Using functions in default-field in wizzards
Hi there,
I tried to build a table in the database section of the portal with the primary key being a 'number'. Into the default-field I put the statement: SELECT <owner>.<sequence>.NEXTVAL FROM DUAL (the sequence I had defined before). This statement worked fine in the forms-wizzard. In the table-wizzard the system came up with an error message, saying the datatypes of column and default-value don't match. I then put the SELECT-statement into a function and tried to call it with #<owner>.<function-name>. Same result. What did I do wrong?
cheers, Reinhard
Sorry, I used the tag-brackets by mistake.
The SELECT-Statement ist supposed to read: SELECT owner.sequence.NEXTVAL FROM DUAL
The function should be:
#owner.function-name
Hope somebody can help me.
Thanks, reinhard
Similar Messages
-
ABAP code which will use function module during field mapping in LSMW
Hi,
During field mapping in LSMW, for one of the field called field, I want to use a function module 'QF05_RANDOM_INTEGER', which will generate random numbers and map that random number to that field.
How do I write ABAP code which uses function module, during filed mapping for a particluar field in LSMW ?
Please help...
Regards,
Tushar.Hi Tushar,
You can write in FORM ROUTINE and LSMW.
I hope you know how to write ABAP code at field level.
If not ...
Come to change mode->select the field->Rule->ABAP Code
write a perform statement in ABAP code at field level.
<b>PERFORM test</b> using val
changing valu.
Go to Utilities(at menu)->switch layout-> extras ->select Layout->check Form routine-> it will display a FORM Routine... at bottom
this is the place where you can write some code for
<b> FORM test</b> using value
changing value1
FM call....
.ENDFORM
Get the value1 returned and use for the Field population.
Reward points if this Helps.
Manish
Message was edited by:
Manish Kumar -
Error with quantity field:Datasource Creation Using Function Module method
Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PMHi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet -
Using AGO function in calculated fields in Analysis
Oracle BI 11g.
Hi!
I have time-hierarchy and try to use function Ago in calculated fields. I created Analysis and add columns Year, Revenue, Revenue (1 year ago). In formula of column "Revenue (1 year ago)" I wrote:
AGO("Sales"."Revenue", "H Calendar"."Year", 1)
"H Calendar"."Year" - is level in my time Hierarchy "H Calendar".
But when I clicked [OK], I got error: [nQSError: 27037] Unresolved level: "H Calendar"."Year".(HY000)
What I do wrong?Hi,
I think it's a bug, try this.
If Analysis you have a time folder with this object dimension:
Time Hierarchy
Total Time
Year
Quarter
Month
Week
Day
And a measures 1- Revenue try to calculate the criteria like this (write in the level the formula "Time"."Time Hierarchy".Year)
For example:
AGO("Base Facts"."1- Revenue", "Time"."Time Hierarchy".Year,1)
If you have the sample sales of the 11g installed try this on A - Sample Sales
SELECT s_0, s_1, s_2 FROM (
SELECT
0 s_0,
"A - Sample Sales"."Time"."T05 Per Name Year" s_1,
AGO("A - Sample Sales"."Base Facts"."1- Revenue","Time"."Time Hierarchy"."Year",1) s_2
FROM "A - Sample Sales"
) djm ORDER BY 1, 2 ASC NULLS LAST
For me it works.
Regards,
Gianluca -
Generic Extraction By Using function Module with Three Table fields?
Hi,
I need to bring the data from three tables by using function module.
Tables: VBAK, VBAP, VBUK.
Fields are: VBELN, ERDAT, NETWR, WEARK, POSNR, MATNR, FKART, FKTYP.
i referred some of the documents in SDN, it explained by using two table fields.
Please help me.hi, the below pseudo code should help you on creating the logic. It's based on the how to paper. So i just used the parts of intrest. You need to copy the rest form the document. Please notice that this is pseudo code. if you just copy/paste, it will not work.
IF s_counter_datapakid = 0.
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT fields FROM table1 WHERE condition
ENDIF. "First data package ?
* Fetch records into interface table.
* named E_T_'Name of extract structure'.
FETCH NEXT CURSOR s_cursor
INTO TABLE e_t_data
PACKAGE SIZE s_s_if-maxsize.
IF sy-subrc EQ 0.
SELECT fields FROM table2 WHERE condition into itab2 for all entries in e_t_data
SELECT fields FROM table3 WHERE condition into itab3 for all entries in e_t_data
loop at e_t_data
read itab2. move corresponding fields to e_t_data
read itab3. move corresponding fields to e_t_data
collect e_t_data.
endif.
IF sy-subrc <> 0.
CLOSE CURSOR s_cursor.
RAISE no_more_data.
ENDIF.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ? -
Example of a Simple ALV Report using Function Modules (not OO)
Hi,
I am new to ABAP. Where can I get a proper Example of a Simple ALV Report using Function Modules? I searched the forum but did not find a proper solution. Kindly help.
Smruthi.
Edited by: Smruthi Acharya on Jan 29, 2009 7:13 PMHi,
Use this demo code:-
REPORT z_alv01 MESSAGE-ID zmsg.
* TABLES
TABLES : ekpo.
* TYPE POOLS
TYPE-POOLS : slis.
* TYPE DECLARATION
TYPES : BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
werks TYPE ekpo-werks,
menge TYPE ekpo-menge,
END OF t_ekpo.
* PARAMETERS
PARAMETERS : s_var TYPE disvariant-variant.
* DATA DECLARATION
*VARIABLES
DATA : check(1),
rep_id TYPE sy-repid.
*INTERNAL TABLE TYPE OF ZEKPO
DATA : it_ekpo TYPE STANDARD TABLE OF t_ekpo WITH HEADER LINE.
*FIELD CATALOG
DATA : it_field TYPE slis_t_fieldcat_alv,
wa_field TYPE slis_fieldcat_alv.
*SORTING
DATA : it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
*FOR TOP OF THE PAGE
DATA : it_top TYPE slis_t_listheader,
wa_top TYPE slis_listheader.
*FOR END OF THE PAGE
DATA : it_end TYPE slis_t_listheader,
wa_end TYPE slis_listheader.
*TO CAPTURE EVENTS AND HANDLE
DATA : it_event TYPE slis_t_event,
wa_event TYPE slis_alv_event.
*FOR GRID TITLE
DATA : wa_title TYPE lvc_title.
