Using Forte with TCP/IP and DECnet clients

Can anyone give me information on how to start up the name server on a Vax
Alpha so we can use Forte 20e2 with both Windows 3.1 DECnet and Windows NT
TCP/IP at the same time? We know how to start it up to do one at a time, but
not both at the same time.
Thanks,
Steve Isaac
Hydro Electric Commission
Hobart, TAS
Australia
[email protected]

Hello Steve,
"How to start the Forte' nameserver with support for TCP/IP and DECnet"
Thsi can be done fairly easily. The procedure is documented in the Forte'
manuals (I do not remember which one, but it is probably the
system management guide).
You need to make sure that FORTE_NS_ADDRESS and FORTE_LOCATIONS are set to
specify both TCP/IP and DECnet.
I think that when you install Forte on VMS you have the option of specifying
support for TCP & DECnet, in which case the logical names are set up
correctly.
Regards,
Richard Kirk
Digital Equipment Corp

Similar Messages

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

Login intermittently slow with ZCM agent AND Novell client

We continue to struggle with intermittently slow logins in our environment. In testing, we noticed that logins are very fast (10-20 seconds) when only the Novell Client is installed, and very fast (~10 seconds) when only the ZCM agent is installed. However, when they are both installed, logins slow down, sometimes to 1.5 minutes or longer.
We have checked DNS and rDNS, and they are both configured properly. SLP is working properly as demonstrated by the fast logins when only the client is installed. We use LDAP for user lookup, and it also works very fast to resolve user names (~ 1 second).
We are using ZCM 10.3.1, and the client is fully patched as well (both Novell Client 2 and 4.91)
Are there any specific settings (for the ZCM agent or the client itself) that might address this issue?

My apologies, I told you to remove the wrong thing.
I should have said NMAS instead of CASA.
I am just so used to saying CASA when talking about ZCM.
In regards to NMAS, you could simply rename "NWSSO.DLL" as a test.
If NMAS is installed which is tested by the existence of this DLL, then
a certain NMAS call is always made, which in some cases can take a long
time.
On 11/9/2010 12:06 PM, dshofkom33 wrote:
>
> craig_wilson;2042688 Wrote:
>> Try removing CASA from the device and see if that makes a difference.
>> A TID will be out on the issue soon.
>>
>> On 10/5/2010 4:36 PM, kjhurni wrote:
>>>
>>> Hmm, I will have to try that. I've only observed that with ZCM
>>> installed (with Novell Client 4.91 SP5 on XP) that the login time
>> goes
>>> from about 12-15 seconds to about 50-70 seconds.
>>>
>>> But I've not tried "just" the ZCM agent.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
> I removed CASA and now I cannot sign into ZCM. I get the "unable to
> login to network because the login credentials are incorrect" Windows
> Security Message. Any ideas?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

There is no more LiveType with Motion 5. You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

I am using Firefox with OS X and suddenly I lost the slot in which I type URL's in the top of the browser. How can I get it back?

I am using FIREFOX with OS X and suddenly I lost the slot at the top of the browswer in which to type the URL's. It just disappeared.
How can I get it back?

View --> Toolbars --> Navigation Toolbar

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
 Cheers, Tom

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my ipad is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my apple laptop is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

To use itunes 10.7 you need to have Snow Leopard operating system installed
These are the system requirements
System Requirements:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
If you can run Snow Leopard you need to purchase it
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help. I really just need mail file and desktop files recovered.

If data were on the SSD drive with TRIM - practically no chance. If HDD - use DIY recovery software such as DiskDrill or DataResue.
As quickly as possible turn off the drive where deleted data.
Use an external HDD with installed OSX for data recovery.
Alex
Apple Certified Support Professional

I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why?

I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why? Can I reconfigure it to the IMac?

Remove it from the Macbook first. BT devices may only be connected to one thing at a time.
Barry

How to use authid with rwservlet via WebLogic Thin Client

1. Using J2EE Thin Client for WebLogic (WL) to submit interactive requests for Oracle Reports (App Server 10g) running on another server without SSO.
2. After starting basic Infrastructure, we start rwserver in batch mode (no other mid-tier components are used).
3. It appears that the cgicmd.dat file in the Thin Client conf directory on the WL server controls the DB access with the key:connect string info it has.
4. We had been allowing the testers to come in via the web through a SunOne (iPlanet/Netscape) web server instance, which in turn connects to the WL server running the Thin Client instance.
5. We noticed that anyone could run rwservlet to view report status with the showjobs command via a URL through the same mechanism as point #4 above, and were concerned about security of the reports - "bad".
6. Then someone realized the showmap command could also be specified, and thus see the DB connect string (Id/pw/SID) - "worse".
I researched securing Reports, and read through the white paper, "Securing Oracle9i Reports", and although it discusses security without using SSO, all it says is "users accessing a secured instance of Oracle9iAS Reports Services will be challenged to identify themselves by the Reports Servlet, using its own authentication mechanism (as with Reports6i)", but I can find no explanation of how that works, nor how it would work with the WL Thin Client.
Questions:
1. How are the Id's/passwords set up under AS 10g "as with Reports6i" in this environment going through the WL Thin Client?
2. Is there anything else that needs to be done to secure the created reports, and the connect string info (i.e. using authid with rwservlet?showjob, and not allowing the rwservlet?showmap to be executed at all)?
TIA,
ROC

