Using frame and channel API at the same time.

One of our customers specified the channel-mode number except programming the serial. So I have to use the channel api and the frame api at the the time! Is it possible with a 2 port PXI card like PXI-8461/2 (Port1 for channel api and port 2 for frame api)?

Yes, you can have one port for channel api and one port for frame api. But you cannot mix on one port.
DirkW

Similar Messages

[SOLVED] How to use timidity++ and other programs at the same time?

I have installed timidity following arch wiki instructions - I have soundfont, and I start it in /etc/rc.conf
It works properly with tuxguitar (and tuxguitar-alsa) or kmid, but I cannot play MIDI and - for example - oggs in amarok at the same time.
I suspect that the problem is that timidity doesn't use dmix alsa plugin I have made in my ~/.asoundrc.
The question is: how to tell timidity to use my dmix plugin?
Last edited by senjin (2007-11-19 19:53:50)

but they don't define "default" there, but "!default"...
anyway, I have already both "default" and "!default" defined exactly the same way:
pcm.!default
type plug
slave.pcm "dmixer"
pcm.default
type plug
slave.pcm "dmixer"
pcm.dmixer
type dmix
ipc_key 1024
slave
pcm "hw:0,0"
format "S32_LE"
channels 2
period_time 0
period_size 1024
buffer_size 4096
rate 44100
bindings
0 0
1 1
ctl.dmixer
type hw
card 0
pcm.w_y_h
type hw
card 0
device 0
pcm.what_you_hear
type plug
ttable.0.10 1 # digital mix left
ttable.1.11 1 # digital mix right
slave.pcm w_y_h
pcm.skype
type asym
playback.pcm "dmixer"
capture.pcm "skype_input"
pcm.skype_input
type dsnoop
ipc_key 2048
slave
pcm "hw:0,0"
period_time 0
buffer_time 0
period_size 1024
buffer_size 8192
rate 44100
and it doesn't work!
Last edited by senjin (2007-11-18 17:49:21)

Win 8 - How to use StereoMix and Headphones Mic at the same time?

I am using Windows 8 64 bit and believe I may have an IDT driver problem.
I need to enable StereoMix and my Headphones Mic at the same time. I know this was previously possible with windows xp and windows 7.
What happens is If I enable either Headphones Mic (Logitech headphones with Mic) or StereoMix the other one becomes " current;ly unavailable" I cannot get them both to work together. I can get StereoMix and the Internal Mic to work together ( both enabled at the same time) but the sound quality is bad because the internal mic picks up noises from the PC. I need to have both my headphones mic and stereo mix enabled at the same time.
The driver I'm using is the one provided by HP with the laptop. It is called sp59620.exe
Would another IDT driver solve the problem? Can you think of another reason this is not working?
Here are my specs.
System Manufacturer/Model Number HP Pavillion G7-2251dx
OS Windows 8 64 bit
CPU AMD A-8 4500M
Memory 8 Gigabytes DDR3 sdram
Graphics Card Discrete ATI Radeon HD 7640G with 2 Gigs
Sound Card IDT Audio
Monitor(s) Displays 17.3
Screen Resolution 1600x900
If you cannot help, where else should I look? i have tried Windows and Microsoft forums and no one can give me an answer.
Thank you.

