Using GF 680GTX 4GB with Premiere Pro CS6

I am thinking in buying the GF 680GTX 4gb to use it with Premiere Pro CS6, but I've just discovered it's not compatible as a GPU Accelerator. Is there any way I can make it work with the program? Thanks in advance!

Yes... I run one and it works fine.
How To Enable GPU Cuda in Adobe CS6 for Windows
http://forums.adobe.com/message/4552694

Similar Messages

  • Need help with premiere pro cs6 having performance issues please help

    need help with premiere pro cs6 having performance issues please help

    Welcome to the forum.
    First thing that I would do would be to look at this Adobe KB Article to see if it helps.
    Next, I would try the tips in this ARTICLE.
    If that does not help, a Repair Install would definitely be in order.
    Good luck,
    Hunt

  • I am unable to capture using Matrox MXO2 LE with Preimere Pro CS6 and Windows 8

    I have a Matrox MXO2 LE and trying to capture with Preimere Pro CS6.  My OS is Windows 8 and it sees my Matrox Device via my device managers.  No option comes up in CS6 to allow me to actually capture.  I am a new beginner with both Matorx and Preimere so learning on the way. 
    Background Information:
    I have a Datavideo SE 600 Switcher (SD) and it is connected to the Matrox.  I am trying to capture into Preimere Pro so that we can make DVDs instanly after service, we are a church.  I am able to capture using Adobe Live Media Encoder for Live streaming but not Preimere Pro CS6.

    Check with Matrox... ask 2 things
    1-do you have a device driver that is "certified" for PProCS6?
    2-do you have a device driver that is "certified" for Windows 8?
    The only NATIVE support in Premiere (any version) is Firewire

  • Imac Graphics cards with Premiere Pro cs6

    Hello
    I just changed over to Premiere Pro cs6 from avid and fcp 7/x. I am already sure i made the right decision. I love the interface, i really love it! and cant wait to get stuck into it properly.
    I just bought a brand new, all singing all dancing 27 inch imac full spec 32gb RAM with a NIVIDA Geforce GTX 680MX 2048mb card. However pro cs6 by default is using the “Mecuary playback engine sofware only” instead of the “Mecuary playback engine Acceleration [CUDA] and i cant change it. Does it cs6 not support this card and if so will it in the future?
    Any help would be greatly apericated!
    Kind regards
    Philip

    Hi Paul
    You mention last week that you had  the same problem as me with your new iMac and graphics card with cs6.
    I was just onto  Adobe and they told me that they could not assist.
    Can you tell me who you death with?
    I am really keen to get this card running!
    R
    Philip

  • Need help with Premiere Pro CS6 playback problem

    Can somebody help me please? My premiere pro cs6 does not play plenty video in the time line for editing irrespective of using fast 64 bit, intel core i7, 16gb ram pc. Please what could I use to make it more stronger?
    Edited by: Kevin Monahan
    Reason: Changed title for better search ability.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • MXF issues with Premiere Pro CS6

    Hello,
    I am having trouble using Canon XF300 MXF files in Premiere Pro CS6 v6.0.2. I am using the media browser (tried icon and list view) to import footage (first importing to internal HD via the Canon XF Utility). I can import and play audio and video for all files under 2.05 GB but PPro limits any file longer than 30 seconds to  30 seconds.
    Alos, Canon cameras cut files over 2.05 GB into separate MXFs. Most of my footage are interviews over 10 minutes long so I have 3 or 4 separate MXF spanned files for each clip. Premiere is having most trouble handling these files. First of all it limits them to 30 seconds each. Then, when I import them and drag them into a sequence it will only play audio from the first spanned file, even if video from the second sapnned file is playing.
    I have tried merging all spanned files using Canon XF Utility's 'Export to MXF' function. As a result I have one 10 minute long MXF file but when I import it to PPro it still limits it to 30 seconds.
    I made the change to PPro because of the ability to edit various formats in a single senqunce without tanscoding. I recently purchased a Sony FS700 and FCP7 couldn't really handle the MTS (or clipwrapped movs). Premiere handles them perfectly but can't handle the MXFs. So currently I am finding myself going into FCP7, logging and transfering the MXFs and transcoding them to .movs using the Canon XF plugin for FCP7 and then importing those to Premiere (they work fine this way)...but of course its a hassle to do with hundreds of clips per shoot.
    I also noted that VLC 2.0.x versions can't handle the MXFs so well (video plays fine, audio at double the speed) but VLC version 1.0.3 handles them ok as long as I dont forward the video.
    Any help is greatly appreciated.
    Computer specs: Mac Pro 2.66GHz 12 core, 16 GB RAM running latest Snow Leopard update.
    Clips shot at: 29.97 fps, 50 Mpbs, HD 1920x1080.

    (first importing to internal HD via the Canon XF Utility)
    Try skipping any special software and just use Windows Explorer (or Finder).

