Using fact sheet 'BP_ACCOUNT_FS' in IC business roles

Hi experts!
I have a requirement to customize the fact sheet in IC business role, where the 'ICCMP_AFS' fact sheet always opens. But I need all the assignment blocks and information that is in 'BP_ACCOUNT_FS' fact sheet.
So, is there any way to make that in IC Business Roles there was fact sheet 'BP_ACCOUNT_FS' but not 'ICCMP_AFS'?
This question is extremely important for me.
Thanks in advance,
Andrew.

Hi, Chimalwar!
What I've done:
1. Defined logical link 'ZIC_AFS' in transaction CRMC_UI_NBLINKS, by copiyng it from standard 'IC_AFS'. I only changed the parameter and put it 'BP_ACCOUNT_FS'.
2. Define Profile (choosed the profile I need) -> Define Generic OP Mapping
Choosed my navigation bar profile and made the following customizing:
Object type: FACTSHEET
Obj.Action: B Display
Use target: nothing checked
Target Id: nothing selected
Use Link: checked
LogLink ID: ZIC_AFS
3. Transaction 'BSP_WD_CMPWB', Component: BSP_DLC_FS -> Component structure browser -> Views -> BSP_DLC_FS/factsheet. I've created my own configuration, copying it from standard 'BP_ACCOUNT_FS':
Config key: my own, for my business role
Component usage: <DEFAULT>
Object Type: 'BP_ACCOUNT_FS'
Object Subtype: <DEFAULT>
After confirming Business Partner I can see the fact sheet I defined.
But my task was to see the fact sheet of the business partner when I select it in a call list, before I confirm it. And there was ABAP.
Regards,
Andrew.

Similar Messages

  • Fact Sheet - implementing BI Reports

    Hi Experts,
    how can i implement my own BI Reports into the Fact Sheet in CRM 2007. I know the customizing point "maintain Fact Sheet" but the problem is that if I choose BP_FACTSHEET and take a look into the view assignments I only find the entry
    BP_FACTSHEET     BIReport     DEFAULT     BI Report
    I know the customizing "Display SAP Netweaver BI Reports in CRM" also. But where can I adjust which BW report should be shown in the factsheet?
    It would be great if you could give me any hints about this...
    regards
    marc

    Hi Mark,
    This is a two step process, first you need to define your own BI report id's in CRM and then integrate them in the fact sheet as follows
    1. Specify BI Report in SAP CRM
    To display BI reports in the CRM WebClient UI, you need to maintain the BI reports in Customizing with a unique ID.
    You do this in Customizing for Customer Relationship Management, under   UI Framework->UI Framework Definition->Display SAP NetWeaver BI Reports in CRM->Define BI Reports.
    You specify the following:
      BI Object Type: For example, Template 7.x.
      BI Object Key: This is the technical name of the report in SAP NetWeaver BI.
      BI Report ID. You can reuse the object key or enter any name you want to use.
    2. Add BI Report View to Account Fact Sheet Overview
      1.     In the BSP WD Workbench (transaction BSP_WD_CMPWB), enter the component BSP_DLC_FS, and choose Display.
      2.     Double-click the view BSP_DLC_FS/factsheet and go to the Configuration tab page.
      3.     Select the Account Fact Sheet (BP_ACCOUNT_FS) and click Search.
      4.     In the result list, click the <DEFAULT> hyperlink in the Role Config. Key column.
      5.     Select BI Report from the block of available fact sheet views and add it to the block of assigned fact sheet views.
      6.     Change the title to the name you want to use for the assignment block and save your changes.
      7.     Click the Configuration hyperlink of your entry and then Attributes.
      8.     As the BI report ID, enter the report ID you defined in Customizing.
    you can find additional information in the following sap help site.
    http://help.sap.com/saphelp_crm60/helpdata/en/4d/2ae3f79e1d49d9be306f7768d55fba/frameset.htm
    Br,
    Kiran

  • IBase in Account Fact Sheet

    Hello experts,
    I have a question concerning the account fact sheet:
    We want to show the IBASE of the customer in the Fact Sheet (BP_ACCOUNT_FS), so I went to the Workbench and added the IBASE Component Fact Sheet. Unfortunately the available fields don't contain information about the product ID.
    Within the Account Fact Sheet of the IC WebClient the section of the IBASE does contain information of the product ID.
    So is there a possibility to use the IBASE section of the ICCMP_AFS in the BP_ACCOUNT_FS?
    (Adding the ICCMP_IBASE0001 to BP_ACCOUNT_FS in Customizing and Workbench withour additional settings did not work).
    Thanks for your help in advance!
    Regards Anne

    Hi Aakshi,
    Please check in transaction SICF in the BW system that the required service is activated - note 1124553 will help with this.
    Kind regards,
    Vanessa.

