Using Griffin iTrip in Denver area?
My daughter is thinking of purchasing an iTrip for her iPod mini, to use in her car. Anyone have exp using one in the Denver area with any luck?
I had one back in the Green Bay area years ago, and it didn't work very well as Green Bay is situated right where many radio markets overlap at the edge of their signals, so there was never a good empty freq to use. Not sure about the Denver area...
Thanks!
I don't use the iTrip but use the Monster iCarPlay FM transmitter and there are a few stations that I use just fine like 90.1, 91.7, etc.
Oh yeah, I live in Denver too
Similar Messages
-
Newbie question - griffin itrip with dock connector
apologies if I've used the wrong forum (it seemed the most appropriate that would let me post a topic)
I've just bought a griffin itrip with dock connector for my 20G Iphoto. When I plug it in there is no LED display on the itrip. Can anyone help?
Thanks in advanceNathan,
Then the review(s) that are currently on the Apple Store website are bogus, which is exactly what I was afraid of. Don't people realize that putting fake reviews of products on the internet does nothing to help people, and in fact, does only harm?
Also have another question. What does everyone use for listening to their iPods in the car? I have an Aiwa receiver that has an auxillary input, but when I use it (in this car, at least), the sound is awful because it is not using the factory-installed powered amp. In my other car, which did not have the amp, the iPod sounded great, but it sounds like crap in the van because it doesn't use the amp. I don't know why and Aiwa was no help, either.
Any ideas or suggestions? -
Hi.
Does anyone know if iPhone can be used with the Griffin iTrip for incar?
I'm sure it should be fine but thought I'd check if anyone had tried...
Many thanks,
Chris.I have the iTrip Universal one. The one that plugs into the headjack and not the 30pin port.
The phone gives off a lot of interference to devices that are made for the iPhone specifically.
However the Universal one (headjack one) while does get some interference, it works great and I listen to a lot of podcasts (and my music) on the way to work.
I can go for hours without interference depending where I am. I think I finally narrowed it down that I only get interference for certain things.
1. When call or txt comes in (but not when it checks mail on interval...odd)
2. When moving it and jumps from one tower to another. Along interstate doesn't happen much as I live where a tower has a long line of sight. In tall building areas, happens now and then. Never to the point it is unusable.
If I really want to stop interference I can always switch to Airplane Mode, but I never felt I had to (except when on family trip and the only person I care about calling is my wife and she is with me).
I tried the 30pin one and got more interference. I would recommend the Universal one (headjack one) since I haven't seen any from anybody that carry the "Made for iPhone" seal. -
CLA looking for a job in Denver area
Hello,
I am looking to move out to the Denver area in the next month or two, so I'm trying to find some work. I'm hoping to find a full-time position but I'm open to doing contract work. I've been using LabVIEW for 6-7 years and I've been a CLA for 4 years of that. I've worked on a whole variety of projects mostly in the Test and Measurement, and Instrumentation and Controls areas. I've got an MS in Electrical Engineering with an emphasis in controls. Not only do I do software but I also do some hardware work.
If you'd like more information just ask.
Sam--sorry mods, pls delete.
-
Why won't my new iPod nano work with griffin itrip?
I just receiveed a new ipod nano as part of the replacement programme, but it will not work with my griffin itrip or my old speakers even though the connection is the same - anyone know why?
thanksI used an iTrip with my old Classic 160, but when I got my 6th gen nano, it wouldn't work either. My iTrip was old, and the connector had lost it's plastic bits, so I thought that might be the reason. I could still use my Logitech speaker dock, so I don't think they changed the connector.
-
I too have not seen any LTE in over a week when I used to not have a problem at all. I'm all over the Denver area and haven't seen LTE pop up once in this time period
Discussion of moderation removed as required by the Terms of Service.
Message was edited by: Admin ModeratorI've been with Verizon over a decade and lived in the Midwest up until 2 1/2 years ago. Since living in Denver I've rarely seen 4g. Mostly 3g and 1x on my phone. Really frustrating cause out cuts out very often and pretty much gene to be some where with Wi-Fi if I wanna use my internet. I've always liked Verizon but friends I know with other services always have good connections around here. My contrast has been up and I'm wanting to get the new galaxy note 4 but am debating on switching services. Just doesn't seem justifiable to be paying over a $100 dollars a month for bad service. Any chance of service getting better in CO?
