Using Final Cut Express for video editing without attaching external device

Hello,
I am a newbie to Final Cut Express as well as Mac's in general. I am wanting to use Final Cut Express for video editing of files, but without an attached camera. Is there any way to have Final Cut Express startup without having it prompt for an external A/V device? I just want to do some basic editing and use the chroma key feature. Can anyone help?
Greatly Appreciated,
Knight2000
iMAC   Mac OS X (10.4.9)  

Hi Zak,
Unfortunately, I've tried that and I get into an issue that was addressed in this posting: http://discussions.apple.com/thread.jspa?threadID=836595&tstart=120 where FCE will show the splash screen and then the program doesn't start. I then have to delete FCE preferences and then I will get the Easy Setup dialog box prompt me again for choosing the external device.
I am looking for a way to use FCE for video editing of files that I already have on my computer that I created using iClone software and is in .avi, or .mp4 format. I get FCE to work one time without the external device actually being attached, but then when restarting the program I get the dialog box asking for the external device and if it's not there, the program just closes, and to get it to work again, I have to delete the preference files and go through the process all over again which is time consuming especially when this is at work. If FCE is not the right program, can anyone suggest a good video editing program that doesn't require an external device and is as good or better than FCE?
Thanks again for your help and support,
Knight2000
iMAC   Mac OS X (10.4.9)  

Similar Messages

  • When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

    When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

    Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

  • I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    I am using a macpro 12 core computer
    I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    You can have them both on the same computer as I and many others have done for years.
    Just go ahead and install FCS 3 normally.
    There will be absolutely no problems.

  • Using Final Cut Express for Ipod Touch

    I'm using Final Cut Express to bring a group of MP4 videos together into one video - for viewing on an Ipod Touch G2. Any advise on the best settings to use.
    Appreciate and and all help I can get!
    Dean

    So - I don't need to edit it, simply compile a bunch of videos together. The problem I have with iMovie 09 is that I need to see the list of video files by name. iMovie 09 won't present listings of video files by name, only by thumbnail.
    To be honest - I'd rather use iMovie 09 as it seems to compile my files MUCH faster. I have a MacPro 2.33Mhz with 8 GB Ram, and a 24 hour video is taking up to 24 hours to compile.

  • I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

    I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

    Hello Karen,
    If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders.  Look especially for the AVCHD logo and specific mention of AVCHD in the specs.  Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
    Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
    Most everything you are going to find on the market today is HD, which stands for "high-def".
    Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

  • I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it.

    I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it. Thanks, stevefromnorthfreo

    Try outputting it as a MP4 or M4V
    If Final Cut won't output it, Mpegstreamclip will convert it. So will Quicktime if you have the pro version.

  • Pro discount for Creative Cloud if I am using Final Cut Express currently?

    Can I get the Pro discount for Creative Cloud if I am using Final Cut Express currently?

    Hi Allvideo,
    I was looking at the promo here:
    http://www.adobe.com/products/premiere/switch.html
    I also looked over the terms and conditions here:
    http://www.adobe.com/store/en_us/popup/offer/save30_cs6_prodprem.html
    It appears that it only applies to Final Cut Pro not Express, sorry
    -Dave

  • Exporting to FLV Using Final Cut Express

    I am using Final Cut Express 4.0 to edit my full HD film footage (29.97fps 1920x1080HD). The final film will be uploaded to my website for viewing. I will be hosting my own videos and using my own player. I need to get the videos to .flv format for easy web viewing. Unfortunately, I have learned the hard way that FCE doesn't export to FLV nor does it predict your export file size. What a shame! My videos are 7.5 minutes long, so the files are large. Currently, I am using a two 3rd party free video converters. The first provides me more flexibility in compressing my video using H.264. I reduce the resolution to 1280x720HD for a reduced file size. Next, I use the other converter to take the compressed file and convert it to FLV. This is where the video becomes unbearable. I received better conversions when I uploaded to YouTube and allowed them to do it. The purpose for me trying to compress and encode the videos myself was to improve the quality of my videos on the web. Feedback I have received was that my free encoders aren't good. It has been suggested to me that I purchase Adobe Flash CS4 to convert to FLV. My problem is I don't want to spend $700 to convert a video. Do I have any other viable options?

