Using FTP with Seagate BlackArmor NAS 440

Hey everyone - I need some help regarding OS X being able to log in with a drag and drop ability on my NAS using FTP.
I believe I have everything set up correctly, because I can log into my NAS at work on a PC using the ftp://user:[email protected] just fine.
However, if done with a mac, through safari, it just opens the folder for display. I cannot read/write to the NAS.
Also if I try to "connect to server" it gives me an error.
I also tried a 3rd party FTP application and that gave me errors as well (I believe it was 550 authentication errors?)
Like I said, I can do everything just fine with a PC, but as soon as I try it with a Mac it errors and won't connect.
Currently system is the 2013 15" MBP retina, my guitarist uses a 2011 13" MBP.
Both are running latest versions of OS X.
It would be nice to get this resolved as it would be much easier for transferring our recording projects back and forth and backing them up based on either system we are using.
Any suggestions would be great - thanks for your time!

Across the internet. Say we record a guitar track at his house, and then we can just upload it to the NAS.
Then when I am home I can add some synth tracks.. back and forth we can add parts.
I just tested it this morning to see if I could actually connect to it at work and (I use a PC at work)
I have no problems here at all drag/drop just fine. But trying to get him connected it fails.

Similar Messages

  • How to send multiple files in parallel using ftp with single connection

    Hi.
    i have written code for file upload manager using ftp..
    it perfectly working with sequence file uploading in single connection..
    And i tried to upload multiple files with parallel processing in a single connection.... but it is not working properly.. i also used thread concept
    but single file only transfered and connection refused...
    my code here...
    //////////////////// main class //////////////////////////////////////////
    ftp.connect();
    ftp.login();
    String [] archivos = new  String[100];
                                      File dir = new File("C:\\Files Uploading\\");
                                       archivos = dir.list();
                                       for (int s=0; s<archivos.length;s++)
         //Start Data Transfer Here
         new DataTransfer(archivos[s]).start();
                                       Thread.sleep(1000);
    /////////////////////// thread class ////////////////////////////////
    class DataTransfer extends Thread
          String FileName="";
          String LocalPath="",RemotePath="";
           public DataTransfer(String fname)
         FileName = fname;
         LocalPath = "C:\\Files Uploading\\" + FileName;
         RemotePath = FileName;
         System.out.println(LocalPath);          
            public void run()
                        System.out.println("DataTransfer Started");
         /File Transfer Here
         try
               FileInputStream input = new FileInputStream(LocalPath);
                               Ftp_Client.storeFile(RemotePath,input);
         System.out.println("Successfully sent : " + RemotePath);
         catch (Exception exc)
              System.out.println(exc.getMessage());
              System.out.println("DataTransfer Ended");
         }otherwise tell me any other alternate way

    And i tried to upload multiple files with
    parallel processing in a single connection....
    but it is not working properly.FTP isn't a multiplexing protocol. How could it work at all?

  • How to use FTP with Time Capsule Gen4

    I am having difficulty setting up FTP with my Time Capsule.  This is the first time I have attempted using FTP on the Time Casule and have read through some documentation and believe I have it set up correctly but could be wrong.  I am using FileZilla and tried to connect but the connection fails therefore my post for assistance.
    If someone could provide me the basics or links for installation/testing and etc.. I would very much appreciate it.  At this point I feel I just need to start over.
    Thanks,
    John

    Port forwarding for FTP is rather more complex than it first seems..
    Ports that need to be open depend on type of FTP.. ie active or passive.
    Read the discussion of ftp through NAT.
    http://slacksite.com/other/ftp.html
    Make sure the firewall on the computer that is running ftp is off.
    And I guess in the end.. if you have a different router give that a go.. it can help identify where the problem is.
    If you are using v6 airport utility.. opening ports is not at all easy either.. definitely recommend you install 5.6 utility.
    If you are still on lion just install it.. http://support.apple.com/kb/DL1482
    If you are on ML tell us as there are ways and means.

  • Using MBP with Seagate GoFlex HDD?

    Hello, I bought a new MBP with retina screen yesterday and need to hook it to my Seagate FreeAgent GoFlex exterior HDD. The laptop has no firewire port of course, so should I purchase a Thunderbolt cable to lash them together successfully?
    Thanks much!

    Across the internet. Say we record a guitar track at his house, and then we can just upload it to the NAS.
    Then when I am home I can add some synth tracks.. back and forth we can add parts.
    I just tested it this morning to see if I could actually connect to it at work and (I use a PC at work)
    I have no problems here at all drag/drop just fine. But trying to get him connected it fails.

