Using GB3 as Rewire Host

I just found out that you could use GB as a rewire host, and since I just purchase Reason, this is pretty exciting. I just tried it with the basic songs in each (the demo song in Reason) and a blank song (just the piano) in GB. While the transports can control each other, I can't hear the audio from the Reason song. However I can hear the piano in Garage band. I'm just using the built-in audio for testing purposes. Do I have to establish a track for Reason in GB? If so, is it Real or Software, and which subcategory?
Very excited about this, TIA!!
-db-
powerbook 15.2 Mac OS X (10.4.8) Powerbook 15.2, 1.5Ghz 1GMem, 165G Drive.

I found that my rewire worked up until updating to Ableton Live 5 series and then the sound bombed out on me. Thank you for your advice, I found that the Preference folder in users\library\preferences folder was where the fault was. Removed it like you said and Reason was back to it's old self again..
Do You know of a fix whereby these two programmes can co exist on my mac?
Thanks..

Similar Messages

  • I had a iPhone 3G and I change it in to a iPhone 4G 32GB! I have 3 apple ID account. The one I used is edited by host and I know my password but it ask me for my security question and I forgot it! It send a veify email the answer the an email to blu

    I had a iPhone 3G and I change it in to a iPhone 4G 32GB! I have 3 apple ID account. The one I used is <edited by host> and I know my password but it ask me for my security question and I forgot it! It send a veify email the answer the an email to <edited by host> and the email <edited by host> that is my other  apple ID and the password work on apple but my yahoo account I forgot my password and security question and it won't   verify to my email on to my apple email. so it  send the answer  to  <edited by host> and I can't get it! So Can u do something? Both account r also on my iCloud. I can open both apple account but it won't let me buy nothing on my <edited by host> ! On my <edited by host> that one dose let my buy thing but I had lot of thing I bought on <edited by host> I  bought lots of movies music and app. I spend lot of money on this account.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

  • I need to clarify how I can use adobe as a host for my site for free. I see where business catalyst is supposed to be temporary as well as it is recommended to use as the better alternative to launch my muse site. But then I have to use the long

    I need to clarify how I can use adobe as a host for my site for free. I see where business catalyst is supposed to be temporary as well as it is recommended to use as the better alternative to launch my muse site. But then I have to use the long extension of "businesscatalyst" in addition to the domain name I'd prefer. How exactly can I take it live? do I have to use a third party hosting?

    Hi,
    Once you are done with your sitet, Click on Publish in Muse, select New Site from the drop down, It will ask you a name for your site, which will be used for  site url, you will get a url like mysite.businesscatalyst.com, then go to the browser and login to the admin panel, mysite.businesscatalyst.com/admin and on Dashboard, click Launch site. This will push your site live, and you can then add your custom domain.
    Also make sure that you have completed all these actions mentioned here
    User manual
    Do let me know if you have any question.

  • Using  javascript  in windows host scripting to communicate with java class

    Hi,
    I have to use a legacy system that works on a windows platform.
    the system uses javascript to perform the logic.
    I wouild very much like to remove the javascript from the equation but cannot !
    however I presume that the javascript could delegate the logic to an underlying java object (this is not a web application mind you so the java script is not document based and I cannot use applets).
    I know that Rhino and Ojs have this abilitiy but as the legacy system uses the WHS that is what I need to use too.
    In other words, how do I invoke java methods belonging to pure java objects from within a javascript file using the windows scripting host interpreter ?
    thanks very much in advance.

    Hi,
    I have to use a legacy system that works on a windows
    platform.
    the system uses javascript to perform the logic.
    shudder
    [snip]
    In other words, how do I invoke java methods
    belonging to pure java objects from within a
    javascript file using the windows scripting host
    interpreter ?
    shudder
    as the previous poster said, you likely need to wrap your Java classes in some COM object. But why are you wanting to introduce this additional complexity into your system?

  • Our organization uses an Oracle database hosted on a Unix platform and one of our data processing outputs is a "stuffer" document that has a barcode, and Unix jobs automatically send the document to a printer.   Is there a way, or does Adobe have a produc

    Our organization uses an Oracle database hosted on a Unix platform and one of our data processing outputs is a “stuffer” document that has a barcode, and Unix jobs automatically send the document to a printer.
    Is there a way, or does Adobe have a product or solution, to create a PDF version of the document including the barcode, before it’s sent to a printer?

