Using G3 as a hard drive
is there any way that I can use a blue and white G3 to fill with hard drives and then some way plug it into my G5 to use as an external hard drive?
It might be possble but I'm kinda doubtful. I think the target disk mode is a G5 phenomenon that will make the G5 available on older/other Macs but I don't think the converse is true. As a fun experiment I would try the following: Make sure the G3 has FireWire ports and F/Wire 2.3.3 or later. OS X is probably needed too (and probably Tiger) as this ability to function as a drive is most likely not possible in OS 9. Connect it to the G5 and start it up and immediately hit the "T" key (same steps as doing it with a G5 to another Mac). See what happens. If this doesn't work you could probably just let them see each other over a plain ol' Ethernet connection.
Similar Messages
-
I keep my iTunes library on an external hard drive 4TB. It's full. Can I use more than one hard drive to keep my library on? Like two 4TB next to each other.
Create a concatenated disk set
Increase storage space with a concatenated RAID set (also called “Just a Bunch of Disks” or JBOD). If you need one large disk, but you have only several smaller disks, you can create a concatenated disk set to use several small disks as one large disk.
Open Disk Utility, in the Utilities folder in Launchpad.
Select one of the disks that you want in the set, and then click RAID.
Click Add (+), and type a name for the RAID set.
Choose a format from the Format pop-up menu. Usually you’ll choose the Mac OS Extended (Journaled) format.
Choose Concatenated Disk Set from the RAID Type pop-up menu.
Drag the disks you want to add to the set to the list on the right.
Click Create.
Exerpt from:
Disk Utility 12.x: Create a RAID set - Apple - Support
Note that the biggest CON to concatenated RAID configurations is vulnerability to volume failure. If either disk fails, the whole volume fails. If you choose this option, I would highly recommend backing up your music to a cloud service. There are very cheap per GB/storage, and some of the most reputable actually offer unlimited storage:
Five Best Cloud Storage Providers - Lifehacker -
Can I use a PC's hard drive for Time Machine?
I have upgraded my Apple iBook G4 to Mac OS X Leopard and want to take full advantage of all the applications on the OS. I am wondering if it is possible to use a Microsoft Windows PC's hard drive as the medium upon which Time Machine can use to back up my data. I know that external hard drives will work with Time Machine and so will wireless hard drives, such as Time Capsule.
So, would it work if I was to:
1 - Partition the existing C drive in my PC
2 - Share this partitioned C drive on the Network (my PC has wireless card in-built)
3 - Set up Time Machine to recognise this hard disk as a medium which it can use to back up my data
Sorry if this seems like a stupid question, but if there is a chance I can use a PC's hard drive, especially when the existing PC is hardly ever used, as something which Time Machine can use, then it would make sense to use that then spend money on an external or wireless hard drive.No. This is not possible on the PC drive without wiping the drive.
Requirements to use Time Machine
Time Machine is only available with Leopard (10.5.x)
1. External FireWire or USB 2.0 drive
2. Time Capsule
3. Drive shared by a Mac running 10.5 or later using File Sharing
4. Drive shared by a Mac running 10.5 Server
5. SAN volume managed by Apple's Xsan file system
A TM drive must be partitioned with either APM (PPC) or GUID (Intel) and formatted Mac OS Extended (Journaled.) -
I want to use my 1TB Seagate Hard drive for time machine and transferring files from Mac to PC.
For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
Thanks in advance.To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC -
can this device be used as an external hard drive with a macbook pro laptop and use files on the airport time capsule?
If you mean an AirPort base station other than the Time Capsule, it doesn't have internal storage.
If you mean a Time Capsule, its internal drive can be used for regular file storage but shouldn't be; as with all drives, it'll eventually fail. You're better off using a standalone drive and setting Time Machine to back it up as well.
(112309) -
Using a Maxtor external hard drive
I am using a Maxtor external hard drive for time capsule. I have recently re formatted it to use with my new mac and want to know if i delete something off of the hard drive on my mac - will this mean in will be removed from my hard drive too?
Charlie, Welcome to the discussion area!
Do you really mean Time Capsule
or Time Machine? -
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?
Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599 -
Do I need to format my iPod on Windows to use it as a hard drive on a PC?
I use my iPod on a MacBook with my iTunes library, but now want to ALSO use it as a simple hard drive on my PC for files transfer.
In the Windows explorer, I am told that it is not formatted and I am proposed to format it, which would erase all data on it.
Do I need to format my iPod on Windows to use it as a hard drive on a PC?
(I don not have iTunes installed on that PC currently)
And if I have to format it, will all my music be gone, but can I simply then synch it again on my MacBook with my iTunes library?
Thanks a lot in advance.To use the iPod Classic on both the Mac and Windows PC, you need to format it in FAT32 filesystem structure, which both OS can recognise.
Yes, formatting it in FAT32, using iTunes, will erase all music and data in your iPod, but that is no problem if you have all the music in your Mac iTunes library.