  • Using FTP with Content DB ni Webcenter Suite

    Hi All,
    Is it possible to use the FTP protocol in ContentDB version 10.1.3.2 (The one in WebCenter Suite) ?
    I'd like to upload files and folders with BPEL 10.1.3.1 into this ContentDB.
    I am not able to find the FtpServerConfiguration in the ApplicationServerControl.
    Thanx in advance.
    Regards
    Jørn

    Charu,
    I found the solution, but not how I wanted it.
    It is explained to me that the 10.1.3.2 Webcenter version contains a "stripped" ContentDB version. And as you can imagine FTP is one of thos stripped parts, thus not available in this one.
    Therefor I took the step back and installed the seperate ContentDB 10.2.0
    With this everything worked fine.
    Sorry for the probably disappointing answer ;)
    Regards
    Jørn

  • Trouble using ftp with utf8

    hi,
    i've got a problem since i use my new notebook (windows 8.1, 64 bit) for ftp sessions. i am not able to edit, up- or download files with umlauts (e.g. "ü, "ä") in file name. i tried 3 ftp-clients (winscp, filezilla, fireftp). in each of them
    i checked the option to use the encoding utf8, but it doesn't work. i also tried everything after changing the ftp mode from passive into active in internet explorer. same result. maybe it's important to say, that i firestly made an update from windows 8 to
    8.1 before i used the notebook. does anyone have a solution?

    It seems that this is designed by default.
    The Windows built-in FTP service doesn't support utf8.

  • Is Photosmart​8250 compatible with Seagate BlackArmor NAS110?

    I am interested in purchasing a Seagate NAS110 network drive. It "appears" to support USB printers through a LAN. I am concerned that the HP drivers might not be compatible with that kind of system. Does any one have any insight into the process? Has anyone had success doing this before?

    Ok, I can print a text file (.txt) but not a Rich Text Format (.rtf) nor a web page from my PC to the NAS attached printer.

  • Difficulties Using iTunes With External Drive (NAS)

    Hello,
    I apologize if this question has already been asked (and answered) but I was unable to locate an answer with a search.
    I am working on a PC with Windows 7. I have two iTunes libraries in separate user locations: one is a collection of MP3 files (for my iPod) and another—in a separate user log-on called Lossless—consists of all my lossless codec music files.
    When I transferred the lossless codec files from the hard drive on my computer to a Network Attached Storage (NAS) connected by a hard-wired router (designated “Z:”), I configured iTunes to locate the files under “Z:/Music”.
    Here’s the glitch: Although iTunes is finding “Z:/Music”, the iTunes program reports: “The song __ cannot be played because the original file could not be found. Would you like to locate it?”
    Here’s the question: Even though I have iTunes correctly (I believe) pointed to reading the NAS (my “Z:/Music” drive) why is iTunes unable to read the file and play the music?
    Any advice and suggestions would be most welcome.
    Many thanks.
    Jazz4Ever

    Barging in,b noir - I don't think it has anything to do with being on a NAS drive. It's the way the files were moved.
    +When I transferred the lossless codec files from the hard drive on my computer to a Network Attached Storage (NAS) connected by a hard-wired router (designated “Z:”), I configured iTunes to locate the files under “Z:/Music”.+
    +Here’s the glitch: Although iTunes is finding “Z:/Music”, the iTunes program reports: “The song __ cannot be played because the original file could not be found. Would you like to locate it?”+
    If you just move files in Windows Explorer, itunes loses the paths.
    Configuring iTunes to locate the files under “Z:/Music” only affects FUTURE additions-it doesn't change all the paths on whatever is already in your library, which is what most people expect to happen when they change that preference setting.
    You needed to run the consolidate command on your lossless library.
    Here is a good background article from iLounge on that:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/
    Move everything back the way it was and run the consolidate.
    Or, if you don't care about ratings, playcounts, etc....just make a new lossless library and add your Z: lossless files to it.

