Using full filename (with extension) as Title

I would like iPhoto (iPhoto '11 version 9.1.1) to display the full file name including the extension (e.g., _DSC0003.jpg, _DSC003.nef) as the Title that iPhoto uses so that I can differentiate while browsing.
My Nikon D200 offers the option of saving the exposure as Basic + RAW and when taken saves as both a .jpg and .nef file so when imported into iPhoto the thumbnails have the same title. I would like to modify this behavior or Batch change the Titles.
Any solutions?
Thanks

There isn't.
Some possibilities:
1. Use Smart Albums to differentiate them: the Photo -> is -> Raw condition will help there. Then a Batch Change command will allow you to re-title as you wish
2. iPhoto automatically tags each Raw on import, so you can use the Keywords in the Inspector
3. As iPhoto makes a jpeg preview of your Nefs on import anyway, why shoot Raw+Jpg?
Regards
TD

Similar Messages

  • How can use full app with multiple monitor

    in Lion and Mountain Lion
    when i use Multiple Monitors and move any app in full-screen mode
    its become in one monitor and other monitor become blank
    but it seems usefull that other monitor show another app in fullscreen mode
    how can i do this ?
    and sorry for my bad english!!

    Sorry to say, but it is designed to work that way.
    The only way around it that I know of is, not to use full-screen but just fill the screen with the application that you are using.
    A

  • Rmbp crushes when using  full screen with Aperture

    I already updated my rmbp to Mountain Lion and updated my Aperture with the latest version.
    My rmbp crushes in full screen after I use the Quick Brushes tool. My rmbp shows a message in four languages and restarts...
    But if I don't use full screen everything is ok...

    The message in four languages indicates a "kernal panic".  These crashes are system wide, and should be avoided.
    Unfortunately, that's all I can offer.  You might search for "Aperture full screen kernal panic".  As this seems to be repeatable, you should submit a bug report to Apple via "Aperture➞Provide Aperture feedback".
    One small thing: does it happen with no external devices attached (second monitor, mouse, etc.)?

  • Organizer does not show filename and extension viewing photo

    Windows 7
    Photoshop Elements 8
    I previously had Photoshop Elements 8 on a computer with Windows XP that died. My photos, thankfully, were on an external hard drive. My new computer has Windows 7. I installed Photoshop Elements 8 on it and imported my photos.
    Previously when viewing a photo in Organizer in the largest size obtainable by clicking on the thumbnail, the photo would show tags and the filename with extension. Now, It does not show the filename and I have to click properties and get the little window that opens to show me the name. I couldn't find anything in preferences to set the filename option. Can someone please tell me how to do it?
    Thanks, Eva

    Hi,
    Under the View menu, ensure that Details & Show file names are both checked
    Brian

  • IMac Computer using 10.7.5, running iTunes 11.1.5, and using an iPad 2 with os 7.1 .  I have over 300 movies in my library and when I share using video on the iPad, the titles covers are all on the wrong movies.  How do I fix this?

    iMac Computer using 10.7.5, running iTunes 11.1.5, and using an iPad 2 with os 7.1 .  I have over 300 movies in my library and when I share using video on the iPad, the titles covers are all on the wrong movies.  How do I fix this?

    Hi Michael,
    I'm glad iTunes is working now!  If you want to locate iTunes plug-ins on your computer, you can find them in the following locations (you may not have the iTunes Plug-ins folder if you do not have plug-ins):
    Mac:
    /Users/username/Library/iTunes/iTunes Plug-ins/
    /Library/iTunes/iTunes Plug-ins/
    One thing I also wanted to mention is that the "Users/username/Library" is hidden in Lion and Mountain Lion.  You can access it using these steps:
    OS X Mountain Lion: What is the Library folder?
    The Library folder contains files used by OS X and your apps, including your personal fonts and preferences. The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
    You can find the full article here:
    OS X Mountain Lion: What is the Library folder?
    http://support.apple.com/kb/PH11395
    All the best,
    Sheila M.

