Using filter view in combined request.

Hi,
I want to see the filters used in a combined request in a filter view which I am unable to. Can anyone help me with this?
Regards,
Dev.

Dev,
Not possible to use the filter view in union request.Try creating the filters with filter view as a separate request and add them to the dashboard.
Rgds,
Dpka

Similar Messages

Reg Filter View in Combined Request OBIEE11g

Hi,
We have a requirement where we need to show the filter view in a combined request. Currently we have achieved the same but putting another request but the issue when the download of the request happens the filter view is not downloaded and it has to be downloaded separately. We are using OBIEE11g(11.1.1.6.9).
Please advise if there is any workaround to achieve this functionality so that download of results and filter view can be achieved in one shot. Thanks.

Dev,
Not possible to use the filter view in union request.Try creating the filters with filter view as a separate request and add them to the dashboard.
Rgds,
Dpka

Filter view for combined request

Hello!
We have 12 requests combined to the single Answer's request using UNION. Each of these 12 requests has a filter. But when we try to display the filter view for the combined request, it says "Request contains no filters". Any ideas how to display the big "combined" filter?
Thank you!

I am assuming that the columns in each of your 12 individual queries are the same and you just have different combinations of filters to produce your final query. If so, try building this using one query and using the OR operand for each set of criteria that corresponds to the 12 different sets of filters. This way the filters will show up in Filter View.
If the columns in the 12 queries are simply the same datatype (minimum requirement), but different, then how would the user know which filter set corresponds to which set of columns since the "final" query will have one name for each column? It would be confusing at best. The only thing I can think of is having 13 queries, 12 individual ones and the one "combined query."
In your dashboard, display the "combined query" in the Compound Layout view in the usual manner. Underneath that query in the design mode of your dashboard. Add the 12 individual queries but only display the "Filter View" of each query.
With just the combined query, nothing will display in Filter View as you surmised.

Filer view for combine request

Hi ,
can any one help me to get filter views for combined request reports. As normal, when we use filter view with combine request then , it doesn't show us what value we have selected in dashboard prompt. so i need alternate approach, for showing dashboard selection with combined request reports..
Thanks
Deepika

i think creating prompt in sql would not help as i m using exixsting prompt and creting all prompt is not good.. tat too would not help for shwoing like filter view in combined request..
Edited by: Deepika Sinha on Jul 17, 2012 11:12 PM

Hiding part of filter view

Hi All,
I have a report where i have some hard coded filters.
For example:
below are the columns of the report
Quarter, Booking_flag, partner id, Amount
and i have hard coded filter : booking_flag = 'Y'
now when i use filter view, i am getting this booking_flag = 'Y' along with prompt filters on dashboard.
Users dont want to see this booking_flag='Y' filter in the filter view but want to see only filters which are applied in the prompts..
so is there a way to hide this hard coded filter and show all other filters which are applied in prompts in filter view?
thanks in advance...

user8708843 wrote:
Hi All,
I have a report where i have some hard coded filters.
For example:
below are the columns of the report
Quarter, Booking_flag, partner id, Amount
and i have hard coded filter : booking_flag = 'Y'
now when i use filter view, i am getting this booking_flag = 'Y' along with prompt filters on dashboard.
Users dont want to see this booking_flag='Y' filter in the filter view but want to see only filters which are applied in the prompts..
so is there a way to hide this hard coded filter and show all other filters which are applied in prompts in filter view?
thanks in advance...No, but you can group the filters so "hard-coded" filters are all grouped and the prompt filters are grouped, but separately, with the logican operand "AND" between them. This would visually separate the filters and users and focus on the "group" of prompt filters to see what was chosen.
This might be a "happy compromise" for them.

Use of Filter in Direct Database Request for Custom Navigation

Because of union and other complex sql code I am using Direct Database Request. (DDR) In 1st request based on DDR containing column Region, I need to do Region column value navigation to the Target report. The Target report is also based on DDR and has column Region.
For 1st Report Region Column Value Navigation to work
1. I did activate value interaction in 1st Report for Region column and set Target to Report 2.
2. In 2nd Report, I have to use Filter and make region column "Is Prompted". But in DDR the filter is not available. How do I solve this problem?

by using Direct database request your bypassing all the wanderful metadata you built in the BMM layer, as such much functionality is not available.
If you really need to use such complex SQL, I would suggest creating an inline view in the phyiscal layer and at least model this through your BMM either as a flat data source (ie include the dimension columns and model the same inline view into your BMM star)
If you do that, the BI Server will know what other logical columns this data source can relate you and you should find the navigation works as expected.
If you dont fancy that good practice, have a look at creating GOURL formulas as the column fx's, format as HTML to present the data as a hyperlink and manually pass all the parameters to the 2nd report.
I'd do the first option, its more inline with intended use.
What cant you do using the 'normal modelling / answers techniqes with union (see combined request in answers) and complex sql (evaluate function in RPD)??