  • Help Downloading a file from a server using FTP with only URL methods

    Hi All
    I have written this code and it is not working I dod not know why the download is not working please help is there anything that's missing?
    * Download the file
    public void download(String fileName, String destination)
           BufferedInputStream bis = null;
           BufferedOutputStream bos = null;
          // File destDir = null;
           try
               String urlString = "ftp://"+userName+":"+password+"@"+hostName+"/"+fileName;
               URL url = new URL(urlString);
               URLConnection conn = url.openConnection();
               conn.setDoOutput(true);
         conn.setDoInput(true);
               conn.connect();
           //set the destination directory
           File destDir = new File("U:\\2004\\"+fileName.trim());
            System.out.print("\n\n");
            System.out.print("Destination set to :" +destDir);
            System.out.print("\n\n");
              bis = new BufferedInputStream( conn.getInputStream() );
              bos = new BufferedOutputStream( new FileOutputStream(destDir.getName()));
              System.out.print("get file name :" +destDir.getName());
              System.out.print("\n\n");
              int i;
              while ((i = bis.read()) != -1)
                 bos.write( i );
              System.out.println("Trying to download...");
              bis.close();
              bos.close();
           catch (IOException ie)
         System.out.println( "Input not available" );
    This is what I get after runing this code.
    get umlcourse.txt U:\2004
    Destination set to :U:\2004\umlcourse.txt
    get file name :umlcourse.txtTrying to download...

    AceV wrote:
         String urlString = "ftp://"+userName+":"+password+"@"+hostName+"/"+fileName;
    You probably need to specify the transfer mode. For example:
    String url = "ftp://sam:spade@ftphost/myfile.txt;type=a";
    // Specify type=i for binary.

  • Posting a File with Date Time using FTP in a BPM scenario

    Hi All,
      I have got a following requirement within the BPM ::-
    Step 1: We receive a file from an external system using FTPS with File Content Conversion Mode. The file is a comma separated file.
    Step 2 : We need to write the same file without any changes in data elements to another File System. The file to be written will be comma separated.
    Step 3 : The data will be mapped to an RFC and there will be a RFC Call to the ECC system.
    Step 4 : On successful call to RFC, the file will be dumped into the SAP File system also.
    The issue here is in Step 2. The additional requirement for Step 2 is to name the file with the following convention -
    ABCDEF_<Date in MMDDYYYY>_<Time in HHMMSS>_<Time in ms>_data.txt
    Can you help me on how to configure this from within the BPM ? I have seen blogs and replies in forum on using UDF's for the same. I am not sure on how to do this in BPM.
    Please help !!!
    Thanks,
    Amit

    Hi,
    I dont think you required BPM in this case,you can achieve this requirement using Multi mapping.
    3 Receive comunication channels
    1)to send file to receive File directory9Content conversion required)
    2)RFC Receiver Communication channel to make a cal to SAP ECC to send RFC..
    3)One more File communication channel to send data to SAP File System.
    refer below blog.
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    Regarding r file name use dynam ic configuration UDF or ASMA to chnage file name format to your desired format,if you decided to use UDF then map root nod of receiver file structure in multimapping.
    Regards,
    Raj

  • SSIS 2005 FTP with PPK

    Hello. I would like to automate sending an Excel file to a vendor FTP site with SSIS 2005.  I can see how to use ftp with user name and password options.  However, the twist here is that the vendor says that I need to incorporate a ppk key for
    security reasons. The problem is that I am not finding this on the ftp task bar in the SSIS GUI. Before I get into the weeds on how to set this up, the first question I'm asking is if this can actually be done in SSIS 2005?
    Thanks in advance for comments.
    Brian

    Hi Brian,
    not by using the stock FTP Task. It only is a wrapper around the command line FTP client.
    If you are able to code then it will be a Script Task with some VB or C#, but may be that then defeats the merits of using SSIS
    Arthur My Blog

  • Seagate Black Armor NAS 440 / 420 with Apple OSX 10.5.8-10.6 is a BAD IDEA!

    Heads up to Apple users. We purchased a Seagate Black Armor NAS 440 for use with a multi user environment and found it was incompatible with any 10.5.8 or 10.6 OSX users. This fact was confirmed by Seagate Tier 2 or "Very Hard Problem" (they call it this not me) support office.
    We confirmed the tech specs as published by Seagate and unfortunately the development of this product was timed prior to 10.5.8 and 10.6 and has yet to be patched.
    After migrating 6 TB of data we discovered the issue, and had to rollback. If Seagate had published the correct tech specs we could have avoided wasting 2 days of work and inconveniencing our users.
    Bottom line save yourself the trouble, and do not buy a Seagate NAS if your running OSX in your environment.

    Have to agree. And it would take a simple fix (according to the linux/unix geeks on the forums) which seagate doesn't see viable enough to implement. Most of what I read says go WD.

  • Time Machine does not work with Seagate NAS 110

    I have been trying to configure time machine to automatically back-up a Macbook Pro to my Seagate NAS 110 to no avail. I have the latest version of OSX Lion running on my Macbook as well as the latest firmware update on my NAS device which was designed to erradicate the very problem I am experiencing now. It would be greatly appreciated if anyone was able to point me in the right direction. Thanks in advance!