  • FACT SHEET Configuration not saving in transport to move to QA system

    hi Experts
    I am setting up the Account Fact Sheet BP_ACCOUNT_FS for my users and the only configuration that is saving is the configuration of the layout of the fact sheet to a transport.  The actual settings or configuration within the fact sheet is not saving.  For example, I used a BI report and added my query and parameter and while this saves in our development box, this will not save in the transport to move up through the systems.
    Any thoughts?  I already have a message open with SAP but checking to see if anyone has an immediate solution.
    Thanks,
    Chris

    Hi,
    P-table is an time independent attribute table ie it contains all the attribute info. in that table. so when u added a characteristic to that infoobject, u can find that entry in the P-table.
    Also M is a view on P & Q tables. It is not a table.
    T- ie Text table will contain only short,medium and long texts related to that info object.
    so when u add a characteristic  to infoobject it will be refelcted in P-table or Q- only. Not in Text tables.
    Narendra Reddy

  • Fact Sheet in SAPGUI

    Hi.
    I want to use fact sheet in business partner cockpit.
    I am dissatisfied with Standard info block class.
    I want to change info block.
    How do you make info block? (CRM part)
    Development?
    And I want to use BI report to fact sheet.
    (ex. BI Report of Transaction results of relevant BP...)
    Standard BI info block class is
    CL_CRM_CCKPT_IO_BW_REPORT
    CL_CRM_CCKPT_IO_BW_REPORT_BP
    CL_CRM_CCKPT_IO_BW_REPORT_BP_N
    CL_CRM_CCKPT_IO_BW_REPORT_N.
    How do you use BI info block classs and setting value?
    pls help me..
    Thanks in advance.
    youn jik, cho

    Find the solution by myself!
    Regards, Anja

  • Automatic Creation of Fact Sheets with push to MSA

    We are considering using fact sheets within MSA. We would like to periodically refreh fact sheets without human intervention (we do not want our sales people to request a download/refresh of the factsheet business partner per business partner).
    Is there a method to centrally refresh all fact sheets (eg for business partners with a planned business activity in the coming week) and to push these factsheets to the relevant MSA clients ?
    Thanks
    Ronny

    Hi
    U can create BDC for Tcode VA01 in T code SHDB with the validation and ask the ABAPer to create one Y/Z Tcode. Then you input the PO no in the Tcode to create the SO in background.
    Or
    Create BDC for PO AND SO and give logic and validation with input field and ask the ABAPer to crate one Y/Z Tcode to create PO and SO in single execute.
    Thx.

  • Account Fact Sheet - Marketing Campaigns block

    Hello experts,
    I have created a custom fact sheet by copying fact sheet BP_ACCOUNT_FS. Also, I have added the inbound plug MKTGCAMPAIGNS (component is BP_FACTSHEET) into this fact sheet.
    Now when I try to view martketing campaigns data of a confirmed account in the fact sheet, the marketing campaigns block shows "No result found", although there are marketing campaigns associated to this account.
    Please let me know if whether any further configuration needs to be done to bring marketing campaigns data to the fact sheet.
    Thanks in advance.

    Hi,
    the marketing campaigns block in fact sheet will not work. and it seems that this will not be corrected given a lot of difficulties.
    you might have to use 'Interaction History' assignment block to list the related campaigns and possible to navigate as a walkaround.
    Hongyan

  • In Fact Sheet, Open Leads View is displaying all Leads

    Hi Gurus,
    I have configured Account Fact Sheet(BP_Account_FS).
    I have added view "Open Leads", which should "display the last n leads that have status "open" or "in process".
    But In my case "Open Leads" is displaying all the Leads, which have status "Converted" & "Rejected" also.
    Anyone has come across with this. What are your suggestions?
    Thanks & Regards
    Rohan

    Hi,
    Raised an OSS, there was a programming error, so a new SAP Note has created SAP Note No. 1319703.
    Thanks & Regards
    Rohan

  • Print Button on Customer Fact Sheet

    Hello guys,
    we are using Fact Sheet in Portal out of CRM. On Top of this there has to be an iView Account-Selector (com.sap.pct.crm.fct.account.selector). In this iView is an Button Print, which makes it possible to Print Fact Sheet in IE. This button doesn't work here. Is there a special customizing to do, or something else?
    Thanks for your help!
    Regards,
    Daniel

    Hello all,
    the problem was sovled after updating to SPS18 and uploading the newest version of the Factsheet-Framework pars.
    Regards,
    Daniel

  • Configuring Fact sheet for CRM 2007

    Hi guys
    Went through best prcatice B08 and configured necessary steps for my factsheet
    Also checked previous topic discussions and found this subject header under this forum Configuring Fact sheet in IC CRM 2007 : Pls help
    I did exactly as said, factsheet shows under my nav bar, but when i confirm BP and navigate to factheet. It is not showing default view which inlcudes Ibase, Email, Lead and so on
    All I want to see is my master data marketing attributes, physical address and previous transactions of that BP
    Please advice what to do or what Im missing
    Thanks
    Jogi