*FOR LAYOUT
DATA : wa_layout TYPE slis_layout_alv.
*FOR EXCLUDING STANDARD BUTTON FROM ALV TOOLBAR
DATA : it_exclude TYPE slis_t_extab,
wa_exclude TYPE slis_extab.
*FOR VARIANT
DATA : wa_variant TYPE disvariant.
* INITIALIZATION
INITIALIZATION.
check = 'X'.
rep_id = sy-repid.
wa_variant-report = sy-repid.
*GET DEFUALT ON THE SELECTION SCREEN FOR DEFAULT DISPLAY
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0. " IF DEFAULT VARIANT FOUND
s_var = wa_variant-variant. " PASS THE DEFAULT VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN ON VALUE REQUEST
* TO GET THE F4 HELP FOR VARIANT
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = wa_variant
* I_TABNAME_HEADER =
* I_TABNAME_ITEM =
* IT_DEFAULT_FIELDCAT =
i_save = 'A'
* I_DISPLAY_VIA_GRID = ' '
IMPORTING
* E_EXIT =
es_variant = wa_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
s_var = wa_variant-variant. " PASS THE SELECTED VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN
* TO CHECK THE EXISTENCE FOR VARIANT
AT SELECTION-SCREEN.
wa_variant-variant = s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE w001.
ENDIF.
* START OF SELECTION
START-OF-SELECTION.
SELECT ebeln
ebelp
matnr
werks
menge
FROM ekpo
INTO TABLE it_ekpo.
* FIELD CATALOG
wa_field-fieldname = 'EBELN'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'PO #'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'EBELP'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Line Item'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MATNR'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 15.
wa_field-seltext_l = 'Material'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'WERKS'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 6.
wa_field-seltext_l = 'Plant'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MENGE'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Qty.'.
* wa_field-input = check.
* wa_field-edit = check.
wa_field-do_sum = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
* SORT W.R.T. PURCHASE ORDER NUMBER
wa_sort-spos = 1.
wa_sort-fieldname = 'EBELN'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = check.
wa_sort-subtot = check.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
* FOR GRID TITLE
wa_title = 'Hello'.
* FOR LAYOUT
wa_layout-zebra = check.
* FOR EXCLUDING STANDARD BUTTONS FROM ALV TOOLBAR
wa_exclude-fcode = '&OUP'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&ODN'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&OAD'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* wa_exclude-fcode = '&AVE'.
* APPEND wa_exclude TO it_exclude.
* CLEAR wa_exclude.
wa_exclude-fcode = '&INFO'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* POPULATE ALL EVENTS INTO INTERNAL TABLE
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE it_event INTO wa_event WITH KEY name = 'END_OF_LIST'.
wa_event-form = 'END'.
MODIFY it_event FROM wa_event INDEX sy-tabix.
CLEAR wa_event.
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = rep_id
* i_callback_pf_status_set = 'PF'
i_callback_user_command = 'COMMAND'
i_callback_top_of_page = 'TOP'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
i_grid_title = wa_title
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_field
it_excluding = it_exclude
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
i_save = 'A'
is_variant = wa_variant
it_events = it_event
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form top
* TO WRITE THE HEADER
FORM top.
REFRESH it_top.
wa_top-typ = 'S'.
wa_top-key = text-001.
wa_top-info = rep_id.
APPEND wa_top TO it_top.
CLEAR wa_top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_top
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "top
*& Form end
* TO WRITE THE FOOTER
FORM end.
REFRESH it_end.
wa_end-typ = 'S'.
wa_end-key = text-001.
wa_end-info = rep_id.
APPEND wa_end TO it_end.
CLEAR wa_end.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_end
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "end
*& Form pf
* FOR PF-STATUS WITH USER DEFINED BUTTONS
* -->RT_EXTAB text
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_PF_ALV'.
ENDFORM. "pf
*& Form command
* TO HANDLE USER ACTIONS AGAINST PF-STATUS
* -->UCOMM text
* -->SELFIELD text
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
WHEN 'T_DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL DOWN'.
WHEN 'DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'DOWN'.
WHEN 'UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'UP'.
WHEN 'T_UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL UP'.
ENDCASE.
ENDFORM. "command
Hope this helps you.
Thanks & Regards,
Tarun Gambhir -
Time Zone Conversion with out using function and with out alter
Hi All,
I am able to see 1Hr difference in my date fields of SQL output because in UI (User Interface) date field was stored in BST format but DB time zone is in GMT format so can any one help me to find a solution for 1 hr difference, here i don't have Privileges to alter DB time zone and i couldn't use function as i have so many SQL's and can't apply that function manually. SO is there any other option to change the DB time zone with out alter it and with out using function.
Thank you Very Much.Hi,
you need to set time zone in your session, let's do an example :
alter session set nls_date_format='DD/MM/YYYY HH24:MI:SS';
CREATE TABLE USERA.T
SDATE DATE DEFAULT sysdate,
WITHOUT_TZ TIMESTAMP(6) DEFAULT sysdate,
WITH_TZ TIMESTAMP(6) WITH TIME ZONE DEFAULT sysdate,
WITH_LZ TIMESTAMP(6) WITH LOCAL TIME ZONE DEFAULT sysdate
insert into USERA.T(sdate) values(sysdate);
commit;
select * from USERA.T;
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-11.04.23.000000
SQL> alter session set TIME_ZONE ='-7:0';
Session altered.
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-04.04.23.000000 -
hi,
in alv's using fuction modules how to add pushbuttons in application tool bar?Hi Ganapathi,
Check out the list of Function Modules
ABAP_DOCU_DOWNLOAD Download ABAP documentation in HTML format.
APPL_LOG_DELETE With this function module you delete logs in the database according to specified selection conditions
APPL_LOG_DISPLAY With this function module you can analyze logs in the database.
APPL_LOG_DISPLAY_INTERN With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
APPL_LOG_INIT This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
APPL_LOG_READ_DB With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
APPL_LOG_READ_INTERN With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
APPL_LOG_SET_OBJECT With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the APPL_LOG_WRITE_... messages are written in local memory or are output on the screen.
APPL_LOG_WRITE_DB With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
APPL_LOG_WRITE_HEADER With this function module, you write the log header data in local memory.
APPL_LOG_WRITE_LOG_PARAMETERS With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
APPL_LOG_WRITE_MESSAGE_PARAMS With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like APPL_LOG_WRITE_SINGLE_MESSAGE.
