletched NWDI? Or can I use external libs also with netweaver development environments freely available for download on sdn.sap.com?
    Any hints?
    Thanks a lot
    Hannes

    Hannes,
    If you want to use external libraries with DCs then you should follow the NWDI completely.
    Check this step, otheways of using external libraries is mentioned <a href="http://help.sap.com/saphelp_nw70/helpdata/en/e3/de813e77d46245e10000000a114084/frameset.htm">here.</a>
    Regards
    Abhilash

  • Can we use external drive with ipad air

    can we use external drive with ipad air?

    There are some wifi-enabled drives that allow you to stream content (music, films, tv programmes) to an iPad, but you can't directly connect one to an iPad.

  • Can I use external speakers with the iPad when using Facetime?

    Can I use external speakers with the iPad when using Facetime?  How do I do that?

    They have to be either plugged in via headphone jack or the dock port at the bottom. If you can. I've used it on apple tv, but that's it. I don't know if the others work, but I don't see why not. Try plugging in speakers in the headphone jack. You will get an answer :)

  • Using an external microphone with a Mac Pro Tower

    I have a Mac Pro tower with OS 10.4.11 and I have a question regarding recording sound through an external microphone.
    I own a microphone with a 1/4" jack and when I plug it into the designated input on the back of my tower, I'm not getting any sound. I've troubleshooted with a couple different microphones and none seem to work. Am I doing something wrong? Is there some sort of configuration that I have to do when using a mic?
    Please help!

    I'm sorry, but that's not really my area of expertise. If you are planning to use this for simple voice-recording you could try the Griffin iMic device which helps provide both pre-amplification and impedance matching between a mini-plug mic and a USB port for sound input. I've used it recording music from a boom-box to a MacBook.
    The tech specs state that the audio line-level in port is:
    Input impedance greater than 20,000 ohms
    Input level: Max 2 V rms (+8.2 dbµ)
    I would look for a mic that meets those specifications. MacSpeech.com has several microphone/headset recommendations for use with their Dictate and iListen voice recognition software. I would think that their suggestions would be useful.

  • Using an external microphone with Premiere pro

    Hey Guys, I'm new to this forum and I really don't know if you guys could help me with this. But I have bought a Samson C01U microphone a few days ago and I really want to use Adobe Premiere pro to record some guitar covers of myself. The problem is however; I record my video's with my sony handycam and I want to use my new mic to record the sound but when I press F5 (to capture a movie in Premiere pro) it still uses the microphone from my camera. What should I do?
    I have already tried this: http://premierepro.wikia.com/wiki/Microphone
    Thanks everyone
    Stijn Jasper
    ~The Netherlands

    This is how I do it at the moment: I start premiere pro and Audience. Then I turn off my speakers to make sure it doesn't get feedback from it. Then I hit record on both programs and sync up the video and audio lines after my movie is done (then I also disable the audio that my Handycam has recorded)
    But that's a lot of work if you want to shoot many video's. There must be a better way right?
    This is how I got my microphone enabled in Pr: http://kb2.adobe.com/cps/408/kb408222.html
    It works, but only if I want to record AFTER I have recorded the movie (like a voice-over)
    Any more ideas? (thanks for all the great reply's btw) you guys are really helpful

  • How to use external microphone? L420

    Hi, 
     I had a R61 before and it was easy to use an external mic in that as there were two ports,one for headphones and the other for mic. In the L420 however, it seems that there is only one port with a headset engraved on it. I suppose that means it's a combi port, both for headphones and mic. So i connected the mic,but all I could hear in my recording was whatever the "INBUILT LAPTOP" microphone could record,which was mainly noise. My connected microphone could not be recorded. Any help?
    Thanks.

    Hi arx
    I also used to fight with L420 mic, but the external mic plugin never gave me a problem.
    First I tried a normal mic (3.5 mm / mini stereo) (http://en.wikipedia.org/wiki/File:Audio-TRS-Mini-Plug.jpg) and did not work.
    If I use my earphones with mic that has a 4 section plug the mic works without problem.
    Maybe you need this kind of adapter.
    http://forums.lenovo.com/t5/ThinkPad-Edge-Knowledge-Base/Microphone-Headset-Jack-splitter-needed-for...
    I hope this helps you.
    Regards
    Martín Itúrbide
    OS2World.com NewsMaster
    - Lenovo. Please unlock the Thinkpad Tablet bootloader
    - Thinkpad Tablet 1838-22U
    - Thinkpad L420 - 7853-3WS
    - Thinkpad R51 - 1830-PS0
    - ScrollPoint Pro Mouse

  • Possible to use external HD with 2 machines?

