Using fragment library with SAP MIME repository?

Hi,
I am new here so I hope I'm posting this in the right place.
We use Adobe LiveCycle Designer as part of the SAP Interactive Forms product. We want to use the fragment library but I am unclear how that will work unless we can connect to the SAP MIME Repository.
Does anyone here have any experience with making this work?
Also ... is there any online resource (other than SAP's SDN) with specific help documentation for using LiveCycle Designer ES with SAP?
We are on SAP Netweaver 7.01 and LiveCycle Designer 8.1.
Thanks!
MAH

Hi Chintan,
Thank you for the prompt. I was going to get to it ...
Actually I did not find a way to use the fragment library with referenced objects. By 'referenced" we would mean to be able to change the object in the library and all referencing items would be updated. We did NOT find how to do that.
What we did find, that is still useful to us, and probably anyone working in a development team, is that we could create the library in a shared location and store common fragments there. To use the fragments, go to the library, drag the fragment from the library to your form layout, then 'convert to embedded object' (I think this is on the right click menu, Fragments> convert to embedded object).
This way you still get the benefit of consistency amongst forms using the same element, and only having to develop each element once.
I hope you find this helpful!
Margaret

Similar Messages

Fragment library with SAP?

We want to deploy a set of forms that use references to fragments stored in a fragment library, because there are a lot of elements in common among the forms. Some will change over time and we would like to maintain them in one place. Is this possible with interactive forms for SAP? Would we use a file server location or is there a way to use the MIME repository?
System is SAP Netweaver 7.01 and Adobe LiveCycle Designer 8.1.
Thanks,
Margaret

Hi Chintan,
Thank you for the prompt. I was going to get to it ...
Actually I did not find a way to use the fragment library with referenced objects. By 'referenced" we would mean to be able to change the object in the library and all referencing items would be updated. We did NOT find how to do that.
What we did find, that is still useful to us, and probably anyone working in a development team, is that we could create the library in a shared location and store common fragments there. To use the fragments, go to the library, drag the fragment from the library to your form layout, then 'convert to embedded object' (I think this is on the right click menu, Fragments> convert to embedded object).
This way you still get the benefit of consistency amongst forms using the same element, and only having to develop each element once.
I hope you find this helpful!
Margaret

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Using Connect:Direct with SAP

Folks,
Client is using Connect:Direct to transfer the files from one location to another location.There are two table maintained namely T9AOA and T9AOB with Interface id and Unix scripting w.r.t Processing types respectively.
1.I don't think these are SAP standard tables then why they are not named starting with Z or Y
2.How to use Connect:Direct with SAP.
Searched in SDN and google but didn't get any clear information on the above.From google I came to know this is a Product of Sterling Commerce(AT&T).
Hope someone here who used Connect:Direct with SAP can share the info.
Thanks,
Kiran.

Paky,
The existing Design,had some tables which were maintained with required Unix Scripts.In the program we are just fetching that script from the table and building a Unix Command to move the files.There is also a URL using which we can check the status of the files.As I was just using the already existing design,don't have much info on how C:D connectivity can be designed from scratch.
By Googling,I was able to get some info.May be it will give you some lead.
https://www.google.co.in/?gws_rd=cr&ei=F5apUsrYCYWNrQf1y4GoDQ#q=connect+direct+in+unix
K.Kiran.

Using Document Library with Baseline

Hi there,
I have a specific need with Sharepoint. I have a document library and I want to be able to mark with a tag or generate a baseline for my folders.
I've already searched on the web, and there is someone doing it just coping and pasting every single file. Is that the better way to get this?
Thanks,
Tiago

Hi Tiago,
What did you mean "Using Document Library with Baseline" and "generate a baseline for my folders"?
Did you mean that navigate the document library folders in treeview?
Did you mean that search or filter multiple folders documents with the same tag (managed metadata column)?
You may be able to use the "Navigation Hierarchies and Key Filters" for that specified SharePoint 2010 library, here is an article about metadata navigation settings you can check below,
http://www.sharepointboost.com/blog/understand-and-configure-metadata-avigation-and-filtering/
Thanks
Daniel Yang
TechNet Community Support