APPL_LOG_WRITE_MESSAGES With this function module you write one or more messages, without parameters, in local memory.
APPL_LOG_WRITE_SINGLE_MESSAGE With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
ARFC_GET_TID will return the IP address of the terminal in hex.
BAL_CNTL_CREATE Create Control for log display
BAL_CNTL_FREE Release Control
BAL_CNTL_REFRESH Put new data in log display
BAL_DB_DELETE Delete logs from the database
BAL_DB_DEQUEUE Unlock log
BAL_DB_ENQUEUE Lock log
BAL_DB_LOAD Load logs from the database
BAL_DB_LOAD Load log(s)
BAL_DB_SAVE Save logs in the database
BAL_DB_SAVE Save log(s)
BAL_DB_SAVE_PREPARE Prepare save
BAL_DB_SEARCH Find logs in the database
BAL_DSP_LOG_DISPLAY Display messages in memory
BAL_DSP_LOG_DISPLAY Display Log
BAL_DSP_LOG_PARAMETERS Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
BAL_DSP_LOG_TECHNICAL_DATA Output all log header data
BAL_DSP_MSG_LONGTEXT Display message long text
BAL_DSP_MSG_PARAMETERS Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
BAL_DSP_MSG_TECHNICAL_DATA Output technical data of a message such as work area, error number, etc.
BAL_DSP_OUTPUT_FREE End output
BAL_DSP_OUTPUT_INIT Initialize output
BAL_DSP_OUTPUT_SET_DATA Set dataset to be displayed
BAL_DSP_PROFILE_DETLEVEL_GET Message hierarchy in DETLEVEL
BAL_DSP_PROFILE_NO_TREE_GET Display without tree (fullscreen)
BAL_DSP_PROFILE_POPUP_GET Display without tree (popup)
BAL_DSP_PROFILE_SINGLE_LOG_GET Standard profile (SLG1) for one log
BAL_DSP_PROFILE_STANDARD_GET Standard profile (SLG1) for a lot of logs
BAL_GLB_AUTHORIZATION_GET Assign authorization
BAL_GLB_AUTHORIZATION_RESET Reset authorization
BAL_GLB_CONFIG_GET Read configuration
BAL_GLB_CONFIG_SET Set configuration
BAL_GLB_MEMORY_EXPORT Put function group memory in ABAP-MEMORY
BAL_GLB_MEMORY_IMPORT Get function group memory from ABAP-MEMORY
BAL_GLB_MEMORY_REFRESH (Partially) reset global memory
BAL_GLB_MEMORY_REFRESH (Partially) initialize memory
BAL_GLB_MSG_CURRENT_HANDLE_GET Get current message handle
BAL_GLB_MSG_DEFAULTS_GET Get message defaults
BAL_GLB_SEARCH_LOG Find logs in memory
BAL_GLB_SEARCH_MSG Find messages in memory
BAL_LOG_CREATE Create log with header data
BAL_LOG_CREATE Create log with header data
BAL_LOG_DELETE Delete log (from database also at Save)
BAL_LOG_EXIST Check existence of a log in memory
BAL_LOG_HDR_CHANGE Change log header
BAL_LOG_HDR_CHECK Check log header data for consistency
BAL_LOG_HDR_READ Read log header and other data
BAL_LOG_MSG_ADD Put message in log
BAL_LOG_MSG_ADD Put message in log
BAL_LOG_MSG_CHANGE Change message
BAL_LOG_MSG_CHANGE Change message
BAL_LOG_MSG_CHECK Check message data for consistency
BAL_LOG_MSG_CUMULATE Add message cumulated
BAL_LOG_MSG_DELETE Delete message
BAL_LOG_MSG_DELETE Delete message
BAL_LOG_MSG_EXIST Check existence of a message in memory
BAL_LOG_MSG_READ Read message and other data
BAL_LOG_MSG_REPLACE Replace last message
BAL_LOG_REFRESH Delete log from memory
BAL_LOG_REFRESH Delete log from memory
BAL_MSG_DISPLAY_ABAP Output message as ABAP-MESSAGE
BAL_OBJECT_SELECT Read Application Log objects table record
BAL_OBJECT_SUBOBJECT Check whether object and subobject exist and the combination is allowed
BAL_SUBOBJECT_SELECT Read subobject table record
BP_EVENT_RAISE Trigger an event from ABAP/4 program
BP_JOBLOG_READ Fetch job log executions
CHANGEDOCUMENT_READ_HEADERS Get the change document header for a sales document, and put the results in an internal table.
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CHANGEDOCUMENT_READ_POSITIONS Get the details of a change document, and store them in an internal table. This will tell you whether a field was changed, deleted, or updated.
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CLAF_CLASSIFICATION_OF_OBJECTS Return all of the characteristics for a material
CLOI_PUT_SIGN_IN_FRONT Move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justified as numbers normally are.
CLPB_EXPORT Export a text table to the clipboard (on presentation server)
CLPB_IMPORT Import a Text Table from the Clipboard (on presentation server)
COMMIT_TEXT To load long text into SAP
CONVERSION_EXIT_ALPHA_INPUT converts any number into a string fill with zeroes, with the number at the extreme right
Example:
input = 123
output = 0000000000000...000000000000123
CONVERSION_EXIT_ALPHA_OUTPUT converts any number with zeroes right into a simple integer
Example:
input = 00000000000123
output = 123
CONVERT_ABAPSPOOLJOB_2_PDF convert abap spool output to PDF
CONVERT_OTF Convert SAP documents (SAPScript) to other types.
Example:
CALL FUNCTION "CONVERT_OTF"
EXPORTING FORMAT = "PDF"
IMPORTING BIN_FILESIZE = FILE_LEN
TABLES OTF = OTFDATA
LINES = PDFDATA
EXCEPTIONS ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
CONVERT_OTFSPOOLJOB_2_PDF converts a OTF spool to PDF (i.e. Sapscript document)
CONVERT_TO_FOREIGN_CURRENCY Convert local currency to foreign currency.
CONVERT_TO_LOCAL_CURRENCY Convert from foreign currency to local currency
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_GET_WEEK will return the week that a date is in.
DATE_IN_FUTURE Calculate a date N days in the future.
