Using G3 install disc on a G4

I bought my iBook used and still have the previous owner's passwords installed on it.
this makes life a little difficult so I would like to re-install using the install disc that came with my old G3 iBook.
will this work or do I have to find a G4 install disc?
additionaly, since this particular model only has a CD-ROM reader and no DVD reader, will this present a problem?
thanx in advance.

If the iBook is an "education" configuration it has only a CD-ROM drive. Your best bet is my previous suggestion. If the original owner can't provide the install discs, Apple can. They'll sell you a set of Restore Discs at a lesser price than Tiger ($129 + 9$9.95 for the CD set).
John

Similar Messages

Need to figure out how to remove an unknown admin password on a mac. used the install disc with not luck. tried some commands in single user mode, no luck.

need to figure out how to remove an unknown admin password on a mac.
used the install disc with not luck. tried some commands in single user mode, no luck.

need to figure out how to remove an unknown admin password on a mac.
used the install disc with not luck. tried some commands in single user mode, no luck.

Can I restore just one app. using the Install disc, or must all items be restored?

Can I selectively restore just one app. using the Install disc, or will all items be automatically restored?

Thanks BDAqua;
This is my first time using the forums, so I am not certain about protocol. However, your quick reply is appreciated.
miltc
BDAqua wrote:
Hi , and a warm welcome to the forums!
Get Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc.

Express Lane advised that I use the Install Disc to fix a problem. I inserted the disc, pressed C as advised and restarted, nothing comes up, the computer just goes on and off - any advise on starting the laptop and getting the disc out?

Stuck in restart mode -- Express Lane advised that I use the Install Disc to fix a problem. I inserted the disc, pressed C as advised and restarted, nothing comes up, the computer just goes on and off - any advise on starting the laptop and getting the disc out?

You insert the disk and restart while holding down the 'c' key until you see the apple and spinning cog. Is that precisely what you did?

I have a blue screen on mac pro 6.2. OSX 10.6.8. I got into the computer using safe mode. I beleive I need to restore using my install disc. How do I restore? Is there an internet address to look up how to restore?

I had a blue screen on my MacBook pro 6.2 with operating system OSX 10.6.8.
I got into the computer using safe mode but could open any applications. I think I need to restore with my install disc. How is this done? Is there a web address for instructions?

http://pondini.org/OSX/Combo.html
http://www.wikihow.com/Reinstall-Mac-OS-X-(Leopard-and-Earlier)
Mac OS X v10.6 Snow Leopard: How to Erase and Install - Apple Support

I turned auto login off and set a password. It does not work. I tried using the install disc and C key a few times but no success. Now the install disc does not even activate with the C key. Help

I turned ato login off. Set a password. On login it failed. Perhaps I misstyped when setting up. I used the instaldisc to reset the password but after a few attempts It failed. Was it a mistake to select the hard drive after resetting the password. I would like to try the alternative but now the C-key does not even let the install disc open, it goes directly to the name and password screen. I need Help

Keunepete,
When I ordered my books for the ICND1 and ICND2, they came with a CD in the back pocket (sleeve) of the book. Along with the CD was a thick piece of paper that had the activation code on it. It was a white, square piece of paper with big black print on it. Did you buy your book used? Was the CD sealed in the back pocket?
-Zach

Reinstalling Tiger using a install disc from another mac?

I have 2 macbook pros. A brand new one with the Santa Rosa chip and 1 with the older chip. Can I use the disc that came with the new mac with the newest version of OS and other programs to update the older macbook pro?
Thanks.

rick.pearl wrote:
Does this mean that I shouldn't use the Generic Tiger install disc to reformat the macbook pro either? Would I be missing drivers or anything by doing this?
Well, if by "Generic" you mean the boxed retail version of Tiger, you wouldn't be able to boot from it. No boxed retail Tiger has the Intel software or drivers necessary to boot an Intel Mac. Only the discs shipped with Intel CPUs have the Intel OS on them.
Presumably this is not the case with the Leopard discs, which must have the code for both architectures...
charlie

Reinstalling OS X using original install discs

In preparation for giving away my old iMAC PPC, I followed the instructions for zeroing all data using the original install discs. I then wanted to reinstall OS X. Again, using the original install discs, disc #1 did it's thing perfectly. When prompted to insert install disc #2, nothing happened. In checking what's on disc #2...and disc #3 for that matter...it appears there's nothing but a text message on 2 and 3 indicating that I should insert install disc #1. In looking at the computer's System Profiler, apparently OS 10.3.7 has been installed. Does this mean I'm done and that install discs 2 and 3 are not necessary?

When attempting to reset my password using the Install disc, I can't get into the system since I am asked for my password when I initiate the disc. What now?

I lost my MAC password and was advised to use the "MAC" install disc. With the "install disc" installed, I initiate the program and it asks for my "password" to continue. What do I do now since I am unable to offer the correct password. Sure would like to discuss this with a computer expert. I am really frustrated since I can't update programs due to the lost password?

First, make sure caps lock is not on.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.

