Using F1 to access the online help in Visual Studio 2013 does not work anymore! Any help available?

Hi,
since some days I get the following message after pressing F1 in VS2013 to access the online help:
Any help to solve this available?
Kind regards,
Martin
Martin Lemburg Berlin / Germany Martin0815@twitter martinlemburg@facebook http://about.me/Martin0815

Hello Martin,
could you try clearing you browser cache like indicated here:
[1] http://blog.mischel.com/2011/09/13/cant-get-help/
If this does not help, please try changing your default browser to find out where the problem is located.
Regards,
David Schneider
Developer-Hotline for MSDN Online Germany
Disclaimer:
Please take into consideration, that further inquiries cannot or will be answered with delay.
For further information please contact us per telephone through the MSDN-Entwickler-Hotline:
http://www.msdn-online.de/Hotline
For this post by the MSDN-Entwickler-Hotline the following terms and conditions apply:
Trademarks,
Privacy
as well as the separate
terms of use for the MSDN-Entwickler-Hotline.

Similar Messages

I have iMovie '11, and I am unable to access mpeg HD video files that I want to edit. The files are fine (I can open and watch them using VLC), but I cannot seem to import the files into iMovie. File Import does not work. Any suggestions??

More detail: I have a bunch of mpeg HD video files that were shot on a SONY HDR-HC3 Handycam camcorder. I would like to edit these into a single video production. I can access and view the mpeg files using VLC (Quicktime does not work with them). However, I seem to be unable to get the mpeg files to interface with iMovie '11 -- I cannot use the File --> Import command, nor can I drag-and-drop them into iMovie.
Is there something anyone might suggest to get this to work? Or are these files incompatible with iMovie? If so, I assume I must purchase a different video editing software program (e.g. Adobe Premeir Pro). Suggestions???
Many thanks in advance for your time and consideration

Yes, I tried that.   The files were ordered by their original numbers as imported from the camera, but I batched them through Phocoshop to downsize all of them into a more manageable file size.   I opened that destination folder from quick time from where it said select image sequence.   I clicked on the first one and opened it.   The result was a large image with an arrow indicating a movie was ready to go.   When I pressed the arrow, though, I realized it had only imported that one frame so there was no movie.   The files are Jpgs and are about 450 KB each.
    To your knowledge are there any links to iMovie tutorials or quick time tutorials that may address this situation? Maybe there will be one I haven't looked at yet.
    Thanks

Anyone has a solution for the problem: typing keywords and suddenly it does not work anymore. Mostly I have to restart my iphone 4Gs

Does anyone has a solution for this problem?
Since I updated to iOS 6 sometimes my keywords did not work.
I always have to restart my iPhone to have it work.
It's ridiculous to always restart my phone.
If you also have this problem you can repost + give some tips.
Thanks and greetings,
Max Louis

Hi Alo816,
I'm sorry to hear you are having such extensive issues with Messages on your iPhone. If you continue having issues sending or receiving Messages, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Messages - Apple Support
If you continue to have issues with Messages after that troubleshooting, especially if it is still having or crashing, you may want to make sure you have a current backup of your data in iTunes, then try restoring your iPhone to factory settings and testing it in that default condition to see if the issues persist before restoring your data. You may find this article useful:
Use iTunes to restore your iOS device to factory settings - Apple Support
Regards,
- Brenden

My iPhone seems to be stuck in headphone mode. I tried plugging in and unplugging the earbuds several times, but it still does not work. Any other suggestsions?

My iPhone seems to be stuck in headphone mode. I already tried plugging and unplugging my headphones, but it still is stuck in headphone mode. What can I try next?

I've read other methods but they didn't work for me.
You can try cleaning the jack with a q tip, blowing into the jack and then pulling in and out the headphones (thi worked for my friend).
The toothpick trick which i got from this link here : http://science.opposingviews.com/turn-headphone-mode-off-iphones-15782.html
Ive also heard although it isn't the best, using an air compressor to clean out any gunk in the jack that can help aswell.
I'm utterly frusturated at this point. I'm just going to go to the Apple Store and see what they have to say. If of these at home remedies don't work i suggest you do to and brace yourself for repair costs.
Best of luck

The raise to speak feature on Siri does not work

The raise to speak feature on Siri does not work anymore is there any possible fixes for this