-
I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
BillThe Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch. -
TS1741 Can u use home sharing whilst u are away from home
Can u use home sharing whilst u are away from home
Oh, so is THAT where the name "HOME SHARING" comes from?
-
Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?
check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer
-
I’m trying to use the Rank function in a report and I’m having issues getting it to work. I’m using the Shared Activities subject area and would like to rank activities by Contact. Since there are multiple activity association to the users (attendees), I’m not getting the correct ranking order. Here is what I tried so far…
RANK(Activity."Task Due Date" By Contact."Contact ID")
RANK(Activity."Task Due Date" By Contact."Contact ID", Activity."Activity ID")
RANK(Activity."Task Due Date" By Contact."Contact ID", Employee."Employee ID")
I don’t mind getting the same values for the same dates but the increment should be in sequence. What I’m getting is 1,1,3,3,5,6,6… I want to show only 5 recent activities and so need the sequence of 1,1,2,2,3,3,4,4… If not date, what else is there to make it unique? I tried to rank it by Contact Id, Activity Id, Emp Id, etc. Nothing works!
I have tried other functions like RCOUNT, TopN, BottomN, ect. with no luck.Hi Max
Our requirement is to see all the activities for a server in a month ONLY IF there are activities on DIFFERENT dates. So using my example, server2 has activties on 7/1 and 7/14. Then we want to see all the activities for server2 in that month. Server3 has two activities but both activities are on the same date. So we don't want to see server3.
Counting by server will not work because that will include server3 in my example.
What I really want is to be able to count unique occurrences of dates per server in a month. And if this count is > 1, then this server will be in the report.
I used a pivot table to count the unique occurrences of dates by server by month. So using my example, I have this result:
Server1-July: 1
Server2-July: 2
Server3-July 1
What I really want (conceptually) is to be able to filter this pivot table by the matrix column which is the count. I just couldn't figure out how to do that :). Then I thought I could use this report (with pivot table result) as a filter into another report.
Hope you have some idea....:)
Thanks -
are there any security concerns using my PPC imac g5 running OS 10.5.8 and using Safari 5.0.6?
You could use a browser that does not use Flash or Java, as a safety measure when visiting sites; the Safari browser has no support or recent updates. TenFourFox v 24 is fairly good, and uses later Mozilla code, is compatible with powerPC computer limitations. SeaMonkeyPPC has a similar code, but acts a little different; and there still is iCab, a good browser that will run free, but asks you get a $20. license.
The Safari browser can be used to set a different browser up as system default, so it won't launch and open attachments or web pages; it has a setting in its preferences where you choose another browser as default. As I have four or five browsers and one dedicated to gmail (launched as signed-in, through notifier) that is how I've used the default, otherwise mine are all in the Dock.
There is no new upgrade for Adobe Flash plugin player, etc; but the one in their site for vintage is still available at getflash player at Adobe. Most prompts online are to get you something else, even adware loads up from some not-so-clever efforts to get people to install junk. So go to the source. Someone wrote a patch that is supposed to allow a later version of Flash player to work in older 10.5.8 PPC Mac, but I have not tried it.
The thread of security is mostly based on the user and their caution to avoid odd free software and also avoid some sites that try to get people to load cleanmymac or genieo, or other adware malware voluntarily. Those are troublesome and hard to remove, and can waste processor cycles, slow the computer & mess it up. Mostly from a browser the adware issues arise. For those you see The Safe Mac and read up on the adware removal guide, among others linked on the page: http://www.thesafemac.com/arg/
So anyway, there is really nothing new on the face of it for obsolete OS X systems users.
Good luck & happy computing! -
One or more ports used by the Compute Emulator are currently used by other processes
Environment:
VS 2012 Professional
Azure SDK October 2012
Windows 8
I lost the last few days of my life struggling with a weird issue in the emulator. I just ran out of options and I would really appreciate if someone could help me figure out what's wrong.
I am trying to debug a service package from Visual Studio 2012. It's really just about any package -- even the ones generated from a Windows Azure Cloud Service VS template. Any. The VS debugger starts, and in parallel there's "Starting the Windows Azure Debugging
Environment" dialog which shows "Deploying service package to the Windows Azure compute emulator..." message.
The progress bar shown in the dialog gets stuck for a long time (possibly even for an hour or longer!) at some 60% and then the following error message is shown:
"One or more ports used by the Compute Emulator are currently used by other processes. To resolve this, please see MSDN documentation at http://msdn.microsoft.com/en-us/library/hh472164.aspx"
There doesn't seem to be anything else listening on the ports mentioned on the above MSDN page. I did nevertheless try to re-map devfabric and agent ports by specifying different values in the .config files mentioned on the page, but that did not help.