the JDBC Developer's Guide (11gR2)
gives an example in chapter 9 under "JDBC Thin Driver Support for Encryption and Integrity", sub- "Setting Encryption and Integrity Parameters in Java"
from Oracle SQL Devloper, without redirecting the client to use the OCI/thick driver, choose, new database connection, connection type Advanced. add the entry from the example noted above to the Custom JDBC URL form.
for example:
Properties prop = new Properties();
prop.setProperty(OracleConnection.CONNECTION_PROPERTY_THIN_NET_ENCRYPTION_LEVEL,"REQUIRED");
prop.setProperty(OracleConnection.CONNECTION_PROPERTY_THIN_NET_ENCRYPTION_TYPES,"(AES128)");
OracleDataSource ods = new OracleDataSource(); ods.setProperties(prop); ods.setURL(jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=xxxx)(INSTANCE_NAME=xxxx))));
Connection conn = ods.getConnection();
strange side note!, we could not get this to encrypt unless the sqlnet.ora file included the SQLNET.ENCRYPTION_SERVER=required. if this was set to default(accepted), and even though the jdbc thin client properties set to required, the network traffic was still clear text.
good luck

[SOLVED] Routing problems with ssh server and openvpn client

My current setup is an arch box behind my wireless router. My wireless router is running scripts to update the dynamic dns for my internet connection and forwarding incoming requests to port 22 on the arch box. Simple so far.
Now I'd like to setup OpenVPN on the arch box to connect to a 3rd party vpn service but still listen for ssh connections. This way I can have my arch box always connected to the vpn but be able to access it from anywhere. I believe the problem is that openvpn sets up a default route to send all outgoing traffic out over the tunnel, but I don't know enough about routing to make this work. I saw another solution in the forum was running virtualbox and I find that so inelegant. I'm planning on eventually learning more about ip route and iptables but I was also hoping that a networking guru could help me get this set up quickly in the meantime.
ip route while not connected to vpn
default via 192.168.1.1 dev eth0 metric 202
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.11 metric 202
ip route while connected to vpn
0.0.0.0/1 via 10.120.62.9 dev tun0
default via 192.168.1.1 dev eth0 metric 202
10.120.62.1 via 10.120.62.9 dev tun0
10.120.62.9 dev tun0 proto kernel scope link src 10.120.62.10
23.29.126.102 via 192.168.1.1 dev eth0
128.0.0.0/1 via 10.120.62.9 dev tun0
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.11 metric 202
Last edited by ricka (2012-11-05 17:14:48)

First, meop, thanks for your reply. I did not use that method to solve the issue, but I'm going to do some more research into it (I'll speak to why I went another direction after the solution).
My solution so far has come from this resource http://forum.linode.com/viewtopic.php?t=8737
Since my server is behind a router, I do not have to worry about the public IP address changing and I was able to use the private IP in the route statements. Therefore, in my case, the solution was these three lines:
ip rule add from 192.168.1.11 table 128
ip route add table 128 to 192.168.1.0/24 dev eth0
ip route add table 128 default via 192.168.1.1
Keep in mind, as the article states, that applies to all ports (not just ssh). If you want to block other traffic, you need some extra iptables entries.
This also solves my end goal: Being able to connect to this 3rd party VPN with a simple ssh redirect from my always connected server. I can now ssh -D <port> <myhost>, set up chrome to use <port> as a proxy, and have everything redirecting over this VPN connection without any hassle.
meop, this setup is connecting to a 3rd party VPN service and they provided the config scripts for the client. I considered tinkering with that, but found this solution to work and I'm going to do some more reading about each solution to figure out which is the best overall.
enovak, I grepped dmesg and did not see any entries about martian source.
Now another question that comes to mind: What if this server were actually NOT behind a firewall and it's public IP changed? I think you'd somehow have to have a script to check to see if your Dynamic IP address changed and also have a route that only that script would use (send everything else out the VPN route). Then, if your IP address changed, you'd have to change these routes around. I'll leave that solution to someone else :-)

Using SBO with Wyse Winterm S30 Thin Clients

I have a customer who is using Microsoft Terminal Services via Wyse Winterm S30 Thin cllents to access SBO over a VPN. We are experiencing excessive rolling (redisplay) when screens are refreshed. The problem is compounded if a Marketing Document contains multiple Text lines. We have two terminal servers, each with about 12 thin clients connected.
I would appreciate feedback from anyone with experience of using thin clients, regardless of brand.

Hi,
Thin clients normally have a low memory allocation on the video card (8mb to 16MB) so this can be a problem. Check to see if you can change this in the BIOS on the WYSE. If not connect at 256 Colours to reduce this. If you have pictures linked to products then their resolution will not be good but for SAP itself the difference is small. Also rename the SAPSS.AVI to .old if you have not already done so so that the splash screen does not come up when logging in.
In my multimedia testing on thin clients, unrelated to SBO, I found that both memory and processor power made a huge difference, which is contrary to thin client manufacturer claims. As an example I used a 200MHz/64MB TC for a flash application and sound was about 3 seconds behind the image and the image update would skip 3 to 5 frames when updating. Moving to a 800Mhz/128MB TC The frame refresh rate was almost perfect and the sound was only about 0.5 seconds behind. I would therefore test on a more powerful thin client to see if it improves performance.
The S30 is a 400MHz (rated @ 533 on performance by AMD). Try a 1GHz TC with the maximum Video memory you can find.
We are currently using VXL Itona 800Mhz/128MB and do not experience too much rolling but we are using 256 colours.
Hope this helps.

Using Forte with TCP/IP and DECnet clients

Similar Messages

Maybe you are looking for