Can I use the install disc from my macbook to upgrade my imac from Tiger?

I have an imac which is on Tiger. I recently bought a macbook which is on snow leopard. I have the install discs for Snow Leopard and I was wondering if I could use them to upgrade my imac.
Also, if I can, will it delete existing files and software that's already on it?
Thanks.

No. Besides being illegal the DVD that came with MacBook are hardware specific to it and will either not work at all or not work properly if you attempt to use them on the iMac.
Just go out and buy the $29 DVD for Snow Leopard. It is easier that way.
Allan

Keyboard shortcuts using the install disc

my trackpad is malfunctioning (out of applecare and don't have the money to get it repaired, otherwise, my machine works fine), so i can't use it when i want to use disc utility (for routine maintenance) from my original install disc.
are there keyboard shortcuts that will get me from the install screen thru to the disk utility functions: varifying and repairing permissions and disks?

Not that I know of. How about a cheap mouse--or even borrow one.
There's no way you're going to effectively use OS X without a pointing device. It isn't designed to be mouseless.
I don't know what your budget is, but I would assume getting the trackpad repaired would be a lot more than the $70 for a Magic Trackpad.
And, if your Macbook is so old that it doesn't have multi-finger gestures, the Magic Trackpad is very nice.

Exactly how do you use OSX install disc to erase start up disc

Cannot get OS X install disc to erase start up disc. I restarted holding down c key, but install disc keeps ejecting.

Sop, are you OK now?
10.4.7
Disk 1 2Z691-5859-A, Disk 2 2Z691-5862-A ...
for 17" iMac (Late 2006) Intel Core 2 Duo 2.0GHz, 2.16GHz, 20" iMac (late 2006) Intel Core 2 Duo 2.16GHz, 2.33GHz
Disk 1: 2Z691-5859-A
Disk 2: 2Z691-5862-A
Compatibility
eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), MacBook (13-inch), MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD)
http://www.welovemacs.com/2z6915862a.html

Creating a bootable Lion install disc/disk and using it

Hi all,
Below is a copy of a method ds store posted for creating a bootable Lion install disc. Some questions:
1. Is this a polished final version of the process, or are there other steps which could/should be added?
2. Are there any disadvantages to going this route instead of installing directly onto a Mac?
3. After creating a Lion install disc/disk via this method and using this saved dmg to install Lion on a Mac, will it set up the Mac exactly the same way it would by downloading/installing directly from the Apple Store (sounds like a "duh" question, but nothing would surprise me with Lion)?
4. Exact size of this dmg (in case I want to use a flash drive instead)?
I have been avoiding Lion, hoping it would shape up. I'm still not satisfied and will not run it on my main machines. (Of course ymmv; I'm not looking to be talked into or out of using Lion.) However, I am ******* (hmmm, I guess l-u-s-t-i-n-g is a bad word!) over a new Mac Mini, which will have Lion installed, with no chance of running SL on it due to the new hardware revision. Thus, I'm either going to have to make peace with Lion or forget about a new Mini. I guess I'll have to give Lion a try, but I still don't want to actually run it on any of my machines; thus, I want to run it from an external drive, playing with it as I have time/desire, leading to more questions.
5. Using the install disc/disk created above, will it set up Lion on a DVD, flash drive, or external HD exactly as it would on a Mac (Recovery Disk, etc.)?
6. How much space is needed on a destination disc/disk to install Lion?
7. Is it possible to boot from a different volume, mount this dmg, and install Lion from it?
8. Any advantages/disadvantages doing it this way (#7) as opposed to booting from the Lion install disc/disk created above?
9. Another method I'm thinking of using is to (after cloning my SL installation) actually install Lion on my MBP over my current SL installation (shudders violently ), clone it to an external HD, then erase/zero the MBP's HD and clone my SL install back to my MBP. Has anyone done this? Again, I'm concerned that Lion will do something goofy and leave some kind of footprint behind, like maybe messing with firmware; cloning my SL installation back to my internal HD would not reverse a firmware change.
10. Any constructive suggestions on anything related to any of these steps is welcome!
Yes, I've searched and read a number of responses, but I'm hoping much of the "discovery" phase is over, and there are some "solid"/refined answers by now. My bottom line is to be able to play with Lion without having to depend on it.
Thanks!
Backup Lion Bootable 10.7 Disk
Purchase and download Lion from the Mac App Store on any Lion compatible Mac running Snow Leopard.
Right click on “Mac OS X     Lion”     installer and choose the option to     “Show Package Contents.”
Inside the Contents folder     that     appears you will find a SharedSupport     folder and inside the     SharedSupport folder     you will find the “InstallESD.dmg.” This is         the Lion boot disc image we have all been waiting for.
Copy “InstallESD.dmg” to         another folder like the Desktop.
Launch Disk Utility and click     the     burn button.
Select the copied “InstallESD.dmg” as the image to     burn,     insert a standard sized 4.7 GB DVD,     and wait for your new Lion Boot     Disc to come     out toasty hot.
With this disc you can boot any Lion compatible Mac, andinstall10.7 just like you installed previous version of Mac OS X. Youcan even use Disk Utility's Restore function to image your Lion bootdisc image onto a external drive suitable for performing a cleaninstall on a optical-drive-less MacBook Air, or Mac mini server.