Error while using a VIEW with a FILTER - 0x80131904

Dear Colleagues,
I've a list and I want to use a view with a filter on a specific field.
[Attribution] is egal to [Me]
My Sharepoint 2013 keeps providing this error when I open the view filtered :
Exception from HRESULT: 0x80131904
Correlation ID:fc8650d8-5f52-4ceb-b819-0f784ec0318f
ULS shows the following :
01/07/2014 17:44:58.41 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://vspar-spfw-01:80/Lists/Conduite%20Changement/Requtes%20Attribues%20%20Moi.aspx) 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.42 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.42 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Temps d’exécution=13,5726747393873 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Database d0d6 High System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Benjamin RIOU' to data type int. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.HasMoreRows() at System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordead... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48* w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Database d0d6 High ...lock) 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation General xxpm High Unable to execute query: Error 0x80131904 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation General 8e2s Medium Unknown SPRequest error occurred. More information: 0x80131904 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Temps d’exécution=12,6535635115636 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a1 High Error while executing web part: Microsoft.SharePoint.SPException: Exception from HRESULT: 0x80131904 ---> System.Runtime.InteropServices.COMException (0x80131904): Exception from HRESULT: 0x80131904 at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListNa... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48* w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a1 High ...me, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) --- End of inner exception stack trace --- at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCal... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48* w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a1 High ...lback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) at Microsoft.SharePoint.SPListItemCollection.EnsureListItemsData() at Microsoft.SharePoint.SPListItemCollection.get_Count() at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteSelect(DataSourceSelectArguments selectArguments, String aggregateString, Boolean wantReturn, BaseXsltListWebPart webpart, SPListItem& listItem, SPListItemCollection& listItems, String[]& fieldList) at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal() at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a2 High InnerException 1: System.Runtime.InteropServices.COMException (0x80131904): Exception from HRESULT: 0x80131904 at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeAr... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.48* w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a2 High ...rayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
01/07/2014 17:44:58.50 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://vspar-spfw-01:80/Lists/Conduite%20Changement/Requtes%20Attribues%20%20Moi.aspx)). Temps d’exécution=95,5520883240747 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
The filtered field is a list of choices with no multiples values.
I'm pretty sure the issue is located here :
01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Database d0d6 High System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Benjamin RIOU' to data type int. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.HasMoreRows() at System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordead... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
What can I do ?
Thanks
Best regards / Ben

Hi Ben,
How did you design the filter on the view?
This error usually occurred when people use SQL T-SQL. Here are two similar posts , please check whether they are useful for you:
http://social.technet.microsoft.com/Forums/en-US/e1ba76f9-855f-4087-91a7-c3e492e59be4/conversion-failed-when-converting-the-nvarchar-value-xxxxxx-to-data-type-int?forum=transactsql
http://social.technet.microsoft.com/Forums/en-US/1d0ab5f9-2ea6-4399-abbf-0c23b456e0f4/conversion-failed-when-converting-the-nvarchar-value-bottle-to-data-type-int?forum=transactsql
Please create a new list, and create a new view, then add a filter on the view, compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Materialized View cannot use filter columns ORA-12033

Hello Forum members,
I am creating the following MV with Can you please advise me??
Thanks
SQL> create materialized view log on his_swi with rowid including new values;
Materialized view log created.
SQL>
SQL> CREATE MATERIALIZED VIEW His_Swi_mv
2 refresh fast with rowid
3 AS
4 select quarter,sum(sw_po),sum(sw_po_fre),
5 sum(sw_por_sta+sw_porunt_swi+sw_por_hb+sw_po_free) as proj from
6 history_switch group by quarter;
his_swi group by quarter
ERROR at line 6:
ORA-12033: cannot use filter columns from materialized view log on
"EM"."HIS_SWI"

Hello Forum members,
Please ignore the above post.
got solution from : http://www.jusungyang.com/DWfolder/MaterializedViews/MVlogFilterColumns.txt
Thanks

