Using Firefox links, buttons checkboxes and so, don't work after first action on a webpage.

I have an irritating issue working in web pages. If I start a page and I have to click or select something it works the first time but the second time I first have to do an action outside Firefox before I can proceed working.
I can not check a check box, or select a value form a pull down list with the mouse. but I can navigate to that with the arrows and select with enter.
With Thunderbird I have the same issue.
I had this issue a year ago using Windows XP. I reinstalled the machine with Windows7 and that worked fine until now suddenly it comes back.
It is only the case in these two applications, the rest is working fine.
Is there anyone who can give me a solution?

It doesn't use RAM memory. It uses memory from my HD. As soon as I close firefox because it don't respond I see the memory going back to normal. I will try now to uninstall/reinstall to see what will happen.

Similar Messages

  • How do you diable a toolbar? I just started using Firefox on my laptop and I don't have the hang of it yet!

    I just started using Firefox on my laptop and I don't have the hang of it yet!

    See:
    * https://support.mozilla.com/en-US/kb/Uninstalling%20add-ons#w_how-to-disable-extensions0-personassf-and-plugins

  • Urgent! "ThinkVant​age" button and F11 don't work after disk partition.

    I just bought a ThinkPad T400 last week.
    At first, I partitioned the C disk into 3 disks: C, D, E. I didn't change EISA partition.
    Then I use "Rescure and Recover " to reinstall Vista and restore the system.
    After it finished, I can enter Windows, but windows is not installed properly, without many funtions. And I can't install software to solve the problems because Windows Installer is no correctly installed. Furthermore,  driver letters are changed, i.e., after restoring system, SW_Preload disk becomes "F:" instead of "C:" before restoring.
    I then restarted the computer and want to rescure my T400 via "ThinkVantage". After pressing "ThinkVantage" button, system just asked me choose from "F1- BIOS, F11-Rescure". But when input "F11", the PC still can not enter "Rescure and Recovery" .
    I searched Google about this, somebody said disk partition may lead to thinkvantage error. If it's the case, how to solve the problem?
    Thanks a lot！
    hanks

    hi,
       i have the same problem. i have t400 with vista. i try to enter into the recovery but it is not going. so since it was urgent i installed xp. i havent changed the partition size. now it is not even showing the f11 option to enter the recovery. initially when i tried to enter into the recovery a blue screen used to come and the message used to display. it said a problrm was detected and to prevent damage to the computer windows is shutting down. so i called lenovo and they sent me the recovery disk. but when i run the recovery disk it shows the screen windows is loading files. then again blue screen appears with the same old message. even that recovery disk is not entering into the recovery. i dont know what to do. if anyone knows what to do please let me know. my email address is [email protected]
    Amar Deo

  • Thinkpad t42 mouse and keyboard don't work after factory reset

    I get to the system preperation tool 2.0 but i cant click or select anything . Same thing happens if i turn the machine on and go into safe mode - the keyboard works to select safe mode but when I get to safe mode they both don't work. they both work if i go into the IBM recovery menu.
    Any help would be appreciated
    Thanks
    DK
    Solved!
    Go to Solution.

    Hi DK,
    If you are using the Rescue and Recovery to reload Windows, you should never see the "SysPrep 2.0" appear. Are you using the orignal recovery CDs to reload windows or booting from the F11 partition?  To fix this problem, I would simply start the process of reinstalling Windows again.
    Go to this website and follow the guide for Using Rescue and Recovery to Recover your OS
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70803
    If you are still seeing the "System Preparation Tool 2.0" after reloading Windows, do the following:
    Step 1: Under the "Options" box, make sure the following are checked:
    "Don't reset grace period for activation"
    "Use Mini-Setup
    "Don't regenerate security identifiers"
    Step 2: In the drop down menu for "Shutdown mode", change this setting to "Quit"
    Step 3: Click the "Reseal" button
    This should resolve your issue. Be sure to reload the OS using R&R FIRST before doing the above steps.
    Regards,
    Mark
     Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