    Hi,
    In component BSP_DLC_FS and View factsheetyou can select the page type and once the Layout type is chosen, you can select your Fact sheet views from available Fact Sheet Views and there you can assign your views.I think you must have activated the fact sheet button for your PFCG Role.
    I went to Component BSP_DLC_FS and clicked on display.
    Went to views and selected BSP_DLC_FS/factsheet. Where exactly do I select the page types and layouts and my factsheet views? Still fairly new to the the BSP_WD_CMPWB  so please excuse
    Thanks Jogi

  • Cannot modify an authorization object in pfcg role for a business role

    Hi Experts,
    I have created two z pfcg roles from the standard business role CRM_UIU_SRV_PROFESSIONAL  lets say by names zagent and zmanager. My requirement is actually to map these two pfcg roles two a service professional agent and service professional manager custom business roles respectively( I have created these custome business roles from standard business role servicepro) . I have identified an authorization object by name CRM_CO_SE which is basically used to check whether the user is authorized to create service contract transactions. So, in the agent pfcg role, I need to de activate or deselect this particular authorization object so that the agent will not be able to create service contract. (This is not a real time requirement, but an internal assignment). When I change this object in the pfcg by deselecting 'Allow' check box and try to generate, it is not getting generated. I have selected all the options from the 'Expert mode for the profile generation' and still the traffic indicator for that authorization object is yellow.  Am I doing anything wrong?
    Please help me.
    Thanks
    Ajith C

    Hi Leon,
    Thanks for helping me, I have restricted the unauthorized user from creating a new order by disabling the 'New' button by checking the business role in  the code. The pfcg configuration, I am skipping it for now.  I have one mnore requirement. When one clicks on any items in the search result for the Service Contracts, it opens the details of that service contract with an 'edit' button. I can disable this button using do_output_preparation method for the some business roles. However, I want to disable this after checking a condition. The condition is that, edit button should be active, only if that service order was created by the employee who has currently logged on. I am relatively new to CRM and I could not figure how I can check it during run time. Could any one please help me with this?
    Thanks,
    Ajith

  • Navigating to another component based on business role

    Hello Experts,
    I have a hyperlink created for Lead No to navigate to Lead Overview page from my Z component.
    How do I restrict this navigation based on business role?
    Thanks in advance,
    Regards,
    Surekha.

    Hi Surekha,
    You can get the Business Role of the logged in user using the code in this thread.
    Re: Business Role of logged in user
    Now in the event handler or outbound plug being used for the navigation, determine the business role.Based on this, write an exit statement to restrict navigation. You can give a message to notify the user.
    Regards,
    Masood Imrani S.

  • Fact sheet not visible in new Z business role

    Hi all,
    On creating a new Z marketing professional role after copying from the standard role, I am not able to find the option of viewing the Account Fact Sheet under the link "More" in the customer master. i didnt find any customizing wherein I could assign the fact sheet to the business role.
    I've assigned the fact sheet to transaction types under Settings for activities but didnt work out. Any further settings ??
    Deserving points to be rewarded, Regards,
    Jacob.

    Jacob,
    check note 1040229.
    you have to maintain cluster view CRMV_BUIL_PRT (tx sm34)
    there you have to link your newly created business role (its PFCG role) to the form view CRM_ACCOUNT_OVERVIEW_PRN
    and to class/interface CL_UIU_PRN_ACCOUNT.
    should work this way
    regards,
    Ineke

  • Business partner in Fact Sheet for Individual object

    Hi Folks,
    I am unable to see the assigned business partners on the Fact Sheet for an Individual object.  I have created the iObject in the portal.  Here, I could not assign any BP's during the creation as the system does not have this option.  I then went ahead and created an Installed Base and assigned this iobject to it in the CRM system in transaction [IB51] "Create Installed Base".  I then went ahead and assigned the Business Partners to this iObject. 
    The situation is that I can see the assigned Business Partners in the Portal for this iObject/Component for the Installed Base in the "Installed Bases/Components" tab but when i go to the "Fact Sheet for Installed Bases" tab I am unable to see the assigned BP's.
    I haven't been able to find any documentation on it either.  Can someone please help.
    Thanks.

    Hi,
    Did you ever solve this issue? 
    I too am having the same problem and cannot display the factsheet or summary using the 'Go To' button in EP.
    Any help would be much appreciated.
    Regards
    Jo

  • Status used in open and completed transactions in Fact Sheet

    Hi! I would like to confirm the logics used in the fact sheet to display open and completed transactions. I read on the help that for open (for example) transactions, system is using status 'open' and 'in process'. This seems to me like system status. However, when I ran the fact sheet, the control is more at the user status level. So, I need clarification on this. Also, where can I find the status and transaction logics used for the extraction of these transactions (e.g. what transaction types are used)? I could not find the codings in the method GET_REPORT under class CL_CRM_CCKPT_PROCESS_CLOSED for example. Perhaps I have looked in the wrong place?
    Appreciate any help on the above.
    Cheers!
    SF

    No response. Based on what is being debugged, all transactions are taken into account.

Maybe you are looking for