What I also tried and did not help:
- reinstalled SDK, IIS Express, Local DB
- reinstalled VS 2012 (yes, I got that desperate)
- tried using IIS instead
- used SysInternals TcpView to check if there are any conflicts
- rebooted the machine: the deployment works initially (*once*), and the subsequent deployments fail (!)
- tried to kill all Azure-related processes in memory and restart debugging
- tried looking into log files under the user directory (dftmp\...); no errors in *any* log
- tried looking into Event Viewer logs (Azure-related and in general); no errors either
Since the conflict seems to be related to my current network settings, below is my IP
configuration. I am behind a router and I have DHCP activated, but again that should not matter since none of that has changed in the last few years (and the emulator did work until few days ago).
C:\WINDOWS\system32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : MYCOMPUTER
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . . . : 32-AB-30-66-BC-56
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2a01:e35:8a3a:9970:edd9:b989:b67a:5a8a(Preferred)
Temporary IPv6 Address. . . . . . : 2a01:e35:8a3a:9970:dc7a:4fe6:62a5:e54a(Preferred)
Link-local IPv6 Address . . . . . : fe80::edd9:b989:b67a:5a8a%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, December 16, 2012 21:26:30 PM
Lease Expires . . . . . . . . . . : Tuesday, December 18, 2012 09:26:14 AM
Default Gateway . . . . . . . . . : fe80::224:d4ff:fea2:9722%12
192.168.0.254
DHCP Server . . . . . . . . . . . : 192.168.0.254
DHCPv6 IAID . . . . . . . . . . . : 253808432
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-1B-EE-4D-20-CF-30-66-BC-46
DNS Servers . . . . . . . . . . . : 192.168.0.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7A96B710-3107-48B9-A7B2-2F261DDD91AD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:1caf:12ff:a75c:5668(Preferred)
Link-local IPv6 Address . . . . . : fe80::1caf:12ff:a75c:5668%14(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Below are the Azure SDK emulator configuration files, unmodified (as created by the SDK installation).
DevFC.exe.config
<configuration>
<configSections>
<section name="DevFCSettings" type="System.Configuration.NameValueSectionHandler" />
</configSections>
<!-- The following are options related to the SimulatorSetup -->
<DevFCSettings>
<add key="StartMACAddress" value="00155D201928" />
<add key="EndMACAddress" value="155D20193C" />
<add key="StartIPAddress" value="192.168.0.20" />
<add key="EndIPAddress" value="192.168.0.40" />
<add key="DipPoolStartIPAddress" value="127.255.0.0" />
<add key="DipPoolEndIPAddress" value="127.255.255.255" />
<add key="VipPoolStartIPAddress" value="127.0.0.1" />
<add key="VipPoolEndIPAddress" value="127.0.0.255" />
<add key="DefaultGateway" value="192.168.0.1" />
<add key="SubnetMask" value="255.255.255.0" />
<add key="InternalSwitchName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricSwitch" />
<add key="InternalSwitchPortName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricHostSwitchPort" />
<add key="InternalEthernetNICName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricEthernetNIC" />
<add key="InternalEthernetPortMACAddress" value="00155D201927" />
<add key="InternalEthernetPortIPAddress" value="192.168.0.2" />
<add key="InternalEthernetPortSubnetMask" value="255.255.255.0" />
<add key="StorageRoot" value="DFTemp" />
<add key="LogsDirName" value="DevFCLogs" />
<add key="DynamicPortAllocStart" value="20000" />
<add key="ManagementServicePort" value="15095" />
<add key="RepositoryServicePort" value="15096" />
<add key="AgentCallbackPort" value="15097" />
<add key="AgentPort" value="15098" />
<add key="PxeResponderPort" value="15100" />
</DevFCSettings>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
DFAgent.exe.config
<configuration>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
<appSettings>
<add key="AgentMAC" value="00155D201927"/>
<add key="AgentIP" value="192.168.0.2"/>
<add key="EnableActiveNotification" value="false"/>
<add key="StorageRoot" value="C:\DFTemp"/>
<add key="CopyFilesInStartRole" value="false"/>
<add key="LogsDirName" value="DFAgentLogs" />
<add key="EnableFileLog" value="true" />
<add key="AgentPort" value="15098" />
<add key="RuntimePort" value="15099" />
<add key="AgentCallbackPort" value="15097" />
</appSettings>
</configuration>
DFService.exe.config
<configuration>
<configSections>
<section
name="dfservice"
allowExeDefinition="MachineToLocalUser"
type="Microsoft.ServiceHosting.Tools.DevelopmentFabric.DfServiceConfigurationSection, DfService, Version=1.8.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