  • Keyboard and Mouse don't work after upgrade

    Hi, about one week ago, i've made a system wide upgrade and after reboot my keyboard and mouse stopped working. My hard disk is encrypted and without keyboard i remain at the prompt which asks my password to unlock the encrypted partitions. So i don't even arrive to login manager. I tried all the solutions i could find but none of them worked for me.  I saw similar posts on the forum and i'm sorry if i'm posting it in wrong place.
    Here is my  Xorg.0.log file, it seems like because of hotplugging, xorg disables mouse and keyboard but i couldn't disable hotplugging with the given methods like adding flag to the /etc/X11/xorg.conf file:
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    I 've installed/deleted xf86-input-keyboard/mouse and reinstalled xf86-input-evdev etc and it didn't work.
    I tried to downgrade to different versions of kernel, i didn't work.
    There are "00-keyboard.conf"   "10-evdev.conf"      "10-quirks.conf"     "50-synaptics.conf"    files under  /etc/X11/xorg.conf.d
    So i don't know what to do else, i hope someone can help me.

    ewaller wrote:
    When you boot to the Ubuntu system, before you chroot, look at the output of lsmod and note the modules in use.  In particular, I am interested in modules that contain 'lpc',  So try lsmod | grep lpc
    lpc_ich 21163 0
    Post the module names that that finds here.  Also, look in your initrd for modules for the LPC bus driver.  It does not exist in mine.
    ./usr/lib/modules
    ./usr/lib/modules/3.15.8-1-ARCH
    ./usr/lib/modules/3.15.8-1-ARCH/modules.alias.bin
    ./usr/lib/modules/3.15.8-1-ARCH/modules.builtin.bin
    ./usr/lib/modules/3.15.8-1-ARCH/modules.devname
    ./usr/lib/modules/3.15.8-1-ARCH/modules.dep.bin
    ./usr/lib/modules/3.15.8-1-ARCH/kernel
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-aes.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd256.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/aes-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/af_alg.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-sha.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/authenc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ctr.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sr_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/glue_helper.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/md4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rng-core.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_raid6_recov.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_tx.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serio.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/seqiv.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64-3way.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp-crypto.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_user.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-region-hash.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_null.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ansi_cprng.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/hmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/deflate.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cdrom.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rsa.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-storage.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/i8042.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xts.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/scsi_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/seed.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-hcd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_skcipher.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/public_key.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xor.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/zlib.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc-t10dif.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/authencesn.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/mbcache.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/vmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sd_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_pq.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/mpi.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usbcore.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-crypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-pci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-log.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ecb.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6_pq.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc16.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_hash.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-sse2-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-snapshot.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccm.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd128.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xhci-hcd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4_compress.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6test.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/oid_registry.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd160.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/gf128mul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/gcm.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cts.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xcbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_xor.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mirror.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/x509_key_parser.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/asn1_decoder.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif-pclmul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/aesni-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usbhid.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lrw.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ext4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-bufio.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/arc4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/michael_mic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libahci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/uas.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/jbd2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tea.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/pcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/hid.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/fcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/des_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libps2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/pcbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tgr192.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ablk_helper.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/asymmetric_keys.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd320.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/anubis.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/khazad.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libata.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-clmulni-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_memcpy.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ahci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/wp512.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc_compress.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32-pclmul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/atkbd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/md5.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cryptd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/modules.symbols.bin
    But, my keyboard and touchpad don't exist in the ISA bus address space.  Things that used to live on the 1980's vintage ISA bus (like serial UARTS and ancient keyboard controllers) are now serviced by the serial LPC bus.  I think you don't have that driver available in the initrd preboot environment
    Sorry, i'm not good at these things, so which driver i should install if it's the case? (By the way, i added  atkbd to the MODULES= and "earlymodules=atkbd modules-load=atkbd" to the kernel parameters, but i didn't make any change.)
    Pse wrote:
    Note that you shouldn't do this as a permanent solution, but just to get through the bootloader issue for now, manually edit /boot/grub/grub.cfg and change the relevant lines to point to the LTS kernel (in other words, grub-mkconfig should NOT fail, but that's not your biggest problem right now). This way the entry that pointed to the common kernel should now point to the LTS one.
    You can find the LTS kernel files in /boot; the names should give them away. Remember to change both the kernel and initrd lines in grub.cfg.
    In fact, i also have done as you told(by changing lines to the lts) and read about the error that grub-mkconfig gives me. It says it's ok, error is not important it should work properly. So i have some problem with my bootloader. I can't see the boot option anyway. Problem must be about UEFI because i remember that i had booting problems also when i first installed arch to my computer. I see all lts and lts.img files under /boot directory but somehow don't see as boot option.
    Anyway, thanks a lot for all your help, maybe i do something wrong, i can't solve the problen. I'm going to reinstall my system, because i don't have time anymore. I hope at least this post would be useful for somebody else.