  • CUCM users dialling inter-site using full PSTN numbers rather than extensions

    Hi All,
    We have an issue where users on one site are calling other sites using full PSTN DID numbers rather than internal extensions (and therefore incurring a call charge).  Once all reasonable attempts at educating users and encouraging them to use directories have been exhausted is there any other way to minimize this apart from creating translation patterns like 91231xxx --> 1xxx?  We have done this in the past and lived with the caveats (like it making dialling around IP difficult if there were WAN issues / site in SRST unless you configure call forward unregistered). 
    I could swear there was a new feature in 10.x which could look at user's other numbers in the directory (eg. mobile, home number etc.) and replace the called number with the internal extensions.  Maybe I was dreaming though :-)
    Anyone know if this is a feature?  I've tried searching for it but not come up with much.
    Thanks,
    Jonathan

    Thanks Jamie, that might just do the trick!
    Found the new feature I was thinking of - 'Directory Number Alias Lookup and Sync Setup':
    The Directory Number Alias Lookup and Sync setup enables you to route the commercial calls to an alternate number. Routing the commercial calls to an alternate number reduces the commercial cost of calling an external number. You must configure the LDAP server for Directory Number Alias Sync (sync server) if you need to synchronize users from Cisco Unified Communications Manager database to the sync server. You must configure the LDAP server for Directory Number Alias Lookup (lookup server) if you need to route the commercial calls to an alternate number.
    I don't think it's quite as easy as I was hoping though.
    Sad to say I have dreamt about CUCM / number manipulation in the middle of some more complex projects...
    Thanks,
    Jonathan

  • Full page prints from iPhone but not from iPad using photo app with AirPrint ?

    Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

    I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

  • How to modify Fileadapter filename with val from JMS msg using xsl?

    In my case I need to name the file based on information received in a JMS message.
    I would like to receive an xml document from a JMS queue, the document will contain content as well as the name of a file to be saved off. I found references to something similar in the BPEL and ESB documentation for the file adapter by using "ehdr:setOutboundHeader(" as a means to set the outbound header value but I cannot find the mechanics of how to accomplish getting that set with a value that is selected from an incoming message in XSL code.
    The examples shown indicate the creation of a pass through mechanism that would take a message from a request header and pass it along to the outbound header which is great but I need a snippet of code to get me through setting the outbound header with an element value that is sourced from the inbound message.
    I also found an incomplete reference in a "Oracle SOA Suite Enterprise Server Bus" powerpoint presentation that indicates JMS custom properties support for "Property[@name="Country"]/@value" but no details were provided to assist further.
    I would greatly appreciate any information you can provide.
    Thank You,
    John

    Ok I was able to get fileadapter filenames modified.
    First you cannot do this after a dbadapter query as that functionality seems to be broken. The best way to solve it for me was to simplify the problem, I started with placing the setoutbound header data after reading a simple file and ignoring the files content altogether. I do the set inside a match of the xslt using a constant value, again for simplicity. For the test just put in 'ateststring.txt' in the setoutbound header call, no need to select data from the document at this point; we will get to that. Now get that to work.
    Once you have that working take a value from the incoming document and select it into a variable named myvariable then replace the 'ateststring.txt' with $myvariable. So basically its a three step process for the final solution. Select the data of interest from the document into a variable. add a select statement to make the method call just after that. Make the method call inside the select statement and prepend the variable name with the $ symbol.
    So far I have only tested this file to file and file to ftp, I suspect that jmsadapter to file will work fine too. So the trick for me was to understand that if an incoming document is the result of a query that just wont do. My requirement was to take an input JMS request, use that to drive a query, take the data from the query and write it to a filename as defined in the JMS request. No matter what I did to set the frustrating fileadapter/ftpadapter filename in the header I was unable to do so. I used constant strings etc in every part of the document ( before select, inside select, outside select etc ). It wasnt until I went file to file that I was able to get this to work at all. And then not in the xslt header etc, it MUST be in an area of the document that resulted in a select match, which after review makes sense.
    To work around the query to file issue, I place the results of the data query into a temporary filename%SEQ%.tmp, along with the query results I add the real filename inside the document. I have a file listener that listens for the filename using wildcards filename*.tmp, it takes the file reads it in, pulls the permanent filename from the incoming document, and sets that filename in the header using the steps worked out above by selecting the filename into myvariable.
    You cannot ( to my knowlege ) store variables in ESB so I found I had to put them inside the documents to move the data around. When I am all done with the work through the routing service I strip out the variable data fields that I needed to carry along with the data.
    I hope this saves someone else a bit of frustration!
    John

  • Is Extension Builder 2.1 using Flash compatible with Photoshop CC also in the future? (There are speculations, that it will be switched off, what will destroy my investment in that code)

    I have codes a lot of stuff using Extension Builder 2.1 using Flash technology to be compatible with Photoshop CS6 and Photoshop CC.
    There are speculations, that the support for this would be removed in Photoshop CC. This would destroy my investment in this code and my customers would not be able to use my products anymore, when they are using Photoshop CC.
    Is there any workaround planed for customers using Photoshop CC to be able to run extension build with Extension Builder 2.1 and Flashbuilder 2.6 also in the future?