I have tried the instructions in that video and I cant get passed the very bad feedback i get when telling my recording device to Listen. His secone instruction from his notes here
["Right Click the Realtech HD audio device and set as default if its not already.
(note you may want to turn off any powered speakers you may have to prevent feedback.)
-Select the Recording Tab at the top of the window.
-Select the Stereo Mix device and set it to default if its not already.
-Right click and select Properties.
-Select the Listen Tab at the top of the window.
-Change the drop-down box to the entry for USB headset and check the Listen to this device checkbox.
-click ok to dismiss the window.
-Right click on the USB headset microphone device and select properties.
-Select the Listen Tab at the top of the window.
-Change the drop-down box to the entry for the Realtech HD Audio device and check the Listen to this device checkbox.
-click ok to dismiss the window.
So, essentially, the game audio will play through the Realtec, your mic is also set to play to the Realtec. both audio streams are now part of Stereo Mix. Stereo Mix is being listened to by your headset allowing you to hear the game and your voice.]
~~~~~~~~~~~~~~~~~
Don't know about turning off any powered speakers.. the only speakers I have besides the headphones are the internal laptop speakers. I get the same feedback if i have the headphones plugged in or not.

Airport express: use internet and air tunes at the same time?

Hi,
I'd like to use and airport express to create a wirelss network (and so use the internet) AND stream music to my stereo with air tunes - at the same time. Is this possible? So far, I have been able to create a wireless network (and use the internet) OR use the airport express to play music. But whenever my internet works, itune can't find the base station - claiming it "can't be found on the network?"
Can you do both at once?
I'm connecting to an ethernet jack (I'm at a college). It's not a cable modem or DSL. Is this the problem?
Under "music" in the utility configuration. I've selected "Enable Air tunes at the base station." I can't select "Enable Airtunes over ethernet port." When i try to change the network options to allow me to select this "ethernet port" option, I have to tell it how to "distribute IP" addresses. i don't know how to do this, and everything I've tried destroys my internet connection.
I appreciat any help you have to offer. thanks
1.5 GHz PowerPC G4, 12'' powerbook Mac OS X (10.4.4)

solution:
My problem ended up being specific to the network I'm using. There is evidently another router on the ethernet system that was assigning my airport express an IP address (192. ...), rather than letting the network DCHP give me a direct IP address (something like 160. ...). The 192 address made it impossible for iTunes to see my express base station, but I was getting internet, passed through this other router.
The fix - and I'm not sure if this is totally kosher - was to manually enter a correct IP address for my base station. I got the IP address by seeing what this other router was sending my computer to get onto the internet. It gave me the correct router and a workable (160. ...) IP address. I'm not sure if I'm supposed to manually pick an IP address on the ethernet, but this one is working for the time being, and now iTunes can find my base station.

HP Docking (VB041AA) - Using DVI and Display Port at the same time

Hello,
is it supported to use the DV and the Display Port of a HP 90W Docking (VB041AA) at the same time? I use this setup with two LA2405wg and a 6450b for a couple of weeks and I encounter a couple of problems:
- flickering and switching during bootup, same output on both displays, no output
- hibernation resume fails, if notebook was hibernated undocked (hiberfil.sys corrupt)
- sometimes Win7 crashs during startup with corrupt drivers
- spooky display lockups were a display goes into standby and can't be switchec on or off. I have to pull the power cord
Some of them are really strange (corrupt drivers, but after a restart the notebooks starts without problems). During operation I don't have any problems, no BSoDs etc.
Thanks for advice.

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage, as this is the consumer support forums.
You can access the enterprise support forums at the following link.
http://goo.gl/LsnuK
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

USING TOMTOM AND IPOD FUNCTION AT THE SAME TIME

Hi
I plan to het tomtom application bur before I'd like to know if
I will be able to use my iphone connected to my car player alpine for music fucntions at the same time as tomtom application
thanks a lo for your opinion on that

On my iPhone, I can play music using the iPod app and also use Tom Tom. The music pauses for voice directions.
I don't have an Alpine, so I can't test that for you.

Can I Use HDMI and Thunderbolt Outputs At The Same Time? And Mac App Store Issues

I have a Mid-2011 Mac Mini. I am currently using the HDMI output with an HDMI to Digital Input for a dell monitor. If I wanted to have a second monitor, can I use the Thunderbolt output with a MiniDisplayport to VGA adapter? I know it may sound a little unclear, so if you need a clarification, pelase let me know.
Also, on the same macine, I am having trouble connecting to the Mac App Store. My internet connection is working, and I've tried going into the Keychain Access and there isn't anything with a blue plus. When I go to Store --> Sign In , the sign in widnow doesn't appear.