Session Variable in filter view error

Hello,
My prompt is defaulted to current 12Weeks. I used session variable in the prompt to capture 12 Weeks (Current Week and Current+12).
so the default value is @{biServer.variables['NQ_SESSION.PERIOD_STDATE']} where PERIOD_STDATE is my session varible.
I am using a filter view to display the filters being applied.
When the user opens a tab, the filter view is throwing error
***The syntax of the expression to be evaluated is invalid.***
***Expression: @{biServer.variables['NQ_SESSION.PERIOD_STDATE']}***
My report is running fine. I just have the date column as prompted in my report request.
When the user hits go button on the prompt then the filter view comes up just fine.
What is that I am doing wrong? Why does the filter view gives result after hitting GO button?
Please help.
thanks,
deep

Hi,
1. Set the default using logical SQL. Select <presentation table>.<presentation column> from <subject area> where <presentation table>.<presentationation column> =valueof(NQ_SESSION.<session variable>)
2. You dont have to write the exact syntax for entering the session variable in the default values. You just need to use the session variable name after selecting the session variable type in the drop down.
Hope this helped/ answered.
Regards
MuRam

How to change the display name in the filter view

Hi,
I have one column "*Year*" and type in case when 1=2 then "product_d"."name" else "calendar_d"."year" end.
I add a filter view for it. but when I select, like 2010, it will display"case when 1=2 then "product_d"."name" else "calendar_d"."year" end" is equal to 2010.
So how can I change it to "Year is equal to 2010"?
Any one have any idea about this?
Regards,
Anne

anne wrote:
Hi David,
About your confuse about"case when 1=2 then "product_d"."name" else "calendar_d"."year" end".
You can try in your locale.
You will find they are different.
BASED ON THAT you have two table product_d and calendar_d AND they are related by one Fact table.
THEN When you type in
"case when 1=2 then "product_d"."name" else "calendar_d"."year" end"
AND
"calendar_d"."year",
IT WILL SHOW U TWO different RESULTS.
I need to show year which its related product is not null. but I cannot use SHOW->SQL RESULTS->TYPE SOME "WHERE..." because I also need to use "constrain"..
That why I choose to use a case when function..
So, do you have any idea about this?
Regards,
AnneWhy not use two filters in your request? Have something like this:
product_d.name IS NOT NULL
AND
calendar.year IS PROMPTED?
...instead of using a CASE statement? This way you can have both filters show the way they should in a meaningful way.

Prompt used as view selector for multiple reports

Hi All,
Can a dashboard prompt be used as View Selector for multiple reports? If yes, please let me know how?
Thanks
Sumita

Hi Sumita,
You can do this with Dashboard prompts, but it's a little tricky. I'll highlight the process below. Keep In mind I assume you have three reports already created and have three views: View 1, View 2 and View 3.
Phase I: The Dashboard Prompt
1. Create a new dashboard prompt.
2. Add any single column to your prompt. It doesn't really matter which one (just make sure nothing is prompted on it to be safe).
3. For the sake of this example, I'll assume we added column: "Test Folder"."Test Field"
4. Make sure your Operator is "is equal to/is in"
5. Make sure the control is "Drop-down List"
6. Change the Show to "SQL Results"
7. Write a SQL statement similar to the following (TEST =<your subject area>, "Test Folder"."Test Field" = <your column>):
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 1' END
FROM TEST
UNION
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 2' END
FROM TEST
UNION
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 3' END
FROM TEST
**Note: The reason why we need to do the CASE statement is because every logical query needs at least 1 presentation column. The case statement is a way to include the presentation column, but since the statement 1=2 is never true, we always use the ELSE condition.
8. Set a presentation variable. Call it VIEW_PVAR
9. Have the Prompt default to Specific Value: View 1
10. Save the Dashboard Prompt and put it into the Dashboard with your reports.
Phase II: Filter Reports
1. Create a new Answer request
2. Bring in your test column twice
3. Change the formula (fx) on the second column to be: '@{VIEW_PVAR}{View 1}'
4. Now add a filter to the presentation variable column
5. Set the operator to "is equal to/is in' and set the value to: View 1
6. Save the Request as "View 1 Filter"
7. Change the value in the filter to: View 2
8. Save the Request as "View 2 Filter"
9. Change the value in the filter to: View 3
10. Save the Request as "View 3 Filter"
Phase III: Guided Navigation
1. Create three sections in your dashboard
2. Rename each section to: View 1, View 2 and View 3 respectively
3. For each of the sections, do the following:
3a. Click on properties
3b. Click on Guided navigation
3c. Set the Guided Navigation to the appropriate Filter report
4. For each of the three sections, do the following:
4a. Add in all three requests
4b. Click on the request properties and select Show and the appropriate view for that section
5. Save your changes to your Dashboard
Good luck and if you found this post useful, please award points!
Best regards,
-Joe

