Using folders/subfolders with 1.17.04 firmware upgrade on MuVo TX

I just upgraded my firmware to version .7.04. Under the Added Features or Enhancements it states 'Supports up to three subfolder levels in the root directory.' I cannot get my player to recognize the subfolder levels.
I would like to organize my music files on my player in the following format: Genre/Artist/Album. For example, I would create a 'Rock' folder in the root directory. In that folder I would create a subfolder named 'Aerosmith'. In that subfolder I would create two subfolders named 'Greatest Hits' and 'Greatest Hits 2'. Each of those subfolders would contain the actual music (.mp3 or .wma) files.
I've tried doing that with Creative MediaSource Organizer, but when I play the music on my MuVo TX FM it only shows folders for each Album. Each Album folder contains the music files.
All of the play options appear to work correctly for the Album subfolders, such as shuffle all and shuffle folder. However, I would also like to be able to have these options for each of the folders and subfolders. For example, I would like to be able to shuffle play all music files in the Rock folder or in the Aerosmith subfolder, in addition to the normal play options.
Has anyone else run into this issue?
Any instructions/assistance would be greatly appreciated. Thank you in advance.

The player only shows folders that have actual music files in them so what you see is correct.
The 3 levels of sub-folders are to allow you to organize your files on the player and to sync with WMP 0 which uses a Music/Artist/Album structure.
To play all of the Rock genre you would have to put all of the files beneath this folder directly into it, not in sub-folders.
PB

Similar Messages

Use InCopy CS4 with InDesign CS5? Or Upgrade to CS 5.0?

Client has InCopy CS4; project is in InDesign CS5.
Can they upgrade to InCopy CS5 (not 5.5)?
I don't imagine they can open an InDesign CS5 file with InCopy CS4, can they?
We're both on Macs
Thanks for your help!

Hello Srivatsan,
The differences between downtime minimized and the resource minimized is the first shutdown of the production system. For downtime minimized strategy it's the phase MODPROF_TRANS. And for resource minimized, it's either EU_import, or the START_SHDI_FIRST. But you can restart the soruce system(but not in production mode) after that until MODPROF_TRANS.
The downtime actually is depend on the hardware and the size of the database. It has nothign to do with the application. It's doing the table conversion and changing and keep them consistent.
To be safe, I would recommend you to plan at least a weekend for the downtime (after MODPROF_TRANS) if the database is not too big.
Regards,
Joe

I have CS3 and want to continue using this product with having to do n upgrade. How can I use

I have CS3 and want to continue using this without having to upgrade. I dont want to spend money - I just want to use what I have. Is this possible/

Just continue using it if that is your choice - there is nothing forcing you to buy anything newer. You might need to continue using the same computer as well. Upgrading your computer could lead to an incompatibility between the software and the new system.
Just so you know, CS3 is not eligible for an upgrade any longer as of January 1.

Would you buy an n200 when firmware upgrade a problem or go with nan

My dealer has both the n200 and nano with n200 a bit lower in price.Would you go with n200 if no firmware upgrade seems to exist or go for the nano?Does the n200 have decent firmware in it so upgrade not needed?Is there firmware out there to stop the backlight buzz? thanks matt

First of all, compare the n200 to the Nano Plus. The Nano lacks FM radio and doesn't come with the case and armband(In the US both the n200 and Nano Plus have FM and the case and armband. In other places the case and armband might not be included). I would tend to want the Nano Plus if it is close in price to the n200 since going forward firmware upgrades for it will probably be available for longer than for the n200. Some of the earlier n200 firmware does have issues, especially that before .2 . If you do decide to buy an n200 you should plan to do a firmware upgrade as soon as you get it. It is not easy to tell what firmware an n200 will have just by looking at the package. If the price of the Nano Plus is $20 or more above that of the same capacity n200, then I would prefer an n200. If the Nano Plus is only $0 more then I would prefer the Nano Plus. Between those I guess it is a toss up.