DAY_ATTRIBUTES_GET Return useful information about a day. Will tell you the day of the week as a word (Tuesday), the day of the week (2 would be Tuesday), whether the day is a holiday, and more.(provided by Francois Henrotte)
DOWNLOAD download a file to the presentation server (PC)
DYNP_VALUES_READ Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
DYNP_VALUES_UPDATE Similar to DYNP_VALUES_READ, this function will allow the updating of fields on a dynpro. Very useful when you want to change a field based on the value entered for another field.
ENQUE_SLEEP Wait a specified period of time before continuing processing.
ENQUEUE_ESFUNCTION Lock an abap program so that it cannot be executed.
Example:
Set the parameters as follows:
RELID = 'ZZ'
SRTF2 = 0
SRTF = (your report name)
Please note that you should not use SY-REPID to pass your report name to the function. The value of SY-REPID will change as it is being passed to the function module, and will no longer hold the value of the calling report.
EPS_GET_DIRECTORY_LISTING return a list of filenames from a local or network drive
EPS_GET_FILE_ATTRIBUTES Pass in a filename and a path, and will return attributes for the file
F4_DATE displays a calendar in a popup window and allows user to choose a date, or it can be displayed read only.
F4_IF_FIELD_VALUE_REQUEST Use values from a DDIC table to provide a list of possible values. TABNAME and FIELDNAME are required fields, and when MULTIPLE_CHOICE is selected, more than one value can be returned.
F4IF_INT_TABLE_VALUE_REQUEST F4 help that returns the values selected in an internal table. Very handy when programming your very own F4 help for a field.
Example:
data:
begin of t_values occurs 2,
value like kna1-begru,
end of t_values,
t_return like ddshretval occurs 0 with header line.
t_values = 'PAR*'.
append t_values.
t_values = 'UGG'.
append t_values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'BEGRU'
value_org = 'S'
tables
value_tab = t_values
return_tab = t_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
read table t_return index 1.
o_begru-low = t_return-fieldval.
if o_begru-low = 'PAR*'.
o_begru-option = 'CP'.
else.
o_begru-option = 'EQ'.
endif.
o_begru-sign = 'I'.
append o_begru to s_begru.
else.
o_begru = i_begru.
endif.
F4IF_SHLP_EXIT_EXAMPLE documents the different reasons to use a search help exit, and shows how it is done.
F4IP_INT_TABLE_VALUE_REQUEST This function does not exist in 4.6 and above. Use F4IF_INT_TABLE_VALUE_REQUEST instead.
FILENAME_GET popup to get a filename from a user, returns blank filename if user selects cancel
FORMAT_MESSAGE Takes a message id and number, and puts it into a variable. Works better than WRITE_MESSAGE, since some messages use $ as a place holder, and WRITE_MESSAGE does not accommodate that, it only replaces the ampersands (&) in the message.
FTP_COMMAND Execute a command on the FTP server
FTP_CONNECT Open a connection (and log in) to an FTP server
FTP_DISCONNECT Close the connection (and log off) the FTP server
FU CSAP_MAT_BOM_READ You can use this function module to display simple material BOMs. You cannot display BOM groups (for example, all variants of a variant BOM). as in transaction CS03. Current restrictions: You cannot display long texts. You cannot display sub-items. You cannot display classification data of BOM items for batches. You can only display one alternative or variant. You cannot enter an alternative for module CSAP_MAT_BOM_READ, so you always see alternative 01. The following example came from a posting on the SAP-R3-L mailing list.
Example:
data: begin of tstk2 occurs 0.
include structure stko_api02.
data: end of tstk2.
data: begin of tstp2 occurs 0.
include structure stpo_api02.
data: end of tstp2.
data: begin of tdep_data occurs 0.
include structure csdep_data.
data: end of tdep_data.
data: begin of tdep_descr occurs 0.
include structure csdep_descr.
data: end of tdep_descr.
data: begin of tdep_source occurs 0.
include structure csdep_source.
data: end of tdep_source.
data: begin of tdep_order occurs 0.
include structure csdep_order.
data: end of tdep_order.
data: begin of tdep_doc occurs 0.
include structure csdep_doc.
data: end of tdep_doc.
data: flg_warning like capiflag-flwarning.
call function 'CSAP_MAT_BOM_READ'
exporting
material = 'MAT100'
plant = '0001'
bom_usage = '1'
valid_from = '20.12.1996'
valid_to
importing
fl_warning = flg_warning
tables
t_stko = tstk2
t_stpo = tstp2
t_dep_data = tdep_data
t_dep_descr = tdep_descr
t_dep_source = tdep_source
t_dep_order = tdep_order
t_dep_doc = tdep_doc
exceptions
error = 1.
Function Group GRAP is now obsolete. SAP recommends using functions in function group SFES instead. Below is an overview of the changes.
G_SET_GET_ALL_VALUES Fetch values from a set.
GET_CURRENT_YEAR Get the current fiscal year.
Example:
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
BUKRS = '1000' " Company Code
DATE = SY-DATUM " Date to find fiscal year for
IMPORTING
CURRM = w_currm " Current Fiscal Month
CURRY = w_curry " Current Fiscal Year
PREVM = w_prevm " Previous Fiscal Month
PREVY = w_prevy. " Previous Fiscal Year
GET_GLOBAL_SYMBOLS Returns a list of all tables, select options, texts, etc for a program. Even includes the text definitions for the selection screen
GET_INCLUDETAB Returns a list of all INCLUDES in a program
GET_JOB_RUNTIME_INFO Get the current job number from a program. Also returns other useful info about the current job.
GUI_CREATE_DIRECTORY Create a directory on the presentation server
GUI_DELETE_FILE Replaces WS_FILE_DELETE. Delete a file on the presentation server
GUI_DOWNLOAD Replaces WS_DOWNLOAD. Download table from the app server to presentation server
GUI_EXEC Replaces WS_EXECUTE. Start a File or Program Asynchronously with WinExec
GUI_GET_DESKTOP_INFO Replaces WS_QUERY. Delivers Information About the Desktop (client)
GUI_REMOVE_DIRECTORY Delete a directory on the presentation server
GUI_RUN Start a File or Program Asynchronously with Shell Execute
GUI_UPLOAD Replaces WS_UPLOAD. Upload file from presentation server to the app server
HELP_START Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
HELP_VALUES_GET_WITH_TABLE Show a list of possible values for F4 popup help on selection screens. This function module pops up a screen that is just like all the other F4 helps, so it looks like the rest of the SAP system. Very useful for providing dropdowns on fields that do not have them predefined.