/>
</configSections>
<dfservice
ManagementServicePort="15095"
RepositoryServicePort="15096"
/>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
Finally, here's what TcpView shows while the emulator is stuck:
devenv.exe 3736 TCP MYCOMPUTER 7240 localhost 15095 SYN_SENT
devenv.exe 3736 TCP MYCOMPUTER 7245 localhost 15095 SYN_SENT
svchost.exe 4332 TCP MYCOMPUTER 7438 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10000 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10001 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10002 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15095 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15096 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15097 MYCOMPUTER 0 LISTENING
DFAgent.exe 14472 TCP MYCOMPUTER 15098 MYCOMPUTER 0 LISTENING
DFAgent.exe 14472 TCPV6 mycomputer 15098 mycomputer 0 LISTENING
DFAgent.exe 14472 TCPV6 mycomputer 15098 mycomputer 6399 ESTABLISHED
System 4 TCP MYCOMPUTER 15099 MYCOMPUTER 0 LISTENING
System 4 TCPV6 mycomputer 15099 mycomputer 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15100 MYCOMPUTER 0 LISTENING
Thanks in advance for help!
▼
▲
▼
▲Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲ -
I have a macbook pro with 10.6.8 on it but I need to do a clean re install and my CD is 10.4.6. Can I use the CD and then are my OS updates to 10.6.8 free?
Also can I use iMac OS install disks on a MacBookPro?You will have to buy Snow Leopard:
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order. You also should find it at your local Apple retailers.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements. -
in my itunes tab is images / photo disappeared. . can not get it back, so now I can not get pictures on my iphone??? I do not want to use the photo stream. there are others who have experienced this tab disappears
Make the iTunes window wider.
It is on the far right. -
Use coherence in Business Intelligence area
Hello, Everyone,
I am just wondering that is it possible to use coherence in business intelligence area? Does anyone has such experience?
As we know, building BI application is quite different from the online trading applications.
If we try to use database to fulfill a BI application, every SQL statement would process tons of data .
Maybe we should wait hours or days for one result sometime.
Therefore, I am thinking of the coherence. How could this platform help us? If we seperate data on different grid nodes and process on different nodes, that would be faster than pure database environment.
However, there are two significant problems that I could not avoid.
First, how to seperate data? if it beame a very complicated work, I think database would be better. At least, database provides one node partition mechanisms.
Second, how about the performance of QueryMap? Unfortunately, I did some test on QueryMap, the performance of QueryMap is quite worse than Oracle database.
Please give me some suggestions.
Best regards
Copper shenHi Moshin,
You have to learn SAP BW 3.5 along with ABAP and BI 7.0. Because BW 3.5 is the earlier version of BI 7.0.
BO is widely used for Reporting which can work on any database.
It's better to join in SAP Authorized Institutes like the following. It may be expensive.
1. Siemens
2. Yash
Etc..........
Regards,
Suman
Maybe you are looking for
-
Payment terms in PO and vendor master
PO should be able to override payment terms of the vendor master when a payment term in PO is different from the payment term in vendor master.How do I make it work? Regards - SS
-
I have an indesign document with pages A B A B A B A B A B etc. When sent to my iPad the pages are in the correct order but the strip along the bottom has them as AAAAA BBBBB AAAAA BBBBB. What have I done wrong? I used the web view setting. Also the
-
How do I change the "by" field in the iTunes Preview page for my podcast?
The name of the podcast has changed, but it now looks like this on the iTunes preview page: https://itunes.apple.com/podcast/[new name]-podcast/[numbers] iTunes Preview [new name] podcast By [old name] I can't for the life of me figure out how to cha
-
Connect JavaFx(Applets) to J2EE - best practice & browser session
Hi there, Im new to JavaFX and Applet programming but highly interested. What I dont get at the moment is how you connect the locally executed code of the applet to your system running on a server (J2EE). Of course there seem to be different ways b
-
How do I open a CR2 file using CS3 photoshop
how do I open a CR2 file in CS3