WRT350N firmware upgrade not working

Hi, I've just been given an unused WRT350N router.
I've had a few problems getting it setup on my MAC (OSX 10.5.6), but it transpired they were problems using Firefox which were resolved when I started using Safari. However, I still have one outstanding problem with upgrading the firmware....
I want to upgrade the firmware from the original 2.0.10 to the latest available of 2.0.19. I have downloaded this from the Support page, which gives me a readme text file and a .IMG file which i presume is the firmware file (all instructions I have found imply it should be a .BIN file)
I have connected my router to the MAC using a wired connection and followed the firmware upgrade instructions (selecting the .IMG file), followed the rest steps (including using the hardware reset button, and the software factory defaults option), but when the router comes back up it still says its at firmware 2.0.10.
I get no error messages, and have noticed that at the end of the upgrade it does NOT display the "Upgrade is sucessful, rebooting.." message.
I have been through this several times with same results. Any ideas please ?
Thank in advance.
Solved!
Go to Solution.

I have this same problem now with firmware for WAG54GS   the zip file produces a .IMG file after running winzip
This file is not acceptable to the firmware upgrade as a .BIN file.
The firmware is expecting a .bin format.   It does not like this .IMG file.
The documentation all refers to .bin.
Just renaming the file as .bin causes the linksys to abandon the upload.
I am on a Windows XP.       .BIN is UNIX/LINUX terminology.    Do I have to do the firmware upgrade on Linux?
Tried to get some software to checkout the   .img file but nothing likes it.
WAG54GSv1-E1-AnnexB-ETSI-ML-1.01.05-code.img is what my winzip gets.
What am I supposed do with this file to get it into the right shape for the     WAG54GS?
It wants   .bin file    not this?

Creative Zen Microphoto - "Firmware upgrade failed&qu

Hi,
two days ago my Zen Microphoto started in "Recovery Mode".
I had no means of getting out. I first selected "Clean Up" and rebooted, still "Recovery Mode".
Then I downloaded the latest firmware version for it:
ZENMicroPhoto_PCFW_L6__3_0.exe
Then I selected "Upgrade Firmware", acknowledged with "Yes", the firmware was deleted, but the windows firmware application said "no player connected" after connecting the player.
Okay, after googling a bit, I found out that I needed to downgrade from WMP to WMP 0.
I (painfully) did this and after installing an additional Registry Key via fixup.cmd the
ZENMicroPhoto_PCFW_L6__3_0.exe
detected the player (hurray!). It showed "Current Player Firmware Version .20.0 " and "Upgrade File Version .3.0".
When clicking on "Upgrade" at the windows application, the blue progress bar appeared and the player showed "Recovery Mode" and a blinking USB logo.
What it did NOT show afterwards was a gear symbol with "Upgrading firmware" (which I found on a screenshot in the internet).
When the blue progress bar of the windows firmware upgrade application reached about 85% it halted and after minute the windows firmware application showed "Firmware upgrade failed!" while the player only showed a black screen with "Recovery Mode" and the green battery symbol at the top.
I also tried the same procedure with
ZenMicroPhotoP4S_PCFW_LB__20_0.exe with the same result: "Firmware upgrade failed!"
Any ideas how to "repair" the player
Toddl
Message Edited by Toddl on 04-2-2008 09:40 AM

I have this same problem except with the Zen Vision: M. Any help would be appreciated.

6220 Classic Firmware upgrade - stuck / any ideas ...

Am trying to use Nokia Software Updates to do a firmware upgrade to my 6220 Classic from v 03.06 to v 03.46.
All going smoothly until the stage when the updater tells me : Updating the Software, please wait... Estimated time left : 15 mins.
This has now been reading like this for about half an hour - clearly it's stuck.
Any ideas ? Lots of grim warning about "Don't disconnect etc etc".
Thanks.

