Using Faces recognition data on multiple libraries

I have several libraries. Each needs to be updated with this upgrade. However, each needs to learn ALL faces instead of learning from the previously updated libraries. So, can one manipulate the data so all libraries can access the same Faces resources?

No - as far as iPhoto is concerned there is only one library - the current one - there is no current way to have multiple libraries share a faces database - it is a part of the individual library database
You can suggest to Apple - iPhoto menu ==> provide iPhoto feedback
After it is updated for iPhoto '09 - http://www.fatcatsoftware.com/iplm/ - You may be able to merge the libraries using iPHoto Library Manager so you have only one which will have al the faces data in it but that probably does not give you what you want - unless you have multiple libraries due to the old fairly low capacity of iPhoto 5 and earlier
LN

Similar Messages

  • BUG: Face recognition data not saved to images.

    i have the option to automatically save XMP data into the images activated.
    so all keywords and metadata changes are not only saved to the catalog but also into my DNG and TIFF images.
    now this works fine for everything except the new face recognition data.
    i mean the areas (rectangles) where the faces are.
    i guess the problem is that the images already contain the keywords (names) of the persons in the images.
    what i did was using the rectangles to identify the persons in the images. drawing rectangles around their faces and name them.
    this info about the rectangle positions is NOT automatically stored in the image files. not after hours of letting LR run idle.
    this info is only stored when i manually save (CTRL+S) the images or do something other to the metadata (like adding NEW keywords to it).
    so in short:  just adding the face region data (the rectangles) will not trigger the automatic XMP save function when the name keyword was already asigned as keyword to the image.
    that´s very bad and must considered a bug in my opinion..
    i don´t like to rely on the LR catalog only. it´s unsave even with backups.
    i want that the metadata info is stored in the images.
    also when i give away my images i want that the metadata is in the images.
    that´s why "automatically save XMP" is always active and very important for me.

    I don't have any info but repost your original info at this site.  Supposedly Adobe reads this and it should not get lost in the clutter  I have posted a few bugs there and they were acknowledged but not fixed but Adobe seems to be pretty good at fixing potential data loss bugs/problems which I consider this to be if it is working as you describe.
    Photoshop Family Customer Community

  • Why am i unable to use face recognition software using youcam5

    why am i unable to use face recognition software using youcam5 cyberlink software

    Hi,
    Is this of any help?
    http://www.davidebarranca.com/2013/02/how-to-open-and-retouch-hasselblad-3f-scanner-files- in-photoshop-cs6/

  • Did being able to use the same data in multiple apps get added?

    In the new iOS 4.2, did Apple include the ability to use the same data, eg PDF files in multiple apps? I have several hundred PDF files that I want to use in three different apps.
    Or is it still the same, that you have to load up (and use valuable space) the same data again and again for EACH individual app?
    Thanks

    I don't know but think it would mean the PDFs must be stored somewhere on the device itself (like on a computer). Then also the apps must be designed to use the files from there. So a change in the iOS wouldn't be all that's needed.

  • Satellite C670-17G - cannot use face recognition

    i have Satellite C670-17G
    i have found preinstalled on my laptop the face recognition.i wonna youse it.
    i think i have updated the drivers...
    i have try the link.but it wont help me.

    Do you use your notebook with original preinstalled OS (WIN7 64BIT HOME PREMIUM)?
    Sorry but I dont understand why you cannot use it.
    Can you start this application or not? What is the problem?
    Is webcam recognized and installed properly in device manager?

  • Multiple Libraries for Multiple Users on iTunes

    Is there a way - using iTunes 7 - to have multiple libraries? Our family shares a computer and I would love to have separate libraries.
    Thanks.
    Tas804

    Hi there
    Hold down the 'alt' key for a couple of seconds when you launch iTunes from the dock.
    You should get a prompt to create a new library, or choose another library to launch.
    Good luck
    noel

  • Error in importing data from multiple ASCii files, Concatenat​e

    I am trying to use the "Importing Data From Multiple ASCII FIles.VBS" and the "Concatenate Groups.VBS" scripts downloaded from here, http://zone.ni.com/devzone/cda/epd/p/id/3870. When I run the importing data script and test it by highlighting the example data that comes with the download I get an error. "Error in <Importing Data From Multiple ASCII Files.VBS> (Line:60, Column: 11):  Variabls is undefined: 'AscIIAssocSet'  "
    The offending line of code is "  Call AsciiAssocSet(FilePaths(i), StpFilePath) ' assign STP file    "
    Screenshots of the error are attached.
    Can anyone tell me what this error is?  Am I just doing something wrong? Getting quite frustrated.
    Thanks in advance.
    Attachments:
    concactenate1.png ‏261 KB
    concactenate2.png ‏243 KB

