Using Flex to develop ERP system

I am trying to use Flex4 to develop a ERP system. Now i am using Module technology. it's seem some prolbem when dynamic loading module. Thought I have do a force reference in main application. it works. I dont know why and how it happens.
our demo site is http://demo.coolerp.com and our support site is www.coolerp.com
Any good idea please come to me.

This query is best posted to the Flex SDK forums - http://forums.adobe.com/community/flex/flex_general_discussion
Thanks,
Mayank

Similar Messages

Using Flex to develop a ERP system

I am trying to use Flex4 to develop a ERP system. Now i am using Module technology. it's seem some problem when dynamic loading module. Though I do a force reference in main application. it works. I dont know why and how it happens.
our demo site is http://demo.coolerp.com and our support site is www.coolerp.com
You can check the demo site http://demo.coolerp.com, it seems a little bit slow at the same time.
Now we are usng the following arthictecture to implement ERP
http://www.micsun.com/mainsite/show_list_content.jsp?parentId=1949746407&classId=195080214 8
Any good idea or good architecture for cool ERP, please come to me.
BTW, welcome people knowing ERP or Flex knowledge to join free ERP develoment.
tomby wu

Hey Tomby,
Good to know about your idea. I was thinking on similar line, although my motivation was only 'fun' to do this. However, I have good expertise over other RIA platforms like YUI, jQuery etc. Let me know if I can help you any where. I am available at [email protected]

Using Java to Develop Expert System

Can anyone help me to find some information about how to use JAVA to develop an expert system

You can build expert systems with JAVA - that is not a problem. For starting, a good place will be Philip LaPlant's book. It does give good insight into expert systems.
With Java, the systems might get a bit slow though, the processing in these systems are usually very high.
Ironluca

Strange Error using Flex Profiler

Hi,
I am trying to use the Flex Profiler to figure out where to put my time when optimizing the code of a .swf file generated in Flash CS4. In Flex, I select "Profile External Application" for the "Profile" menu item. Then I select "Launch the application manually from Ooutside Flex Builder" and set the timeout to 60000 milliseconds. I then go over to Flash CS4 and start a debug session of the application I want to profile. This should make the profiler pick up the session and give me the stats I need. But I get a couple of weird errors in the Flex Builder.
The first error is a message box the pops up and says: "Profiling can only be performed on the debug version of an application." I am definitely running the Flash application in debug mode... The only thing that I can think may be a problem is that I am using the Flash Facebook API and linking to the external .swc file for that API. Could that cause a problem?
The second error is an exception that gets thrown in Flex Builder and is displayed in the Console. The exception is this:
flash.swf.SwfFormatException: unrecognized fill style type: 202
    at flash.swf.TagDecoder.decodeMorphFillStyle(TagDecoder.java:982)
    at flash.swf.TagDecoder.decodeMorphLinestyles(TagDecoder.java:914)
    at flash.swf.TagDecoder.decodeDefineMorphShape(TagDecoder.java:868)
    at flash.swf.TagDecoder.decodeDefineMorphShape2(TagDecoder.java:849)
    at flash.swf.TagDecoder.decodeTag(TagDecoder.java:310)
    at flash.swf.TagDecoder.decodeTags(TagDecoder.java:170)
    at flash.swf.TagDecoder.parse(TagDecoder.java:119)
    at com.adobe.flash.profiler.internal.PlayerSession.swf(PlayerSession.java:570)
    at com.adobe.flash.profiler.internal.ProtocolHandler.readSwf(ProtocolHandler.java:353)
    at com.adobe.flash.profiler.internal.ProtocolHandler.process(ProtocolHandler.java:114)
    at com.adobe.flash.profiler.internal.PlayerSession.run(PlayerSession.java:383)
    at java.lang.Thread.run(Unknown Source)
It looks like it has something to do with a fill style, but I am just doing standard Flash stuff... No version of Flash Player has had any problems with the .swf file, but somehow the profiler is not liking something.
Does anyone have any idea about what is going on here? Apparently the profiler is a great tool to use to optimize ones code, and I would really love to use it.
Thanks!!!