I ended up solving this myself simply through persisting. Dull and clunky process, but I ended up ignoring the "do not disconnect..." warnings. disconnecting it, and starting all over again.
Strangely, and I hope it's different for you, I now have a phone that confirms that it has the new firmware loaded up, but I see no discernible difference in performance, battery life etc etc. Close to a waste of time, if Nokia cares (which I don't think it does).

TS4463 I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened.

I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.

I tried rebooting. It didn't change anything.

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am just learning Lightroom 5. Noticed very recently that 'Photo is Missing' has come up against virtually all my files over all my folders/subfolders. That said, using Finder on my MAC I can see thumnails of ALL my images which sit within my Pictures Fo

I am just learning Lightroom 5. Noticed very recently that 'Photo is Missing' has come up against virtually all my files over all my folders/subfolders. That said, using Finder on my MAC I can see thumnails of ALL my images which sit within my Pictures Folder. Equallly on my back-up on the Mac's Time Machine all versions of same images are present. Any solutions?

It means that the photos have been moved or renamed or deleted outside of Lightroom. (Hint: don't do that)
To fix the problem, please follow these instructions:
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

Is there going to be a firmware upgrade for mountain lion customers that have a Macbook with a soild state drive so we can use the Power Nap feature?

Is there going to be a firmware upgrade for mountain lion customers that have a Macbook with a soild state drive so we can use the Power Nap feature?

here: http://www.apple.com/osx/whats-new/
"Power Nap requires a Mac notebook with built-in flash storage. May require a firmware update."
We have to wait for the Firmware-Updates. Some are already here: http://support.apple.com/kb/HT5394
And I am shure, that you will need for Power Nap one of the newer Macs with SSD from 2011 and 2012.

Driver help with adapter firmware upgrade

I'm trying to upgarde the firmware for my Netgear WG511T adapter. After
uninstalling the current firmware, the Netgear firmware upgrade
installation requests the infamous 'Novell Netware DOS driver disk' -
first thing it wants is "lsl.com" (not sure if I will need others).
I've pointed the installer to the likely folders and searched the hard
drive for the file, but no success.
I have found a couple of Novell drivers files at:
1) http://www.novell.com/coolsolutions/tools/13555.html
reportedly useful for my situation
and
2) http://download.novell.com/SummaryFr...d=SUeAaKqKpQA~
the latest (& last?) Novell Client v3.4 for Windows* 95/98
My question is - Am I on the right track ? - thing is, probably
obviously, that I (think?) I know just enough to be dangerous.
I thought it would be a good idea to ask how I should proceed here, in
this forum, after searching for help with this situation and only
finding clues, as opposed to a clear solution.
Thank you,
MB

Alright - just in case this comes-up in someone's search for advice on
the same problem.
Turns-out I did not really need any drivers - I saw a comment to that
effect on another site in my search for tips.
Anyway - anyone with the same problem should just 'cancel' the search
for drivers and continue the installation of the firmware - mine
installed after I cancelled the search for 'lsl.com'
I now have my first wireless network running - and with WPA encryption
- and it is working !
Thanks,
MB

Subfolders with images ??

Hi!
Is it possible to display subfolders as images in the "Sub-
folders" region of a folder? Is there any workaround to do this?
I have thougth that I can insert "text" elements (and insert
pure html with images on each one) in another folder region
instead of using the subfolders region, but it has to
be "hardcoded" by each folder, and it is not very easy to
mantain . .
A better idea to do this? Any suggestions?
Thanks anyway!!