    Please have a look at the DIAdem Example to concanate channels. Its delivered with DIAdem.
    Examples > Creating Scripts > Scripts > Appending Channels to Each Other
    Please use a dataplugin (File -> Text DataPlugin Wizard...) or the csv plugin to load your data.
    Greetings
    Andreas
    P.S.: The one you have downloaded needs the old Ascii Wizard that is not activated by default in newer DIAdem versions.
    If you want to use it anyway:
    Settings -> Options -> Extensions -> GPI Extensions ...
    Add gfsasci.dll

  • Face recognition in shareoint

    Dear Experts,
    could you please suggest me that, can we implement document approval in SharePoint  using  "Face recognition"?
    Thank you..
    Hari

    Yes. I'll need a team of 20, four years and a budget of $20 million and approximately 460Kg of Jelly Beans (instalment deliveries of Jelly beans would be accepted).
    In practical terms, not as far as I know and not at a reasonable price point. Your best bet would be to leverage the face-unlocking tools on mobile phones to 'authenticate' users and then use those devices to sign documents in some way. That could probably
    shave a year or two off the timeline.
    I would do that for only $1 million :)

  • IPhoto 9.5.1 face recognition slow with large number of photos ( 20,000)

    I have a new fast Imac with new Iphoto 9.5.1. I have >20,000 photos. When I use face recognition with people who have >50 photos associated with them, the rolling ball continues for 20-40 seconds. I didn't have this with the same number of photos with my old Imac2009 with Iphoto 9.4.3, 2011.
    Thanks.

    That is probably still the initial setup for face recognition for you new iPhoto version.  Once the "Faces" database has been rebuild, the performance  should get better. Give it a day or two.  If the problem persists, back up your iPhoto library and rebuild it.
    Hold down the key combination alt/option- command ⌥⌘ firmly and double click the iPhoto library to launch the First Aid Tools. Keep holding down the keys, until you are seeing the First Aid Panel.  Select the entry "Rebuild Database" from the panel and click "Rebuild".

  • Update 5.7.1 no face recognition

    Dear Community
    i've received my lightroom 5 with my canon camera.
    After reading that the update 5.7.1 adds face recognition i hit the update button but i received a 404 error at the adobe page.
    So i googled the File and downloaded it via the adobe Website.
    Lightroom_5_LS11_mac_5_7_1.dmg This told me that i'm able should be able to use face recognition. But i receive a update message that i should update lightroom
    If i look at About Program there is the right Version.
    Message about the update attached.
    Message about software attached.
    Thank you in advance for any suggestions.
    Tim

    I think the mistake is Lightroom treats this as a simple "update," but it's really entirely "New Software" apart from a regular update. One part of the screen says "Update," and just below it says "New Software."
    I also was mislead. You're not alone!
    Or maybe they don't have the correct update file on their website.

  • Creating multiple libraries and using an external drive for data

    I'm a recent switcher and new to iphoto. On the windows platform, I used adobe album. I have a around 10k of images that I put on an external drive which is attached to my new imac. I deleted the iphoto folder and redirected it to my images on my external. All is working great. I'm looking for some advise on work flow of file/iphoto management. i.e. I'm assuming the more images I accumulate, the slower I photo is going to run? I hear you can create multiple iphoto libraries. Will that only load the photos that are associated with the library and I'm assuming optimize iphoto's performance versus always loading every photo you have taken every time you work in iphoto? If adding libraries is the way to go, can someone direct me to instruction on how to do this?
    This may be beyond this threads scope but I plan to put all my data (iphoto, imovies, itunes) onto an external drive in order to keep the imac main drive as clean a possible. Is my thinking correct in doing so. Any negative repercussion in doing so?

    Joe:
    I'm assuming the more images I accumulate, the slower I photo is going to run?
    You'll have to get quite a lot of photos into iPhoto before you start to see a real slowdown in performance. Users have reported libraries of 40K files and they perform just fine. However, do not keep all of rolls open as that will really do a job on the performance. Just open the rolls you need and close them all before quitting.
    Yes, you can use multiple libraries and only load what's in each. I use iPhoto Library Manager to manage and move quickly between 10 libraries. With the paid version of iPLM you can move albums and/or rolls between libraries as needed and keep the keywords, ratings, and comments intact.
    Using an external HD in order to maintain sufficient free space (10G minimum is what I recommend) on the boot drive to help optimize performance is a very good idea.
    As far as any negative aspects, it would be a good idea to have a second external HD as a backup to the working external HD. You can't be too careful with those image files (and other important files) that can't be replaced.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Face recognition using elemets 8 to lightroom 3

    Experiementing with face recognition using elemets 8 then trying to export the meta data to my lr catalog.. so far not working.  any ideas?

    In PSE 8, when you add a keyword to a recognized face, that keyword is added to the photo.  If you then do File > Write Keyword Tag in PSE, the keyword tag coresponding to the face will be written to the photo. LR will then be able to import that keyword.  But the information about the rectangular location of the face within the photo isn't available to LR.

