Using FCP 7 - Can I connect two more displays to the new 27" iMac and have one as a display monitor?

I use Final Cut Pro 7 right now and am thinking about buying the new 27" iMac with the NVIDIA GeForce GTX 780M 4GB GDDR5 card. I have a 24" Apple Cinema Display with mini Display port cable. I also have one more Samsung display with DVI & HDMI. Can I connect both monitors to the iMac and be able to use one in FCP as a display monitor?

Hello,
Maybe a device like the Targus USB 3.0 SuperSpeed Dual Video Adapter or StarTech USB 3.0 to HDMI an DVI Dual Monitor External Video Card Adapter would work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist

Do you have the old for new service? Can I upgrade my iPhone 5s to the new iPhone 6 and how much does it cost?

Do you have the old for new service? Can I upgrade my iPhone 5s to the new iPhone 6 and how much does it cost?

Actually, in the US at least the website states
You can recycle your iPhone at the Apple Retail Store and get immediate credit for its value toward the purchase of a new one.**
from
http://www.apple.com/retail/iphone/
my 5S showed a top value of $305 allowance

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

Can I run two separate versions of the LabVIEW Run-Time Engine on one PC?

Hello, I am curious if anyone knew if it is possibly to install and use two separate versions of the LabVIEW Run-Time Engine on one PC? I currently have the 2009 Run-Time Engine installed on one machine and wanted to install the 2011 Run-Time Engine as well. I know that you can run two separate versions of the LabVIEW program on one machine, but what about the Run-Time Engine?
Thanks!
Solved!
Go to Solution.

I'm guessing this is a bug that NI needs to fix. I see no reason you shouldn't be able to install the run-time engine of an older version. I'd be interesed in if it allows you to install the older development environment, which also includes the older run-time engine. There are some command line switches for NI installers as mentioned here:
http://digital.ni.com/public.nsf/allkb/C361087EE9F20810862577850073128E
I wonder if there is a force install option.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

I can't connect my canon mp160 to my new apple iMac desktop. It just won't print although it comes up as the printer. there is no driver for this from canon who states that I probably don't need a driver for this

I can't connect my canon xp160 to my new IMAC. It does recognize it but won't print. there is no driver for this as per Canon and they state that I may not need one. thanks!1

If you want to print, then you will need a printer driver. There is no printer driver available from Apple for the MP160. And the last driver that Canon released for this model was for OS X 10.7. You may be able to install this 10.7 driver, although it is not digitally signed so Gatekeeper will block the installation. To get past Gatekeeper, you can hold down the Control key and click on the installer. A pop-up menu will appear. Select Open. You will then be given the option to install the old driver.
With the driver installed, add the printer via Printers & Scanners and see if you can print.

Can't connect my Panasonic NV-EX3 to new intel imac iMovie

I have an older mini DV camcorder with a i.Link (Sony's version of Firewire). It looks as though this should be fully compatible but I can't connect. It can't find the camera at all. Are there any special settings I should be using on the imac or on iMovie?
Thanks
Matt

I can understand your total frustration. But not all cameras work w/ iMovie6 (even if they once worked in the past). Seems to me that apple focuses on the latest products first (or at least tries to) and when they have time they update compatibility later for older products (depending on popularity /usage of the product). Might be a marketing approach ... I'm not sure. But I know I've run into this situation many times in the past with a small media converter box sony once made (but is no longer manufactured by sony) called a DA1 (analog to FW media converter box) ... The newer version is/was a sony DA2 which had Lanc control as well (also no longer manufactured).
The only thing I can think of that may work is the following work around:
1. Import your footage into iM4 (assuming you have it on your system already).
2. Rename the iMovie 4 folder so it doesn't get updated to the latest version.
3. Now install iM6 separately.
4. Now open the iM4 project from within iM6. The project will get updated automatically. Once you do this you won't be able to go backwards with this project but you will be able to use the magic movie option in iMovie 6....
Hope this answers your question
SDMacuser

Can a genuine Apple European cord for the new Mac Pro and the Thunderbolt display be ordered from Apple?

The title says it all. When I move to Europe I know I can use adapter plugs, but I would feel more secure, considering the cost of my Apple equipment, using Apple European power cords.
So, is it possible to order these parts from Apple?

