Using fullscreen on my first monitor makes the other one gray
So when I go into fullscreen on my first monitor, the other one becomes gray (like the Mac OS X login screen, almost like this: http://fc02.deviantart.net/fs71/i/2011/183/2/e/linen_desktop_shaded_by_tbg10101- d3ksrb5.png).
It happens when i click the http://gyazo.com/e9d8ec2ecff4828a8465368de564ebcb small 2 arrows button on the top right of the window, and it also happens when I open some fullscreen programs. The only things this doesn't happen on and I still can click on stuff and do stuff on the other screen is League of Legends, fullscreen on Video players in Google Chrome and Safari (like youtube.com, twitch.tv etc)... ( By the way when i go into fullscreen on youtube or twitch in Safari and i click on my second motor the Dock and a white list on the top comes up on the full screened monitor (the one with Safari), this is very annoying and should eb fixed.)
How can i fix this problem with the gray screen on second monitor tho? This problem kinda ruins the purpose why you should have a second monitor...
Thanks for the help
Hello Kladdy
Check the settings In System Preferences to make sure that Displays have separate Spaces and that should make it to where when you go full screen, it will not be a blank window.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Regards,
-Norm G.
Similar Messages
-
I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?
Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?
When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath. -
I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.Drag the file into the audio window in the Document inspector...
-
I want to use system and job variables to make the information dynamic in the Email Subject Line
Someone could mention the subject line character limitation needs to be expanded. 50 chars is not much to work with!
Is it possible to make SUBJECT Line to make , use system and job variables to make the information dynamic , Right now there is a limit for Characters in the Subject line ... is it possible to expand ???I've encountered the same issue and worked around it by using generic variables that would always be the same for a certain email alert. eg = "System XYZ -source file delay for :"
So a sample subject would then be:
Where ENV = DEV/UAT etc.
This functionality allows you to use generic alert templates for all filewait jobs, and just filling in the variables.
A slight problem is that although this works very well, the use of group variables in email / alert actions is (/ wasn't) officially supported by Cisco when I last ran it past then. Cisco, any update in this? -
My MacBook Pro died, but have a TimeMachine backup. I've bought a new one. How do I make the new one just like the old without affecting the OS on the new one?
ppauley wrote:
My MacBook Pro died, but have a TimeMachine backup. I've bought a new one. How do I make the new one just like the old without affecting the OS on the new one?
One you start up the new one for the first time, Setup Assistant starts and offers you the option of migrating your old Mac to your new Mac with Time Machine, among other choices, as the source. You can also use Migration Assistant (in the Utilities Folder) to do the same thing. -
Hello. I made a partition a while back for Yosemite. Now, I have two partitions. The Yosemite one and the other one that I made smaller and changed the name to Erase so that its easier. I need more space on my Yosemite one. How can I Make the Yosemite Partition have all of the memory. I hate that I know I have like 900 gigs lurking around my iMac that I can never use. Please help. Apple....somebody....
Erase the large partition. Clone the small volume to the large volume. Boot from the large volume. Delete the small volume then extend the large volume to the full size of the disk.
Drive Erase for Mavericks, Lion/Mountain Lion
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select the volume you wish to erase from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select the destination volume from the left side list.
2. Click on the Restore tab in the DU main window.
3. Select the destination volume from the left side list and drag it
to the Destination entry field.
4. Select the source volume from the left side list and drag it to
the Source entry field.
5. Double-check you got it right, then click on the Restore button.
Destination means the large volume. Source means the small volume.
When you finish select the Startup Disk from the Apple menu. Set the top volume as your startup volume. Click on the Restart button. -
How do u keep you iPad Air and you iphone5 appointments link together after the first setup so u can enter the appointment on one it will go to the other one.
Use iCloud to keep them in sync.
Do you have an iCloud account? -
Separate first column from the others
Hi,
how can I separate the first column from the others in a way that it does not scroll out of the active window? I.o.w., I want column B, C, D.... to slip "under" A.
I got a "Names" list (column A), and in the following columns lots of stuff, and when I scroll to the right / to the last column, the Names are out of the window.
Thanks a lot!
PeterHi Peter,
That was I that provided that answer. Freeze Rows, Freeze Columns doesn't break a column or row from the table it allows the remaining rows or columns to scroll under it.
Here's the trick, the spreadsheet grid must be longer or higher than the boarder of Numbers program. In other words you cannot see the lower right or upper right of the far end of the spreadsheet. It's past the boarder. Then when you scroll it will slide right. Make the Grid out to column Y. Now make the program smaller in size. Now lock a column then as you move from cell to a cell farther right the columns will scroll left until you come to the end of the grid—in this example column Y.
Truly I hope that makes sense for you. I reread it, it confused me. It takes a few seconds to visually show it but, longer to explain. Think of tying a tie, bam it's tied now walk someone through tying it.
Cordially,
RicD -
I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.
Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).
-
Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)
Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini -
hi guys i added a new mail account and now she i click new mail i can see 4 accounts, the first is right below the subject, and it' the old one and the new one, the other one is on its right and it's the old one and the new one. is it normal? Thanks.
sorry, correction,
hi guys i added a new mail account and now if i click new message on the mail field i can see 4 accounts, the first is right below the subject, and it' the old one and the new one, the other one is on its right and it's the old one and the new one. is it normal? Thanks. -
Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.
or is there a way to upload the digital copy to store in my iCloud account?
-
When I set up my iMac I used one of two iTunes accounts I have, I now need to change it to the other one......any ideas?! Thanks in advance
Hi Pompey Woody,
Thanks for visiting Apple Support Communities.
If you need to use a different Apple ID (iTunes Store account) with iTunes on your Mac, you can sign out and then back in with the other account:
Open iTunes. ...select Store > Sign Out, then select Store > Sign In and enter your current Apple ID.
These steps are found in this article:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
You may also find the information in this article helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Best,
Jeremy -
MAC Mail: I have 2 accounts set up. I used to be able to add attachments to both accounts, but now I can only attach using 1 of the accounts. The other one doesn't work.
Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.
Maybe you are looking for
-
Verification problem with BB Curve 9320
Hi - when I try to access my emails on my BB I get a message that it is an invalid account. How can I get over this and get my email working again? Thanks
-
Weird doubles in "on enterFrame"
I have striped my projects in order to nail down a problem to the bare 1 movie script with: on enterFrame put _movie.frame end enterFrame And for some weird reason, I consistently get doubles like this in the Msg window: -- 1 -- 1 -- 2 -- 2 -- 3 --
-
Is the Wild card search option availble in flex.
-
Application Server performance issues
I am a DBA consultant at a county government site that recently went live on FSCM 9.1 using Tools 8.53.04 Running Windows Server with MS-SQL Server 2012 A problem has started with our two Prod App Servers. There are a few hundred Accounting users on
-
IMac not seeing my Airport Extreme
How do I get my iMac to see and connect wirelessly to my Airport Extreme? When I turn on Airport on my iMac (PowerPC G5) it does not see my Airport Extreme that is in the same room. It sees the wireless networks of my neighbours. My work PC laptop se