Using filter in selection sets during migration

Hi,
Can I use filter during creation of selection sets to select data related on a specific operating unit only?
If so how to achive that requirement?
Thanks,
Indu.

Yes, it is possible. You can use Financial Operating Unit Level Setup selection set. If you set filter (say OU100) at Operating Unit, then it would extract Inventory Organization, Payable Options, etc under OU100.
Please let me know if you are looking for something else.

Similar Messages

Code groups, codes & selected sets during UD

Dear Friends,
Can I create my own catalog types.
I have created my own catalog types.
1) For Usage Decision (R)
2) For Defets recording (P)
During defect recording the system is picking the code groups & codes created by me and which are assigned . It is not showing other ones.
But during Usage decision it is picking all the code groups, codes & selected sets attached to standard UD catalog "3".
I am unable to understand how the system is behaving like this.
I have created my own notification type Y1. I have created my Catalog profile (YQM000001).
I have assigned this profile to inspection type.
I have assigned this notification type to inspection type.
In the catalog profile YQM000001, I have assigned two catalogs (R & P).
In catalogs & catalog profile for notification type, problems field assigned the catalog type "P".
One more issue while recording the defects I am getting notification type as Y1 (created by me) but the catalog profile is showing standard one "QM0000001".
I am unable to understand these all. Do anybody has got any solution.

Dear Anuradha,
There is no need to create separate catalog type for your problem of displaying specific UD codes while giving user decision. You can assign the specific 'UD selected set' from catalog type 3 ( User decision) in SPRO ' Maintain inspection type' for QM. Following is the path you can assign the desired UD option you need to see while recording UD:
SPRO >> Quality Management >> Quality Inspection >> Inspection lot creation >> Maintain inspection types >>execute >> select the inspection type say '01' and view details >> there will be field UD selected set, assign the specific selected set made for your plant and save.
By doing this when you go for giving any UD, codes defined by you only will be displayed (not all).
Didn't understand your issue related to notification, but in same above screen you can also assign notification type for particular insp. type.
Looking at your requirement there is no need to create separate insp type or notification type just make proper use of existing one and do proper assignment.
Please let me know if you have any problem in resolving this.
Best Regards,
Shekhar

Data Pump using 11g2 and 11g1 question during migration

Our DBE put our test database on 11g2 and our production on 11g1. Due to some ingest failure we wanted to move the data in test(11g2) to production(11g1) using data pump, however I was told that you cannot go from 11g2 to 11g1. I was also told that because the database contained public synonyms that I would have to recreate all public synonyms. he said it had something to do with lbascys. Can someone clarify this for me..

user11171364 wrote:
... Can I still use these parameters during the import ONLY without having used them during the export.Nope, read the restriction : during the import "+This parameter is valid only when the NETWORK_LINK parameter is also specified.+"
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_import.htm#sthref299
Consequently, you cannot use it within your dumpfile.
Nicolas.

JBO-26041 error when creating a selection set

11.5.10.2 with AZ.H Delta 2
Trying to create a selection set for "Discrete Mfg. and Distribution Setups" using a filter on Inventory org and I get this error
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Insert": SQL Statement " INSERT INTO AZ_SELECTION_SET_ENTITIES_B(REF_ENTITY_OCCURANCE_CODE,UPDATABLE_FLAG,ALLOW_SET_TARGETVAL_FLAG,ALLOW_FILTER_FLAG,CREATED_BY,CREATION_DATE,LAST_UPDATED_BY,LAST_UPDATE_DATE,LAST_UPDATE_LOGIN,CHANGE_UPDATABLE_FLAG,ENTITY_CODE,FILTERING_PARAMETERS,ENTITY_OCCURANCE_CODE,USER_ID,SELECTION_SET_CODE,SEQ_NUM,SELECTION_FLAG,FILTER_SET_FLAG) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)".; ................
<snip>
## Detail 0 ## java.sql.SQLException: Data size bigger than max size for this type: 4220 at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134 ............
<snip>
If I do not select a filter, the selection set gets created successfully. Seems to me that the issue is related to data. Is there a limitation on the length of a certian field in the selection set ?
Any help is appreciated - we are also creating an SR
Thanks
Srini