    What format is the document that is printed? Or what technology is used to format the printer? There isn't a standard way of doing things in Unix.

  • Is anyone using the Illustrator CC host adapter on Mac?

    I'm not able to successfully use the Host Adapater for Illustrator CC on Mac OS.  It's working on Windows and on earlier versions of Illustrator.  I'm using Illustrator CC 17.1.0 and Mac OS 10.9.1. 
    Is anyone else successfully using the Illustrator CC host adapter plugin on Mac OS? If so, where did you get the host adapter plug-in from, and did you have to do any special "tricks" to install it? 
    I created a new Extension project in Extenion Builder (licensed copy of EB 2.1), selecting the options to use the Illustrator host adapter libraries.  My extension just has a button that calls the AIEventAdapter.pingPlugIn() function and a list box to show the results (i.e., "pingSucceeded" or "pingTimedOut").  I then used Extension Builder to Export the project as a ZXP and sign it (with a self-generated certificate).  I then installed the test Extension with Extension Manager on my Mac.  All of this completes without any errors, and the AIHostAdapater.aip is in the correct Illustrator Extensions folder.  But when I run the Extension the pingPlugIn() function always returns with the "pingTimedOut" event.  The same Extension correctly results in the "pingSucceeded" event on Illustrator CC on Windows or for earlier versions of Illustrator on both Windows and Mac OS.
    Is there a known problem with the Mac OS version of the Illustrator CC host adapter plug-in?  Or an updated version somewhere?
    Thanks.

    For someone facing loading issues of AIHostAdapter plugin in CC2014, you can download the same from the following URL
    https://github.com/timothybrandspencer/CEP-Resources/tree/master/host_adapters/illustrator
    Thanks,
    Manan

  • Which localhost line shuold be used in the /etc/hosts file on Solaris Sparc

    Hi There,
    I would like to know which line should be use in the /etc/hosts file:
    127.0.0.1 localhost
    127.0.0.1 localhost.localdomain localhost
    Thanks :-)
    J

    user560159 wrote:
    Hi There,
    I would like to know which line should be use in the /etc/hosts file:
    127.0.0.1 localhost
    127.0.0.1 localhost.localdomain localhost
    Thanks :-)
    JThe format for the hosts file is
    ipaddress alias1 alias2 alias3 alias4 Most shops will just have two aliases, one with just the machine name, one with the fully qualified domain.machine name. In reality, you can do whatever makes sense:
    [root@vmlnx01 ~]# cat /etc/hosts
    # Do not remove the following line, or various programs
    # that require network functionality wil fail
    127.0.0.1       localhost.localdomain localhost
    [root@vmlnx01 ~]# ping localhost
    PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
    64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=1.96 ms
    [root@vmlnx01 ~]# ping localhost.localdomain
    PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
    64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.094 ms
    [root@vmlnx01 ~]# vi /etc/hosts
    <<<< adding an alias 'fred' >>>>>
    [root@vmlnx01 ~]# cat /etc/hosts
    # Do not remove the following line, or various programs
    # that require network functionality wil fail
    127.0.0.1       localhost.localdomain localhost fred
    [root@vmlnx01 ~]# ping fred
    PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
    64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.306 ms
    64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64 time=0.093 ms
    64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=64 time=0.092 msDoes the order of the aliases have any meaning? I leave that quick experiment as an exercise for the student.

  • Is it legal to use Macintosh virtual machine hosted by Windows operating system? If yes, please suggest recommended hardware and license cost?