tjk wrote:
5. Using the install disc/disk created above, will it set up Lion on a DVD, flash drive, or external HD exactly as it would on a Mac (Recovery Disk, etc.)?
DVD: no, flash drive: if it's large enough, external hard drive: yes
6. How much space is needed on a destination disc/disk to install Lion?
Whatever Apple minimum requirements are.
7. Is it possible to boot from a different volume, mount this dmg, and install Lion from it?
possibly, never tried it, it is a dmg so it's a volume all to itself, except it can't install to the same media it's on and can only install to something formatted with GUID and a OS X extended format, like a flash drive or hard drive large enough.
DVD's can't be formatted with a GUID EFI partiton
8. Any advantages/disadvantages doing it this way (#7) as opposed to booting from the Lion install disc/disk created above?
Speed limitation of the media and bus your using, USB 1 is a slower than a hard drive with 7,200 RPM on a Firewire 800 port
9. Another method I'm thinking of using is to (after cloning my SL installation) actually install Lion on my MBP over my current SL installation (shudders violently ), clone it to an external HD, then erase/zero the MBP's HD and clone my SL install back to my MBP.
The problems come from installing Lion over a existing Snow Leopard setup that isn't quite pristine enough for Lions quirkyness, has tweaks or other software installed that breaks 10.7, requiring you to fix it.
You can try it, you've got the 10.6 clone to option boot off of and restore from.
Cloning back and forth is a performance enhancer, not a problem solver.
Ideally it's best to clone 10.6, disconnect, zero and install 10.6, same user name, then up to 10.6.8, then to 10.7, then install programs from fresh sources/copies and then files returned last from backup off the clone (no migration assistant or it brings trouble back)
This will ensure the best possible performance possible with the least trouble as everything is wiped and installed fresh. Only problem being your files it there is something wrong with them, which is easy to remedy to the cause as it's the only thing not pristine.
Once you've got a pristine system, then clone that twice, once for a immediate update other for falling back a week, two weeks or even a month back.
Has anyone done this? Again, I'm concerned that Lion will do something goofy and leave some kind of footprint behind, like maybe messing with firmware; cloning my SL installation back to my internal HD would not reverse a firmware change.
Firmware is hardware specific not OS specific, of course it's possible a old version of a OS won't work with newer firmware, like 10.5 for instance perhaps because Apple has dropped all work on PPC code.
10.6 and 10.7 are just fine with most all present firmware, however there will be a time where a new firmware update could disallow 10.6, likely when iOS X 10.8 Bobcat arrives.
10. Any constructive suggestions on anything related to any of these steps is welcome!
Yes, I've searched and read a number of responses, but I'm hoping much of the "discovery" phase is over, and there are some "solid"/refined answers by now. My bottom line is to be able to play with Lion without having to depend on it.
Cloning only clones the Lion OS X Partition, not the Lion Recovery Partition.
A comptuer that is Lion capable will boot off a media with no Lion Recovery Partition.
You need to create a Lion Disk Assistant USB which copies your Lion Recovery Partition.
It's in my post.
https://discussions.apple.com/message/16276201#16276201

Can I use my Tiger install disc on more than one computer

I have a Powermac G4 15" and an imac G4 17". The p-mac has Tiger and the Imac has Panther. Can I use the install disc that came with the p-mac to install Tiger on the imac?
Thanks for a great forum!
G4 Mac OS X (10.4.5)

Welcome to Apple Discussions!
PowerMac G4s never were 15". Don't you mean Powerbook G4 15"? If you mean Powerbook G4 15" and it came with Tiger, then the answer is no, as my FAQ explains:
http://www.macmaps.com/upgradefaq.html#SYSTEMSPECIFIC
If you mean a PowerMac G4 with a 15" Apple LCD, it may have come with an older operating system. Use the articles I link to on:
http://www.macmaps.com/macosxnative.html#IDENTIFY
to identify your Mac.
And use
http://docs.info.apple.com/article.html?artnum=25517
to determine which operating system came with that Mac.
If both machines came with pre-Mac OS X 10.4, they can use a Mac OS X 10.4 Family pack if they meet specs for the installation.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Reset password using install disc

I haven't used my iMac for years and now want to pass it on to my son.
I don't remember my administrator password. When I start up using the install disc and go to Reset Password only the install disc is displayed.
What do I need to do to get the hard drive Macintosh HD to display so that I can reset my password on it?
Thanks. Jay.

There are situations where that utility will not work, such as if there more than on admin account or if the current admin account is NOT the original admin account. Also, it may not work if the currently installed Mac OS X system is not the version on that installation disc.
Wouldn't it be better if you just use that install disc to run Disk Utility, erase the internal drive, and installed a fresh system?

Using G3 install disc on a G4

Similar Messages

Maybe you are looking for