Thanks
Joey

Yes, that is exactly how to use dual monitors.
Optionally:
if the second monitor has DVI input, use the MiniDisplay Port to DVI adapter.
or if it has Display Port input, then all you need is a straight MiniDisplay Port to Display Port cable.
In Quick Links try Account if Sign In does not work.

Can I use "g" and "n" AXs at the same time for Airtunes?

Hi, hope someone can help with this.
I currently have a wireless "g" network made up of a Netgear DG834PN router handling DHCP and with wireless off, an AEBS "n" as a wirelss base station and 4 AXs (2 "g" and 2"n") doing extended wireless and airtunes to different rooms around the house.
If I use the Netgear for the "g" wifi and the AEBS for an "n" network and then set up the two "g" AXs on the "g" network and the two "n" AXs on the "n" network, but all still plugged into remote speakers will all the AXs still appear in my iTunes remote speaker list?
Also, will I still be able to control them all from the Remote app on my 1st gen iPod touch connected to the "g" network?
I seem to have built a bit of a monster here but it works fine as is. I'd just like to know if I can get a seperate "n" network going without losing any of my airtunes functionality.
Thanks

If I use the Netgear for the "g" wifi and the AEBS for an "n" network and then set up the two "g" AXs on the "g" network and the two "n" AXs on the "n" network, but all still plugged into remote speakers will all the AXs still appear in my iTunes remote speaker list?
Yes, just like any network resource they should be available.
Also, will I still be able to control them all from the Remote app on my 1st gen iPod touch connected to the "g" network?
The app on your iPod controls iTunes on your computer streaming the music, so yes you would be able to control them all because you are controlling iTunes.

When I use Premiere and After Effects at the same time, it causes my computer to restart. Why does it do that?

When I create a dynamic link to after effects it will work for a couple seconds, but then I get a black screen saying error and that I need to restart my computer. I can use the programs independently, but not together.

*** Panic Report ***
panic(cpu 4 caller 0xffffff8002c1a46e): Kernel trap at 0xffffff8002bd1f96, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffffbf40000028, CR3: 0x000000040ac56010, CR4: 0x00000000001627e0
RAX: 0xffffff7f80000000, RBX: 0xffffff8021b84100, RCX: 0xffffff7f80000028, RDX: 0x0000003fc0000000
RSP: 0xffffff81ed203cd0, RBP: 0xffffff81ed203d00, RSI: 0x000000004169e77f, RDI: 0xffffff8007fa2da8
R8: 0xffffff8022b77130, R9: 0xffffff81ed203e90, R10: 0x0000000000000001, R11: 0x0000000000000206
R12: 0xffffff8007fa2da8, R13: 0xffffff8006ec4000, R14: 0x0000000000038000, R15: 0xffffff802cf46b40
RFL: 0x0000000000010206, RIP: 0xffffff8002bd1f96, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffffbf40000028, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff81ed203980 : 0xffffff8002b2fe41
0xffffff81ed203a00 : 0xffffff8002c1a46e
0xffffff81ed203bc0 : 0xffffff8002c36683
0xffffff81ed203be0 : 0xffffff8002bd1f96
0xffffff81ed203d00 : 0xffffff8002b9cc0d
0xffffff81ed203f20 : 0xffffff8002c1a974
0xffffff81ed203fb0 : 0xffffff8002c36595
BSD process name corresponding to current thread: After Effects

Can i use bluetooth and standard headphones at the same time?

I would like to be able to use my bluetooth headset and have a line out of my iphone using the headphone output. is this possible? i seem to only be able to select one or another.
thanks

No, it's not possible... sound output is one or the other.

Can I use FaceTime and other apps at the same time

I want my kids to read a book using one ap while they talk to their grandma on FaceTime. Is there a way to do this?

No. Just talk to grandma. Read a book when she's not available.
 Cheers, Tom

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

Using join and batch reading in the same query

Hi,
I wonder if it is possible to use "Joining" and "batch reading" in the same query.
For example I Have
A -> 1-1 B
A -> 1-1 B
B -> 1-M C
This is the case where I have two separate 1-1 relationships to the same class B from A. Toplink 10.0.3 can manage it nicely through joining.
Now, I would like to read a set of As (with its 2 Bs) and all Cs for each B.
It seems that the following configuration does not work:
A -> 1-1 B (use joining)
A -> 1-1 B (use joining)
B -> 1-M C (Batch read)
Any help would be greatly appreciated
Tony.

James,
Would you be so kind to look at the following code?
Am I formulating it correctly to achieve my desired behavior?
Trip.class -> 1-1 PickupStop
Trip.class -> 1-1 DropoffStop
PickupStop and DropoffStop extend Stop and use same table (STOP)
Stop -> 1-M StopEvents
I would like to fetch all Trips, with their Stops and all StopEvents in 2 queries:
1. Trip joined with Stop
2. Batchread StopEvents
Code:
ReadAllQuery raq = new ReadAllQuery(Trip.class);
Expression qexp1 = new ExpressionBuilder();
Expression qexp2 = new ExpressionBuilder();
raq.addJoinedAttribute("pickupStop");
raq.addJoinedAttribute("dropoffStop");
raq.addBatchReadAttribute(qexp1.get("pickupStop").get("vStopEvents"));
raq.addBatchReadAttribute(qexp2.get("dropoffStop").get("vStopEvents"));

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong

When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?

- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

Using frame and channel API at the same time.

Similar Messages

Maybe you are looking for