You can try a custom folder type, as described in
Re: Date, calendar, Error on page
Regards,
Jerry

Did scan to Diskstation stop connecting with firmware upgrade CLP1CN1516AR

I use my HP 8600 N911g almost daily to scan to LAN network attached storage, in this case a Diskstation. As of today I cannot scan to the Diskatation any more, it just will not connect. I have tried powering off in turn the printer, the router, the diskstation, letting each sit for 1 or more minutes before restarting, to no avail. I can print from my laptop to the printer, i can ping it via IP address and computername, I can open up its web interface and test the network locations - four are defined on the Diskstation, none of them connect. I created a new definition of an existing folder on the Diskstation and tested that, it also could not connect. From my laptop (Windows 7 SP1 64) I can access the Diskstation folders fine through both Windows Explorer and a command line interface. HP diagnostic tools on my laptop all run fine except for the scan test, which pulls in both sheets of paper from the ADF tray but the second sheet does not quite get ejected and the test locked up my printer; cancel and power button did nothing so I had to unplug it. I noticed yesterday that my printer said it was downloading an upgrade but eventually it aborted. Today I ran HP 8600 tools and it said I was up to date. It reported firmware version CLP1CN1516AR, which I understand was released 7/20/15. Could this upgrade be the problem? My printer is connected via ethernet to a LinkSys router that is bridged wirelessly to a Verizon FiOS ActionTec router to which the Diskstation is ethernet attached. This system has been in place for a year or so. My laptop, bridged router and printer are all within 3 feet of each other, the ActionTec is 30' away through two walls, my latop rates the ActionTec 4/5 bars in Windows icon or -59 dBm from Xirrus WiFi Inspector, from near to the printer. Vey frustrating. Any ideas, please?

I was called by HP Support, they reached me Friday just as I was about to leave to go on vacation for two weeks. They had read this thread and knew it was more than just me. They acknowledged a problem and assigned me a case number but closed my ticket, I need to call them when I am back on the 24th August so we can work to find a solution. They will open a new ticket then.
I hope HP will contact you and open a ticket for you and resolve the problem and issue a new firmware upgrade including the fix so that I can try it when I return, but that might be a stretch as presumably it goes through some QA testing before they release it. At least they should start working on it with your help.
Please keep us posted on any developments.
For a workaround I enabled scan to computer and email scan. I tried webscan interface and it scans but when finished it says click the save button to save but there is no save button, the two scan and cancel buttons remain unchanged from before initiating the scan. I tried both of those and they do what they say they do and don't save. I can see a preview mini image of the page and if I hover over it it presents a series of icons including a diskette but when I click that I can go through the motions of saving but the file is empty. The email scan is easiest to use, I send to myself and it takes a few minutes after scanning to appear in my inbox and sent folder. From there I can download to NAS or forward as an email. But compared to scan to network it is much slower and more labor intensive.
Good luck, both of you (pcni & greylisted).

Using Folders in Logic 8

I'm newly switched to Logic from Cubase. Question on using folders properly!
If I drag say 6 guitar tracks from the bin in to the arrange page. Then select all those new regions/tracks and 'pack' them in to a folder. I'm left with a bunch of newly created empty tracks in the arrange page, that I then have to delete. Am I doing this right? I also have to rename all the channel strips in the 'all' mixer page, otherwise they are all just named 'audio<x>'.
The track names in the folder all match the region names which is what you'd want. (When you double click the folder, to navigate in to it).
This could simply be my lack of interpreting what's in the manul - or is it a bit clunky yet??

Welcome to the forum and to the sometimes illogical world of Logic.
Yup. That's pretty much the way things are. You're left with unused tracks. The reasoning goes something like this. You may have several regions on a track but only want to pack some of them. You'd do this, for example, if you have a bunch of regions that you then wanted to loop. You can loop folders but you can't loop separate regions that are consecutive.
So, you pack some regions but you want to leave the tracks behind because they have other regions in them. Logic's answer? Never delete the tracks, regardless of whether you've emptied them or not. I can see a lot of people applauding this approach. At least Logic doesn't get rid of things that you're about to use. If you don't want them, just delete them.
Have fun!
Pete

Using folders/subfolders with 1.17.04 firmware upgrade on MuVo TX

Similar Messages

Maybe you are looking for