I would not start a debug session in CS4. I would just find the SWF generated by the last debug session and launch the standalone player with that SWF. There might be some contention in having both CS4 and the FB profiler trying to hook up to the same SWF.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Using the following erp system with oracle

Dear all,
Does anyone have experience in using the Infor ERP LN with oracle. Are they fully compatible...the reason why I am asking is to make a good arguement why our company needs to oracle when we migrate over to our new ERP system which is infor ERP LN. currently the vendors are trying to have us change to sql sever.

The vendor itself should be able to tell you whether they are certified against Oracle. I would definitely official confirmation from the vendor themselves, else you might find yourself in a lot of trouble if it turns out that it isn't certified and you have major problems.
Saying 'I asked a guy on a forum' wouldn't do anything to help keep your job in that case...

Can I use IIS for flex portal development?

I want to use IIS for flex portal development. As we can user
jboss portal server to deploy flex portlets.
Is it possible ?
Thanks

Hello,
pulling 10-25 million rowsYou will never want to show that many records on a page or html based report, the page weight would be absolutely huge along with your network load (this would be the case in any web enviroment), even google which I will have to assume has many more records than you do only shows 10 records returned at a time.
Results 1 - 10 of about 3,510,000,000 for htmlApplication Express can handle sql queries against that data, the question you really should be researching is what it takes to create queries that perform well against such a dataset
http://forums.oracle.com/forums/search.jspa?threadID=&q=query+large+datasets&objID=c18
Carl

How to find Mobile device OS name and version using Flex?

is there anyway to get device information like OS name and version using flex 4.5.1 or 4.6 SDK. i am developing a project in Flex which needs to identify the end user mobile platform like Android, iOS.. and its version like Android means 2.1,2.2,etc..
Anyone can help me on this?

I don't know that there is a proprietary driver. In fact, I'm sure there isn't because I never installed one. I figured there was some code file somewhere that dealt with keyboards. Yes, I have dealt with the developer, they say to tell Apple there is a problem. I have been putting it off and waiting to update since 10.6.3, so the problem is getting a little old. Do I even know there is a problem? I'm not sure what this means. I do know that when I update my operating system past 10.6.2 my keyboard no longer works, and I have to use a stock Apple keyboard to run a time machine reinstall. Why else would I be going through this?

Need suggestion on importing BC SET : UKM_DCD_CUST in SAP ERP system

Dear Gurus,
Client wants me to import BC SET : UKM_DCD_CUST into SAP ERP system. I have found BC SET : UKM_DCD_CUST in T code SCPR20.
I have read most of the SCN discussion and got two way to import BC SET into ERP system as given below. But I need the appropriate way to do this. Can any one help me in this?
1. SCPR20 -> Activate BC set -> create customizing request to import into another system as per link :Business Configuration Sets (BC Sets) and their use - Basis Corner - SCN Wiki
2. Create TR in SE01 in 000 and import into required client as per below proc:
Usual procedure
1) BC SETS will be attached to SAP note usually. Download it and unzip it , you will get a *.bcs file
2) Call transaction SCPR20  BC set --> Upload In the dialog box that then appears, specify the files that you unpacked
Import the set BC into a package that you have defined. activate it with the "Expert mode"
3) You will also get a *.txt file with prog id , obj etc entries , then you have to go to SE09 and create a transport request in the source client of your Solution Manager system (client 000). Open the *.txt and copy the entries it contains into the transport request. Use transaction SCC1 to import the data in your Solution Manager client(s)
Thanks,
Anand Aseri

