Using extreme as a wireless for comp to tv

hi all
I have an apple extreme that i dont need to use anymore as my new modem has wireless and is working fine.
Can i set up the extreme next to the tv (linked w HDMI or USB) to send signal from my laptop so i can watch stuff through it ie ABC iview. (australia)
Does it need to be connected via ethernet cable?
If so, what are the limitations as the extreme then becomes the wireless router (if that is correct) and must be in bridge mode.
Thanks

Well, you COULD use your extreme as an (expensive) ethernet switch. But, if you already have WiFi, and your AppleTV is connected to it...I'm not sure there really is a need for what you are wanting to do?

Similar Messages

  • Using Extreme as a wireless card

    I have a G4 Dual 800 with no Airport card. I also have a UFO Airport Extreme Basestation.
    Can I connect the basestation to the G4 and use it as a wireless card to connect to my network?
    Does that make sense?

    You cannot use the AirPort Extreme Base Station (AEBS) directly as a replacement wireless adapter, but (if your wireless network is created by another AirPort) you can create a Wireless Distribution System (WDS) between them. This would allow the AEBS to wirelessly extend the wireless network of the other AirPort AND enable its LAN port to allow the G4 to access the network/Internet.

  • Trouble with internet connection when using extreme to join wireless network

    I have an airport extreme that I want to use as an ethernet hub.  I have successfully connected it to my wireless modem, and I have a solid green light; however, when I connected the ethernet to my tv/computer/anything there is no internet connection.  I tried powering down everything in order and rebooting as appropriate modem then router then computer, but still not internet connection.  Any suggestions.

    The AirPort Extreme does not provide any routing functions when it is configured to "join a wireless network", so the Ethernet ports are not active in this type of setup. The only thing that really functions is the USB port, which could be used for a remote printer or hard drive.
    If you have another Apple "n" wireless router acting as your main base station, you can configure the AirPort Extreme to "extend a wireless network". The Ethernet ports are enabled in this type of setup....and the Extreme will provide more wireless coverage in the area where it is located.

  • Can you use hdtv as display wireless for macbook air?

    Can you connect macbook air to a hdtv using wireless through a network?

    I see that you didnt get any replys. I just posted the same question before I saw your post. Did you ever get it worked out? if so, what did you end up doing?
    Thanks

  • How can I tell if my computer is using ethernet or wireless for downloads?

    Hi,
    My computer is hooked up via ethernet to my router (base station) which is connected to my DSL modem, and I also have my Airport on because I have extended my network with an airport express so I can stream music to my stereo across the room using iTunes.
    I've noticed in the Airport menu that my computer is connected also to my wireless network which I use for getting online with my iPad.
    Can I assume that my computer will use ethernet and NOT wireless for accessing the internet, downloading files, etc?
    How can I tell which network connection is being used? Are there tools for monitoring the network that would allow me to easily determine if a particular download is going over the ethernet or the wireless connection?
    Clearly, I want to use the hard line ethernet connection for everything and use the wifi only for my streaming music function for speed purposes...
    Thanks!!!!
    Elisabeth

    Hi,
    Internet is served on the priority basic from the System Prefrences Network pane.
    If ethernet is on top you getting it from ethernet if Airport and so on...
    So depending on internet speeds set the priority to access fast internet speeds.

  • Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

    Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
    I would like to strem movies from the hard drive to iphone.
    I have already seen the Goflex Stellite, which works this way.
    Is there any other device that could do this?

    I did a typo. My current computer is a 2010 1/2 iMac.  The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs  would be possiblities.
    Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

  • Using AX as a wireless reciever for desktop

    Hello Apple World,
    I have an Airport Extreme (Purchased within last 3 mo.) and I was wondering if i can use it as a wireless receiver for my desktop that has no wireless card. My cable modem has wireless on it and my desktop is in another room. I would like to take my AX and connect to my cable modem wireless and then connect my desktop via Ethernet. Is this possible and how does one set that up. Do you have it extend the wireless then just plug in the ethernet? if that how it works then I would feel kinda dumb. Thanks for the help!