Using Aperture library with different accounts

I needed to use my library with two different accounts that are on the same MBP. I read where you might be able to put the library on an external disk and check ignore ownership on the info of the HDD. I had recently installed a 320GB HDD to avoid having to drag around an external so I thought maybe if I partitioned the drive it would "see" the second partition as an external. I partitioned off 50GB and checked the "ignore ownership" in the bottom left corner of the info window. I option+opened Aperture and created a new library in the second HDD. After opening Aperture, I imported a few pics into the library and made dup's. I modified them in my account, closed out of Aperture and logged off. I then logged in under my wife's account and was able to open Aperture by option+opening Aperture and choosing the new library location. The pics that I had imported under my log-in were there as well as the the modified versions. I re-modified the versions to see if it work the other way. I closed out of Aperture and logged out of my wife's account and logged in under mine. I clicked on the Aperture icon in my dock and it came right up w/out any problems. I was able to view the versions that I re-modified under my wife's log-in.
I know you shouldn't share the library across users just in case two account users are trying to access the same library at the same time; but in my case it is one laptop with two accounts so we wouldn't physically be able to access it at the same time.
So if you have a big enough HDD and you don't want to drag around an external, partition it however big you think you'll need it, check the "ignore ownership" box in the HDD info window, add read & write permissions for the different accounts, move/copy your current library to the new partition and option+open Aperture to choose the new location.

Thanks! Just the answer that I was looking for! I had tried just moving the library into the shared directory, but, as we now know, this does not work.
Now only if I had a partition on my local HD (with "ignore ownership" set)...

Have you used Captivate 4 with SAP?

I have tried using older versions of Captivate to create SAP demonstrations and simulations, and wasn't particularly pleased with the output. My employer is happy for me to upgrade to Captivate 4. Before I do, can anyone share their experience of using Captivate 4 with SAP?
Thanks, KristinaWasa

Hi there
I have no clue what SAP actually is. So I'm going to ask that you clarify your request a smidge.
I'm wondering if you are asking if Captivate coexists with SAP so you may record what goes on with SAP?
Or is SAP a delivery mechanism similar to or possibly even a Learning Management System (LMS) and you are asking if Captivate content is easily delivered by and communicates nicely with this system.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problem using a library with an EAR file (ServletNotFoundException)

Hello
I'm trying to use a library (J2EE library project) an associated it to an Enterprise Application Project.
The application was built using the Spring MVC framework.
When I did deploy I got the following warning:
Apr 25, 2006 9:44:17 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[004]Finished Deployment
And when I try to run the application I got the following error:
404 Not Found
The request cannot be processed.
Details:   com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [data-entryLib/servlet/data-entry]. The ID of this error is
Exception id: [00306E5DA8D2004E00000068000052550004124234F31271].
The application run properly when I use the jars file in the WEB-INF/lib folder.
I have been reading some recomendations in this forum, but nobody tell me how to solve this problem
Thanks
Adriana.

Hi Rajesh
Thanks for your answer.
Yes, I deployed the .sda file, add the jars file in the archive server/provider.xml and I checked this: (Problem with EAR referencing a library DC)
The type of reference that I gave in the EAR file was in the archive application-j2EE-engine.xml:
<reference
    reference-type="hard">
    <reference-target
      provider-name="sap.com"
    target-type="library">LibreriaDataEntry</reference-target>
</reference>
<provider-name>sap.com</provider-name>
   <fail-over-enable
   mode="disable"/>
Thanks
Adriana

Using Data Integrator with SAP ECC 6.0

Hi,
We're currently using Data Integrator Version 11.7.2.3. Our primary data source is SAP R3 version 4.7 We're planning to upgrade to ECC 6.0.
I'm trying to determine if it will be necessary to upgrade Data Integrator also. Can anyone tell me if Data Integrator Version 11.7.2.3 is compatible with SAP ECC 6.0?
I'm sure there is a document somewhere but I have been unable to find it.
Thanks,
Mark Duff