2). Client copies bring the Customization data but not WorkBench . So you might have to do transport of copies from Old Dev to >New Dev.
So you are saying that the system copy from Production will not bring Workbench data and I need to bring Workbench data by transports?
*system copy from Production will bring Workbench data also, but when you do client copy from development system again on top of client which already has production customization, data and workbench requests, Production customization and data will be overwritten from development customization and data (it depends on the profile you choose for the client copy) *
However Development Workbench requests are more and also has ongoing development work which might not be available in production client and those (Ongoing development workbench requests) you need to import in new system as transport of copies after the client copy
3). If you do system copy from Production and do client copy from dev...obviously Prod customization will be overwritten with Dev rite ?
That's what I expect to happen,
Ok, however, You might need to get Development Work too from the old dev system and don't forget about setting up of partner profiles in WE20.
It's just a thought , Do you have testing client in Dev, if not,You can leave the production client in development system and use it as testing client.
Create new client which is client copy of Old Dev and import WorkBench requests *
Thanks,
Arjun

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

Anyone looking for a job using Flex?

Ok - so I have this job I need to fill with a Flex/Flash pro.
I am having the hardest time. Anyone want to work in Waltham, MA??
Thanks
Eric
Responsibilities:
• Apply state of the art Flex and Flash ActionScript
tools and techniques to design and develop Java software solutions
to meet product requirements for next generation underwriter
workbench
• Create cutting edge Rich Internet Application user
interface that will change an industry and establish a new product
category
• Create software to meet or exceed the highest
industry standards for quality
• Work with other superior development team members in
a collaborative, team oriented fashion
• Work with QA team to isolate and resolve defects in a
timely fashion.
Required Skills:
• Superior Flash Actionscript development abilities
• Expert in OOP with AS 3.0
• Experience with Flash remoting is a plus
• Flex 2 Enterprise Service experience
• Flex Builder
• Cutting edge graphical user interface design
abilities
• Proven new product development experience
• Demonstrated ability to meet schedule commitments
with high quality software
• Proven abilities as a contributing member of a high
performing engineering team
• Fast moving, self-motivated, creative thinker with
exceptional process, analytical, engineering and relationship
skills
• Understanding of Java, J2EE, App Servers, Workflow,
Rules Engines, XML technologies
Work Experience:
• 3-8 years experience in Flash technology, including
Flex Enterprise Services
• 3-8 years experience developing enterprise
applications
• Demonstrable ability to produce cutting edge
GUI’s with superior ease of use characteristics
• Insurance domain experience is a plus
Education Expectations:
Bachelor Degree in Computer Science or equivalent
Master’s Degree in Computer Science or equivalent is a
plus
U.S citizenship or Green Card required
DETAILED JOB DESCRIPTION: We are seeking the “best of
the best” Flex developers to be part of this well-funded
innovative software development startup company. We are developing
breakthrough vertical Rich Internet Application software based on
state of the art technologies (Flash 9, Flex 2 Enterprise Services,
AS3, SOA, Eclipse, etc.). We are creating an industry leading
next-generation insurance underwriting platform for a drastically
underserved market. And we are having fun doing it!
Though we are still in early development, our Underwriting
Management System has met with rave reviews from the customer and
VC community. We are on our way to establishing a new product
category and dominating that market! If you are a superior Flex
programmer with an entrepreneurial spirit, we invite you to
continue reading about this great opportunity.
We are currently selecting members a high performance
engineering team to create breakthrough products. We are using
iterative Agile development techniques to create superior quality
products to lead in our target market. By hiring only the best
development team members available, we are creating a superior work
environment in terms of productivity and quality of work life.
As a startup, we are able to offer meaningful equity in this
high potential company as a key element in a competitive
compensation package. We also provide company supported health
insurance, 401K, dental insurance, disability insurance, life
insurance, competitive vacation and holidays.

