Using guitar rig in logic -9 but not getting same sound....

Hey fellow logic users
                          Ok heres the problem ( cut to the chase )  I am hooking up my guitar directly to the audio box direct to input 1  I have guitar rig in my  plug in section now when i play the song and want to play along It comes out clean, but when i press record enable it plays like the guitar rig sample i created  then when i press the space bar to start playback to practice it  it plays clean but then whe i record it  comes out slightly not the way it sounds when not recording  I hope this is understandable  lol : )   what do I need to do to make what I sound like in the guitar rig while rehearshing it so it comes out the same and not clean.  I put the playback knob on my audio box in the middle so i can hear the drums bass e.t.c  aong with the guitar but still no dirty sound during rhearsal before recording      Thanks

Check under the audio menu options that "auto input monitor" or something like that, is enabled.

Similar Messages

  • TS5150 We just set up our Apple TV 3rd gen but not getting any sound. We have the boss system hooked up to the cable tv. Support could not help us, we were told to call Boss.

    We just set up our Apple TV but not getting any sound. We have the Boss sound system. Support could not help us they directed us to call a Boss.

    Do you mean Bose sound system? What model?

  • I am using flash media decoder 2.5 and not getting and sound

    im not running a camera as device . im trying to run usb 2861 device
    thanks in advance

    if i try the camera with the mic as device there is still no sound.

  • Not getting any sound trying to record external synth in GB

    I'm trying to record my Alesis Andromeda synth into GB but not getting any sound. I am using an Emagic AMT-8 as a midi i/f & a MOTU 828mkII as a soundcard. Both are set up correctly in core midi/audio as I normally use Logic Pro 7 with no problems.
    In GB I add a new real instrument track & select the relevant input to corespond to my 828mkII, I then turn monitor 'on' but I am not getting any sound back to the 828mkII. Preferences shows that this soundcard is recognised.
    I can play AU instruments or GB instruments from the Andromeda so the midi connection is good.
    Any ideas? cheers....

    The Andromeda is plugged into line inputs 1&2 of the 828mkII (which is inputs 3&4 as the mic inputs are 1&2), The outputs of the 828mkII are plugged into my Genelec monitors. I know the set up works as I use Logic all the time, just can't get any sound in GB.
    thanks.

  • HT1199 I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE. It would not load and said the following. System extension cannot be used.

    I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE.
    It would not load and said the following. System extension cannot be used.
    The system extension "/system/library/Extensions/AppleUSBthernetHost.text" was installed improperly and cannot be used.
    Please try reinstalling it, or contact the product vendor for an update.
    I do not have a copy of the OS X 10.6.8 software. It is second hand so I have no product vendor to contact.
    What can I do?

    You recently updated iTunes to v.11.4? This message has popped up on many a Mac screen when this version was first made available, because this kext was obviously faulty.
    You should try to download iTunes 11.4 again from Apple's website: the new version bears the same name, but this kernel extension has been updated, and the issues it was causing are now a thing of the past.
    Should solve your problem, too...

  • Using Guitar Rig 4 / Amplitube 3 in Logic Pro

    Hi,
    I'm using Guitar Rig 4 and Amplitube 3 as inserts in my Logic 9 projects and all is working fine.
    However neither GR4 or A3 respond to MIDI cc changes from my Apogee GIO foot controller. I've been able to get both products to respond correctly to patch/stompbox changes on the Apogee GIO when used "stand alone".
    It looks like when used as an "insert" the Apogee Gio MIDI cc info is not getting thru - When using Ampdesigner/Pedelboard (which I don't very often) the Apogee GIO MIDI cc functions correctly.
    Is there a way of getting the MIDI CC messages thru to an insert?
    Thanks for you help

    Insert them as "Midi controlled AU" Plugs into an instrument slot, there is an xtra folder for those Plug-Ins and many manufacturers supply these versions.

  • Using Guitar Rig 5 in MainStage

    Hello all!
    I'm just getting started with MainStage, and so far quite liking the possibilities.
    However, I've hit one thing which seems to be an issue for me, assuming I've understood it correctly. Each patch seems to have it's own channel strips, with it's own AU instruments etc... which to me seems a bad idea. Surely in this state, I will end up having hundreds of AUs running for the same software, which would slow things down?
    On top of that, I'm running keyboard, guitar and vocal through Mainstage. All for me, as I switch what I'm doing depending on the song we're performing (and sometimes mid-song). However, this means I may sometimes want to change a guitar patch while keeping my keyboard the same, or vice versa.
    So, to my question; is there a way to change AU presets without changing MainStage patch? I mainly need to do this with Guitar Rig 5 from NI, but I'd also quite like to do it with Massive and Reaktor too.
    Not quite sure I've worded that very well, so an example:
    I have a MainStage layout set up, which has my vocal going through clean with maybe some EQ etc. I've also got a guitar running through Guitar Rig 5, and my keyboard into Massive. During a song, I start off on keys playing Fat Bass 1 on my keys in Massive for the intro, switch to a distortion for the verse with my guitar, then Fat Bass 2 for the chorus in Massive. Maybe later I'll want a clean guitar in a bridge or something too, with some string hits thrown in from Massive again.
    The way MainStage is set out currently, I'd need a patch for each combination, which would leave me with at least 3 "patches" for one song and three instances each of Massive and GR running. I'd much prefer to just send in a control message to change the presets in Massive and Guitar Rig.
    Running on a 2014 15" MacBook Pro, 2.2GHz i7/16GB RAM/256GB SSD.
    Thanks