    Well I figured it out.
    Do a factory reset; unplug AX (Airport Extreme) Press reset and plug in while holding reset
    Plug in AX via ethernet to mac computer
    Open Airport Utility and click Manual Setup
    Select "Join Wireless Network" and underneath check Allow Ethernet clients
    Input wireless network info
    AX resets and will blink yellow for a moment while it gets IP Address then goes green
    Thing is up and running i now have wireless printing and internet for my desktop yay!

  • Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

    Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

    The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
    The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
    So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor.  That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster.  A better term than "extender" really might be "repeater".
    If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
    With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
    Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
    The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
    If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
    That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

  • I have a mid2009 MacBook Pro for which I have been using a USB WD HD for Time Machine.  I'd like to get a wireless HD  and start a new Time Machine backup for this Mac and retire the 5  year old WD drive.  Can I start over?

    I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine.  I'd like to get a wireless HD  and start a new Time Machine backup for this Mac and retire the 5  year old WD drive.  Can I start over?

    no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
    See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
    Peace
    Data Storage Platforms; their Drawbacks & Advantages
    #1. Time Machine / Time Capsule
    Drawbacks:
    1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
    2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
    3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
    4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
    5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
    6. Restoring from TM is quite time intensive.
    7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
    8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
    9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
    10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
    11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
    12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
    13. *Level-1 security of your vital data.
    Advantages:
    1. TM is very easy to use either in automatic mode or in 1-click backups.
    2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
    3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
    #2. HD archives
    Drawbacks:
    1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
    2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
    Advantages:
    1. Fills the gap left in a week or 2-week-old HD clone, as an example.
    2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
    3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
    4. Best-idealized 1st platform redundancy for data protection.
    5. *Perfect primary tier and level-2 security of your vital data.
    #3. HD clones (see below for full advantages / drawbacks)
    Drawbacks:
    1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
    2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
    Advantages:
    1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
    2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
    3. HD clones are unconnected and isolated from recent corruption.
    4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
    5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
    6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
    7. *Level-2 security of your vital data.
    HD cloning software options:
    1. SuperDuper HD cloning software APP (free)
    2. Carbon Copy Cloner APP (will copy the recovery partition as well)
    3. Disk utility HD bootable clone.
    #4. Online archives
    Drawbacks:
    1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
    2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
    Advantages:
    1. In case of house fire, etc. your data is safe.
    2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
    3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
    4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
    5. *Level-1.5 security of your vital data.
    #5. DVD professional archival media
    Drawbacks:
    1. DVD single-layer disks are limited to 4.7Gigabytes of data.
    2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
    Advantages:
    1. Archival DVD professional blank media is rated for in excess of 100+ years.
    2. DVD is not subject to mechanical breakdown.
    3. DVD archival media is not subject to ferromagnetic degradation.
    4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
    5. DVD media is once written and therefore free of data corruption if the write is correct.
    6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
    7. Best-idealized 4th platform redundancy for data protection.
    8. *Level-3 (highest) security of your vital data. 
    [*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
    #6. Cloud based storage
    Drawbacks:
    1. Cloud storage can only be quasi-possessed.
    2. No genuine true security and privacy of data.
    3. Should never be considered for vital data storage or especially long-term.
    4. *Level-0 security of your vital data. 
    Advantages:
    1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
    2. Easy source for small-file data sharing.

  • Best configuration for Time Capsule & Airport Extreme running one wireless network?