Moved to Private Message

Tomcat web.xml "display-name" using flex.messaging.MessageBrokerServlet

       Hello,
When my web application starts with the BlazeDS servlet flex.messaging.MessageBrokerServlet defined in the web.xml we have an error because in the display-name defined at top level in web.xml we have some text containing character ':'. The error is traced to inside the function
         flex.management.BaseControl.getObjectName()
Which gets the object name, and this function calls
   BaseControl.getApplicationId()
which finally calls
ServletConfig.getServletContext().getServletContextName()
This will return or display-name from the web.xml with all it's text. This text contains among other characters the character ':'. We use this tag for the display in the Tomcat Manager to see version number and other of deployed project.
After retrieving this name it is appended in the getObjectName() function to a buffer, this StringBuffer that already contains flex.runtime. and now this name is appended (still with all that we are using for Tomcat Manager with ':' character and other). After the name, other things are appended. Our problem is that, after constructing this StringBuffer an instance of javax.management.ObjectName is created. In it's constructor it takes a String name as input. This String is parsed in base of characters ':', '*', '?', '\n' and so on, and since we have some of these characters in our display-name it all goes wrong.
   My question is, if this is a bug, a limitation or if it is documented that using flex.messaging.MessageBrokerServlet we can not use certain characters in the display-name of the web.xml?
   Greetings, Tim
   We are using
Tomcat 5.5.23
Jdk 1.5.0_14
blazeds-src-4.0.1.17657
part of web.xml
     <display-name>
         Version: 1.10.0.3 (01/02/2011), Environment development, AGP: 10.220.6.8:1557/AGPSVI, AGP_STAGE: host 10.220.6.8:1557/AGPSVI
     </display-name>
     <description>IMPRESA progetto con undergroung</description>
     <listener>
         <listener-class>flex.messaging.HttpFlexSession</listener-class>
     </listener>
     <servlet>
         <servlet-name>MessageBrokerServlet</servlet-name>
         <display-name>MessageBrokerServlet</display-name>
         <servlet-class>flex.messaging.MessageBrokerServlet</servlet-class>
         <init-param>
             <param-name>services.configuration.file</param-name>
             <param-value>/WEB-INF/flex/services-config.xml</param-value>
        </init-param>
         <load-on-startup>1</load-on-startup>
     </servlet>

I have found that this is a bug and there is an issue open at the "Adobe Bug and Issue Management System", BLZ-617. I don't know if work is in progress, but when that issue is closed the problem will be solved.
Greetings, Tim

Oracle Linux 6 and Oracle DB for ERP System

All,
I have a few questions about using Oracle Linux 6 and the Oracle Database for our ERP Server. We are using a System that run off of Appache httpd and Tomcat and connects to an Oracle Database. We currently are running as a hardware installed server, with Oracle Linux 5 and 10gR2. We are looking to migrate to a Virtual environment as we run VMWare for all our other Servers and services. I have started the install of a development/test system. I wanted to install Oracle Enterprise Linux 6 x86_64 along with either 10gR2 or 11gR2. I noticed that 10gR2 was not certified on OEL6 hence why the thought of moving to 11gR2. The one issue I have is the ERP system is not a x86_64 system is there any way of running 32 bit apps on a 64bit OEL install? I would need to compile a few small 32bit C code programs so would need 32bit libs to compile against. Any support would be greatly appreciated. I know that OEL has an i386 install but I also know that the x86_64 has more support for Oracle DB.
P.S.
Our ERP System is programmed via a small company that does not certify anything. They have taken the approach if it works it works (not happy with this but it is what it is). So the main issue is I need to get Appache Httpd, Tomcat running along with ability to compile a few small 32bit apps.
Edited by: Rever75 on May 7, 2012 1:45 PM

x86-64 is an extension of the x86 32-bit CISC instruction set. The 64-bit extension provides support for long mode to address larger virtual and physical address spaces.
You can generally run 32-bit applications on a x86_64 bit CPU and a x86_64 kernel, provided you have the appropriate i386 libraries installed. When you install Oracle 11gR2 11.2.0.1 for x86_64, appropriate i386 libraries are a prerequisite.
Since x86 on a x86_64 CPU is still hardware, there will be no performance penalty to run 32-bit application. Btw, you cannot run 64-bit applications using a i386 kernel. The only exception I know is Mac OS X.