    I haven't been able to find a way to get it to work with Guitar Rig yet, but for Massive (and presumably Reaktor) I have found a solution. First, create an instance in MainStage, load it with Massive and load the presets you would like to use into Massive's preset bank. Turn it on so that it will respond to patch changes.
    Navigate to the 'Assignments & Mappings' tab of the edit page. Find the device you want to use to send the MIDI CC messages. If it isn't in the list, click on 'New Assignment', which usually creates an Unmapped assignment in the 'All Devices' list. Click the area where it says No Assignment to bring up the Hardware Input popup menu. Choose your device, assign channel to 1-16, and change Type to absolute. From the number menu, choose the CC number you want to send the patch change. Set MIDI thru to Automatic. Name the input to something like CC to PG01.
    Click on it to highlight the mapping info. In the far left side of the Control Inspector, you'll see a list of items such as Same as Input, Block, etc. You will also see the name of the instance containing Massive. Select it to bring up a list of control parameters, such as Volume, Mute, etc. From the list, choose MIDI Controller. The third item down in that menu is Program Change. Select it.
    You'll see the Parameter values for Program Change. For saved value, select the Program Change number you want to send. Number scheme is 0-127. Now, here's the tricky part that nearly drove me mad before figuring it out. For NI instruments, one of the Range Max or Min numbers must be set to zero and the other to a non zero number. If you want to select PG 0, set saved value as 0, range max as 1 and range min at 0. For any other patch number, set saved value and range max to the same number and set range min to 0.
    Also, make sure that the device thats sending your CC control message is configured as a toggle switch, not a momentary, or else it will send the range min program change number when you lift your foot or finger from the button. If you want to send multiple patch changes, add more mappings and assign different CC numbers to select the patch number you desire.
    An additional benefit is that you can load up a single instance of Massive with as many presets as it can hold and use aliases of that instance for other songs. In this case you would create a new MainStage patch and populate it with an alias of your Massive instance. Set up a separate hardware input (I use logic remote) and rather than setting the number to a CC controller, set it to Any. By entering the same NI mapping parameters as above, it will send the correct PG info to Massive when you select the MainStage patch containing the alias. If you need to select multiple Massive patches from the new MainStage patch, simply assign the CC controllers to select new patch assignments. All that info is freely assignable and saved on a per MainStage patch basis, so your first instance could select the patch (say 0) and use three CC controllers to set patches 1-3. On the next MainStage patch containing the Massive alias, you could set the PG to select patch 4 and those same controllers can be set to select patches 5-7.

  • Using Guitar Rig

    Think I found some limitations on using Guitar Rig with Mainstage. I have also posted this on NI's forums for some sort of resolution.
    It appears, even though you can control just about every other parameter of GR in Mainstage, you are not able to assign a Mainstage controller to a GR controller. Therefore any mappings within GR you have assigned to a controller (i.e. effect on/off, parameter moifier, etc.), you can not set that controller to be set by Mainstage. Also, I see no way to change the GR patch directly within Mainstage as appears to be available on such things as the EXS.
    Also, you are not able to set GR as a software instrument with the guitar input on the sidechain within Mainstage. You still can in Logic Pro, but it is not available in Mainstage. Perhaps this is why those patches and controller assignments can not be controlled?
    Anyone have any idea how to get this functionality working in Mainstage?

    Think I found some limitations on using Guitar Rig with Mainstage. I have also posted this on NI's forums for some sort of resolution.
    It appears, even though you can control just about every other parameter of GR in Mainstage, you are not able to assign a Mainstage controller to a GR controller. Therefore any mappings within GR you have assigned to a controller (i.e. effect on/off, parameter moifier, etc.), you can not set that controller to be set by Mainstage. Also, I see no way to change the GR patch directly within Mainstage as appears to be available on such things as the EXS.
    Also, you are not able to set GR as a software instrument with the guitar input on the sidechain within Mainstage. You still can in Logic Pro, but it is not available in Mainstage. Perhaps this is why those patches and controller assignments can not be controlled?
    Anyone have any idea how to get this functionality working in Mainstage?

  • Realtime Playing of Guitar Rig thru Logic: FW800 interface?

    Hi , it would simplify my life so much to be able to play my N.I. Guitar Rig thru logic as a plugin. I'm about to get the G5 Quad and am wondering about the metric halo 2882(which is FW 400) or the fireface 800. is there a better chance of ultra-low latency thru FW 800 ? I've read that people are playing in realtime through logic , a drummer i spoke with said he's plying the BFD plugin in realtime, so that seems pretty promising, but will i be able to do that with a firewire interface? i have Motu 2408 now but i'm selling it to switch to the quad.