Example:
tables: t001w.
DATA: lc_werks LIKE t001w-werks,
ltab_fields LIKE help_value OCCURS 0 with header line,
BEGIN OF ltab_values OCCURS 0,
feld(40) TYPE c,
END OF ltab_values.
*-- Set up fields to retrieve data
ltab_fields-tabname = 'T001W'.
ltab_fields-fieldname = 'WERKS'.
ltab_fields-selectflag = 'X'.
APPEND ltab_fields.
ltab_fields-tabname = 'T001W'.
ltab_fields-fieldname = 'NAME1'.
ltab_fields-selectflag = space.
APPEND ltab_fields.
*-- Fill values
select * from t001w.
ltab_values-feld = t001w-werks.
append ltab_values.
ltab_values-feld = t001w-name1.
append ltab_values.
endselect.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
EXPORTING
fieldname = 'WERKS'
tabname = 'T001W'
title_in_values_list = 'Select a value'
IMPORTING
select_value = lc_werks
TABLES
fields = ltab_fields
valuetab = ltab_values
EXCEPTIONS
field_not_in_ddic = 01
more_then_one_selectfield = 02
no_selectfield = 03.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the date is a holiday by checking the parameter HOLIDAY_FOUND.
Example:
data: ld_date like scal-datum default sy-datum,
lc_holiday_cal_id like scal-hcalid default 'CA',
ltab_holiday_attributes like thol occurs 0 with header line,
lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
date = ld_date
holiday_calendar_id = lc_holiday_cal_id
WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
HOLIDAY_FOUND = lc_holiday_found
tables
holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
CALENDAR_BUFFER_NOT_LOADABLE = 1
DATE_AFTER_RANGE = 2
DATE_BEFORE_RANGE = 3
DATE_INVALID = 4
HOLIDAY_CALENDAR_ID_MISSING = 5
HOLIDAY_CALENDAR_NOT_FOUND = 6
OTHERS = 7.
if sy-subrc = 0 and
lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HR_DISPLAY_BASIC_LIST is an HR function, but can be used for any data. You pass it data, and column headers, and it provides a table control with the ability to manipulate the data, and send it to Word or Excel. Also see the additional documentation here.
HR_GET_LEAVE_DATA Get all leave information (includes leave entitlement, used holidays/paid out holidays)
HR_IE_NUM_PRSI_WEEKS Return the number of weeks between two dates.
HR_PAYROLL_PERIODS_GET Get the payroll period for a particular date. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = w_begda
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = w_pernr
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
get_zl = it_zl
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
NOTE: it_zl-iftyp = 'A' absence
it_zl-iftyp = 'S' at work
HR_TIME_RESULTS_GET Get the time results for a payroll period. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = w_begda
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = w_pernr
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
get_zl = it_zl
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
NOTE: it_zl-iftyp = 'A' absence
it_zl-iftyp = 'S' at work
INIT_TEXT To load long text into SAP
K_WERKS_OF_BUKRS_FIND Return a list of all plants for a given company code.
LIST_FROM_MEMORY Retrieves the output of a report from memory when the report was executed using SUBMIT... EXPORTING LIST TO MEMORY. See also WRITE_LIST.
LIST_TO_ASCII convert an ABAP report (displayed on screen) from OTF to ASCII format
MBEW_EXTEND Get the stock position for the previous month. This displays the same info that you see in MM03.
MONTH_NAMES_GET It returns all the month and names in respective language.
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
Example:
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
MS_EXCEL_OLE_STANDARD_OLE will build a file, and automatically start Excel
OTF_CONVERT wraps several other function modules. Will convert OTF to ASCII or PDF
POPUP_TO_CONFIRM_LOSS_OF_DATA Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
POPUP_TO_CONFIRM_STEP Create a dialog box in which you make a question whether the user wishes to perform the step.
POPUP_TO_CONFIRM_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point during an action.
POPUP_TO_CONFIRM_WITH_VALUE Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
POPUP_TO_DECIDE Provide user with several choices as radio buttons
POPUP_TO_DECIDE_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
POPUP_TO_DISPLAY_TEXT Create a dialog box in which you display a two line message
POPUP_TO_SELECT_MONTH Popup to choose a month
POPUP_WITH_TABLE_DISPLAY Provide a display of a table for user to select one, with the value of the table line returned when selected.
PRICING Return pricing conditions in an internal table. Use structure TCOMK for parameter COMM_HEAD_1, and structure TCOMP for parameter COMM_ITEM_1, and set CALCULATION_TYPE to B. The pricing conditions will be returned in XOMV. You must fill TCOMP, and TCOMK with the appropriate values before callling the function in order for it to work.
PROFILE_GET Read an Entry in an INI File on the frontend
PROFILE_SET Write an Entry in an INI File on the frontend
READ_TEXT To load long text into SAP
REGISTRY_GET Read an Entry from the Registry
REGISTRY_SET Set an entry in the Registry
RFC_ABAP_INSTALL_AND_RUN Runs an ABAP program that is stored in the table PROGRAM when the MODE = 'F'. Table WRITES contains the ouput of the program. Allows you to run a program without having the source code in the target system.
RH_GET_ACTIVE_WF_PLVAR Return the active HR Plan
RH_GET_DATE_DAYNAME return the day based on the date provied
RH_START_EXCEL_WITH_DATA starts Excel with the contents of an internal table. This function finds Excel in the desktop registry. It also uses a local PC working directory to save the file (that's what the 'W' value for data path flag does). Very transparent to user!
RH_STRUC_GET Returns all related org info
RHP0_POPUP_F4_SEARK is a matchcode for any type of HR Planning object, including the possibility to fill the field that you want
Example:
Examples: search for any organizational structure
F4 = 'X'
PLVAR = '01'
OTYPE = 'O '
search for any persons
F4 = 'X'
PLVAR = '01'
OTYPE = 'P '
MULTI_SELECT = 'X' to allow multiple selection
EASY = 'X' for user-dependent matchcode
Unfortunately, the use of table BASE_OBJIDS is disabled, so you can't specify
a root for the hierarchy you display
RKD_WORD_WRAP Convert a long string or phrase into several lines.
