Using gmail as a backup for Z30 contacts

If I open a Google account and get a gmail address, will it backup (sych) my Contacts (1,800) that are already on my Z30, or will I have to re-enter them after setting up a gmail address....thanks!

Here's what I'd do if it were me. Create a new Outlook.com account then proceed with the following:
Create a new Outlook profile on your PC. Might as well set up a profile that goes to the new Outlook.com address while you're at it, but you don't have to.
Plug in the device.
Open Link
Click on the gear icon at the upper right.
Then at the bottom you should see two "tabs." One will be your computer name and the other should say "BlackBerry-XXXX" Click on the BlackBerry-XXXX tab.
Make a full backup of the device. You never know, anything can happen with tech and you want to be able to restore if you have to.
Under Synchronization click on Configure. Choose the profile you created for the Outlook.com address. Again, the profile doesn't have to be connected to the Outlook.com account if you don't want it to. It can be just a blank account.
Check the box for Contacts and uncheck for calendar (nless you want that data too).. Configure the sync for "1-Way Sync to Your Computer."
Once the data is in Outlook then export the contact to a file that you can import into Outlook.com.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • Can I use gmail as default client for sharing photos from camera roll or links from safari?

    I use the Gmail app for my Gmail stuff (my normal default email address).  I use yahoo with apples mail app.  When I try to send a link from safari or share a photo I have taken from my camera roll, it sends using my yahoo email.  I would prefer Gmail as my yahoo email is only around for fantasy sports.
    Is there any way to do this?
    I have tried setting up Gmail using apples setup in an attempt to make a gmail send only type of account, however it tells me an account is already set up, maybe due to my using of googles calendar and googles contacts?  Can't seem to figure out how to properly do this.  Maybe remove my calender and contacts stuff completely and try to re-setup the mail account (since I am using the gmail app, I wouldn't think it would hook into the native ios mail one)?
    Any ideas?

    Rock- I have google contacts set up as a CardDav account.  Apparently I must have had google calendar set up using the standard ios gmail account setup for mail, while just turning the mail function to "off" in the settings. This was why I could not add a gmail account...I already had done this lol.
    I tried a couple of things and still couldn't figure it out.  I can't add an ics subscribed calendar for some reason as it isn't enable to authenticate.  Nor can I set up a simple CalDav calendar, despite my settings being correct, it wasn't able to successfully authenticate either.  Or maybe it was "verify" and not "authenicate"...at any rate I coudln't do it.
    Maybe I am explaining what I want to do incorrectly.  I'll try again, though it is probably as clear as mud lol.
    I want my google contacts and my calendar.  If iOS handles this for me I am totally ok with that.  I want my Gmail app, which handles the bulk, or essentially all of my mail for me, labels etc, and I use it all the time...which of course I am ok with as well.
    I want the native iOS mail app to handle my yahoo account, which sees little to no email transaction from me. It does this well right now, as its pretty much only a seasonal account....meaning when it is fantasy football season, it comes into play.
    I want the native iOS mail app to handle any photos or links I send from the phone to give my gmail account address in the "From" part of the header....even if it sends it from yahoo's servers.  Preferably I would like it to come from gmails servers but I know I can't have my cake and eat it too. 
    The reason for all this is if I send someone a photo I want them to respond to my gmail not my yahoo account.  I tried setting up the gmail account using the native iOS gmail account setup, but what happens is that I end up with my incoming gmail in two spots on the phone, which I don't want. 
    If I could turn off incoming gmail using the native iOS account setup, this would solve the issues.  I would then be able to designate the native Gmail account as primary (for use as a send only account), and still keep the yahoo inbox going as well.
    Even if I went to extremes and paid money so I could forward my yahoo mail to my gmail account, thereby allowing my to remove yahoo completely from the phone, I would just be left with no option to send emails as there would be no default account available (as my gmail is handled by the app, not the phone).

  • Using old file system backup for Cloning

    I have taken an off-line backup of Oracle 11i (11.5.10.2) 15 days ago. Before taking backup of file system , I verified that all the latest Rapid Clone Patches are applied. No changes or patch work in APPL_TOP or DB has been done since that backup. Now I need to do cloning of this instance, how I can use this backup for Cloning.
    Rapid Clone scripts create and generate some files/directories so I am not sure whether my Old backup of file system will work or not. What is the best way to use old backup for cloning , also what are the file and directories in addition to the old backup of file system which I need to copy to Target System.
    Thanks for reviewing and suggestions.
    Samar

    Samar,
    If you have run preclone before backing it up, your backup should be valid for cloning.
    2.1 in the cloning doc has to be in the backup.
    These doc's should clear out yours doubts on cloning.
    Cloning Oracle Applications Release 11i with Rapid Clone
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
    FAQ: Cloning Oracle Applications Release 11i
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1

