Using Gimpshop - the application gimp-2.2 quit unexpectedly

Hi there,
When I try to open the gimp.app program, first a window pops up that says "caching fonts" and another window with a header 'xterm' comes up and in the xterm window it says "bash-3.2$".
After a minute or so, the "the application gimp-2.2 quit unexpectedly" message appears.
X11 seems to be running when all this happens although I don't know what X11 is or does.
Hope someone can help

I had the exact same problem with gimpshop and os 10.5.7
I just downloaded the latest version today for the first time. any suggestions?

Similar Messages

  • HELP - the application Adobe Illustrator CS2 quit unexpectly

    Hi, I have a room of networked Mac's (G4) OS 10.4.6 and we have had all twenty machines running CS2 and everything working fine.
    Now that the machines haven't been used for a while I can only get 7 of the machines to work on CS2.
    I get this error message when opening a new or saved document in illustrator " the application Adobe Illustrator CS2 quit unexpectly".
    Version of Illustrator is 12.0.1 Any Ideas?

    I've this problem too.
    The solution described on http://kb.adobe.com/selfservice/viewContent.do?externalId=330444
    is malfunctioning

  • The Application Adobe Illustrator CS2 quit unexpectedly

    Hi, I have a room of networked Mac's (G4) OS 10.4.6 and we have had all twenty machines running CS2 and everything working fine.
    Now that the machines haven't been used for a while I can only get 7 of the machines to work on CS2.
    I get this error message when opening a new or saved document in illustrator " the application Adobe Illustrator CS2 quit unexpectly".
    Version of Illustrator is 12.0.1 Any Ideas?

    Well we are at 10.4.11 right now and 10.4.6 if I recall correctly was a nasty version. I'm running CS2 on 10.4.11 with no constant crashing. You always have the one off goofy crash every once in a while.

  • The application Printer Setup Utility quit unexpectedly

    Hi All,
    I'm using 10.4.11, trying to add a printer. In 'Default Browser', I click on 'More Printers', and I receive the following error, The application Printer Setup Utility quit unexpectedly.
    Done all the basics, reset permissions, updated latest software, no help.
    Any help is appreciated.
    Thanks.

    To The Apple Discussion Boards!
    Did you reboot your computer after repairing permissions & installing? If so, trash the com.apple.print.PrintCenter.plist file & restart your computer.
    Please post back the results.

  • The application HPIO trap monitor quit unexpectedly?/??

    I just updated to Leopard and I repeatedly get the error message box that says "The application HPIO trap monitor quit unexpectedly" Then it gives me three choices..ignore which keeps it offf for a few minutes and then it pops back up, report, same thing and relaunch..it immediately comes back. Does anyone know what the HPIO trap monitor is and what I can do to stop this super annoying box from popping up ? btw Happy New Year

    It's the startup item associated with an HP printer—HP input/output trap monitor. Your best bet is to reinstall the latest HP software available for your printer. I'm running an HP PSC 1510 AIO and the trap monitor daemon isn't crashing. Downloads at http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&cc=us&dlc=en&product=4 28800&os=219&lang=en&

  • The application Final Cut Pro quit unexpectedly

    This message pops up immediately when attempting to launch FCP (version 5.0.1)
    I have trashed preferences, ran disk utility. No dice!
    Any ideas.
    The only thing I had done recently (since last running FCP) was downloaded QT Pro. I know it shouldn't have needed to download QT Pro, but I did, since I needed the application. With that stated, any help from you gurus out there would be greatly appreciated.
    BTW, how do I also update to FCP 5.0.4?
    Thanx again!!

    QT Pro was installed as part of the FCP5 package.
    Update to 5.0.4 and remember to repair permissions BEFORE and AFTER you run the updater.
    If that doesn't help, try running FCP Rescue (google it, it's free)
    Use it to TRASH your preferences.
    good luck.
    x

  • "The application Sync Server has quit unexpectedly"

    For the last week or so, the above message appears on my screen about once an hour. I can choose Ignore, Report to Apple, or Relaunch. I usually choose Ignore, although sometimes I hit Report.
    The thing is, my MacBook Pro has been extremely sluggish for several months now--almost to the point of being useless. I've been trolling the support boards, trying various suggestions, but nothing has helped for a significant amount of time.
    Until now. When I Ignore or Report the Sync Server failure, my machine perks right up and the speed is just as fast as when it was new. This situation lasts for about 45-50 minutes, then Sync Server apparently tries to sync, my machine slows down, then Sync Server fails, and the box comes up... and the cycle begins again. Then another 45-50 minutes of terrific speed.
    Since I do not at the moment have much need for syncing (I have one computer and no gadgets or gizmos that need syncing) , I would be happy to kill Sync Server (assuming that is possible). However, I plan to get an iPhone later this year, and then I will need to sync that.
    So--any ideas how I could get Sync Server to not quit but yet not slow down my computer?

    I'm having the same problem on my machine. SyncServer has completely taken over my computer; when I watch it in Activity Monitor I can see it taking up >95% of my CPU processing ALL the time. I can force quit for a few short moments, but it just starts back up again. I tried the solution as listed in the link above (Open Terminal and type in that one-liner) but no success. Any other thoughts on getting SyncServer to stop having a mind of its own?

  • The application HP device monitor quit unexpectedly window keeps popping up

    Help
    I installed driver from HP for my version 10.5.8 and I now get the above message popping up every 5 seconds and I cannot get the printer to work. How can I remove this message and get printer to work wirelessly? I have removed all the files (HP) I can find and restarted comupter but message keeps coming up.
    I am very frustrated.

    This can depend on whether your iMac running Leopard 10.5.8 is an older PPC (G4 or G5) iMac or a post-2006 Intel based iMac.
    They would need different printer drivers - check with HP that you have the right one.