So to do this,
Install the Latest iTunes in your windows PC, run itunes and check that all is in order (you can navigate, play some sample songs in itunes.)
Connect your iPod to the Windows PC, USB 2.0 port (please dont use USB hub with iPod Classic, -my bad personal experience, freezing itunes and windows)
iTunes will pop a windows asking you to reformat it in FAT32 and Restore
Click ok. (HERE there maybe some problem, if your iPod hardisk is not in tiptop condition)
When Restore is complete, eject the iPod
Connect it to your Mac and sync iTunes library.
If you want to use the iPod in Windows as an external hd, you have to set it in Disk Mode. first then Windows will recognise it as a portable HD.
Good luck! on this big undertaking. -
How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7. HP computer intel Dual Core. Thanks for any help!
Hey idw3,
Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Regards,
David -
My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?
You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac. -
Using iPod as a hard drive between Mac and PC
I'd like to use my Mac-formatted iPod to back up some personal files om my work PC laptop, and then transfer them to my Mac at home. I need to repeat this process every month or so.
I've enabled my iPod for disk use, but the PC wants to reformat in order to allow me to use it as a hard drive on the PC. However, all of my iTunes and photos and videos are on my Mac at home, and I'd like to keep the iPod Mac-formatted.
There appears to be some 3rd-party software trials out there, but I'm reluctant to download anything that is potentially sketchy.
Advice will be greatly appreciated.
MacBook Pro Mac OS X (10.4.5) Also a PC user (at work)Probably the easiest way to use an iPod on both Mac and Windows computers is to format the iPod (using iPod Updater) using the PC. This will force your iPod to use the Windows file system (FAT32) which both the Mac and PC can read from and write to without the help of additional software. Of course then all your software updates for the iPod will have to be done on Windows.
If you need to use a Mac (HFS+) formatted iPod on a Windows PC, you'll need to install some 3rd party software such as XPlay 2.0 (which you can get from MediaFour Software). This will enable your Windows PC to read a Mac-formatted iPod. -
Get info saying only 108 gb used up on the hard drive, but it's at least 3 times that
Just wondering what the explanation for this could be. When I select the HD icon and choose "get info" in the file menu, it says that the HD file size is 108 gb, with 642 gb available. There is at least (on a rough count) 300 gb used up on the hard drive, with music, photos, movies, documents etc. They haven't been catastrophically erased or anything like that, they're all still there. So why is my hard drive saying only 108 gb used?
TomHave you compared this with what System Information>Hardware>Serial-ATA and what Disk Utility shows?
You might download OmniDiskSweeper from the Internet (free) and open it. This will show all of your files and the respective sizes.
Is your drive partitioned?
I assume you are referencing this dis[play:
Ciao. -
What format i should use for my external hard drive that can be used interchangeably between mac and pc?
Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930 -
what type of hard drive replacement should I use to replace the hard drive on my first generation mac mini model a 1103? G4 1.25 mhz 40 gb hd 1 gb. mem.
You'll need a 2.5" parallel ATA interface hard drive. Most are 5400RPM, forget 7200RPM drives and slower 4200rpm drives. You don't want a serial ATA (SATA) drive, as that has a different connector and won't work.
One source I've used for drives is Newegg, and their parallel ATA hard drives are at http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%2060000344 2&IsNodeId=1&name=IDE%20Ultra%20ATA100%20%2f%20ATA-6 . Newegg also has many user comments about the drives. Other sources are OWC at http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ (Click on ATA on the left) . Look for at least a 3 year warranty. -
Trying to use my Lacie external hard drive to back up my iTunes library.
For some reason, I cannot send my iTunes song files to my external hard drive. My PC recognizes my hard drive (I formatted it) and it lets me save text files to the hard drive but it will not let me save my musci library to it. I am trying to transfer my iTunes library from my PC to my new Mac laptop and also just wanted to back up my iTunes library. Any help would be great.
You can Use iTunes for Backing up your Music, but I do not favor this mehtod.
It works fine for music files BUT: I prefer more control and completeness over my backup process. It is also very important to note that a large limitation of using iTunes to manage the backup is that the iTunes method does not create or maintain backups of the two meta-data files (iTunes Library.itl & iTunes Music Library.xml) where your Playlists, Ratings, Play Counts, etc. are stored. See: What are the iTunes Library files?
If you are heavily invested in your Library data (Playlists, Play Counts, Ratings, Last Played, Date Added, etc.), it is crucial that you also make and archive multiple backups of your ‘iTunes Library.itl’ file.
If your music is located under one common Folder (e.g.-‘iTunes’), then it is easiest to physically copy that folder and all its sub-folders in one simple process. It can be done quickly, and incrementally – several times a day, when necessary. In the case of any data loss, just re-copy your entire (or partial) music library back to wherever it was, placing it in the main Folder that the previous iTunes expected. Along with the ‘iTunes Library.itl’ metadata file, this completes a full ‘restore’ of your music to the time of your last backup.