  • Using DVD-R as backup for data

    I thought I could use a blank DVD-R disc as backup for data/files, as I've done with blank CD's in the past. However, loading a blank DVD just starts iDVD and I can't figure out how to transfer files, plus there is no disk icon on my desktop. I'm sure this is a real beginner question, but I just got my iMac. Thanks, David

    Hi David
    First thing you need to do is change your preferences so that the DVD mounts on the desktop. Open System Preferences by click the Apple menu in the top left corner of your screen and selecting "System Preferences..."
    The select the CDs & DVDs pane in System Preferences. You can change the "When you insert a blank DVD" option to "Ask what to do". You can now close System Preferences
    The computer will then ask what you would like to do when you insert the blank DVD, selecting "Open Finder" will mount the DVD on the desktop.
    Hope this helps
    J.C

  • Using smart phone as backup for uverse being down

    My AT&T Uverse home dsl service was being upgraded yesterday and and something went wrong. Now my service is completely down and we'll be for the next few days. Would AT&T wireless let me use my AT&T cell as a backup without charging ne for the extra data I usa? The tech from uverse thought they would credit me. I have a ticket number to show my service is down.

    I wouldn't depend on it unless you get it in writing from AT&T wireless. This is a user helping user forum. For an answer to your question, you need to private message  with your account and contact information. If they approve the credit, you should be OK. I wouldn't depend on the word of a tech.

  • Why? I can't use my Visa card? For assistance, contact iTunes Support at~~~

    Hi
      I just want to ask why? my Visa Card can't use ??? FB to my Emil please.......                                                                                                             
    <Edited by Host>

    You should do as they ask; contact iTunes support.   Some visa cards are not acceptable if they are debit cards, for instance.   But iTunes support will tell you exactly why.
    Incidentally, I have asked the hosts to remove your email address; it's not good policy to publish it, it could encourage spam at best and scams at worst.

  • HT201250 can a time capsule be used as just a backup for data without being connected to a home network?

    This is the explanation for my my question about whether a time capsule can be used as a backup without being connected to a network.  I had to disconnect my time capsule when I upgraded my landline to a wireless home phone in order to go to a wireless security system that would work with my 2WIRE router. The time capsule blocked the usage of my camera on my security system, not allowing the camera to connect to the 2WIRE router. Once I disconnected the time capsule,  the camera was able to connect wirelessly to the 2WIRE.

    Welcome to Apple Support Communities
    See > https://discussions.apple.com/message/16717724#16717724
    As you can read, you can do what you want. You just have to set up the Time Capsule network in AirPort Utility without connecting it to the router and ignoring the messages, and connect to the Time Capsule network. You will have to switch between the Time Capsule and the other router's networks

  • ?? re using IPOD Classic as backup for photos while away on vacation

    I bought an 80GB IPOD Classic primarily as a backup storage device for photos while away for 3 months. I have copied about 4 g of songs onto it (using my main computer and ITUNES) and now plan to use it to back up photos using my Laptop (which doesn't have ITUNES on it).
    I realize that I don't want to use the ITUNES Photo Sync as I will be using it on two computers and it will erase and sync the new photo files so I plan to copy and paste the files in using Windows Explorer. I've done a couple of tests and all seems fine - using Explorer I copy Pictures Folders into the IPOD and I can see the files, open them, delete them, etc - and they're the correct size.
    My question is this - I can't seem to "see" the photo files on the IPOD itself - when used as a storage device can you not see the photos? Is there another menu I can't find?
    Also - I checked off the "Enable Disk Use" and "Full Resolution" in ITUNES - maybe that's not necessary as I'm not using ITUNES for the photos?
    Thanks for any help

    *I can't seem to "see" the photo files on the IPOD itself - when used as a storage device can you not see the photos? Is there another menu I can't find?*
    You can't "view" anything on your screen that is added to the iPod when using it as a storage device, in the same way that you can't play songs added in that mode either. You can only access those files through Windows Explorer (or Finder on a Mac), you can only view or play anything added through iTunes.

  • I just enable icloud backup for my contacts and now my contacts are gone. I sthis just another new operating software problem.

    I udated to the new operating system about one week ago. Not too many problems at first.
    Yesterday, for no reason, I lost all of my bookmarks in Safari. Now it won't even let me do book marks at all.
    With this in mind, I thought I should probably enable Icloud to backup my Contacts.  Big mistake ......Now every thing that was in my contacts is gone.
    I can't tell you how upset I am.  I hope there is a fix for this and soon.

    You can always resync the Contacts, Notes, and Messages by signing into those services with the same AppleID once you have the new phone set up.

  • Is there any way to use iphone as a backup for images while travelling

    Iphone would make a great back up store for digital images taken with a real camera while travelling, if there was a way to transfer full resolution image files from a PC to iphone via USB. When I am travelling light, I dont carry a laptop with itunes and the iphone doesn't appear as a drive when connected to a computer. Not sure why the file system is hidden.
    Any ideas for this?

    The iphone does not support disk mode, which would allow it to be used for storage.
    At present, I know of no way to do what you want.