Data Integrator 11.7.2.x is compatible with ECC6. Depending on which platform you're using, here are the documents that give this information:
[Linux|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a00aad14-ac3e-2b10-3b85-8208305073b1&overridelayout=true]
[HP-UX|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/0075f72d-ab3e-2b10-28bb-9708525a9f42&overridelayout=true]
[Solaris|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d03ba272-ac3e-2b10-9cb0-84156ef467ec&overridelayout=true]
[AIX|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2057d8d9-a83e-2b10-a997-e4f31f730524&overridelayout=true]
[Windows|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d069a060-b03e-2b10-3c8c-a59f5f4d8ce3&overridelayout=true]
You should keep in mind, however, that Data Integration 11.7.x mainstream maintenence end date is June 2010. Because of that, you may want to consider upgrading to Data Services XI 3.0 or 3.1.

How to use CMS Users with SAP BOPC NW 7.5

Hello,
I have problems importing and using CMS Users with BO PC 7.5 NW.
I am trying two types of CMS-users
1. CMS Enterprise Users created in CMS and using "Enterprise" authentication
2. SAP BW Users imported into CMS using their SAP authentication "secSAPR3")
but both don't work:
In the BOPC Admin Client, I can succesfully select Security->Users->"Add new Users". Both CMS "Enterprise Users" and CMS Users that use SAP authentication are displayed in the "Everyone" Group.
The CMS Enterprise Users are displayed as <username>, e.g. "Miller".
The CMS users with sap authentication are displayed as <SAPSystem><Client>/<SAPusername>, e.g. "KBE100/Smith".
Now If I try to import a user...
1. CMS Enterprise Users
If can successfully import CMS Enterprise Users and add them to the ADMIN Team, e.g. "Miller".
The problem is they can't be used to log in to the Admin Client and Excel Client:
E.g. I enterUser-ID "Miller" and his CMS-Enterprise-password under password after starting Excel Client, an error message shows up: "The UserID, Password or Domain cannot be authenticated. Go back and make sure you entered valid credentials" ... (same error message as if the user wouldn't exist/wrong pw.).
Seems the user wasn't added as BO PC user. Or do I need to use any prefix before the "user ID" for CMS Enterprise users in the User_ID field instead of just "Miller"?!
2. CMS Users which use SAP-authentication (users imported into CMS from BW and use SAP-authentication)
In the BO PC Admin Client, I can't import them: I go through "1. User Setup" select "KBE~100/Smith", "2. User Detail", "3. Assignments", but if I am in "4. Finish" and click on "Apply", the following error shows up:
"Failed to create directory \root\Webfolders\<AppSetName>\<Appname>" for "KBE~100/Smith".
My guess is that the operating system doesn't like the "/" in the Username - but I guess this can't be changed bc. these Users from CMS and are already displayed with the "/" between SAPSystemID~ClientNummer and username in the User-list in BOPC Admin Client!
side remark: if I create a SAP CMS Enterprise user which contains a "/" in the username (on pupose ), I am getting the same error message.
Any help, explanations and workarounds are greatly appreciated - Any solution will be awarded with maximum points!
Best Regards and thanks a lot for your help!

Hi Florian,
The problem seems indeed the file system on the bw not being able to handle "/". The automatic user import from the bw role into the CMC does not give you an option to replace the "/" character with anything else.
This should solve it:
- Go to the CMC double click the user. Delete the server part "KBE100/" and click save. Make sure the default system is set to "KBE100". The user should now be able to login from BPC with the user Smith.
Good luck,
Martin

Using Data Integrator with SAP BI 7.0

Hi,
We're currently using Data Integrator Version 11.7.2.0(using SAP ABAP adapter, BW adapter). Our primary data source is SAP R3 version 4.7 and SAP BW 3.5.
We're planning to upgrade to ECC 6.0(from SAP R3 4.7) and BI 7.0(from BW3.5).
I'm trying to determine if it will be necessary to upgrade Data Integrator also.
Can anyone tell me if Data Integrator Version 11.7.2.0 is compatible with SAP BI 7.0?
any document and advice will help us.
Thanks in advance,
Kyung Woo, Nam

Compatible? Likely.
Supported? No.
We have optimized the BW handling is DI 12.2 a lot, so do yourself a favor and upgrade to this version.