    Aloha all, I have been using an external HD with my MacBook to store librarys for iPhoto, & Aperture. It has worked great, but today I hit a snag. I cannot get the drive to show up when I plug it into my G5. I would like to be able to use it with both.

    Do you have a LAN that you can connect the two Macs to? If so then log into the MacBook from the G5 and select the external HD. That will let you access any of the libraries on the external HD. Just be sure to set the ownership of the external HD to be ignored as seen here.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Using external Jar with a mobile application

    Hi folks!
       I need some help with my application, i make a simple mobile application and i need to use a external jar, in this case, this jar have a simple JAVA class that represents a manipulation with eSWT, so my problem is How to using external Jar in NetWeaver 7.1?
       I see other threads that have a same doubts, but i don´t have a solution for my problem.
       Thats it.

    Hi Sivakumar,
    I have similar problem. i want use iText or similar jar files to create pdf. I have currently developed a UI component for handheld. I have dont the following things:
    1)Created a external dc of type external library
    2) addedd the jar in the build path
    3) added the jar in the lib folder of the webdynpro project
    4) added the external jar dc as dependency in my webdynpro project
    I am getting no class def found eror still for some wierd reason. please let me know if some step is missing. I have pasted the trace.
    rror starting the framework
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sap.tc.mobile.cfs.startup.pda.Startup.main(Unknown Source)
    Caused by: java.lang.NoClassDefFoundError: com/cete/dynamicpdf/Font
         at com.sap.demo.testui.testapp.comp.SignatureStandard.runApps(SignatureStandard.java:88)
         at com.sap.demo.testui.testapp.comp.TestCompView.wdDoInit(TestCompView.java:85)
         at com.sap.tc.mobile.wdlite.progmodel.core.Controller.enter(Controller.java:21)
         at com.sap.tc.mobile.wdlite.progmodel.core.View.enter(View.java:45)
         at com.sap.tc.mobile.wdlite.progmodel.core.Application.setCurrentView(Application.java:133)
         at com.sap.tc.mobile.wdlite.progmodel.core.Application.navigate(Application.java:169)
         at com.sap.tc.mobile.wdlite.progmodel.core.Application.enter(Application.java:19)
         at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.setCurrentApplication(WDLite.java:148)
         at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.launchApplication(WDLite.java:80)
         at com.sap.tc.mobile.wdlite.container.ContainerApp.startApp(ContainerApp.java:171)
         at com.sap.tc.mobile.wdlite.container.AppMenuView.onActionLaunchApp(AppMenuView.java:325)
         at com.sap.tc.mobile.wdlite.container.AppMenuView.invokeEventHandler(AppMenuView.java:368)
         at com.sap.tc.mobile.wdlite.progmodel.core.AbstractViewElement.doHandleEvent(AbstractViewElement.java:199)
         at com.sap.tc.mobile.wdlite.renderer.api.UIElement.doHandleEvent(UIElement.java:369)
         at com.sap.tc.mobile.wdlite.renderer.api.UIImageButton.mouseReleased(UIImageButton.java:148)
         at com.sap.tc.mobile.wdlite.renderer.api.UIElement.dispatchMouseReleasedWidgetEvent(UIElement.java:412)
         at com.sap.tc.mobile.wdlite.renderer.api.UIElement$1.mouseReleased(UIElement.java:455)
         at com.sap.tc.mobile.wdlite.renderer.swt.MouseEventDispatcher.mouseUp(SWTControl.java:380)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:137)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928)

  • How can I use external tables with directories not on Oracle host?