    Can you supply a link?

  • TS2634 When will the Apple stores carry 30 pin dock extensions or cables so I can use my iPad with a recessed iPod dock? It's unfortunate that the device is rendered unusable.

    When will the Apple stores carry 30 pin dock extensions or cables so I can use my iPad with a recessed iPod dock? It's unfortunate that the device is rendered unusable.

    No one here is an employee or representative of Apple. We are all users like yourself. We cannot know when or if Apple will release any additional products.
    You can leave feedback to Apple about the iPad here:
    http://www.apple.com/feedback/ipad.html

  • When to use abstract classes instead of interfaces with extension methods in C#?

    "Abstract class" and "interface" are similar concepts, with interface being the more abstract of the two. One differentiating factor is that abstract classes provide method implementations for derived classes when needed. In C#, however,
    this differentiating factor has been reduced by the recent introduction of extension methods, which enable implementations to be provided for interface methods. Another differentiating factor is that a class can inherit only one abstract class (i.e., there
    is no multiple inheritance), but it can implement multiple interfaces. This makes interfaces less restrictive and more flexible. So, in C#, when should we use abstract classes
    instead of interfaces with extension methods?
    A notable example of the interface + extension method model is LINQ, where query functionality is provided for any type that implements IEnumerable via
    a multitude of extension methods.

    Hi
    Well I believe Interfaces have more uses in software design. You could decouple your component implementing against interfaces so that
    you have more flexibility on changing your code with less risk. Like Inversion of Control patterns where you can use interfaces and then when you decide you can change the concrete implementation that you want to use. Or other uses for interfaces is you could
    use Interceptors using interfaces (Unity
    Interceptor) to do different things where not all of these is feasible or at least as straightforward using abstract classes.
    Regards
    Aram

  • Can I use iphone earbuds with a mac pro tower? And with an extension cord?

    I also need to use an extension cable because of my standing desk (tower is on the floor). I get confused with the 2-band jack, the 3-band jack, etc. I haven't been successful using a regular, radio shack type of headphone extension cord. Salesmen give me a blank stare when I try to explain that I have iphone earbuds with a 3-band jack and that it doesn't work with a regular extension cord. It's like I'm speaking Swahili.

    You can't using 4-band iPhone earphone with Mac Pro.
    You need to get 3-band earphone and extension cable.
    I've been using iPod shuffle's earphone with extension cable osn it works well.
    http://www.amazon.com/iMBAPrice-iMBA-PS-12MF-12-Feet-Plated-Extension/dp/B009UEB UZQ/ref=sr_1_5?s=electronics&ie=UTF8&qid=1382758521&sr=1-5

  • TS1926 "Monitors cannot be used bcz a required extension, System Monitor Plugins, is disabled or not installed. Make sure System Monitor Plugins is in the Extensions folder in the System folder then restart your computer" Anyone have experience with this

    "Monitors cannot be used bcz a required extension, System Monitor Plugins, is disabled or not installed. Make sure System Monitor Plugins is in the Extensions folder in the System folder then restart your computer" Anyone have experience with this issue?

    Try this app: http://tyorex.com/iWorkConverter
    Batch convert Pages files to doc and pdf.

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • How to dial phone number with extension using phoneCallTask ?

    Hi,
    Can we dial phone number with extension ?
    I mean suppose if there is auto answering machine where we need to dial some extension number after the beep, can we provide it with phoneCallTask.PhoneNumber
    property like we can do it in iphone ?
    Thanks & Regards,
    Anurag

    Hi Anurag:
    Unfortunately Window Phone doesnt provide the option to dial extension. But you can do it manually. After the call is made by clicking on Dial-er and manually inputting the extension.

Maybe you are looking for