    I use GuitarRig all the time and have no latency issues using a Fireface 800. Both the Fireface and the 2882/ULN2 have great and fast converters so there shouldn't be much difference there. However, drivers are the most important. RME's drivers are excellent and the actual hardware does its own metering calculations so you have realtime results in the RME mixer and the host CPU doesn't have to any extra background processing for the driver. I would assume that MH hardware/drivers operate the same way.
    One thing to clarify, though, is that you can sum hardware inputs into the DAW mixer using RME's mixer. It's probably a less intuitive process compared to the MH mixer, but it's functionality still resides in RME's TotalMix software.
    90% of my sessions are recorded at 24/48 and I usually use a 128 sample buffer without noticeable latency. I've even tried 256 and didn't find it noticeable either. For comparison, I perceive the same amount of latency (which is pretty negligable) when playing through AmpFarm on PT HD Accel, and GuitarRig through the Fireface 800 with a 128 sample buffer (both sessions @ 24/48)
    Hope this helps.

  • Guitar Rig  and Logic Studio

    The Guitar Rig that is in MainStage;
    How do I insert that into a Logic Studio 8 track?
    I'm assuming I'd start with an Audio track as opposed to MIDI.
    Just can't seem to locate the Guitar Rig - only Guitar Amp Pro.
    Thanks

    I picked up the answer;
    Create an Audio track in Logic with open library selected.
    You will see the mainstage guitar rigs in the library.
    Note that they do not appear when creating a software instrument.
    For those of you interested - this works fine!

  • Hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox v

    hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox version 3.6.3 and 3.0....I had 3.6.3 already open ..i closed it to... open 3.0 ....when i opened 3.0 it asked me to import settings i said no....it opened well.....then i close 3.0 and tried to open 3.6.3 version ...now it was a problem everything got lost sessions, bookmarks, add ons, etc....it went back to default ....when i had 2 profiles in 3.6.3.....can any pls help me on dis 1...is there a way to restore my sessions, bookmarks and add ons ??? I have uninstalled 3.0 version now....??? pls pls pls ....help
    == This happened ==
    Just once or twice
    == today

    It turns out that the problem had to do with network accounts, even though it was not clear at first.  Redirecting the program to the local machine's cache with a network home redirector script fixed the issue.  Thanks anyway.

  • How can I use 2 iPhone 4's on same iTunes account, but NOT sync same contacts?

    How can I use 2 iPhone 4's on same iTunes account, but NOT sync same contacts?

    They need to be registered under different Apple ID's.  The initial Apple ID is set when you first start the phone up.  If you've already registered the phone to the iTunes account, back it up to your computer, and then have iTunes do a factory reset.  Go to www.icloud.com, log in with your current Apple ID, select "Find My iPhone," choose the iPhone you want to dissociate from your primary Apple ID from the upper left, and then click the little circled X ("remove").
    When you start the phone, it will have you go through the setup process again, at which time you need to create a unique Apple ID for the device.  You can then restore it from your iTunes backup to get back your apps and other settings.
    Whenever you use the iTunes store, use the login information (Apple ID and password) that you were using before.  Basically, the second Apple ID that you created is purely used for accessing iCloud services, which includes synchronization of contacts, iCal events, and other such things.

  • I m using iPad mini, mistakly I clicked on restore factory now it require apple id and password which I inserted but not get success I really do not know any other apple id to restore its settings. I used .

    I m using iPad mini, mistakly I clicked on restore factory now it require apple id and password which I inserted but not get success I really do not know any other apple id to restore its settingsI used last time.
    < Personal Information Edited By Host >

    It sounds like this iPad was purchased second hand.  If so, you will need to contact the original owner, otherwise your iPad will remain Activation Locked.
    Find My iPhone Activation Lock - Apple Support

  • How to use the dll  created by c++ but not write a jni wrapper around

    how to use the dll created by c++ but not write a jni wrapper around through a java program. now I can't access that dll like this directly from java.

    Your question is unclear. (You haven't said what dll you are talking about.)
    But:
    If you are talking about an existing dll, then the only alternative to writing a wrapper is to use one of the wrapper generators floating around. Do a search on JACE.
    If you are talking about a dll you are writing, then run jah and get the interface to match java right away; then you won't have to write a wrapper.

  • Late 2007 MBP went black screen. I've been told it is the logic board but not due to the Nvidia GPU

    My sister's Oct 2007 MBP just died suddenly. Yesterday when she opened Entourage it said it couldn't open because there wasn't enough memory. We rebuilt the Entourage Identity and it then worked fine. It wouldn't shut down though, and when woken from sleep went gray then black. The apple store here in Spain says it is the logic board but not due to the Nvidia GPU, and it's not worthwhile to replace it. Is it possible they are wrong? They also say it will cost about 800 Euros to replace! It's a 2Ghz Core 2 Duo/2GB/256MB, EMIC No: 2136.

    Go step by step and test.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405

Maybe you are looking for