Adobe 9.1.3 and FireFox 3.5.1+ "...can not be used to view PDF files in a Web Browser"

This is the issue but I'm not sure there is a resolution:
Firefox: Version 3.5.1
Adobe: Version 9.1.3
When navigating the web, click a URL that opens a PDF inside the browser and you get an error * "The Adobe Acrobat/Reader that is
running can not be used to view PDF files in a Web Browser". Please exit Adobe Acrobat/Reader and exit your Web Browser and try again". I did read a post that doing a "repair" from the Adobe Reader application should fix this, they also reference a few registry keys to check becuase the post states it's lost the application path to Adobe version X. I don't necessarily buy that "fix" and here are my details below.
In FireFox if you navigate to Tools > Options > Applications > Adobe Acrobat Document
You're given choices:
Always ask: DOES NOT WORK, produces afore mentioned error *
Save File: Works, saves the file to a directory on your PC
Use Adobe Reader 9.1 (defau...: Works, opens your PDF's outside of your web browser
Use Adobe Acrobat (in Firefox): DOES NOT WORK, produces afore mentioned error *
Use other...:
IE seems to just work as expected.
If you open Adobe Reader > Edit > Preferences > Internet > Check "Display PDF in browser" - DOES NOT WORK, produces afore mentioned error *
This would seem to be an Adobe error rather than a FireFox web browser problems since FireFox does seem to know the correct path although I suppose you can't rule out that this is a FireFox problem since 2 out of the 4 PDF open options DON'T WORK.
Any thoughts on this issue would be greatly appreciated.
Other information:
Adobe 8.1.5 works perfectly with FF 3.5.1+ when opening PDF's in the web browser, we also had no problems with previous versions either.
MSI push via Active Directory from Adobe 8.1.5 upgrade to Licensed Distribution I signed up for, Adobe 9.1.3 which was upgraded from 9.1.0, to 9.1.2, to 9.1.3 via an MSP patch.
Operating system: Windows XP SP 2, plenty of RAM, plenty of Drive
IE version this works with the new version of Adobe 9.1.3 is version 7 (7.0.5730.13)
Our FireFox MSI's come from Front Motions website and as far as I know we've never had problems with their MSI's, also tried the new release of FF 3.5.2 from their website.
I think that about covers it. Anyone else experiencing the same problems or have a patch?

After troublshooting this for the entire day today the issue seems to be a MIME problem.
If everything is woking perfectly, in Tools > Options > Applications...
You should see 4 or more things related to Adobe like "Adobe Acrobat Forms Document", etc. If you don't see at least 4 MIME entries either your Adobe installation is hosed or your FF installation is hosed. I haven't figured out which is causing the issue.
What I did was remaster my patches from my original Adobe 9.1.0 MSI with the two updates via the command line in the directories with the source files. On the 9.1.0 original file I first remastered my MST transform with the Adobe MST utility. I then applied my patches.
msiexec /a AcroRead.msi /p AdbeRdrUpd912_all_incr.msp
msiexec /a AcroRead.msi /p AdbeRdrUpd913_all_incr.msp
I then uploaded that to my network share, unlinked my group policy, made a new group policy, added a batch file to delete adobe.com from program file and the desktop on system startup even though my MST was supposed to take care of that - it's not a perfect world is it? :-)
I then reapplied my GPO's for both FireFox 3.5.2 and Adobe 9.1.3, I checked to make sure the MIME extensions were there and they were. You might have to go into your Adobe Preferences and select that open in browser setting depending on what happens or adjust your MIME settings in FireFox's options but it should work.
That's what worked for me. It's possible a few other things I did along the way tweaked it out, in my group policy on the first run I did select to upgrade previous group policies, for the remaster and repush I didn't select any previous GPO's to upgrade.
It's hard to tell what one thing tweaked it out or what combination of things tweaked out the install. I did also reinstall Adobe 8.1.5 and FF 3.0.10 before doing all this since our machines currently have that setup, I'm not sure if that affected it either, it's just hard to tell but I don't think it did simply because I had done that several times in troubleshooting this issue.
If anyone else has more specifics that would be great!