  • ICal and Mail don't work after downgrade from Lion to Snow Leopard

    Hey everyone, after an extremely awful time with with Lion (it knocked out of my audio interface AND my wireless) I downgraded back to Snow Leopard yesterday. I made a Carbon Copy of my Lion drive with all my data on an external drive (which I still have) and after wiping my local drive clean I reinstalled Snow Leopard from my disk. After it was done I chose to transfer data from another system local system (I selected everything) and an hour and a half later everything was transferred over. After doing a software update, I've found that I get big error messages with iCal, Mail, and even the App Store that say they can't open and I'm assuming that it has to do with incompatible data that got transferred from Lion. Any ideas on how to get those programs back up and running?? Thanks so much for you help!
    Luke
    ps. here's the error message from iCal
    Dyld Error Message:
      Symbol not found: _kSecOIDX509V1ValidityNotAfter
      Referenced from: /System/Library/PrivateFrameworks/ApplePushService.framework/Versions/A/ApplePu shService
      Expected in: /System/Library/Frameworks/Security.framework/Versions/A/Security
    in /System/Library/PrivateFrameworks/ApplePushService.framework/Versions/A/ApplePu shService

    > In the device manager the two ports are listed under "other devices" and no driver is installed for them.
    Indeed the USB issue seems to be related to missing drivers.
    You have to install this USB 3.0 driver:
    [AMD USB Driver v 2.0.7.176 Windows 7 - 64 Bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=178&selProduct=7534&selSh ortMod=null&language=13&selOS=30&selType=all&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=all&page=3&ID=87792&OSI D=30&driverLanguage=42]
    Furthermore you have to ensure that chipset driver was installed too.
    The notebook supports ATI graphic chip and AMD chipset. The chipset driver is part of the ATI graphic card driver and therefore you should ensure that this driver would be installed too.

  • Ping and ssh don't work after waking from sleep

    Hi!
    I have been running Arch on my 2010 Macbook since May and there's always been this one annoyance which I can't figure out: after it is woken from sleep, the wireless (using netctl) happily reconnects and I can browse, check email, run pacman, do dns lookups---everything, it seems, apart from ssh or ping.  Both ping and ssh seem to hang.  If I reboot or restart [email protected], then they both work.
    Running :
    $ ssh XXX.XXX.XXX.XXX
    connect(3, {sa_family=AF_INET, sin_port=htons(22), sin_addr=inet_addr("XXX.XXX.XXX.XXX")}, 16
    where XXX.XXX.XXX.XXX is my work computer. (Full strace: http://pastie.org/private/xhmee0oltrnx3qmblnzq)
    Running strace ping google.com (as root) gives the repeated lines:
    $ strace ping google.com
    sendmsg(3, {msg_name(16)={sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("173.194.34.102")}, msg_iov(1)=[{"\10\0\270\345b\325\0\2\336\36QR\0\0\0\0\353\376\2\0\0\0\0\0\20\21\22\23\24\25\26\27"..., 64}], msg_controllen=0, msg_flags=0}, 0) = 64
    recvmsg(3, 0x7fff2f6d6f90, 0) = -1 EAGAIN (Resource temporarily unavailable)
    (Full strace: http://pastie.org/private/bfygaqtccz0ms2w8hqea4g)
    I can, however, sucessfully ping my router and other devices connected to it.  I have not been able to find out anything relevant that might fix this. I've checked the MTU settings match those on the router and my other laptop running Arch does not have this problem.
    Any suggestions on how to debug this further?
    Thanks!