    Oracle 11.2.0.2
    We have developers using C# to populate global temporary tables (two one header and detail with 1 to many relationbship between these two tables). The process of using C# was blowing up memory on Windows.
    As an alternative I requested them to create two CSV files and I can use sqlldr to load the detail CSV file of over 1 million rows under 15 seconds. It came to my mind that I could use external tables for this purpose with getting read of header and trailer from the CSV files.
    The issue I have is that I am not a DBA so I do not have access to OS host that Oracle instance is running. sqlldr is a client side tool, whereas external tables are server side. I was wondering if there is an alternative in 11g to use external tables without creating directories on the OS host that Oracle runs on? Are there other alternatives?
    Thanks

    905989 wrote:
    Oracle 11.2.0.2
    We have developers using C# to populate global temporary tables (two one header and detail with 1 to many relationbship between these two tables). The process of using C# was blowing up memory on Windows.
    As an alternative I requested them to create two CSV files and I can use sqlldr to load the detail CSV file of over 1 million rows under 15 seconds. It came to my mind that I could use external tables for this purpose with getting read of header and trailer from the CSV files.
    The issue I have is that I am not a DBA so I do not have access to OS host that Oracle instance is running. sqlldr is a client side tool, whereas external tables are server side. I was wondering if there is an alternative in 11g to use external tables without creating directories on the OS host that Oracle runs on? Are there other alternatives?
    Thanks
    no other alternative

  • Using External iSight with MacBook Pro / iMac.

    Posted in both forums.
    Internal iSight is great, but the external iSight offers so much more flexability, and been able to position the camera where you want it is much better than tilting the screen and moving the computer.
    So can you use external camera's with the MacBook Pro's and iMac's?
    *nathan

    Great! Thats awesome.
    Have you tried it? If so, does the Mac automaticlly switch to the external iSight, or do you get an option to choose between internal and external.
    Thanks,
    *nathan

  • Using External Effects with Logic

    I'm about to purchase Logic 9, and also need an Audio Interface. 
    I've got a Korg MicroKorg, which I intend to line-in for its own synth functionality.  I also intend to use it as a midi control surface to use percussion, etc., in Logic.  How would this work with external effects?
    If I create a drum track in Logic, I'd like to do things like run that track through pedals like an EHX Flanger Hoax (I realize sound quality may vary, given that this is a guitar effect). 
    How what I do that, and what would I need to look for in an Audio Interface to allow me to get the audio out of Logic, through the pedal, and back into Logic?
    Thx.

    I think I understand you - you have a choice of Firewire or USB connected devices - Firewire devices are faster and generally more reliable and can handle a larger bandwidth, so if you're planning on recording numerous inputs, for example, this will matter. However, USB devices are pretty good on the whole - I'm using a simple Apogee One at the moment, which is perfectly adequate for my purposes, but my earlier point was that it obviously wouldn't be any good for using external effects since you're going to need to send a signal out from Logic (maybe via a Bus/Auxiliary) to your effects device and then return it back into Logic, so you need an interface with enough inputs and outputs to be able to do that. You might want to have other outboard gear permanently connected for convenience, so only you can work out how many inputs and outputs you'll need and obviously, the bigger the requirement, the more expensive it will be. You'll have to do some Googling to give you an idea - Apogee, Focusrite and MOTU are good starting points, in my opinion but there's a vast range (I'd avoid MAudio)
    http://www.google.co.uk/#hl=en&gs_nf=1&cp=22&gs_id=2g&xhr=t&q=audio+interfaces+f or+mac&pf=p&sclient=psy-ab&oq=audio+intefaces+for+ma&gs_l=&pbx=1&bav=on.2,or.r_g c.r_pw.r_qf.,cf.osb&fp=426f61de939593dc&biw=1231&bih=579
    Another point I was trying to make earlier is that Logic includes such a large range of effects to choose from (the Pedalboard is an emulation of various fx pedals which you can swop around) that you may find you can get the kind of sounds you want 'in the box' - so that's well worth a try first.

  • Using external drives with OS X Server

    Is it possible to use external firewire hard drives the same way that I would use an internal. I am asking this because we have 3 of them with 250Gb each. I would use them to increase the storage of a server, which would lower the cost of one and make it much more possible to buy. The drives wouldn't be removed and I would like to be able to apply security settings to control access to them. They can be easily formatted with the approperiate OS X file system.

    It wasn't that I thought I couldn't use them I just need to know if I can put a user's home directory on there and have users save to them across the network. Can I in fact do this. A couple of people I have talked to about doing this had mixed thought so I figured I'd throw to you guys.

Maybe you are looking for