RoboHelp V6 - Using Context Sensitivity with SAP R/3 ECC 6.0

We are creating online help/procedures using RoboHelp,
Version 6. We are also upgrading from SAP R/3 4.6c to SAP R/3 ECC
6.0. ECC 6.0 has different backend coding than 4.6c that does not
allow us, at the moment, to implement context sensitivity. My
question is this: Can RoboHelp V6 be integrated with SAP R/3 ECC
6.0 that will allow for context sensitivity? Does coding exist for
this to happen? What must take place for this to work properly? Any
assistance would be greatly appreciated.

Welcome to the forum.
I can't help you on the coding side but is using a URL an
option? If it is, then see my site where I explain how to call
webhelp using URLs. That includes how to open the help pointing to
a specific topic, thus giving you context sensitive help.

Problem while using cewolf library with jsf jboss.

Hi Guys,
I am trying to use cewolf library to generate graphs in my web application based on jsf. But I am getting the following exception.
I have pointed down that cewolf. jar file is causing the problem.
javax.servlet.ServletException: #{LoginBean.validateUser}: javax.faces.el.EvaluationException: javax.ejb.NoSuchObjectLocalException: Object Not Found ; CausedByException is:
     Receive timed out
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:209)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
root cause
javax.faces.FacesException: #{LoginBean.validateUser}: javax.faces.el.EvaluationException: javax.ejb.NoSuchObjectLocalException: Object Not Found ; CausedByException is:
     Receive timed out
     com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78)
     javax.faces.component.UICommand.broadcast(UICommand.java:312)
     javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
     javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
     com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
And this login pages does not at all uses the cewolf library.

Hello, Reena
Your process flow seems to be correct in term of getting/freeing memory.
Following error
The problem occurs after executing the procedure for 5000 records and I get the error
ORA-04031: unable to allocate 4176 bytes of shared memory ("shared pool","unknown object","sga
heap","library cache")may be caused by memory leaks in xdk or memory fragmentation(due to get/free memory cycle)
To find out if this is an memory leak issue you could try to monitor V$SGASTAT from one session while running your batch process in another session.
To prevent (or lower its impact) fragmentation issues try to PIN objects, and adjust java_pool_size and shared_pool_reserved_size.
Anyway, counsult your Oracle DBA.
Oracle version 8.1.7.0.0I think, you should apply database patch first of all. The latest one (8.1.7.4.x) could be accured from Metalink.

Can we use six sigma with sap

can we use six sigma with sap

what i want to say
like sap ,six sigma methodology
in six sigma your failure level should be on six sigma level
means PPM per3.4
mapping ins ap
you have to design the process
so that you can getth resule at six sigma level
in my previous reply i indicate the sap palnt maintenance as example
you want more please revert back
manoj

Using link library with gcc

Hi,
I am trying to convert one of our existing 'C' applications to .swc file.
The 'C' code is huge library with ~ 891 '.c' files and 274 '.h' files.
Are we allowed to use shared library while running the gcc command.
Because when I used the following command in cygwin:
$ gcc -I. jaz.c ./jazxfbrs.dll -O3 -Wall -swc -o jaz.swc;
It gave me the the following message:- "llvm-gcc: ./jazxfbrs.dll: linker input file unused because linking not done"
Does that mean we are not allowed to use linked library for compilation, or is there any workaround.
Thanks for any suggestion on this,
-Yogen

That warning is negligible -- it is just because the gcc wrapper passes your arguments to both the compiling and linking subprocesses.
However, your application will fail at runtime if you try to access functionality from a platform dynamic library (such as a dll). Alchemy runs inside an actionscript virtual machine and has no way to access local dynamic libraries. You should link your code statically.

Using fragment library with SAP MIME repository?

Similar Messages

Maybe you are looking for