  • How do I go from using a single Apple ID with multiple libraries to using home sharing?

    Until now my wife and I have opted to share our iTunes/Apple ID and use multiple libraries to manage our iPhones. This has become increasingly difficult...with issues such as having apps I've downloaded that she doesn't want automatically downloading to her library and even her phone. Now, add in the fact that I want to continue to manage my iTunes library from our PC and allow her to manage hers from her new MacBook Pro and we have good reason to move to home sharing with separate Apple IDs for each of us.
    My question is the logistics of doing so. Not only do we need to replicate her existing library on a new Apple ID, but then we need to migrate all the necessary files over to her MacBook Pro. Quite honestly, I don't even know where to begin. Is it possible to associate her existing library with her new Apple ID without having to create her library from scratch? Then is there anyway to migrate only the items in her library over to her MacBook Pro as opposed having to move all of our music & apps? Where do I begin?
    Thanks!

    Okay...I misunderstood and thought we needed separate ID's...but I see we actually need to use the same ID which simplifies things in my mind a bit. But still some followups...
    1) What do you mean by restore the library on her computer? Simply open her library file in iTunes?
    2) On our current machine...media is actually split between a couple folders but all under the My Music folder. But there are multiple subfolders (iTunes, Her iPhone, and Amazon MP3). I presume as long as I copy over the entire My Music folder there shouldn't be any access issues when the library is opened on her machine?
    3) Is there any easy way to get rid of all the extra files that she doesn't have in her library? For instance, all my music and apps that she doesn't actually want, is there any easy way of separating those out from the files that are actually linked to in her library? Vice versa for me...once we've go her library set up on her machine, any easy way to purge all the extra files from my PC that aren't actually in my library?
    Thanks!

  • Display data from multiple document Libraries in List View Webpart

    Hi All,
    I want to display data from multiple document libraries into one list view webpart(custom i have created)
    I went through the following link http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-webpart.aspx
    but it tells to display only from one document library.
    My motive behind displaying data in the list view webpart is to achieve the functionality of Check In ,Check Out and other OOB features.
    With Regards,
    Jaskaran Singh

    Hi,
    As there is no such OOTB feature, a workaround is to create a visual web part to gather items from libraries and implement functionalities like Check in, Check out files
    in different libraries.
    The links below will provide more details:
    Create Visual Web Parts in SharePoint
    2010
    A demo about displaying list items in visual web part:
    http://www.dotnetcodesg.com/Article/UploadFile/2/217/Web%20Part%20in%20SharePoint%20To%20Show%20All%20List%20and%20List%20Items.aspx
    About the Check In and Check Out:
    How to Check In a document programmatically
    SPFile.CheckIn method
    and SPFile.CheckOut method
    Best regards
    Patrick Liang
    TechNet Community Support

  • Adding data to multiple tables using one form in Access 2010?

    Hi All,
    I have a access database with two tables and I want to create a single form to enter data into that tables.
    How to adding data to multiple tables using one form in Access 2010?
    I don't have to much knowledge of access database?
    Please help me
    Thanks
    Balaji

    You really don't enter identical data into 2 tables.  You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables). 
    Maybe you need to read this.
    http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
    Think about it this way...  What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change.  WHOOPS!!  Now, you've got a BIG problem.  For instance, you have a customer
    named Bill Gates.  In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039.  Now you have 2 addresses for Bill.  Why would
    you want that???  Which is right?  No one knows.  If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
    and which is wong...and then update the one that is wrong.
    Post back with specific questions.
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Maybe you are looking for

  • How to View Slideshow but NOT in FULL SCREEN?

    I often would like to start a slideshow of images on my mac but I don't want it to take up the whole screen. I just want to view the slideshow in a window. I have tried both iPhoto and Preview and can't figure out how to do that. Is there a way to do

  • Enhancing FI_Gl_4

    Hi Friends I have to enhance FI_GL_4 with purchase order number and its line item values. From Which table i need to get these values.Any idea. Regards Vijay

  • Data loss in original documents

    Hi, we are running R/3 46C with DMS. Typical functionality is as follows: Using the online vault (ftp server), we checkin and out the originals from the DMS. We use MS Word/Excel as workstation applications to create/update the originals. e.g. the or

  • What kind of database driver should use for database adapter  in BPEL?

    what kind of database driver (XA or non-XA) should use for database adapter in BPEL? I have only one database adapter and no JMS. Thanks Jo Edited by: 799095 on Sep 30, 2010 8:35 AM

  • Firefox locks up when i try to do anything on it

    I wa ussing firefox yesterday and all of a sudden it 'locked' up. I restarted it and the same thing happenned--many times. I removed firefox and reloaded it from a new download exe. Same thing happens when I try to do anything.