    Is it legal to use Macintosh virtual machine hosted by Windows operating system? If yes, please suggest recommended hardware and license cost?

    steve359 wrote:
    I thought that at least some version of OSX could not be VM in Mavericks, but if you say it is allowed so be it.
    There are some people who dispute the details of what "the software" means in the license. From my point of view, I have a license to run all of those versions each license explicity says I can use a VM. I don't think it is illegal or even unseemly. The only version restriction I know of that the new VM policy only applies to Lion or greater. 10.6 could only be run on a VM if you had the expensive server version. The licenses do explicity list the acceptable uses and that includes OS X Server, software development, and non-commercial use. They don't want people selling online access to OS X, that's all.
    I do not VM Windows on my MBP because I have no need.
    Me neither. I used to though. Funny how a Mac was the most critical tool in debugging web sites on various versions of IE
    I don't even run OS X in a VM anyway. It does work but it is quite resource intensive. Maybe if I had one of those new Mac Pros...

  • I made a free website using iweb and my host is dropbox but it is not showing in every search engine,i have to use a proxy for my site to pop up

    i made a free website using iweb and my host is dropbox but it is not showing in every search engine,i have to use a proxy for my site to pop up

    Possibly because dropbox is not really a proper webhost - it might be better if you went and signed up for proper web hosting from somewhere like http://www.godaddy.com or http://www.hostexcellence.com.
    Have you told Google that you site exists?  If not, then you need to do so - http://www.google.com/addurl.

  • TS2580 I am attempting to use a 3rd party host to publish web site designed from I-web. The main page of the site is asking for host IP address, etc.  I've got all that, except it is asking for Directory/Path.  To what is this referring?  Thanks!

    I am attempting to publish a web site designed on i-web using a 3rd party host.  The main page of my web site is asking for IP address of host, etc.  I have all that, but it is asking for Directory/Path.  To what is this referring?
    Thanks.

    The directory/path is the path to the root folder and, in most cases, should be left blank...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html

  • Anyone use STARLOGIC as their host?

    Hello does anyone use startlogic as their host?
    I just signed on with them and I cant get dreamweaver to
    hookup to the site via FTP. Does anyone know how to do this
    successfully?
    I already tried and I keep getting an error that says the
    folder doesnt exist or it says there could be a permission problem.
    Its very frustrating. Startlogic told me its an "adobe problem", so
    if anyone knows how to setup dreamweaver via FTP to thier site,
    please share!!!
    Thank you very much.

    Access FTP of course, should have mentioned it anyway
    Jo
    "josie1one" <[email protected]> wrote in message
    news:fiorr8$2h9$[email protected]..
    >I have an account with them - and as Alan suggests, they
    use public_html.
    >In my site definition remote server info I have:
    >
    > FTP host: st52.startlogic.com
    > Host directory: /public_html/ << note essential
    slashes
    > Login info: - whatever they gave you
    > Password: whatever - it might not be exactly what you
    chose - they knocked
    > off the last character on mine so it's worth checking
    the correspondence
    >
    >
    > --
    > Jo
    >
    >
    > "texjgc" <[email protected]> wrote in
    message
    > news:finek5$e9s$[email protected]..
    >> Hello does anyone use startlogic as their host?
    >>
    >> I just signed on with them and I cant get
    dreamweaver to hookup to the
    >> site
    >> via FTP. Does anyone know how to do this
    successfully?
    >>
    >> I already tried and I keep getting an error that
    says the folder doesnt
    >> exist
    >> or it says there could be a permission problem. Its
    very frustrating.
    >> Startlogic told me its an "adobe problem", so if
    anyone knows how to
    >> setup
    >> dreamweaver via FTP to thier site, please share!!!
    >>
    >>
    >> Thank you very much.
    >>
    >
    >

  • I use a IP.board hosted forum, and for some reason the editor tool icons will not show of Firefox. I haven't had this problem until about 2 days ago.

    I have been regularly using an IP.board hosted forum on Mozilla and it has been working fine until as of 2 days ago I suddenly unable to see the post editor icons.
    I looked and found a similar problem as addressed here: https://support.mozilla.org/en-US/questions/971904
    unfortunately, that remedy given there did no work for me.
    ,Thank you

    What do you see instead of those icons?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    If you see little boxes that show the hex code of the characters then those missing icons are actually supplied by a font that is downloaded from the server (@font-face)
    Make sure that you allow pages to choose their own fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
    You can check the <b>gfx.downloadable_fonts.enabled</b> pref on the <b>about:config</b> page and make sure that it is set to true (if necessary double-click the line to toggle its value).