    NJayasinghe wrote:
    Here is the link where it specifically states 'Fix for Mac OS Lion Time Machine compatibility'.
    http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=ba-nas-110&vgnextoid=174 af1ec4d173210VgnVCM1000001a48090aRCRD
    I hadn't found that.  Unfortunately, there's no date on it, and no mention of Lion.  One would assume that's what it means, but some makers have simply abandonded some of their old products.
    I was hoping that somebody on this forum has been experiencing the same issues as I have and found a solution to the problem.
    It doesn't look like many are using it on Macs.   Yours is the only post found in the Apple forums containing Seagate Blackarmour NAS 110.
    Searching for Seagate NAS 110 does get some hits, but none with resolutions:
    https://discussions.apple.com/search.jspa?start=0&q=Seagate%20NAS%20110&peopleEn abled=true&dateRange=all&rankBy=relevance
    Sorry not to have any better news. 

  • Re: Problem with transferring of data to non sap by using FTP funtion modul

    Hi all,
             I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
    like FTP_CONNECT
    FTP_COMMAND
    FTP_R3_TO_CLIENT
    FTP_DISCONNECT
    But text file details are coming like this
    means even line items are all displaying in one row.means continously all line items are coming just like this.
    0001000264,070914,,,1000,Steel (pune) Plant,
    Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
    Actually here problem is text file data is continously coming with ','
    means actually those values has to come as
             0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
            0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
    How to split those records when sending the text file.
    This is very big issue.I am unable to complete this issue.
    Please if any one knows the solution please guide me.
    please help me.
    Thanks & Regards,
    J.Goud

    Hi all,
             I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
    like FTP_CONNECT
    FTP_COMMAND
    FTP_R3_TO_CLIENT
    FTP_DISCONNECT
    But text file details are coming like this
    means even line items are all displaying in one row.means continously all line items are coming just like this.
    0001000264,070914,,,1000,Steel (pune) Plant,
    Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
    Actually here problem is text file data is continously coming with ','
    means actually those values has to come as
             0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
            0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
    How to split those records when sending the text file.
    This is very big issue.I am unable to complete this issue.
    Please if any one knows the solution please guide me.
    please help me.
    Thanks & Regards,
    J.Goud

  • Problem with transferring of data to non sap by using FTP funtion modul

    Hi all,
             I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
    like FTP_CONNECT
    FTP_COMMAND
    FTP_R3_TO_CLIENT
    FTP_DISCONNECT
    But text file details are coming like this
    means even line items are all displaying in one row.means continously all line items are coming just like this.
    0001000264,070914,,,1000,Steel (pune) Plant,
    Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
    Actually here problem is text file data is continously coming with ','
    means actually those values has to come as
             0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
            0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
    How to split those records when sending the text file.
    This is very big issue.I am unable to complete this issue.
    Please if any one knows the solution please guide me.
    please help me.
    Thanks & Regards,
    J.Goud

    Hi,
         Thanks for reply.
    Hi all,
                My problem was solved.But I have used GUI_DOWNLOAD.
        But i want to place the file name with increasing order number.
    Just like suppose 1st i am placing file name as  PO000051.txt
    next time the file name has to be placed with increasing order like PO000052.txt
    I am generating the number in my program actually i am using like this.If i keep file name as
    190.0.18.65\qdls\ITGSAP_P\PO000052.txt means only it will place only that file how to increment that number. i am not getting.
    If i am keeping
    190.0.18.65\qdls\ITGSAP_P\g_file   like this means file is not placing.
    pls help me if any one knows solution.
      CALL FUNCTION 'GUI_DOWNLOAD'
           EXPORTING
              BIN_FILESIZE        = ' '
              CODEPAGE            = ' '
                FILENAME            = '
    190.0.18.65\qdls\ITGSAP_P\g_file'
              FILETYPE            = ' '
              MODE                = ' '
              WK1_N_FORMAT        = ' '
              WK1_N_SIZE          = ' '
              WK1_T_FORMAT        = ' '
              WK1_T_SIZE          = ' '
              COL_SELECT          = ' '
              COL_SELECTMASK      = ' '
          importing
               filelength          =
           TABLES
                DATA_TAB            = ist_file
              FIELDNAMES          =
           EXCEPTIONS
                FILE_OPEN_ERROR     = 1
                FILE_WRITE_ERROR    = 2
                INVALID_FILESIZE    = 3
                INVALID_TABLE_WIDTH = 4
                INVALID_TYPE        = 5
                NO_BATCH            = 6
                UNKNOWN_ERROR       = 7
                OTHERS              = 8.
    Regards,
    j.Goud

Maybe you are looking for