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
RP_LAST_DAY_OF_MONTHS Determine last day of month
RPY_DYNPRO_READ Read dynpro, including screen flow
RPY_TRANSACTION_READ Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
RS_COVERPAGE_SELECTIONS Returns an internal table that contains a formatted list of all the selection parameters entered for a report. Table is ready to print out.
RS_REFRESH_FROM_SELECTOPTIONS Get the current contents of selection screen
RS_SEND_MAIL_FOR_SPOOLLIST Send message from ABAP/4 program to SAPoffice.
RS_VARIANT_CONTENTS Returns the contents of the specified variant in a table.
RSPO_DOWNLOAD_SPOOLJOB Download the spool from a program to a file. Requires spool number.
RSPO_RETURN_ABAP_SPOOLJOB Fetch printer spool according to the spool number informed.
RZL_READ_DIR If the server name is left blank, it reads a directory from local presentation server, otherwise it reads the directory of the remote server
RZL_READ_DIR_LOCAL Read a directory on the Application Server
RZL_READ_FILE Read a file from the presentation server if no server name is given, or read file from remote server. Very useful to avoid authority checks that occur doing an OPEN DATASET. This function using a SAP C program to read the data.
RZL_SLEEP Hang the current application from 1 to 5 seconds.
RZL_SUBMIT Submit a remote report.
RZL_WRITE_FILE_LOCAL Saves table to the presentation server (not PC). Does not use OPEN DATASET, so it does not suffer from authority checks!
SAP_CONVERT_TO_XLS_FORMAT Convert data to Microsoft Excel format.
SAPGUI_PROGRESS_INDICATOR Display a progress bar on the SAP GUI, and give the user some idea of what is happening
SAVE_TEXT To load long text into SAP
SCROLLING_IN_TABLE If you are coding a module pool and using a table control, you can use this function SCROLLING_IN_TABLE to handle any scrolling. (provided by Paul Kjaer)
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
SO_NEW_DOCUMENT_ATT_SEND_API1 Send a document as part of an email. The documentation is better than normal for this function, so please read it.
SO_SPLIT_FILE_AND_PATH Split a fully pathed filename into a filename and a path.
SO_SPOOL_READ Fetch printer spool according to the spool number informed. See also RSPO_RETURN_ABAP_SPOOLJOB
SO_WIND_SPOOL_LIST Browse printer spool numbers according to user informed.
SWD_HELP_F4_ORG_OBJECTS HR Matchcode tailored for organizational units. Includes a button so that you can browse the hierarchy too.
SX_OBJECT_CONVERT_OTF_PDF Conversion From OTF to PDF (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_PRT Conversion From OTF to Printer Format (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_RAW Conversion From OTF to ASCII (SAPScript conversion)
SXPG_CALL_SYSTEM you can check the user's authorization for the specified command and run the command. The command runs on the host system on which the function module is executed. The function module is RFC capable. It can therefore be run on the host system at which a user happens to be active or on another designated host system at which an R/3 server is active.
SXPG_COMMAND_CHECK Check whether the user is authorized to execute the specified command on the target host system with the specified arguments.
SXPG_COMMAND_DEFINITION_GET Read the definition of a single external OS command from the R/3 System's database.
SXPG_COMMAND_EXECUTE Check a user's authorization to use a command, as in SXPG_COMMAND_CHECK. If the authorization check is successful, then execute the command on the target host system.
SXPG_COMMAND_LIST_GET Select a list of external OS command definitions.
TERMINAL_ID_GET Return the terminal id
TH_DELETE_USER Logoff a user. Similar results to using SM04.
TH_ENVIRONMENT Get the UNIX environment
TH_POPUP Display a popup system message on a specific users screen.
TH_REMOTE_TRANSACTION Run a transaction on a remote server. Optionally provide BDC data to be used in the transaction
TH_USER_INFO Give information about the current user (sessions, workstation logged in from, etc)
TH_USER_LIST Show which users are logged into an app server
TMP_GUI_DIRECTORY_LIST_FILES Retrieve all of the files and subdirectories on the Presentation Server (PC) for a given directory.
When a value other than * or . is used for the filter, you will not get any directories, unless they match your wildcard filter. For example, if you entered *.png, then only files and directories that end in png will be returned by the function.
Example:
data: lc_directory like bdschko16-target_dir value 'C:\TEMP\',
lc_filter(20) type c default '.'.
li_file_count type i,
li_dir_count type i,
ltab_dir_table like sdokpath occurs 0 with header line,
ltab_file_file_table like sdokpath occurs 0 with header line.
call function 'TMP_GUI_DIRECTORY_LIST_FILES'
exporting
directory = lc_directory
filter = lc_filter importing
file_count = li_file_count
dir_count = li_dir_count
tables
file_table = ltab_file_table
dir_table = ltab_dir_table
exceptions
cntl_error = 1
others = 2.
UNIT_CONVERSION_SIMPLE convert weights from one UOM to another.
UPLOAD upload a file to the presentation server (PC)
UPLOAD_FILES Will load one or more files from app or presentation server
WEEK_GET_FIRST_DAY For a given week (YYYYMM format), this function returns the date of the Monday of that week.
WRITE_LIST Useful for writing out the list contents that result from the function LIST_FROM_MEMORY.
WS_DOWNLOAD Save Internal Table as File on the Presentation Server
WS_EXCEL Start EXCEL on the PC
WS_EXECUTE execute a program on a windows PC
WS_FILE_DELETE Delete File at the Frontend
WS_FILENAME_GET Call File Selector
WS_MSG Create a dialog box in which you display an one line message
WS_UPLOAD Load Files from the Presentation Server to Internal ABAP Tables
WS_VOLUME_GET Get the label from a frontend device.
WWW_LIST_TO_HTML After running a report, call this function to convert the list output to HTML.
I don't think there is any function module for ALV.
Even for more info Checkout the links
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Regards,
Chandru -
Using Function Keys and Alt Key in Flash Video
I am attempting to create an eLearning video, which includes instructions, a "try it yourself" section, and then a quiz. Our software that I am trying to simulate uses Function keys (F6 to bring up specific windows) as well as shortcut keys (Alt-S takes the user to a certain field, Alt-P conducts a Patient Search, etc). However, I have found that when running the video using IE, the browser takes over the focus and these function keys do not control the video.
These functions work fine in Google Chrome (not approved for use by the company) and when the video is published as .exe, but I need this to work in IE.
