Using Final !!!

In a method I declared JList to final and I want to use final declared list in another method how can it be done because I need to use the method in Switch cases please help me out as I am new to java,hints required please
thanking you,
with regards

The "final" declaration is for inheritance (making a subclass). You can freely instantiate a final class unless it is declared "private" (or "protected" from other packages).

Similar Messages

  • How to use Final Cut Pro with multiple user accounts?

    Hi,
    I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
    Also, I want my DropBox account to back-up my media. Any tips?

    I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
    But I agree on your comment about DropBox. It would have been the perfect solution though.
    What else is there?
    I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk.

  • Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

    Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
    I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
    When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
    Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
    https://discussions.apple.com/message/12073794#12073794
    I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc.  Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
    My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted. 
    To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export.  My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
    To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
    I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
    Example A
    Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all. 
    Example B
    Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
    Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
    Example C
    Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
    Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
    Example D
    Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded.  This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
    It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e.,  13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
    However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
    Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena.  Did I misuse Compressor?  I think the sample video exported as a self contained QT movie was the right thing to do?  Not sure where I went wrong.
    Thanks in advance for Feedback and Recommendations.  For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
    BoBo

    Thank You, Brad, for responding;  glad to hear I'm not the only one having similar Compressor issues.  
    You may have hit on something.  Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts?  And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
    I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
    What version of Toast do you have?  Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music.  I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
    Thanks,
    BoBo

  • I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

    I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

    Yes.  A couple of ways that might work.
    First Way
    What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence.  Does it display correctionly? 
    OK, select the clip in the hd timeline and copy (command-c).  Now go to the HD sequence with the material that's distorted.  Select all (command-a) and paste attributes (option-v) and choose basic motion and distort.  That should maek things work.  What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence.  That I'm pretty sure you'll have to redo.
    Second Way. 
    Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline.  You then should be able to reconnect these clips with your original HD media.

  • I have been using Final Cut pro v6 without any problems but recently had to reinstall.  Since then I can't open and view all my Quicktime clips.  They appear white in timeline which means you can hear audio but not view picture.  Any tips?

    I have been using Final Cut Pro without any problems - v6 - for ages.  I recently had a hardware issue and had to reinstall the software.  Since then I can't open most of my QT clips in my fcp project.  They appear as white clips - audio only no pictures.  There are a few QT clips you can view as regular thumbnail images and they play ok.  What's the issue?  I have fcp v6.0.6 and QT v7.  Any thoughts on what to do next?

    Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7.  That's as far as updates have taken me although i have requested daily updates.  I forgot to say the clips don't play in QT view either.  Again sound but no pictures when they are played.

  • How to use Final Cut Pro

    How do you use Final Cut Pro which I might start using on my Mac Mini

    Step 1: Read through the manual/help files. Pay particular attention to system requirements and set up.
    Step 2: Install the application.
    Step 3: Do some tutorials.
    Step 4: Refer to the manual/help files when you run into questions while working on the tutorials.
    Step 5: Capture or import footage into your first real project.
    Step 6: Use what you learned from the manual/help files and tutorials to edit your video.
    -DH

  • How to use Final Cut pro with external hard drive?

    I have too little space on my computer so I have to use final cut pro x with an external hard drive, but whenever I have the hard drive plugged in and Final cut going, my computer goes very slow. I just upgraded to 16gb ram... but can't seem to run FCP x while an external hard drive is plugged in. FCP just freezes up and I have to force quit.

    craigbuckley wrote:
    all the files and events in final cut are still on my internal, so my internal drive is still full.... Do I have to go and delete everything off my internal?
    In addition to the excellent advice to keep your media on an external HDD, you need to make sure that your system (boot) drive has a decent amount of free space if you want to have a satisfactory editing experience. Many people recommend not going below 20% free space. That's especially so for the boot drive, but as you fill up the external, its performance will also slow. Ideally, we would have separate media and backup drives,
    You don't need to "delete everything". Rather, you first figure out what needs to be moved. You copy those files to the other drive and then verify that all the files you copied are in two locations. At that point you can delete those files from your boot drive.
    Good luck.
    Russ

  • General Overview on How to use Final Cut Studio to create a Blu-Ray DVD

    I am a new user of Final Cut Studio and need an experienced user to give my a progression guide on how to create a Blu-Ray DVD of my recent Alaska Trip. Last month I spend 8 days in Alaska visiting Denali and Juneau primarily. During that time I took about 100 short video clips (HD 1080p) and 570+ still photos with my Canon 7D. I have experimented with some pieces of the software and have created a Blu-Ray disk using Final Cut Pro and Compressor. However my goal is to create this DVD with menus that will play short clips (some narrated) and still photos(also some narration). I did a short one in DVD Studio Pro this morning but need some general guidance on what progression and programs to use to create this project. I was not able to take my video from the Studio Pro Sequence I created for my 1st DVD I had to take the original clips which were processed using Apple ProRes 422 and copy them in one at a time and then find the audio (on the voice overs) I created and also place them into DVD Studio Pro one at a time. I obviously need some guidance on the proper progression.
    Any help would be greatly appreciated.