    We just moved to a house that does not have Ethernet pre-wired so I've had to re-setup the wireless network in a different configuration and it seems we're experiencing deteriorated wireless signal for devices like laptops.  It will work perfectly fine (and fast! wheee!!!) but then it will slow to a crawl and mostly timeout.  before I reset everything and start from scratch, I'd like some help.  As an FYI, when connected via Ethernet to either of these, Internet is blazingly fast… so my problem here is the Wireless portion. 
    As some background, here is how we had the network set up in the previous house which was working great (although it was wired for Ethernet which made things A LOT easier):
    Airport Extreme (4th Generation)
    Wireless Mode: Create a Wireless Network
    Internet Facing (Connected to the Cable Modem)
    Location: Upstairs Utility Closet (with Smartbox and cable modem)
    Time Capsule (1st Generation)
    Wireless Mode: Extend a Wireless Network
    Joined to existing network above, but also connected to the Ethernet jack
    Location: Upstairs Office
    Here is the current set up we have running:
    Time Capsule (1st Generation)
    Wireless Mode: Create a Wireless Network
    Internet Facing (Connected to the Cable Modem)
    Radio Mode: 802.11n (b/g compatible)
    Location: Upstairs Office
    Airport Extreme (4th Generation)
    Wireless Mode: Extend a Wireless Network
    Joined to existing network above with NO incoming Ethernet connection
    Location: Downstairs Family Room
    My understanding is that the Airport Extreme should pick up and relay the signal downstairs, as well as provide the router for the devices downstairs that need Ethernet (TiVo, Apple TV, etc).
    So, my question is (and thank you in advance for helping me sort this out!), what would be the best configuration to optimize the Wireless performance in the house? 
    Also, for whichever device is the one picking up the existing network and providing the router capabilities for the Tivo and such, is it possible for it to pick up but not rebroadcast the signal?  I think in this new house we may have a good enough signal from the office, without the need to rebroadcast it.  My theory is that in this house, they are too close together and interfere with each other and/or devices aren't sure which to choose so they bounce back and forth endlessly.  Again, just a theory.
    Many thanks again for your help! If I've left out any information, please ask and I can provide. 

    Should they be running on the same channel (as with the "Extend" option previously? Or just both on Automatic channels?
    I would recommend the Automatic setting on both devices because this will allow each router to scan and choose an open channel automatically. If  you want to set the channels manually, keep them separated by at least 4-5 channels. You would not want to ever use the same channel for both devices in this type of "roaming" setup.
    Is there a way to limit bandwidth per device (or action) so that it doesn't monopolize the network and keep other devices from using it?
    Nothing that I am aware of. It sounds like  you have some young users who are likely visiting Bit Torrent sites, which will really gobble up the bandwidth with big, heavy downloads. The Time Machine has to back up the same files again when it makes the next pass, so that clogs things up again.
    Backups would go 3-5 times faster, on average, if the computer(s) could connect using Ethernet, but I understand that wires are not cool with the younger crowd.
    should BOTH the TC and AE be set up in Bridge mode?
    The AirPort Extreme should be set up in Bridge Mode.
    The Time Capsule...it depends. If the TC is connected to a simple cable modem...then the correct setting for Connection Sharing would be "Share a public IP address" on the TC. That is because a simple modem has only 1 IP address to deliver. The TC takes that address and "shares" it with other devices by setting up a local network for all your other devices.
    If the TC is connected to a gateway....a combination modem/router in the same box that usually has 3-4 Ethernet ports on the device....then that device would be considered the main router on the network and the TC would be  configured in Bridge Mode in that case to function correctly on the network.

  • My final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

    my final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me.  I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

    What did Apple tell you about what they did (or did not) find here?
    See if working on the main disk is any faster.
    USB2 is glacial, as I/O interconnects go.  And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too.  FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
    Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

  • HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

  • How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

    How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

    Maybe you are looking to re-purpose this equipment versus getting rid of it if so, the best thing to do is search the internet for tutorials.  And I say this because it's what I would do, there are a lot of tutorials online.    Hope you can find good use for them.  Worse case scenario if you can't find something right now, package them very nicely and when you come across something unbox and enjoy.  I've re-purposed a mac color classic and LOVE IT!!

  • HT4245 i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

    i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

    To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number.  Since you can't make calls on the Mac.

  • Using macbook as a wireless router for non-apple devices

    im trying to use my mac as wireless router for my xbox. i went into share under system preferences, and made a network with a WEP password. I can see the network on my xbox but it requires an IP adress...
    i guess what im really asking is, if the mac can automatically assign IP adresses to devices on the network

    I use my MBP regularly to share internet connection with PCs. Usually the PCs do a 'search' for a network and then 'connect' to the network name set in the Airport options... drop down panel. They get the IP automatically.
    In the system preferences>share> there is a button on the right bottom which says 'airport options..' and in the drop down panel, you set the name or SSID and the WEP key.
    Maybe you should check XBOX settings if the network settings are manual or automatic?
    Hope that helps.

Maybe you are looking for