  • The application Final Cut Express quit unexpectedly.

    Dear Group
    I have been receiving this error when trying to run FCE today. I have spent all day trying to run the app but to no avail.
    I have completed an install after completing a complete uninstall as per the instructions on this page:
    http://support.apple.com/kb/TA38198?viewlocale=en_US
    I have also downloaded the Preference Manager 2.1.4 to remove all my preferences and also deleted them manually.
    The splash screen always gets to "loading video effects' and then issues the error with associated report. The report makes no sense to me.
    I'm not sure what else to try now and it's driving me crazy.
    Please help if you can.
    Thanks
    Craig.

    Thanks Tom.
    Yes it's been working fine for a year on my iMac with the update 4.0.1. The only thing I can think of is that I installed the Boinx Fotomagico upgrade for Toast users this morning. I have since uninstalled this and still have the same problem with FCE.

  • The Application apple works 6 quit unexpectedly.

    I try to open my applictation from the hard drive. No luck. I get this
    I can either click reopen (which won't let me do that it just gives me the same window) Close or Report.
    So I reupload software into hard drive after deleting the original one. No dice. I try opening it from the CD and no dice.
    What's writer to do????

    The problems you are having are most likely due to corrupt preferences. Each time AppleWorks crashes there is more corruption. I know I give this response very frequently (so do others), but it's because it is the most common cause of problems with AppleWorks. Deleting & reinstalling (not "upload") does not affect the preference files. These files are created by AppleWorks for each user & must be deleted manually. The next time you launch AppleWorks new, clean preference files will be created. See my user tip, AppleWorks has stopped working correctly, for more information.

  • TS3147 After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"

    After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"  This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.

    rjliii wrote:
    Solved problem with original Canon software.  When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
    You should still use Image Capture IMHO.  If it was my gear, that's what I would do.  No need to worry about software upgrades.

  • Logout has timed out because the application Mail failed to quit.

    Hello world... (Mac world that is)
    The message says more "Logout has timed out because the application Mail failed to quit. To try again, quit Mail and choose Log Out from the Apple menu."
    I tried everything. Still does not let me shut down.
    Other programs will not shut down at this time, including Finder. I also know that the Time Machine icon has been spinning for over an hour. So I imagine we are in a loop of sorts.
    Unfortunately, I have had similar troubles before that I did not record. So I figure I start now and see if somebody out there can help me.
    Peace!
    Chopo

    I'm having the same problem (can't logout, shut down or restart), but the referenced solution doesn't seem to apply. I do not get a "Cannot connect to server" message, I just get a "Logout has timed out" message. It seemed to happen after an automatic software update that was supposed to involve a restart, but it hasn't been able to restart since.
    Can you please clarify, what is meant by "delete the AutoLaunchedApplicationDictionary, which is located under the root node" (with reference to file loginwindow.plist)?
    This is what the loginwindow.plist file looks like now:
    bplist00Ñ!AutoLaunchedApplicationDictionary¢ÒTPathTHide-/Library/Printers/hp/hpio/HPEventHandler.app/Ò _N/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app//27
    I was at the genius bar earlier, and they said I need to 'archive and install' in order to 'reset the OS'... but there's got to be a better answer than that, no? Perhaps this plist thing? I'm surprised that even powering off the imac doesn't reset anything... it just comes back the way it was. I'm supposed to bring the 25 inch imac in to the mac store for surgery (archive and install), but seeing several similar cases on this discussion forum, without archive and install identified as the clear solution, I'm in search of a second opinion... or any suggestion for how to simply make this work the way it was before? Is it 10.5.4 that is causing this? Should I go back to 10.5.3?
    Any suggestions are appreciated. Thank you.

  • When i try to open my flash player in system preferences i get the message that system preferences quit unexpectedly while using the flash player plugin.

    when i try to open my flashplayer in system preferences i get the message that system preferences quit unexpectedly while using the flashplayer plugin. thanks for any help

    The problem has been fixed with the most recent OS X software update.

  • HT2476 I have just downloaded Mountain Lion for my MacBook Pro and now when my applications open they close and the error "This has just quit unexpectedly" message pops up. Does anybody know what is happening?

    I have just downloaded Mountain Lion for my MacBook Pro and now when my applications open they close and the error "This has just quit unexpectedly" message pops up. Does anybody know what is happening/how to fix it?

    Welcome to Apple Communities
    Press Command and R keys in boot and reinstall

  • App sub-window has locked the use of the Applications.

    I cannot access my Applications on my iPad because an app window is open and has locked the use of the Applications. How can I unlock this?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • Image Processor Pro and Picture Processor load eps files without rasterizing them

    Hi. My name is Lucas. Im from Argentina, now living in Brazil. I have the problem that is in the title. Im new doing this stuff but reading a lot i discovered that both scripts open eps files and because they dont get reasterized, then saved files lo

  • Re: Increasing Column Header Length While Printing in ALV Grid

    Hi For some column headers in a report, the translations in Turkey are more than 40 characters, because of which while executing the report in TR language, the column header is getting truncated. So, I would like to know if we can increase the column

  • Final Invoice

    Hi guys, my problem is this: when I run the transaction MIRO and I insert the PO I don't want to see all that items which have already been register as a invoice but by FB60:that is these items are already registered in area FI but when I execute the

  • Ship to party name  in Sales Order

    Hello all. I created a sales order. I saw the technical information of a Ship-party in a sales order. It is a structure KUAGV. Field is TXTPA. I want to know  the real database table this information came from. Your help will be appreciated. Shirish

  • Backup approach prior to system go-live

    hi, my project team will be performing conversion and uploading to production client prior to go-live. in case half way hit by error, and to avoid from redoing the whole conversion again, we will perform client copy at stages. other than client copy