The computer-end will be a fairly standard IEC-13 plug:
http://en.wikipedia.org/wiki/IEC_cord#C13.2FC14_coupler

What happen on my 4GS screen display.all the app are diappear and have the background of the LED light inside the screen.can't see anything just only the line black and blue light

I JUST HAD A PROBLEM WITH MY IPHONE "4GS".THE SCREEN DISPLAY ARE BLANK.ALL THE APP ITS GONE.JUST HAVE ONLY "BLACK AND BLUE LINE"INSIDE THE SCREEN.ALL THE PHONE FUNCTION STILL ABLE TO RECIVED THE CALL BUT UNABLE TO MAKE PHONE CALL BECAUSE THE TAP ICON ARE GONE.

Not sure what the origin of the problem is, but you should try deleting iDVD's preference files.
First, close iDVD and go to your Home(YourUserName)/Library/Preferences/com.apple.idvd.plist
Drag this plist file to the trash. iDVD will automatically create a new fresh one when you reopen it.
Open iDVD.
See if the main screen is now visible.
Post back if that did not help.

HT2497 can you connect AirPort Extreme to a Mi-Fi unit? currently have one from 3 uk. It's a Huawei E586

hi there, I have an Huawei E586 mi fi unit, can this be used with an Air Port extreme unit in the same way as a router? If so, how do the two units connect?

The AirPort Extreme requires an Ethernet signal at its WAN port.
So, the first question here would be does your Huawei device provide an Ethernet signal that could be sent to the AirPort Extreme?

Can the new Macbook Air and Macbook Pro with retina display that run OS X Lion or Mountain Lion run Windows through bootcamp?

I was just wondering.. since the new macs have omitted the optical disk drives is it still possible to install windows on a mac running OSX Lion and Mountain Lion?

Yes. Read the Boot Camp Install instructions for the MacBook Air which also does not have an optical drive. Put Windows onto a thumb drive or external optical drive and make these bootable. Then follow the instructions for installation from the thumb drive or external optical drive.
http://www.apple.com/support/bootcamp/

How do I record my iPhone screen using the new QuickTime Player and have the sound from my voice and the game?

So I have the updated software or whatever it's called on my MacBook Pro 10.10.2 and I don't know how to record the audio of my gameplay and my voice at the same time. For example: I want to play this game on my phone and the sound is important to have for the video and me to hear. I don't know how to have the gameplay sound for me and the video, and how to record the game sound and my voice? If this makes any sense please help me
tthank you in advance

Please search the forums. This has been covered here extensively.

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

Has anyone used the new 5K imac with AE CC and is it a big improvment speed wise or not?

I am thinking about getting the 5K imac with the i7 4.4 GHz quad-core and AMD Radeon R9 M295X 4GB GDDR5, but my big concern is that the video card is not Nvidia and does not use cuda core.
I currently have a late 2012 imac with the 3.4 Intel Core i7 and a Nvidia GeFroce GTX 680MX 2048 MB and sometimes it is very slow when working with a lot of effects or layers.
1. If you have any experience with the 5K imac, please let me know how you like it?
2. Was Apple going to the AMD video card a good or bad thing?
3. Do you think I would benefit any speed gain with the new 5K imac and by what percentage.

The AMD video card is not a good hardware selection with the current media content creation software. Open CL is still lagging behind CUDA in performance and the CPU's did not change with the new Imac. So basically it's a new Imac with a updated video card and 5K screen. Not something I would suggest for Adobe if you already have an Nvidia solution.
Eric
ADK

The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group). You can use Join command to connect two or more paths, paths in groups; ot to close an open path.

Hi I was trying to join two Ractangle Tool objects but getting this type of Error in illustrator cs6 :-
The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group).
You can use Join command to connect two or more paths, paths in groups; ot to close an open path.
Please assist me asap.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
This sound like a firewall issue. I would start by disabling the firewall and seeing if you can connect. If this works then you know where the problem is,
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Using FCP 7 - Can I connect two more displays to the new 27" iMac and have one as a display monitor?

Similar Messages

Maybe you are looking for