Roopesh,
Thanks for your support. Understood your point - I logged into the target instance and then tried to create a selection set using the Source instance and got the same error (and it can be reproduced at will on both source and target instances). The set will save successfully if I do not enter any criteria.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Insert": SQL Statement " INSERT INTO AZ_SELECTION_SET_ENTITIES_B(REF_ENTITY_OCCURANCE_CODE,UPDATABLE_FLAG,ALLOW_SET_TARGETVAL_FLAG,ALLOW_FILTER_FLAG,CREATED_BY,CREATION_DATE,LAST_UPDATED_BY,LAST_UPDATE_DATE,LAST_UPDATE_LOGIN,CHANGE_UPDATABLE_FLAG,ENTITY_CODE,FILTERING_PARAMETERS,ENTITY_OCCURANCE_CODE,USER_ID,SELECTION_SET_CODE,SEQ_NUM,SELECTION_FLAG,FILTER_SET_FLAG) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)".; at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891) at
<snip>
## Detail 0 ## java.sql.SQLException: Data size bigger than max size for this type: 4282 at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179) at oracle.jdbc.ttc7.TTCItem.setArrayData(TTCItem.java:155
<snip>
Thanks
Srini

Query Def. Filter Value Selection

Hello,
We upgraded our BW Dev application from 3.0(b) to 3.5
When I go into Bex Query Designer and I want to see the values for my InfoObject: 0FISCPER, I see old values
Low Value: Period 15 2001 02/015/2001
High Value: Period 16 2005 02/016/2005
I am used to seeing 'Only values in InfoProvider'
I can get those values to display when I click 'Display other Values' and then check the box for 'Only Values in InfoProvider', But that should be the default, since in my InfoObject I have the Parameter: Query Def. Filter Value Selection set to 'Only values in InfoProvider'
Can some one help me, or am I misunderstanding something here.
This behavior works as expected on our BW 3.0(B) production box that has not yet been upgraded to BW 3.5
Thanks for your help!
Nick

Hello,
i have found a workaround for this issue.
I investigated the underlying tables for the InfoObject "Business Explorer" properties tab.
I found that the fieldname for that data Element in question (Query Def. Filter Value Selection) was RSF4DEFAULT.
I went to SE11 and entered RSF4DEFAULT as the 'Data Type' I then clicked the icon for "Where-Used List", I checked the box for 'Table Fields' and clicked OKay.
It came back with the following tables: RSDCHABAS and RSDDPA.
I went to SE16 and looked at RSDCHABAS for the characteristic (CHABASNM) 0FISCPER on my Development system and compared it to my Production system.
On development I saw we had the 'Active', 'Delivered', and 'Modified' version of the object, so I scrolled to the right to see the F4DEFAULT field value, it listed M, D, D respectively.
I checked out that table on Production and saw it had D, D, D.
So even though in the GUI for the infoObject I was seeing the correct selection, the corresponding base table was wrong. So I set the infoObject to Master data values and activated.
i looked at the underlying table again and it displayed M this time, So I went back to the infoobject and set it back to 'Only values in infoprovider" and activated the object.
Now I went back to teh underlying table and it reflected the value D in F4DEFAULT for the Active version.
When I went back to Query designer the default filter worked as expected!
So that is the work around. How the GUI became inconsistent with the DB tables is another question.
Nick

Selected Set

Dear All
I have assigned selected set code goups and codes on SPRO but in Usage Decision its not getting reflected...why is this?
I can in IMG but its not at all appearing in QA11
Please help...