  • Crashing issues with Premiere pro Cs6

    When I use Premiere Pro CS6 it tends to crash and it also tends tends to make the video pink and green looking, and it also sometimes flips it upside down and turns it black and white. So I was wondering if auto-saving had anything to do with it or if my camera or cpu had anything to do with it. I re-installed the program once, I also tried converting my video files to h264 before bringing them into Premiere. I use a Sony HXR MC1500p, and I am not using PAL by the way (or maybe I am and I am unaware), I really dont understand PAL and NTSC anyway.
    Camera Specs:
    http://www.bhphotovideo.com/c/product/759003-REG/Sony_HXR_MC1500E_HXR_MC1500E_Shoulder_Mou nt_PAL.html
    CPU Specs:
    http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3844129&CatId=1 14
    Please Help me!
    Thanks, Ryan

    1st. You don't have convert you videofiles they are AVCHD so OK for Premiere Pro.
    2nd. The edit PC (with Pro pro) is far better off with Intel CPU, Nvidia GPU,  lots of harddiscs, >800 watt gold PSU, big CPU cooler etc etc..
    3rd. Read a few hours at the hardware department. And you could build a nice machine for $1500,- to $3000,- yourself or order at ADK.
    http://forums.adobe.com/community/premiere/hardware_forumhttp://

  • Looking for computer compatible with Premiere Pro cs6

    Hello everyone,
    I am looking to invest in a new computer desktop that could support programs such as Adobe Premiere Pro cs6 and Photoshop cs6. I would like to go with a DELL computer if possible and I definitely need something that can support HD video editing. What would you recommend??
    My budget is max 1500$. I have been looking at the Dell XPS8500 however the graphics card (NVIDIA Geforce GT640) is not listed in the tech specs required for the Premiere Pro cs6 program and I'm not sure if it's strong enough to support the Adobe programs. If it's possible, I would also like to have a re-writable BR optival drive, but it's not a necessity.
    I will be doing a lot of video editing (I am a film student) and I will be using video footage from my Canon 60D.
    Please let me know your best suggestions and if I should build my on PC, what do I REALLY need to be able to edit videos with ease (no lagging, etc.).
    Thanks!
    - Jackie

    My budget is max 1500$. I have been looking at the Dell XPS8500 however the graphics card (NVIDIA Geforce GT640) is not listed in the tech specs required for the Premiere Pro cs6 program and I'm not sure if it's strong enough to support the Adobe programs. If it's possible, I would also like to have a re-writable BR optival drive, but it's not a necessity.
    On a low budget, a DIY or a custom system. For under $2K, you could put together a nice DIY system as John did.
    Decent Dell and HP workstations start at $3K, and on the low end, I'd recommend HP Z420 over Dell T3600.  Decent custom systems (basically DIY but put together and supported by professional integrators) also start around $3K but offer more performance for the money vs. Dells and HPs.
    Like Harm, I don't think XPS8500 is a good match for CS6.
    HTH.

  • Capturing with premiere pro cs6

    Hallo,
    I use permiere pro cs6.
    My problem is capturing from DV,
    Because my camera JVC GY-HD101 work with miniDV en I use for capturing Panasinic NV-GS500
    Wich capturing programs work without problem with premiere pro?
    Thanks

    1st, some general help
    http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
    -and Windows http://forums.adobe.com/message/4708997
    2nd, alternative programs
    I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
    I have NOT used it, but many say to try this for HDV capture
    -archived at http://www.videohelp.com/tools/HDVSplit
    -Click the 1st link under "Download sites:" for the latest version

  • Which video camera works best with Premiere Pro CS6

    I'm a beginner in working with PP and need to purchase a video camera which will work seemlessly with Premiere Pro.  I don't want to go through a lot of conversion steps. I want to tape my kids sports, be able to take the raw video right from the camera to PP and begin editing, copying etc. Does the Canon HFM 500 with ABCHD formats provide what I need or do I need something more sophisticated?  Just getting started with the whole video editing thing and want to make the right choices before buying a camera. Thanks for any input.

    This message has a really good graphic about requirements
    - http://forums.adobe.com/thread/810750
    More about Requirements http://forums.adobe.com/thread/618058
    Disk Configurations http://forums.adobe.com/thread/878419
    What I built for CS5 and the camera I use are in http://forums.adobe.com/thread/652694

  • Does xavc long from a pxw x70 camera work with premiere pro cs6

    Does xavc long from a pxw x70 camera work with premiere pro cs6

    Take a look at this plug-in

  • I just purchased a 28" 4K monitor to use with Premiere Pro CS6 in WIndows 8.1 and the fonts are super tiny.

    No matter what settings I choose, the fonts on the display are impossibly tiny.  The menu fonts at top are readable, but everything else feels like I am taking an eye exam. 
    Is this fixable, or do I need to return the 4K monitor and fuhgedaboutit? 
    Since I am doing some shooting in 4K, I thought this monitor would make sense. 
    If in fact it can't work with PP CS6 on WIn 8.1, what is the best recommended monitor to use with PP CS6?