  • Using Name-based Virtual Hosts on Apache

    Hi!
    We have Novell SBS 6.5, a tree with 3 servers:
    1. Border Manager sp1
    2. GroupWise (NAT) sp1
    3. WEB (NAT) sp6 - Apache 2, MySQL, PHP.
    My site is at http://www.kalmanovitz.co.il.
    I want to try to add a new sub domain and\ or a Domain using Name-based Virtual Hosts (2 or more domains on same IP number).
    1. My BM server use SSL. Will it influence SSL? How?
    2. What I need to change on my servers?
    3. What my ISP need to update\change on his system?
    4. Can i try to experience the changes without my ISP intervention?
    Please help.
    TIA
    Nanu

    Nanu Kalmanovitz,
    > 1. My BM server use SSL. Will it influence SSL? How?
    Not protocol wise, but you will get asecurity warning that certificate
    and host names do not match.
    > 2. What I need to change on my servers?
    Httpd.conf
    > 3. What my ISP need to update\change on his system?
    DNS, pointers to the domains
    > 4. Can i try to experience the changes without my ISP intervention?
    >
    Yes. Add the names to the workstation's hosts-file
    - Anders Gustafsson, Engineer, CNE6, ASE
    NSC Volunteer Sysop
    Pedago, The Aaland Islands (N60 E20)
    Novell does not monitor these forums officially.
    Enhancement requests for all Novell products may be made at
    http://support.novell.com/enhancement
    Using VA 5.51 build 315 on Windows 2000 build 2600

  • Extended Notifications with Links while using Citrix to Access Hosted SAP

    Hello,
    I am working on a system which is hosted remotely where Citrix and Single signon are used to access the SAP instance.  I need to be able to send email to their Outlook server with executable links back to the workitems.  I had planned to use Extended Notifications to get this done.  I am fine with everything except for the Citrix link.  I am not sure whether the link in the email will be able to find its way through Citrix to the SAP instance.  I also need to know the SSO is going to work - it seems at a minimum they would need to sign on to Citrix.  Has anyone out there done this, or at least know whether it would/should/won't work?
    Thanks in advance for any help you can offer,
    Jeff Gray

    As far my knowledge, on Citrix it won't work. As far portal is concerned, it will work.
    Regards, IA

  • Iweb double-url is still showing even though I'm using a 3rd party host

    A client of mine created and published a site in iweb.....she didn't even have hosting, so does iweb host files in the cloud? I deleted the site in her iweb app, changed the DNS, edited the domain file, updated to a 3rd party host, checked idisk, but im still getting the double-url (www.mysite.com/www.mysite.com/index.html/) crap that iweb does....it's like iweb is overriding everything else no matter what I do....there was an index.html file that was re-directing to the double-url, which i also promptly deleted...still no change....for the life of me I can't get just a normal URL (www.mysite.com) without having the additional url that iweb adds....I have no idea how to get rid of this....even with a fresh host, it still shows up.....anyone have any ideas other than scrapping the URL and finding a new one? I've never used iweb, but I've been doing web design for 5 years and i've never seen anything like this.....on a wordpress install, the URL works with the additional crap added, but there is some trouble when trying to set a 'home' link...I get a cgi-sys/defaultwebpage.cgi error....which is problematic....when trying to get back to the homepage.....

    The iWeb Domain file is just a package where the website data is stored. Once the site is published, iWeb isn't in the picture...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    iWeb publishes a folder containing all the files for the website and an external index.html file. Unlike most websites, the index.html file is just a redirect to the Home page which is the one at the top of the list in the iWeb sidebar.
    There's also a copy of the index.html file inside the folder. This arrangement is so that the site will work on Apple's - soon to be defunct - server MobileMe. Perhaps this is where you client published the site?
    Its not quite clear how you are trying to conect the site to Wordpress. Can you explain?
    If an iWeb site is published "as is", the URL for any page is...
    http://www.domain-name/folder-name/page-name.html
    ... where "folder-name" is the name of the site in the iWeb app which can be seen at the very top of the left column above the first or Home page name.

Maybe you are looking for