ERP System Design

Hii Freinds,
Myself Priyanka ,and fresher in .net ,I have some queries Please suggest me Right Path,
I have to Develop ERP Sytem in asp.net MVC4 ,so what steps i have to follow,which platform required for that,Is Visual studio12 Internet Templet used for designing ERP System.
Regards,
Priyanka
[email protected]

This forum supports .NET Framework setup.
Your question about MVC4 should be asked in a forum where MVC is discussed.
I suggest you ask here: http://forums.asp.net/1146.aspx/1?MVC
Thank you for your understanding.

Want to do PhD in SAP /ERP System / Managment Information System

I want to Full time PhD in SAP / ERP System / Management Information System in SAP Related Area with scholarships.I have done Master of technology in Information technology from Jadavpur University ( india).I have 2 years I.T experience in I.T and Academics if you can give any helpful information on that I will be grateful to you.
Thanks
Sayanta Mallick

Hello,
As an active UA member, we are interested in supervising PhD students in SAP related areas (Business Intelligence in my own case). Please be aware that, as a student, your PhD would need to have a focus on the challenges and issues in the area (many are noted in both the threads on the Community Network) and not on SAP technology per se - though you may well use SAP technology or additions to it to develop/demonstrate solutions to issues and challenges.
We offer full and part-time study options and details can be found at the following URL:
http://www.brunel.ac.uk/about/acad/siscm/disc/pg/phd
I do not mean to use this as an advert for my institution in particular - as noted in other posts there are many choices open to you.
Mark Lycett
Professor of Information Systems Development
School of Information Systems, Computing and Mathematics
Brunel University, UK.

MDM Integration with ERP system

Hello MDM Guru's.
In our system Landscape, use Baan ERP system to fetch data into MDM, cleanse it and push data to SRM/BI system for Business Requirements.
Our MDM is neither connected to any R/3 (ECC) system. we want to have a kind of Reports developed for MDM Data present in our system based on Companies (our Manufacturing sites) and have a automatic mapping of our Manufacturers , Suppliers & Customers based on Global and local Stratergy.
According to my understanding, we can use MDM API's (ABAP or Java). As MDM is not integrated with any of the ERP (ECC or Netweaver Data base)?
We have options to integrate MDM with ECC 6.0 & Netweaver system. Which could be a better option to connect with? we are planning to integrate MDM with E-Portal too, could Portal data base be used.
Please guide me.
Thanks in advance
Cheers
MSR

Hi Srihari,
If you want to use MDM in you landscape and store and cleanse data in it and then sent the cleansed data to a reporting tool for analysis then you can do it in one of the methods:
- Either connect MDM to the other systems in your landscape using XI as the means of data trnasfer
- Or connect MDM to other systems using the API.
In the first method.you need to use PI/XI to manage the flow of master data to and from your MDM system to others. MDM can be used for data cleansing and enrichment within MDM before syndicating it out.
In the second method you can connect to MDM through other systems using the API.
As you mentioned about reporting on the master data in MDM based on the Companies or manufacturing sites etc.You can achieve this suing MDM ABAP API.
ABAP can be sued as a reporting tool.wherein it will connect to your MDM system through the configured API and fetch the MDM data and generate simple reports .
If you wish to access the MDM data online you can use portal front end. but in this case portal wont be capable to store any information as it is just a front end.
You will have to use MDM as a backend storage system.JAVA API can be used for futher customization on EP.
For ABAP API use you can refer the below link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/tip%2b%2bMDM%2bABAP-API%2b%2bThings%2bto%2bRemember%2b(for%2bStarters)(abap api)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e060251e-b58d-2910-02a2-c9a1d60d9116 (abap api)
For Java API you can refer the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d18d355-0601-0010-fdbb-d8b143420f49 (Java API)
Hope It Helped
Thanks & Regards
Simona Pinto

Using Flex to develop ERP system

Similar Messages

Maybe you are looking for