    Here's the situation...
    DVD Studio Pro will not do the trick for you - it doesn't do blu-ray discs. If you want to do Blu-ray you've got to use either Final Cut Pro's "Export" command or Compressor's "Burn Blu-ray disc" template. The downside to both of these approaches is that you can't burn more than one title (or movie, etc.) using Final Cut Studio.
    To do what you want to do, you need Toast (at least). Toast will auto-generate menus but will let you put more than one title per slide (so you can put multiple slideshows on the same disc).
    If you want to do full-on customizing of menus and multi-level menus, for that you need Adobe's Encore.
    My suggestion - Get Toast. Encore is close to $800.
    Here's your progression (at least the one I use).
    Edit in Final Cut Pro (ProRes 422 is fine, ProRes 422 LT would do the trick as well)
    Export as QuickTime movies (original settings)
    In Compressor using the H.264 for Blu-ray setting and Dolby Digital setting and create elementary streams for video (.264 file) and audio (.ac3). Make sure these files have identical names except for the extension.
    Using toast, add the video file to the Toast project and it'll find the audio file.
    Burn away!

  • WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK

    WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?

    hey there DavoMrMac,
    according to Apple's 'site:
    System Requirements
    Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
    512MB RAM
    Display with 1024-by-768 (or higher) resolution
    An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
    Mac OS X 10.4.6 or later
    QuickTime 7.0.4 or later
    HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
    500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
    DVD drive for software installation
    i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together.

  • Do I need a blu ray burner to burn HD using Final Cut Express?

    I just wanted to ask a question. I am new to burning after editing is complete. I am using Final Cut Express and have recorded my footage in HD. After trying to burn a disc using IDVD I realized it does not burn HD. So to be clear, in order for me to burn my HD finished sequences and have them be HD I need to purchase a blu-ray player?....also everyone keeps talking about Toast, what is this and do I need it to burn HD. Any advice would be much appreciated.
    Thank

    ANY DVD player cannot play HD content no matter what media it is on. HD content needs HD decoder and other circuitry and S/W which is not present on standard DVD player, just like standard definition TV cannot play HD programing. HD content has to be down converted with application such as iDVD to play on ANY DVD player, at which time it is no longer HD of course. In order to play high definition disc, you'll need HD content on HD media, blu-ray player and HDTV.
    Message was edited by: ComPH1

  • I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

    I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

    It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
      I would try to find a copy of Final Cut Express perhaps.
      Does this answer your question?

  • My current os x is 10.9.5, using final cut express vers. 4.0.1.  I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

    My current os x is 10.9.5, using final cut express vers. 4.0.1.  I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project.  After doing this I took selected clips and put those edited clips on the fce timeline.  When playing the video back in the fce timeline,I noticed
    1) the video wasn't playing back smoothly like the original content
    2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio.  I exported to quicktime just to see if that was consistent, it was.
    When I play the converted quicktime content independently of fce,  it plays normally (no sputtering of timecode, video and audio.  Need help to resolve the sputtering playback of converted video content in the fce timeline.  I've never experienced this before.  Any suggestions?

    When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly?  If not, go back and convert the original files again, using the intended Sequence settings as a guide.
    -DH

  • I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

    I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

    As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

  • Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

    I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
    I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

    David S. wrote:
    And yes you can author single track 1080p blu ray discs with Compressor 3.5.
    But that's not what the OP asked, "using FCP alone."
    Why not use Adobe Premier Pro for editing and Encore for burning?
    Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
    There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
    bogiesan

  • How do you mark a section from the timeline to send to Compressor 4 using Final Cut Pro X?

    I am trying to send just a certain piece from the Timeline to Compressor 4 using Final Cut Pro X and I can't figure it out. Please help!

    jakelovesanna wrote:
    The video itself is intirely 5 minutes, but the timeline goes to 24 hrs.
    24 hours?
    If you select the timeline and press Shift+Z do you see a lot of black space in the timeline? If so, you may have a huge gap clip (although I fail to understand how you achieved it). Click on it and if it can be selected, delete it with the Backspace Key (next to the = key).
    Then press Shift+Z again.
    If I've got this wrong, can you post a screen grab of your timeline?
    Andy

  • HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

    i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

    Same reply.

Maybe you are looking for