    I have several mid-2009 8-core Mac Pro's, all running Snow Leopard, and all have been having this problem as well.
    I will not guarantee this is going to work for anyone else....but we have found a (slightly inelegant) workaround for it that has been working for several weeks now without fail.
    Prior to putting your MacPro to sleep, run the volume all the way up and leave it there. Afterwards, put it to sleep as usual. We use the keyboard to do this, but I would imagine any method should have the same affect. However, I've not experimented.
    Anyway...this has worked 100% of the time for us. The only downside of it is that you have to remember to run it up before....and then back down after waking (else that first alert sound or music file you play will really wake YOU up!)
    If this works for anyone else, let me know.
    Apple should never have let this one out the door with this bug. Especially, as Apple Support is....wanting, at best.
    ...sT

  • Macbook pro keyboard and pad don't work after installing drivers.  Help!

    I just installed windows XP SP2 on a macbook pro 2.66 i7 running 10.6.4. I installed the boot camp drivers and everything from my OSX install disk and now neither keyboard, trackpad, nor usb mouse work. Not sure what to do other than delete the partition and start over. Any help is much appreciated!

    I have the exact same problem with the same two operating systems and the same exact computer. Needless to say, I would also love to get an answer to this question.

  • Macbook pro mouse and keyboard don't work after installing drivers.  Help!

    I just installed windows XP SP2 on a macbook pro 2.66 i7 running 10.6.4. I installed the boot camp drivers from my OSX install disk and now neither keyboard, trackpad, nor usb mouse work. Not sure what to do other than delete the partition and start over. Any help is much appreciated!

    I have the exact same problem with the same two operating systems and the same exact computer. Needless to say, I would also love to get an answer to this question.

  • Why Flash and videos don't work after 10.6.7 update?

    After os update Flash, Shockwave and videos stopped working on Safari. Also Flash CS5, Flash Builder 4 and Flash Catalyst CS5 stopped working. An error message on Flash CS5 "Error initializing Java Runtime Environment. You may need to reinstall Flash." I have uninstalled and reinstalled stuff, fixed the HDD errors etc but so far no solution. Is this simply error in update software made by some tired engineer?

    2 Suggestions:
    1) Try reinstalling Mac OS X 10.6.7 via Combo Update, it's a common troubleshooting step:
    http://support.apple.com/kb/DL1361
    2) Have you installed the latest Mac OS X Java Update 4?
    http://support.apple.com/kb/DL1360
    I would also suggest to check Adobe's Support Page to see if other users are experiencing the same:
    www.adobe.com/support
    Good Luck!

  • BI analysis auths and traces don't work after client copy

    Hello,
    We recently moved our BI Development to a new server.  Now, the analysis authorizations I created and assigned to the S_RS_AUTH object are no longer working.  And, the 'Execute as User' feature in rsecadmin transaction to trace a user is no longer working.
    Do I need to regenerate something or reconfigure something?
    I inherited this system and was not the original person to set up BI authorizations and traces so I do not know what steps may need to be repeated after a client copy.
    Thanks, in advance, for any advice.