Dear,
Spro> Quality management>Quality inspection >inspection lot creation-->maintain inspection type -
>select ur inspection type and display it . under inspection lot processing tab u will find UD selected set.
Now go to QS52-----> select catolog 03 --->select assigned selected set and view .
Use these assigned selected set while UD
Regards,
R.Brahmankar

Accessing WS data set during selection screen processing in BG processing

Hello ABAPers,
I am attempting to access a working storage table variable that is set during selection screen processing after the user submits the program to background processing (using F9).
I have tried using export to memory id in the at selection screen section and then import from memory id in the start-of-selection section, but it does not seem to work all of the time. Is there a better way of doing this?
Thanks

bump

Data transfer of Selected sets (QS51) using Function modules

Hi All,
I am doing data migration of Selected sets (TCODE QS51) using function module. I have tried using BDC recording but it is not working in background.In foreground it is giving information error on second screen as field RQSKT-AUSWAHLMGE is not present on screen 1000.. In foreground I am pressing enter after this error its working fine but in background the execution stops there. So I am trying function modules QPAM_SELSET_CODE_CREATE and QPAM_SELECTED_SET_CREATE
The fields in template I have are KATALOGART(Catalog), WERKS(Plant),AUSWAHLMGE(Selected set) ,KTX01(short text), STATUS(status),CODEGRUPPE(code group), CODE (code), KURZTEXT (short text for codegroup),BEWERTUNG(Valuation code), FEHLKLASSE(Defect class)
QPAM_SELSET_CODE_CREATE contains fields KATALOGART, WERKS,AUSWAHLMGE ,CODEGRUPPE,CODE which I need and While stand alone testing of this function module I am geting error as follows with the data filled :
Runtime:        6.496 Microseconds
Exception       WRONG_KEY
Message ID:          QS                         Message number:           299
Message:
No entries were found in catalog 1
MAN WERK K AUSWAHLM CODEGRUP CODE
300 WI10 1 DDTEST   THREADS 1
QPAM_SELECTED_SET_CREATE contains KATALOGART , WERKS,AUSWAHLMGE , KTX01 which I need and it requires Language key fiels KSP01. I specified it it executes successfully but in transaction it is not there. some FMs contain some fields and not all fields so I want to know which one to use ? Can anyone give me sample code how to use these FMs?

Note 381286 - Code grps + selectd sets:Transport request requestd
Note 592418 - Composite SAP note: Transport of code groups and codes
But I do not recommend a modification because the system does not generate request for that in the production system.
This means you can maintain catalog directly without transport in the production system.
Only development or test system ask you a request number.
Regards
Luke

What is USING SELECTION-SET in submit statement?

hi,
any body can tel me.
SUBMIT rptedt00
                  USING SELECTION-SET 'HRESS_TEDT00'
                  WITH pnppernr-low EQ i_pernr
                  WITH pnptimr6     EQ 'X'
                  WITH pnpbegda     EQ i_begda
                  WITH pnpendda     EQ i_endda
                  TO SAP-SPOOL
                  SPOOL PARAMETERS ls_params
                  WITHOUT SPOOL DYNPRO
                  AND RETURN.
here use of USING SELECTION-SET and which name we have to specify in quotes.
Regards,
Shankar.

Hi
USING SELECTION-SET <var>
This addition tells the system to start the called program with the variant var
You specify the variant in the quotes.
Check the below links
http://help.sap.com/saphelp_nw04s/helpdata/en/9f/dba51a35c111d1829f0000e829fbfe/frameset.htm
regarding calling another program from current report
Hope this helps
Regards
Shilpa

How to use selection-set in submit report

Hi ,
How to use,
submit report via selection-screen
                                     using selection-set 'ABC' .
Can somebody pl tell me how to use selection-set 'ABC' in submit report . It would be nice if someone can send me a piece of code.
Regards,
Hardik

Hi,
This is from ABAPDOCU.
SUBMIT REPORT01
       VIA SELECTION-SCREEN
       USING SELECTION-SET 'VARIANT1'
       USING SELECTION-SETS OF PROGRAM 'REPORT00'
       AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00.
You can use f1 help also.

