Using FCE HD 3.5:  HDV footage & SDV footage on the same timelime??

I have FCE 3.5 and a DV camera. I am looking at getting a HD camera and want to use both to shoot a project with. Will I be able to upload both HD and SD footage into the same timeline and edit, render, etc. I believe I have read that this is possible with FCE HD 4, but I am not sure about FCE HD 3.5. Any help or info is appreciated - thanks.

OK, so if I am using HD, stick with it? That is good to know because I am doing a documentary and wanted the shots of the people to be very clear...BUT I will be switching to SD stock footage and archive stock as well...sounds like it would be distracting if the HD shots were clean and the stock was even further degraded. Anyone know of a good solution to get around the problem above or why I should not stick with the SD?? Actually, if I filmed in HD what I could and output it all in SD, that would be OK, right...just give me very clean interview shots, but not actually in HD? I am understanding this correctly?

Similar Messages

  • My daughter has an iPod touch using my apple ID, I just purchased an iPhone with the same ID. Is there a way to keep my stuff seperate from her ipod but still share the iTunes account?

    My daughter has an iPod touch using my apple ID, I just purchased an iPhone with the same ID. Is there a way to keep my stuff seperate from her ipod but still share the iTunes account? I was looking through the photo section on my iPhone and found pics my daughter has taken from her iPod. I do not want my pics, emails, etc to show up on her iPod. Is there a way to stop this from happening or do I have to create a different Apple ID for her to use instead?

    If you have iOS 8 on all devices then:
    If under 13 years create a new ID for her by:
    Family Sharing and Apple IDs for kids - Apple Support
    The use family sharing to share apps
    http://www.apple.com/ios/ios8/family-sharing/
    Family purchases and payments - Apple Support
    If underage and not i)S on all devices then you have to create an ID for here under your name and supervise it use:
    Create a NEW account using these instructions so yo do not have to use a credit card.
    Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
      Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    More details of how:
    http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/
    Use the new ID on her iPod but only for:
    Settings>Messages>Send and Receive
    Settings>FaceTime
    Settings>GameCenter
    and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.   
    Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

  • HT1589 Can I use more than 1 device ie iPod and iPhone on the same iTunes account and have different music on them

    Can I use more than 1 device ie iPod and iPhone on the same iTunes account and have different music on them

    Yes. Use the option to sync with selected playlists on the music tab when your devices are connected.
    tt2

  • My macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    That indicates a hardware failure. Read here:
    http://support.apple.com/kb/ts1559
    If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm.

  • Label Printing Using Address Book - How can I Print multiple labels of the same name?

    Label Printing Using Address Book - How can I Print multiple labels of the same name?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • Can I use iTunes 10.7 and iTunes 11.1.3 on the same computer running Windows 7?

    Can I use iTunes 10.7 and iTunes 11.1.3 on the same computer running Windows 7 (64-bit)?

    Yes, but it needs to have at least two copies of Windows installed.
    (94491)

  • HT1539 How can a digital copy be used in a household with multiple apple ids, synced on the same computer?

    How can a digital copy be used in a household with multiple apple ids, synced on the same computer?  I want to put a digital copy on my device, and on my wife's device.
    Please help.

    you're welcome.
    actually, unless you take an extra step, the first opened swf will close.  if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

  • Can i use one JSF component's value for other component in the same page.

    Can i use one JSF component's value for other component in the same page.
    For example
    I have a <h:selectBooleanCheckbox id="myChk"> in my jsf page, i want to access its value for another component like:
    <h:commandButton disabled="#{myChk.checked}" action="myAction" value="myValue" />
    ** "myChk.checked" >> I am just asuming "checked" property is available...

    Bind the checkbox to a UIInput myChk property. Then you can reference this property from the page, e.g.
    <h:selectBooleanCheckbox binding="#{myBean.myChk}" onchange="submit();" />
    <h:commandButton disabled="#{myBean.myChk.value}" action="myAction" value="myValue" />

  • Use GPIP for measure six point by six DMM at the same time

    First Question
    I will use GPIB for measure six point by six DMM at the same time. I will record the data in every mins.Could it avaiable? Is this method not accuray?
    I aslo wanna to run 3 labview programme at the same. time.Each programme is same and use GPIB to measure by 2 DMM and 2 Digital In .Could i do this?