    Jason Castellani wrote:
    I am using Final Cut Express 4.0 .. 29.97fps 1920x1080HD .. 7.5 minutes long .. using a two 3rd party free video converters. The first provides me more flexibility in compressing my video using H.264. I reduce the resolution to 1280x720HD .. use the other converter to take the compressed file and convert it to FLV. ..
    no need for converter #1, .. the zillions of options in FCE's 'Export using QT'-dialog allow same settings..
    450sec of 720/30fps material will create STILL huge files .. the point for setting the 'quality' is the socalled bitrate; e.g. famous tool VisualHub (not avail anymore) allowed a manual setting, to find a mix of size vs. pic quality. .. check your converter tool, where and how to set the bitrate. but: the better, the bigger ..
    I dare to say, even the mentioned elaborated tools don't do wonders.
    consider downsampling the framerate by half to 15 (in the 'Size' dialog on Export from within FCE).
    consider an even smaller res 960x540 ..
    don't forget to de-interlace for web-deilivery (reduces file size a lil'..)
    downsize audio sampling rate to 22kHz.. mono .. saves a few MB ..

  • Do I need a blu ray burner to burn HD using Final Cut Express?

    I just wanted to ask a question. I am new to burning after editing is complete. I am using Final Cut Express and have recorded my footage in HD. After trying to burn a disc using IDVD I realized it does not burn HD. So to be clear, in order for me to burn my HD finished sequences and have them be HD I need to purchase a blu-ray player?....also everyone keeps talking about Toast, what is this and do I need it to burn HD. Any advice would be much appreciated.
    Thank

    ANY DVD player cannot play HD content no matter what media it is on. HD content needs HD decoder and other circuitry and S/W which is not present on standard DVD player, just like standard definition TV cannot play HD programing. HD content has to be down converted with application such as iDVD to play on ANY DVD player, at which time it is no longer HD of course. In order to play high definition disc, you'll need HD content on HD media, blu-ray player and HDTV.
    Message was edited by: ComPH1

  • My current os x is 10.9.5, using final cut express vers. 4.0.1.  I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

    My current os x is 10.9.5, using final cut express vers. 4.0.1.  I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project.  After doing this I took selected clips and put those edited clips on the fce timeline.  When playing the video back in the fce timeline,I noticed
    1) the video wasn't playing back smoothly like the original content
    2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio.  I exported to quicktime just to see if that was consistent, it was.
    When I play the converted quicktime content independently of fce,  it plays normally (no sputtering of timecode, video and audio.  Need help to resolve the sputtering playback of converted video content in the fce timeline.  I've never experienced this before.  Any suggestions?

    When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly?  If not, go back and convert the original files again, using the intended Sequence settings as a guide.
    -DH

  • Backup AVCHD Camcorder using Final Cut Express

    I have previously used Final Cut Express to create a backup copy of all the video on my AVCHD Hard Drive Camcorder. However, since that time, I had to reinstall Final Cut Express. I can no longer remember or find how to do this again. Can someone please help? Did apple remove this functionality?

    I just purchased FCE 4 with a new iMac but haven't used it yet. But I do know that iMovie '09 has an Archive feature that will do what you are looking for. It copies the contents of the camera in it's original Full HD format to the hard drive. I do this then import the video to iMovie using the compressed file type. With the original on the hard drive, you can always re-import to iMovie '09 (and FCE 4, I presume) if you want to use the Full HD original format at a later date.
    Santiago

  • I am using final cut express. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the tran

    I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
    Is there some glitch in final cut express that only allows short clips to be transferred in full?

    Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
    By the way, the other reply I received suggested the following:
    In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
    I did this and it was already unchecked. So this is not the answer...
    The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min)  the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
    I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
    ANSWERS
    how you are ingesting the files
    From external flash drive connected directly to mac using FCE.
    the format of the source footage
    digital via ext flash memory. Frame size :1929X1080 / 25fps
    what camera shot the footage
    SONY HXR NX5
    how you are connecting to the computer
    from flash memory directly via usb
    what version of FCE you are using
    4
    what OS your computer is running
    10.6.8
    what model Mac
    macbook Pro intel Core i7
    what drive you are using for Capture Scratch
    3TB external drive (plenty of room left)

  • WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK

    WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?

    hey there DavoMrMac,
    according to Apple's 'site:
    System Requirements
    Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
    512MB RAM
    Display with 1024-by-768 (or higher) resolution
    An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
    Mac OS X 10.4.6 or later
    QuickTime 7.0.4 or later
    HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
    500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
    DVD drive for software installation
    i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together.

  • Can I use Final Cut Express 4.0.1. to import movies from Panasonic VDR-D250?

    Can I use Final Cut Express 4.0.1. to import movies from Panasonic VDR-D250 via USB 2.0? How? (page in handbook?)
    Further specifications of this older camera:
    USB 2.0
    DVD-RAM (cannot be inserted in my MBP!)
    50-PAL (signal)
    MPEG2
    Dolby Digital
    I want to use FCE if possible but maybe could try to install the software of this camera on Windows virtual XP also on my MBP?

    I forward an answer of Panasonic (written in German):
    So Panasonic does not offer a software which is compatible with Apple!
    Bezug nehmend auf Ihre Anfrage teilen wir Ihnen mit, dass der Camcorder
    VDR-D250 die Videoaufnahmen nach dem DVD-Videostandard sowie nach dem
    DVD-VR-Standard aufnehmen kann. Wir können jedoch nicht beurteilen ob Ihre
    Software Final Cut Express 4.0.1 die Bearbeitung dieser Standards
    unterstützt. Seitens Panasonic wird weder eine Apple kompatible software
    noch Support für Apple Geräte angeboten. Wenden Sie sich diesbezüglich
    bitte an Ihren Apple Händler oder Ihren Computeradministrator. Die
    mitgelieferte Software des Camcorders ist ausschließlich für folgende
    Betriebssysteme vorgesehen:
    - Microsoft Windows 2000 Professional
    - Microsoft Windows XP Home Edition
    - Microsoft Windows XP Professional
    Ob diese Software in einer virtuellen Umgebung genutzt werden kann ist uns
    nicht bekannt. Um die mit dem Camcorder aufgenommenen DVDs an einem
    Computer-Laufwerk auslesen zu können müssen diese vorab mit dem Camcorder
    finalisiert werden. Ausnahme ist die Verwendung einer DVD-RAM.

  • Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX.  Just to the dock as would th yellow -sign. As you gather I am new to this program having only used Final Cut Express 4

    Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX.  Just to the dock as would the yellow -sign.  I am new to this program having only used Final Cut Express 4 previously.
    iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
    Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial version 

    Check System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.

Maybe you are looking for

  • Text overflown is not getting printed in the next page in ADOBE

    Hi Experts, I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while pr

  • Disable Drill options only for one dimension of  Web Analysis report

    Hi, Please help me on below issue. I created a web analysis report with 3 dimensions Accounts, MRC and Measure. I have to disable drill down and drill up options only for Measure. Accounts and MRC should be drillable where as Measure should show the

  • Photomerge  Adobe Photoshop Elements 7.0 (Editor) has stopped working

    When starting photomerge I'm getting the above error message. I un installed PSE 7.0 and re installed. Same problem. Any ideas what could cause this problem. Only change I saw was that Google Chrome was installed.

  • Booting up a windows install

    I tried to install windows 7 with boot camp but got no luck. I get asked to press any key but no key will work! Tried an aly keyboard and also normal windows keyboard. Neither of them seem to work at the caps lock light deosnt come on. So, I installe

  • Weblogic 7.0 javax.ejb.EJBObject

    I am running client side program using weblogic 7.0 and getting an error: Exception in thread "main" java.lang.NoClassDefFoundError: javax/ejb/EJBObject It should be something missing in my CLASSPATH Please help ! Thanks