Use of a backup software program will greatly help. It will allow you to easily perform incremental backups of only the files that have changed. WinXP has such a facility built-in. I use a free program called FileSync ( http://www.fileware.com ). There are many out there. Some use Zipped files or proprietary formats, others use standard file formats. I like FileSync as it uses normal file formats that can be viewed/managed via any Windows program or utility.
iTunes Files to Backup (anytime you make additions or changes to the Music or Library that you want to retain)
1) All music files in their current folder structure (usually located in and under the ‘iTunes Music’ folder)
2) The Library database file: ‘iTunes Library.itl’ located in the ‘iTunes’ folder
3) The Library XML file: ‘iTunes Music Library.xml’ located in the ‘iTunes’ folder
4) Any XML playlist files created for Playlist retention
5) The two iTunes.pref files (optional)
-- C:\Documents and Settings\<your username>\Application Data\Apple Computer\iTunes\iTunes.pref
-- C:\Documents and Settings\<your username>\Local Settings\Application Data\Apple Computer Inc\iTunes.pref
6) The XML file of Ratings, Play Counts and Last Played attributes saved from the main Library and created by Otto’s SaveRatings script (also optional, but recommended):
“Download this: http://ottodestruct.com/itunes/SaveRatings.zip . It's a program, just run it like any other program. Run it on the machine where you're copying the info from BEFORE you move the files to the new machine. Click the "Save Ratings" button and it'll create a ratings.xml file. Now when you move the files, move the program and this file as well. Then after you make your new iTunes library, run it again and click the "Restore Ratings" button. Voila, all your information is back in the Library. Well, most of it anyway, it's not perfect. It'll tell you what songs it couldn't figure out though, and there's usually not very many.”
Here's a list of possible ways to copy your music files from your main iTunes computer to another storage medium for backup purposes.
1) Use an External Hard Drive to store the complete iTunes meta-data files and underlying Music Folder structure and songs from your main computer. They are quite cheap now, for their storage volume. This is my preferred main medium.
2) If you have Two Computers:
2a) Connect them through a router
2b) Connect them using a Direct (w/Mac) or Crossover (PC/PC) Ethernet cable (See: http://www.ifelix.co.uk/tech/3001.html)
2c) Connect them via a USB-to-USB Network Bridge. See: here as an example.
Copy the files and folders from one computer to the other. Use the second PC as your backup repository.
3) Burn several DVDs (at 4.7+ GBs each) with the music data files and store them safely. Re-writable ones are good for backup purposes (if your DVD drive can manage these).
4) Burn 6x more on CDs (at 700MB each) than in #3 above and store them safely in more space Re-writable ones are good for backup purposes (if your CD drive can manage these).
5) Use a larger USB Flash drive (1GB – 4+GBs) to store the files only if you have a small amount ripped music or have multiple and/or jumbo USB drives at your disposal that will fit your music library.
6) Use the Second Internal Hard Drive (if available) of your PC -- not optimum, as you really want to physically separate the storage of backups from the originals, but good as a tertiary storage device.
By keeping only one copy of your music (other than on the iPod), you are not truly 'backed-up' and are running a high risk of losing your music. Music files on just the iPod and the computer is not considered having any backup. If you cannot store your complete music files on the computer’s internal HD, then create and maintain at least two external sets (any multiple combinations of ExHDs, DVDs, CDs).
You need at least two full sets of your music, not including what is on the iPod:
-- One full set on the PC within iTunes (on internal HD or ExHD)
-- One full set on an separate external backup medium (CD/DVD/ExHD/other)
-- One (full or partial) set on the iPod
It is a good policy to backup all your important data. It is a very smart policy to back it up on more than one medium.
Maybe you are looking for
-
Hi, I am writing a small webcrawler in java.I am searching the webpage for a particular hyperlink(based ont he text).Can i get the text associated with the hyperlink using the URL class?.I am able to get the url the hyperlink is pointing to , but not
-
Dear Experts, My B1 is 2007B PL08. Document setting is Rounding by currency. My local currency is NTD. Amount decimal is 0, price is 2. My FC is USD, I would like the price decimal is 3, and amount is 2. I know the system defi
-
Merge to HDR Pro, Photoshop CS5 Mac
Hello, I'm using Photoshop CS5 Mac. When I select "File>Automate>Merge to HDR Pro->" then Browse to "Adobe Photoshop CS5>Samples>Merge to HDR" and select the 4 jpg images, Photoshop merges the images and opens a window that says Merge to HDR (xx%) at
-
Do I really need to sign my VSTO Add-in Click Once Manifests?
When I worked on our Excel Add-in project, I remember getting some compiler error or warning in VS 2012 (I don't remember the exact wording or why it manifested) but it was something along the lines of the Click Once Manifests needed to be signed. At
-
Xcode error - trouble with framework
Hi All, A little background: I am trying to build an application using Ogre which is a gaming engine. As part of the instructions for installation on a mac it says to open some project and build it. This is supposed to make a framework called Ogre.fr