    The first question is easily handled by triggering all instruments at the same time and then querying each in turn for the measured value. You can use eaither a hardware or software trigger (i.e. the gpib GET command). For your second question, are these 3 LabVIEW programs started by a single main program? How you want to run them will make a difference but in any case, the programs will have to have some sort of synchronization mechanism if you want measurements to be taken at the same time or if independent, a blocking mechanism to prevent simultaneous reads and writes. More details on the second question would help.

  • Hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.

    hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.

    Are you sure it's a 3GS? What is the model number?

  • HT204053 how cant i use find me and see all my 3 iphones at the same time

    how can i use find me and see all my 3 iphones at the same time

    I assume you mean Find My iPhone.
    You must have the Find My iPhone service turned on inside each phone (Settings>iCloud).  Then either log into icloud.com and go to the Find My iPhone page to view a map and list of device, or use the Find My iPhone app on any device.
    "at the same time" - no you only view one map (associated with one phone) at a time.  You can't get all three phones on one map.

  • Restored my iphone 5c and now cant activate it. tried to use wifi and i tunes but both things give me the same : We're sorry, we are unable to continue with your activation at this time. pls hep !

    restored my iphone 5c and now cant activate it. tried to use wifi and i tunes but both things give me the same : We're sorry, we are unable to continue with your activation at this time. pls hep !

    Was your phone jailbroken/hacked?

  • My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am un to date on the OS also.

    My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am up to date on the OS 7.1.1. Video and audio is froze on my end, only video freezes on the other end. It doesn't make a difference who makes the call either.

    No, there isn't any setting that you are missing. Have you tried force closing FaceTime, and resetting your iPad?
    In order to close FaceTime, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that does not make a difference, you could try resetting all settings, if you reset all settings you will have to enter all of the device preferences again in the settings app. That takes some time to accomplish, but you will not lose my data, media, apps or anything like that. Settings>General>Reset>Reset all settings.
    If that doesn't help, the next step would be to restore the iOS software. Backup your iPad first, restore the iOS, then restore the backup.
    Use iTunes to restore your iOS device to factory settings

  • I am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?

    i am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?

    Possibly the drive is full
    Possibly the permissions are not set to WRITE permission
    Possibly there has been a "user mistake" and you think you are copying to a drive you have been using for over a year but something has accidentally changed and you're copying to a different location

  • Can you use Time Capsule on a windows and 2 macs at the same time.

    Can you use Time Capsule on a windows and 2 macs at the same time as either a backup for one and a seperate HD drive for two?

    Yes.
    From one viewpoint the Time Capsule is just NAS (Networked Attached Storage) and it supports the file sharing protocols necessary for both Windows and Macs.
    From the viewpoint of the Macs it can also be used by Time Machine for backups.
    As NAS it can be used for storing files, and there are many backup software packages that support NAS on both Windows and Macs.
    In addition from a networking point of view it can serve as a router, wireless access point etc.

Maybe you are looking for

  • Formula for multiple columns in a new table

    Hi, I've been using Numbers '08 for a while, but I've only been using rudimentary formulae such as "SUMIF" and "WEEKDAY." Recently I've been trying to put Numbers to better use. One major problem I've run into while writing a formula is this (I'm sur

  • My whole project isn't playing properly.  All tracks unmuted, only 1 or 2 layers play.

    My whole project isn't playing properly.  All my tracks are unmuted, yet only 1 or 2 layers play. I have 33 tracks going.  Do I have to copy and paste each line individually into a new garageband project and mix it all over again?

  • Reason for rejection in ME28

    Hi all, How can I add an input enabled column where I can type the reason for rejection in the ALV display of ME28. I can add the new field in structure MEREP_OUTTAB_PURCHDOC (via append structure) but how can I make it input enabled? Regards, Steph

  • Reformated external hard disk still shows files and folders

    Hello. I recently bought an external hard drive, which I'm connecting by eSATA through the ExpressCard slot in my (now last-generation) 15-inch MBP, late 2008. I began getting disk errors and disk utility told me to reformat the drive. I reformatted

  • IPhoto Quits when emptying trash?

    I have recently updated computers and when I imported (I think through the assistant) I ended up with literally like 10 times the number of pics I should have. After deleting about 58,000 of them by hand, I can not get the iphoto trash to empty, iPho