Is there anyway to retain the focus on the flash video for the entire video?
Thanks so much for any help!Here is the Preference dialog that Lilybiri was referring to where you can change the key assignments.
When finished recording, you can click the Restore Defaults button to set everything back the way it was. -
How to Send Internal table to SAP Spool using Function Modules or Methods?
Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
KiranThis is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C,
CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_buffer type string,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
spool_id type rspoid,
line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
ITAB-PERNR = P0001-PERNR.
ITAB-ABKRS = P0001-ABKRS.
ITAB-ENAME = P0001-ENAME.
ITAB-USRID_LONG = P0105-USRID_LONG.
append itab.
clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
* Produce payslip for those payroll results
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
EXPORTING
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
IMPORTING
RETURN = RETURN
P_INFO = P_INFO
TABLES
P_FORM = P_FORM.
check RETURN is initial.
* remove linetype from generated payslip
loop at p_form.
objbin = p_form-linda.
append objbin.
line_cnt = line_cnt + 1.
endloop.
file_length = line_cnt * 1022.
* create spool file of paylsip
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = file_length
IMPORTING
e_spoolid = spool_id
TABLES
it_textdata = objbin.
IF sy-subrc EQ 0.
WRITE spool_id.
ENDIF.
DESCRIBE table objbin.
DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_id
NO_DIALOG = ' '
DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\itab_to_pdf.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
OBJHEAD = 'Objhead'.
append OBJHEAD.
* preparing email subject
concatenate W_ENDDA(6)
' Payslip-'
ITAB-ENAME+0(28)
ITAB-PERNR+4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
*prepare email lines
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Please find enclosed your current payslip.'.
append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
* Create Message Attachment
ATT_TYPE = 'PDF'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
* Create receiver list refresh RECLIST.
clear RECLIST.
RECLIST-RECEIVER = itab-USRID_long.
translate RECLIST-RECEIVER to lower case.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
call function 'SO_DOCUMENT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = pdf
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC NE 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
else.
"SY-SUBRC Not = 0
ITAB-MTEXT = 'Payroll data not found : '.
endif.
"end of SY-SUBRC = 0.
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop. -
Hi. i used Function module to change Characteristic values of a sales order
hi. i used Function module to change Characteristic values of a sales order..
but sales order's Characteristic values didn't change.
And the Function module doesn't occur any log message.
please tell me wrong code, and how to solve this problem.
if i have wrong method, what data can i pass to change the characteristic values
DATA: LT_E1CUVAL TYPE TABLE OF E1CUVAL.
DATA: WA_E1CUVAL TYPE E1CUVAL.
DATA: LS_CFG_HEAD LIKE CUXT_CUCFG_S,
LS_INSTANCES LIKE CUXT_CUINS_S,
LS_VALUES LIKE CUXT_CUVAL_S,
LS_E1CUCFG LIKE E1CUCFG,
LS_E1CUINS LIKE E1CUINS,
LS_E1CUVAL LIKE E1CUVAL,
LS_PROFILE LIKE E1CUCOM,
LS_VBAP LIKE VBAP,
L_CUOBJ LIKE INOB-CUOBJ,
L_ATINN LIKE CABN-ATINN.
DATA: LT_INSTANCES LIKE CUXT_CUINS_S OCCURS 0,
LT_PART_OF LIKE CUXT_CUPRT_S OCCURS 0,
LT_VALUES LIKE CUXT_CUVAL_S OCCURS 0,
LT_VAR_KEYS LIKE CUXT_CUVK_S OCCURS 0,
LT_KSML LIKE KSML OCCURS 0 WITH HEADER LINE,
BEGIN OF LT_CLINT OCCURS 0,
CLINT LIKE KSSK-CLINT,
END OF LT_CLINT.
DATA: LT_CUIB LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
DATA: E_ROOT_INSTANCE TYPE CUXT_INSTANCE_NO.
DATA: EV_ROOT_PERSIST_ID TYPE IBEXTINST_DATA-EXT_INST_ID.
DATA: EV_CFG_HAS_CHANGED TYPE XFELD.
DATA: EV_HANDLE_APPL_LOG TYPE BALLOGHNDL.
DATA: L_CUOBJ_NEW TYPE CUOBJ.
DATA: L_OWNER TYPE IBXX_BUSINESS_OBJECT.
REFRESH LT_E1CUVAL.
CLEAR LS_VBAP.
SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
FROM VBAP WHERE VBELN = I_VBELN
AND POSNR = I_POSNR.
IF SY-SUBRC <> 0.
RAISE INSTANCE_NOT_FOUND.
ENDIF.
REFRESH LT_CUIB. CLEAR LT_CUIB.
LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
APPEND LT_CUIB.
CALL FUNCTION 'CUCB_INITIALIZER'
EXPORTING
IT_INSTANCES = LT_CUIB[].
CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
EXPORTING
I_ROOT_INSTANCE = LS_VBAP-CUOBJ
IMPORTING
E_CFG_HEAD = LS_CFG_HEAD
ES_PROFILE = LS_PROFILE
ET_RETURN = ET_RETURN
TABLES
E_TAB_INSTANCES = LT_INSTANCES
E_TAB_PART_OF = LT_PART_OF
E_TAB_VALUES = LT_VALUES
E_TAB_VAR_KEYS = LT_VAR_KEYS
EXCEPTIONS
INVALID_INSTANCE = 1
NO_ROOT_INSTANCE = 2
INSTANCE_IS_A_CLASSIFICATION = 3
INTERNAL_ERROR = 4
NO_PROFILE_FOUND = 5
INVALID_DATA = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
RAISE INSTANCE_NOT_FOUND.
WHEN 3.
RAISE INSTANCE_IS_A_CLASSIFICATION.
WHEN OTHERS.
RAISE INVALID_DATA.
ENDCASE.
ELSE.
LOOP AT LT_VALUES INTO LS_VALUES.
IF LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
LS_VALUES-VALUE = '7100010'. "This is test data
MODIFY LT_VALUES FROM LS_VALUES.
ELSE.
DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
ENDIF.
CLEAR LS_VALUES.
ENDLOOP.
ENDIF.