    Thank you Juilius.
    It was actually our Developer who made changes to the reports I was testing and really didn't have anything to do with the client copy.
    However, the trace functionaly was weird.  I had to change a parameter on my user id to get it to work.  So, actually, the client copy did change that setting.
    Thanks much.
    Penny

  • BT and WLan don't work after new WIn 7 installatio on Satellite C850 PSKCAV

    Hello
    I have Satellite C850 - short model PSKCAV. I have installed Windows 7 32bit correctly but the BT is not installed correctly, I have tried many options but i couldn't. activate the WIFI neither the BT.
    What can I do?
    Thank u.

    If you want to have well working BT and WLAN you must install right drivers and some additional Toshiba specific tools and utilities.
    I dont know where you have bought this notebook (country) but visit please Toshiba support page for your country and install all offered stuff for Win7, especially BT filter, WLAN card and Toshiba Value added package.
    If you want to have more help from us post exact model and country of purchase.

  • Using Firefox version 29.0 and want tabs below toolbars. Any ideas?

    I am one of those users who prefer the tabs below the toolbars. In version 29.0 there does not appear to be any solution to getting them there. I have searched all the menu bars and gone the route of changing browser.tabs.tabsontop to false. Nothing has worked so far and I'd hate to load an older version of Firefox just for tabs. Has anyone else used version 29.0 and solved this dilemma successfully?
    Thanks for any help or advice...ahava1313

    For around 4 years now I have had to train and show many hundreds of people how to make forefox work properly with addon features like Tab mix plus and how to put there tabs below so they could improve there work productivity becouse they just didnt know any better way existed. '''With over a million people now having downloaded the new classic restore addon in order to get just ONE FEATURE "TABS BELOW" It defies logic that the Firefox Developers either dont know how to use a browser properly or dont care. '''They are sheep following Internet explorer and google down a black hole of stupidity. I use Firefox becouse its different and its able to work the way I like with TABS BELOW. Firefox 29 lasted aproximately 5 minutes before I went back to FF 28. I would happily use FF 29 but ONLY if tabs are below. This should not require an addon. Tabs below should be the standard and it would be the defining feature that makes firefox stand out. The inability to have tabs below is the very reason I Dont use other browsers. If a petition to get tabs below is made just how many signatures do we need to get the developers to listen. What does it take for the developers to listen to its users. I just dont get why this has gone down the path of becomming more and more like crome and internet explorer both of which I utterley hate becouse I cant put tabs below and organise things in the same way I have always been able to do in Firefox. Where has the difference gone. May as well rebadge as "crome clone" or "baby IE". '''Please listen to your users and fix this issue as some of us do know a better way and its TABS BELOW '''

  • How can i remove unwanted bookmarks from bookmark bar on MAC I'm using firefox 4.0.1 and on previous version Ff 3.6 I had organize bookmark button on this version I don't

    how can i remove unwanted bookmarks from bookmark bar on MAC I'm using firefox 4.0.1 and on previous version Ff 3.6 I had organize bookmark button on this version I don't

    http://support.mozilla.com/en-US/kb/Deleting%20Bookmarks?s=delete+bookmark&as=s
    follow the above link it explains it all

  • Im using firefox 4.0.1 and Idm 6.05, I get an error while i click download button.

    Im using firefox 4.0.1 and Idm 6.05, I get an error while i click download button.
    ERROR Displyed is : "cannot connect to dl120.duckload.com:80" and "permission denied. check your Firewall settings and ensure IDM has permits to access internet"
    But i have disabled Windows firewall and i dont have Antivirus.. Plz help me...
    For more plz see tis screen shot : [http://img845.imageshack.us/img845/5234/idmerr1.png link text]

    See if the "stable" version released on 30 June is compatible with Firefox 5.0. That page doesn't mention which versions of Firefox it is compatible with, a serious oversight, IMO. <br />
    https://www.torproject.org/torbutton/
    Plus, it looks like that developer hasn't updated his AMO page in over a year, which makes it impossible for users of that add-on to get automatic updates as each new version of Firefox is released. <br />
    https://addons.mozilla.org/en-US/firefox/addon/torbutton/

Maybe you are looking for