How to use Filter in ActionServlet

hi how do i use filter in my ActionServlet ?
here is a code :
package test;
import java.io.*;
import java.util.*;
import javax.servlet.*;
public class TimeFilter implements Filter {
public void init(FilterConfig config) throws ServletException {
public void doFilter(ServletRequest request, ServletResponse response,
    FilterChain chain) throws IOException, ServletException {
    int hour = Calendar.getInstance().get(Calendar.HOUR_OF_DAY);
    // only service the request between 08:00 and 17:59
    if (hour >= 8 && hour <= 17) {
      chain.doFilter(request, response);
    // for other times, forward the request to someplaceelse
    } else {
      request.getRequestDispatcher("/someplaceelse").forward(request, response);
public void destroy() {
}where do i place it in my ActionServlet to get filtered access ?
My ActionServlet :
import javax.servlet.http.*;
import org.apache.struts.action.*;
import java.io.*;
import java.util.*;
public final class SubmitAction extends Action {
public ActionForward perform(ActionMapping mapping,
      ActionForm form,
      HttpServletRequest request,
      HttpServletResponse response) {
      DynaActionForm SubmitForm = (DynaActionForm) form;
     // blah
    // blah
return (mapping.findForward("success"));
}can ActionServlet use filter ?
How do i use the Filter class in ActionServlet if i want to get filtered Aceess of the website ?

Ok, this is how filters work.
Typically the filter maps to '/*' and your action servlet maps to '/*.do'. So if you request 'login.do', then the filter would first be called. If it's not between 08:00 and 16:59, the request will be passed on to the action servlet, else it would be forwarded to the action servlet.
There's no need to 'integrate' the filter into you action servlet.

How to hide filter view calculations in answers in obiee 11g?

Hi,
I have a requirement to hide the "CASE WHEN" statements which are there in the filter view while viewing the report in Dashboard. User dont want to see the calculation part in filter view instead they just want to see the selected dashboard prompt value. For e.g
case when (column name1('column value1' IN '@{Presentation_var}' ) > 0 AND "Table name"."column name2"='column value2') or (column name1('column value1' IN '@{Presentation_var}' ) > 0 AND "Table name"."column name2"='column value2') then "table name"."column name" end
or
case when 2 statement
and
Case when 3 statement
or Case when 4 statement
therefore user wants only the bold text value(table name"."column name) to be displayed only not the calculation at front end.
I can think of Narrative view but how to do that exactly? Please help.
Thanks..

try this, It seemed to have worked for me..
Below was my case statement
(CASE WHEN '@{var_brand}' = 'Value1' and "Compl"."RecTypeId" IN (5,8,9) THEN 1
WHEN '@{var_brand}' = 'Value2' and "Compl"."RecTypeId" IN (11,12,13) THEN 1
ELSE 0 END)=1
I used it as a column in my analysis with the following formula
(CASE WHEN '@{var_brand}' = 'Value1' and "Compl"."RecTypeId" IN (5,8,9) THEN 1
WHEN '@{var_brand}' = 'Value2' and "Compl"."RecTypeId" IN (11,12,13) THEN 1
ELSE 0 END)
and I made a change to the name of the column in the analysis using custom column headings and put it as "Brand"
and now put a filter on this column and filtered it for for the value 1
and my filters view now shows the column Name "Brand" instead of the Case Statement..
See if this process works for you..

Using a view to join two tables

Thank you in advance for any advice you can lend.
I am using this code in my MySQL db to create a view.
select
    job.id as job_id,
    umr_cost_calculation.plant_name,
    max(umr_cost_calculation.id) as max_id
from
    job,
    umr_cost_calculation
where
    job.id = umr_cost_calculation.job_id
group by job.id , umr_cost_calculation.plant_name
I did this so I can join two tables and pull in the most current cost data for a specific plant. The report will, at times, show the wrong (older) data. I can re-run the report, filter to just the one job and see again the wrong data. When I add the max_id to the report, it display the id and updates the report with the correct data. It appears that the view was stale and by adding the ID to the report this fixed the issue.
1) Is this the best way to make this join? I don't see how Crystal supports a subquery to make a join (this is why I used the view).
2) If I leave the max_id on the report, will this force the view to always update?

Try:
Select
D1.EmpLoginID,
Count(D1.ID),
Count(D1.AlarmCode),
D1.EmpName,
D1.EmpAddress,
D2.Db2Count
FROM DB1.Data D1
LEFT JOIN (SELECT
empLoginID, Count(*) as Db2Count
FROM DB2.ALL_Database
WHERE site = 'Atlanta'
GROUP BY empLoginID
) D2
ON D1.EmpLoginID = D2.EmpLoginID
GROUP BY D1.empLoginID, D1.EmpName, D2.EmpAddress, D2.Db2Count
Order BY D1.empLoginID ASC
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Using filter view in combined request.

Similar Messages

Maybe you are looking for