I had the same problem (iPhone 5), but the fix was simple.
Turn off your Bluetooth. Yeah, I know this sounds crazy. Here's why.
When you use Siri with the "Raise to Speak" feature activated (Settings/General/Siri), this enables the proximity sensor that lets the iPhone know it is near your ear, activates Siri, and turns off the display.
However, if you are using a bluetooth headset (like I do), then this sensor is turned off automatically, because you will be speaking thru your bluetooth and not the iPhone to activate Siri and make calls.
To prove this, do the following test.
Make sure "Siri" is on, and "Raise to Speak" is on (Settings/General/Siri).
Turn off your Bluetooth (Settings/Bluetooth).
(TEST) Hold your phone in front of you, and with a natural motion, bring the phone to your ear (as if you are answering a call). Siri will automatically activate, assuming you want to ask it/her a question (very cool feature). And the screen will turn offautomatically.
If you have never used the "Raise to Speak" feature, this feature automatically activates Siri when you raise the phone to your ear (really a cool and helpful feature). It may take a little practice to get used to this. I struggled at first, but soon got the hang of using a natural motion to bring the phone to my ear. Starting with the phone in front of you, the phone should be "almost" parallel to the ground when it gets to your ear. It may take several practice tries to get it, but you will get it, and you will be hooked on this neat little feature.
Ok, with this done, this proves your proximity sensor is funtioning properly.
Now, turn on your Bluetooth (Settings/Bluetooth).
And repeat the same (TEST) above.
This time, Siri should not activate, and the screen should not go off. Why? This is because your voice communications with callers (and Siri), are now going thru your Bluetooth, and not the phone handset. Because of this, their is no need for the proximity sensor, so it is automatically turned off (when Bluetooth is on).
I can only speak for me and my situation, and what worked for me. However, their may be other issues regarding the proximity sensor separate of this that I am not aware of.
I hope this helps you.
Man I love the "Raise to Speak" feature, you will too.
God Bless You All.

Network Magic v 5.5 I cannot access the online help from the links within NM

When I try to access the online help from any link button in NM V5.5 including the main help > Help center > Network magic help, the browser will open and resolve address , Status bar will state done but I have a blank page.
The URL in the address bar is
http://go.purenetworks.com/redir/webhelp/nm/_cover.htm?pn=nm&a=5.5.9195.0&as=0&ad=2&bt=shp&b=Pure&dc=Pure0.LinksysRouterSetup&dt=OLN&k=1611759616&ct=cisco&ag=d9429c0fe2fd40b9&g=d04c74e28eb95300%2Cb2610a4f03b2f988&lcid=1033&ulcid=2057&am=99&it=upgrade
I am running windows 7 Ultimate, have tried
Firefox 3.6 and
IE 8.0 -- I have put the Url into the trusted zone and the web page will again show up as done and status bar shows trusted zone
I have tried all this with my Firewall & AV (Kaspersky Internet Security 2010) both on and disabled
NB The "ask linskys link works" as does the "community forums"
The Main help > Help center >Getting Started also works.
( I am running the WRT610N Router set up by Network Magic)
Many Thanks

I've seen this too use http://support.networkmagic.com
Mikro the Owner of the Linksys BEFCMU10_V4-UG Modem & The BEFSR41v4 Router.

I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10. Please help.

I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10. Please help.

It appears that you may not have a properly installed OS X system.
You must be connected to the Internet to reinstall OS X.
In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
Select “Disk Utility,” and then click Continue.
Select your startup disk from the list on the left, and then Repair Disk.
After disk is repaired, select Reinstall OS X, then click Continue.
Follow the onscreen instructions. In the pane where you select a disk, select your current OS X disk

Recently purchased an unlocked iPhone4 handset only online. When my O2 sim card is used in handset it does not work. Any advice?

Recently purchased an unlocked iPhone4 handset only online. When my O2 sim card is used in handset it does not work. Any advice?

When you say it doesn't work, did it give you any type of message when you activated the phone with the O2 sim card?

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

I use the Icalendar at home, at work, and on my Iphone. I don't want to have to "sign in" every time I need my calendar. How do I stay signed in? I have checked the "keep signed in" box, but it does not work.

I use the Icalendar at home, at work, and on my Iphone. I don't want to have to "sign in" every time I need my calendar. How do I stay signed in? I have checked the "keep signed in" box, but it does not work.

Welcome to the Apple community.
Staying signed in at iCloud.com is not a problem for me. Try resetting your browser or emptying its cache.

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

Hi Nealeh
Thanks i think I got it working of a fashion.
Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
The scenario is:- say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
Had she had a normal skimpy bikini on, no problem!
If i don't solve it, she will get fired!
Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
"Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
I have Safari on this iPad. Guess that is all it runs.
So technology is not my friend today!

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

The search function on my "sent" mail does not work - can anyone help?

The search function on my "sent" mail does not work. When I type in more than two letters into the saerch box - the sent mail screen goes blank. Any ideas how to fix this? Apple technical support has not been much help for the past five days...

As this is the forum for the MacBook Pro hardware, your question will be better answered in the OS X Snow Leopard forum where the Mail app is discussed.

I have updated itunes and the newest software. My home button does not work. Please help

I have updated itunes and the newest software. My home button does not work. Please help

It could be that your button has justy gone out. You may try getting compressed air to blow out any dust in there. If that doesn't work, you may have to get your button and ribbon replaced.

I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

Download the yahoo email app, if you already deleted and reinstalled the email account and still have issue.
This is a known issue with Yahoo email account.

Using F1 to access the online help in Visual Studio 2013 does not work anymore! Any help available?

Similar Messages

Maybe you are looking for