    Hi Hbrandado,
    hbrandado wrote:
    No matter what settings I choose, the fonts on the display are impossibly tiny.  The menu fonts at top are readable, but everything else feels like I am taking an eye exam. 
    Is this fixable, or do I need to return the 4K monitor and fuhgedaboutit? 
    Since I am doing some shooting in 4K, I thought this monitor would make sense.
    I understand your issue and I don't have a solution for you. Sorry. In Premiere Pro CC 2014, you can increase the size of the fonts in the Project panel, but not in CS6.
    hbrandado wrote:
    If in fact it can't work with PP CS6 on WIn 8.1, what is the best recommended monitor to use with PP CS6?
    You may want to ask this in ourHardware Forum.
    Lots of gear heads that can help you there.
    Thanks,
    Kevin

  • How to transfer and use the project files from Premiere Pro cs6 MAC OS to Premiere Pro CS6 Windows

    Is there any plugin or tool that can help me to transfer my project files along data edited on adobe premiere cs6 MAC OS to the adobe premiere pro cs 6 on windows PC

    When transferring a project from one computer to another,to stop errors such as these, its essential to ensure that the project is copied with all the files and folders in exactly the same locations. Also before opening the project on the new computer, you need to set up a new project and set all the preferences to be exactly the same as on the first computer. Then when you open the project, premiere will find all the files in all the right places. Even then you may need to re-link some files. Just follow the prompts when Premiere asks "Where is file...."
    We use USB hard drives to store students projects on and they are used on many different computers without problems, as the preferences are all set to be the same.

  • Using an external microphone with Premiere pro

    Hey Guys, I'm new to this forum and I really don't know if you guys could help me with this. But I have bought a Samson C01U microphone a few days ago and I really want to use Adobe Premiere pro to record some guitar covers of myself. The problem is however; I record my video's with my sony handycam and I want to use my new mic to record the sound but when I press F5 (to capture a movie in Premiere pro) it still uses the microphone from my camera. What should I do?
    I have already tried this: http://premierepro.wikia.com/wiki/Microphone
    Thanks everyone
    Stijn Jasper
    ~The Netherlands

    This is how I do it at the moment: I start premiere pro and Audience. Then I turn off my speakers to make sure it doesn't get feedback from it. Then I hit record on both programs and sync up the video and audio lines after my movie is done (then I also disable the audio that my Handycam has recorded)
    But that's a lot of work if you want to shoot many video's. There must be a better way right?
    This is how I got my microphone enabled in Pr: http://kb2.adobe.com/cps/408/kb408222.html
    It works, but only if I want to record AFTER I have recorded the movie (like a voice-over)
    Any more ideas? (thanks for all the great reply's btw) you guys are really helpful

  • Using a GTX 670 with Premiere Pro CC

    This is a similar question to one that's been asked many times before, pertaining to earlier versions of Premiere.
    With CS6, some cards not on the supported list could be added via a "hack". Can a similar modification be made for Premiere Pro CC ? And if so, how and where ?
    Something related to Premiere- I also wonder if Speedgrade can support my GTX 670.

    After some searching around, I found this page from Adobe  > http://blogs.adobe.com/premierepro/2013/06/adobe-premiere-pro-cc-and-gpu-support.html
    According to that page, selecting non certified cards now only requires a simple change in the project settings.

Maybe you are looking for

  • How to Get Contribute CS4 to Update Available Styles when CSS is Updated

    I am using a style sheet on my website.  I recently updated the style sheet, adding a new style, in Dreamweaver.  When I go into Contribute, the style is not showing up.  How can I force Contribute to get the updated data from the latest version of t

  • ORA-12514 with Easy Connect only

    Greetings, On linux with a recent local install of Oracle XE: $ echo ORACLE_SID XE $ sqlplus system...works fine with nothing output to listener.log. I can connect no problem. However if I try: $ sqlplus system@localhost:1521/XEI get the following in

  • Installing 2 blank copy of iphoto to external harddrive

    My iphoto library is full and taking up all my space. can i install a 2nd BLANK copy of iphoto on my external harddrive and start using that for new photos as opposed to deleting some to get more room. Is this possible and how would I do it? thanks

  • CS-MARS 5.3.x and Top Destination Port "0"?

    Hi - We have a CS-MARS just installed and in the Dashboard under "Activity - All Events and NewFlow - Top Destination Ports", it lists the top port as "0". What is this and why is it doing it? It is almost double what TCP/80 is. When I run a report,

  • Linux on 32 and 64 Bits platform ?

    Hi, I have read the "Installation Guide for Linux" for XE. The supported, for instant, operating system are clearly defined but not the type of processors. My question : Does XE work on Linux with a 64 Bits processor ? Thanks for your response Henri