How to use SELECTION-SET with FREE-SELECTIONS?

Hi,
how to use SELECTION-SET with FREE-SELECTIONS?
Regards,
Vinay.

Check http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm

Can not use 'AT LINE-SELECTION' with SET PF-STATUS

Hi experts,
my code is like below:
PARAMATERS: .....
SET PF-STATUS 'st_nam'.
Perform Load_data . ' For list display
START-OF-SELECTION.
AT LINE-SELECTION.
Perform list_detail.
AT USER-COMMAND.
CALL SCREEN '1001'.
END-OF-SELECTION.
When I execute the report , the basic was displayed , but when then i double click on the list to call the next screen '1001'. It did not work , but if i omit the SET PF-STATUS m AT LINE-SELECTION worked week , so in this case what has happened i how can i solve this problem,
Thaks,
PS: Reward immediately

Hi,
Thank you very much for your helpful answers, I have copied the report downto my system and test it , When i used SET PF-STATUS , i can not use AT LINE-SELECTION to capture events ...May be we can not use these 2 statements in parallel,...:D
Thanks,

In interactive how to use AT LINE-SELECTION WITH SET PF-STATUS

Hi all,
I am developing an interactive report in which i am using gui status (pf-status ) for AT USER-COMMAND and AT LINE-SELECTION event .But when i used at line-selection event is not working with pf-status even though i use PICK function code .
plz help me to work with both the event i.e.
AT USER-COMMAND.
AT LINE-SELECTION.
Thanks a lot in Advance .
Regards,
Tarak

hi,
In PBO of Module Pool, Please Write in this way
MODULE status_9001 OUTPUT.
Set the PF-STATUS
SET PF-STATUS '9001'.
To Set the Title of Screen
SET TITLEBAR 'TITLE'.
ENDMODULE
Setting PF status to the (SAP) system default
set pf-status 'BASIC'.
How to check for pf-status
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'ART'.
PERFORM STYR_ARTSKONTI.
WHEN 'PST'.
PERFORM STYR_POSTER.
WHEN 'BIL'.
PERFORM VIS_BILAG.
ENDCASE..

Templates Project Setup and Lease Management Setups don't show up during selection set creation

Hi,
I am new to iSetup.
I have just installed iSetup using the Isetup List Of Mandatory Patches For R12 (Doc ID 811040.1)
I don't find the following templates needed by my users to create selection sets:
- Projects Setup
- Lease Management Setups
Any idea why they don't show up?
Regards,
Jean

It's not a backup restoration.
I'm a newbie, I installed Oracle on my computer. In the installation, Oracle allows to create a database. I didn't change any setting information, excepted set the database's password.
Oracle was successul installed.
The database setup (wizard) failed.
The listener was not created.
When the wizard step run "Creation and starting an Oracle instance", I get ORA-03113.
I don't know the log I sent to you is the good log. I'm not sure. My database name is "Essai1"
Do it is some files that I could send to you?
thanks for your help.
Jimmy

Where Used for Code groups or Selected Sets

Dear all,
can any body plz tell me how can i know which code group or selected set is used in what qualitative MICs.
either any report or transaction...
thanks in advance
zeeshan

Hi Zeeshan,
According to my information,,,
For Code Group
In QS41/42/43/44, reach up to the second screen "Change View: Codes" Overview. And then click on the "Used in Selected Set" Or short key "CntrlShiftF3"
For Selected Set.
I think no such std sap report is available. But what you can do is use the work bench CWBQM in display mode,,,,,
- CWBQM---> select the "Current Working Area" as "Q_OPR_000000000010".
- Apply the Basic Selection or Additional Selection Criteria" and then press Cntrl+F7.
- the list of the MIC data will be available here.
Or
You have to write done a query SQVI
Or
Develop a customized report.
Regards,
Shyamal

Using filter in selection sets during migration

Similar Messages

Maybe you are looking for