영업정보 특성 변경
CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
EXPORTING
I_CFG_HEADER = LS_CFG_HEAD
I_ROOT_INSTANCE = LS_VBAP-CUOBJ
I_PLANT =
I_STRUCTURE_EXPLOSION_DATE =
I_STRUCTURE_EXPLOSION_APPL_ID =
I_LOGSYS =
IS_PROFILE = LS_PROFILE
IV_ONLY_SINGLE_LEVEL =
IV_HANDLE_APPL_LOG =
IV_OBJECT_APPL_LOG = 'CIF'
IV_SUBOBJECT_APPL_LOG = 'T_CNFG'
IMPORTING
E_ROOT_INSTANCE = E_ROOT_INSTANCE
EV_ROOT_PERSIST_ID = EV_ROOT_PERSIST_ID
EV_CFG_HAS_CHANGED = EV_CFG_HAS_CHANGED
EV_HANDLE_APPL_LOG = EV_HANDLE_APPL_LOG
ET_RETURN = ET_RETURN
TABLES
I_TAB_INSTANCES = LT_INSTANCES
I_TAB_PART_OF = LT_PART_OF
I_TAB_VALUES = LT_VALUES
I_TAB_VAR_KEYS = LT_VAR_KEYS
I_TAB_BLOB =
EXCEPTIONS
NO_CONFIGURATION_DATA = 1
NO_ROOT_INSTANCE = 2
INVALID_INSTANCE = 3
INSTANCE_IS_A_CLASSIFICATION = 4
INTERNAL_ERROR = 5
NO_PROFILE_FOUND = 6
INVALID_DATA = 7
OTHERS = 8
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
RAISE NO_CONFIGURATION_DATA.
WHEN 3.
RAISE NO_ROOT_INSTANCE.
WHEN 3.
RAISE INVALID_INSTANCE .
WHEN 3.
RAISE INSTANCE_IS_A_CLASSIFICATION.
WHEN 3.
RAISE INTERNAL_ERROR.
WHEN OTHERS.
RAISE INVALID_DATA.
ENDCASE.
ENDIF.
COMMIT WORK.
save configuration with next commit
CLEAR: LS_INSTANCES.
READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
L_OWNER-OBJECT_KEY = LS_INSTANCES-OBJ_KEY.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
ROOT_INSTANCE = LS_VBAP-CUOBJ
ROOT_OBJECT = L_OWNER
IMPORTING
NEW_INSTANCE = L_CUOBJ_NEW
EXCEPTIONS
INVALID_INSTANCE = 1
INVALID_ROOT_INSTANCE = 2
NO_CHANGES = 3
OTHERS = 4.
IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
CLEAR LS_VBAP-CUOBJ.
RAISE INTERNAL_ERROR.
ELSEIF SY-SUBRC = 1.
LS_VBAP-CUOBJ = L_CUOBJ_NEW.
ENDIF.
What's wrong?
help me to solve this problem.
Thanks a lot.<b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
<b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
<b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
<b>SD_PARTNER_READ</b> all the partners information and addresses
<b>SD_DETERMINE_CONTRACT_TYPE</b>
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
<b>SD_SALES_DOCUMENT_COPY</b>
<b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod -
Getting iBrowser values in the front end using function
I have created the iBrowser by setting the value to Datalink for defaultitem in iBrowser and i tried to get the values of the iBrowser using function as
function value=Applet.getBrowserObject().getselecteditem();
but it doen not displays any values in browser field in the front end.
Please help me how to get values in the browser.
Thanks,
Rajendra.Rajendra,
You change the function as below and try
function value=Applet.getBrowserObject().getselecteddatalinkvalue();
maybe this works in your case.
Thanks,
Nagi -
Hi,
We have a requirement to create a BI report based on plant maintenance report. The plant maintenance report is based on a ABAP program with complex logic. My question is i want create a Generic Datasource using Function module and can I include the logic(Abap Program) that is used for plant maintenance report in the function module? Please share your thoughts.
Thanks,
RaviHi,
Step1-Create a table structure which you need to create same as the fields you require in you data source.
Step 2-create a custom abap program and inside that call the Client abap program with the selections as required and save the result data in some table
Step 3-create infoset query.In the infoset query give your table structure name and program name which you developed.
Step4-create data source on top of that query -
Decode function involving 2 fields (urgent)
Hi .. I am trying to use the decode function involving 2 fields.
The query runs but does not produce the correct results. If
anyone knows, please reply .. Usually decode function involves
one column only but I have more
than one. The situation is : If ins_code = 2 or special_code =
MMI, put a 'Y', otherwise, it's a 'N'. Does anyone know how to
put this in a decode statement? ThanksThanks, Suresh ... but I have to put this condition using the
decode statement because that's how the rest of the program is
written. It's part of the script that I have to change. The
current statement is this: decode(ins_code, '2', 'Y', 'N'). I
have to change it to ins_code =2 or special_feature = MMI.
Please reply ... thanks a lot.... -
Code For Delta Extraction Using Function Module
Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.Dear KJ,
Thank for your response. I saw the code that you sent, you have used some ztables like ZSC_DELTA_IP, ZSC_SAFETY_DELTA, ZSC_SET_EXT_TIME
What are the fields that you have created in these tables , what is use of these tables, can you send the fields that you have used in these tables.
Thanks & Regards,
SGK
Maybe you are looking for
-
Hyperlinks from Office for Mac don't work after I installed OS Mountain Lion
I installed OS Mountain Lion a week ago. Since then hyperlinks have not functioned from e g Word, Excel or Outlook for Mac. I am running MS Office for Mac 2011. I was earlier using Snow Leopard and did not have any problems with that at all! Needless
-
XL Reporter in Sap 8.8 PL 16running On Server 2008 R2 and SQL 2008 R2
Within the above environment (XL Reporter in Sap 8.8 PL 16 running On Server 2008 R2 and SQL 2008 R2) Xl reporter is loading and appears to work fine until you look at the spreadsheet result It is completely blank except for the titles Yet Excel Ma
-
How to access emails in windows mobile using java?
is there any facility in j2me to access email folders like inbox or sent in windows mobiles? Thanks in advance,
-
Vista Crash. Reloaded but no photo access
Hi, Vista crashed on me and Dell cant fix it so I reloaded Vista and now I have lost all my programs including access to my photos. Can anyone advise. telelo
-
Queue or array which is better?
I need a array of clusters to be stored for which the length is not defined. I will update, Add new element to it. Array or queue can be used to store the clusters. Which one would be better to use in terms of memory usage, fast execution and other p