  • Using Gmail Account on Messenger for Mac

    I just recently switched over to a gmail account (had a hotmail account before) and have had no problems except being able to log onto messenger.
    I've been searching around, trying to find how I can get my gmail account to work on messenger, but am yet to be successful.
    Does anyone have any idea how to make this work, hopefully I'm just missing an easy step.

    No ideas?

  • Blackberry curve 8520 using gmail - can only recieve NOT send emails!! please help!!

    Hello.
    I have been using gmail on my blackberry for a month without problems,  it just comes straight to the inbox on the main screen of the phone.
    Today my Blackberry stopped sending emails but still recieves them. When I try to delete anything in the inbox, it merely gives them a "yellow" star but does not remove them.
    How can I resolve this?! I am really desperate!!
    I have tried deleting gmail account and starting again, but this does not work. Nor does asking for servicebooks.
    Any idea?
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!!
    I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS conduits for the affected email accounts.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I'm using firefox 4 en Gmail. When I choose my contacts there is no button for new contacts. In IE9 it is there. I've done everything what is on the net to solve this problem. But nothing works.

    I can't work in Gmail since I use firefox 4. The button "New Contacts" doesn't appear. I've tried everything to solve this problem: thrown away history, cookies and ad-ons. In firefox save modus it works. In IE9 it works. Only not in firefox4.
    In the former editions of firefox there were no problems.

    Extend wireless is simply no longer required as an option. Apple have assumed it will be extended and it is on by default.
    With your main base setup.. I gather you are using the A1408??
    Simply factory reset the TC..
    Then when you do the setup.. extend wireless is the option that will automatically be offered to you.
    I am just going to do it.. Other way around.. but it is the same thing.
    So here we go..
    I have factory reset the airport extreme.. and it takes a couple of min for it to come up.
    You can also see it in wifi.
    You can click on it in either place and get into the auto setup function.
    I have no network connection at all on the extreme.. it is simply powered on and close to the computer.
    It will automatically offer a name.. for reasons I won't go into here but see C9 http://pondini.org/TM/Troubleshooting.html
    Give the Extending router a name that is short, no spaces and pure alphanumeric.. you can do it immediately here.
    Go next..
    Magically it is done..
    Now fix up the errors..
    Default password.. in my home this is not an issue.. and I don't want to change it ..
    So I ignore it.
    Second error is firmware is old.
    But I much prefer 7.6.1 So I have no intention of giving that up..

  • Using Microsoft Exchange to access Gmail (Google Apps for Business) contacts, what is the best way to sync the Corporate Directory?

    Using Microsoft Exchange to access Gmail (Google Apps for Business) contacts, what is the best way to sync the Corporate Directory? For instance, we have 40 staff members and wish to populate each phone with the Gmail profile. Right now we have a third party Android app that does this and copies my contacts to each phone. This is problematic. Any solutions to populate a phone with email and phone contacts? Even it it requires double entry for me...thats ok.

    Oh, I meant Leopard does do more than Tiger Server.
    I don't know enough about Server, even less abut Syncing.
    SL is to new, not enough time to iron out the kinks yet imho.
    One day SL will be better than Leo, but...
    I'd ask over in server...
    http://discussions.apple.com/category.jspa?categoryID=96
    Or perhaps Collaboration Services...
    http://discussions.apple.com/forum.jspa?forumID=1352
    They may even have a different opinion on SL.

Maybe you are looking for

  • Image will not display in a jFrame

    So, I had this working, but then I resized the jFrame and the image, and now it doesn't work. I even tried setting it back to the original size and it still doesn't work. I changed nothing else in the code. I'm using Netbeans IDE and this is a java d

  • ATOM Feed parsing in Flex

    I need to parse an Atom Feed and display it into a Flex UI. As part of UI I am providing navigation links such as: Next Page, Previous Page, First Page and Last Page. The Feed looks like this: <feed xmlns="http://www.w3.org/2005/Atom">   <title>Alert

  • Slower Speeds on Bigger FIles/Formats???

    For the most part, my internet speed is fine, but I have noticed on multiple sites that if the file size I'm downloading is bigger than 15MB, the download takes exponentially longer.  What's going on here?  A 5MB download takes 30 seconds say, but th

  • Nested SQL Query in CR10 not working

    Hi I have a SQL query See below but crashing CR SELECT     ax_Staff.ax_Name, ax_Staff.ax_Reference_Number, ax_Licence.Rn_Descriptor, ax_Licence.ax_Expiry_Date, ax_Department.ax_Name AS Department FROM         ax_Staff INNER JOIN                      

  • Northwind sample and SQL Compact 3.5 (PROBLEMS)

    using vb express I'm totaly new to the VB and SQL Using the Learn VB and getting to the part about "Displaying Related Data" When I try to add a connection Using SQL Server Compact 3.5 as a Data Source Using (C:\Program Files\Microsoft SQL Server Com