Using Headphone Jack with Multiple Displays with Mavericks

I recently installed Mavericks on a 2011 Mac Mini (previously was running 10.6.8); the Mac Mini is connected via HDMI to my HDTV in my living room and connected via mini display to HDMI to a second HDTV in my basement. I am running an extended USB cable to the basement to have a keyboard/mouse at each HDTV (living room is using a Bluetooth keyboard/trackpad).
After I installed Mavericks, I was immediatley having problems with my monitors. Each monitor showed up in my audio settings, but for some reason, I could not select the living room HDTV for sound, it just bounced off the HDTV name and went to another selection. After analyzing it for a while, I determined that when I had a line into my headphone jack, I could not select that living room monitor. As soon as I removed that line, I could select it (as an fyi, the other HDTV in the basement worked fine for sound with the headphone jack being used). I would prefer to be able to use the headphone jack as I have that plugged into my home theater system to play sound through my sound system.
Also, whenever I reboot my Mac Mini, my extended cable USB keyboard/mouse becomes unusuable and I have to unplug the keyboard & mouse and plug them back in for them to work and recognize the keyboard/mouse. The USB maintains power as I plugged my iPhone into it and got a charge after a reboot of my Mac Mini, it just doesn't automatically pickup the keyboard/mouse. Everything worked perfectly in 10.6.8, so any solution(s) would be welcomed so I don't have to go back to that OS.
Thanks.

Actually, there is an adapter that will do exactly what you want:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6B2 FAAD2&fnode=home/shopiphone/iphoneaccessories/headsets&nplm=TN544LL/A
If you read one guy's experience, he says:
"I can even use it to connect to the auxiliary jack of my car stereo so the call goes through the car speakers and I use the adapter's microphone to speak. "
So this ought to do ya. (And, of course, the iPhone music will indeed pause when the call comes in -- this happens even if you are using "normal" headphones).

Similar Messages

How do you use multiple displays with a MacBook Pro and iMac

I have an iMac and a MacbookPro laptop both upgraded to OS X 10.9 (Mavericks). I'd like to use multiple displays with them. Can I do this without an Apple TV? They are both on the same network. If I can, can someone please give some instructions on how this can be done?
Thanks!

Both computers have ports for external monitors. Check your user manuals. Only one display can be added to the MBP, but newer iMacs have dual Thunderbolt ports.
Do your own Google research to learn what to do, but reading your manuals should be all you really need. It' not rocket science yet.

Analysis Authorization based on Hier node with multiple display hierarchies

Hi guys - I've got a problem where s.o. might have an idea of how to switch on the light at the end of the tunnel, I am currently standing in:
Requirement:
Cost Center Authorization should be given through RSECADMIN, reporting should be possible for any hierarchy that exists for the authorization relevant info object.
Preferred solution:
The Cost Center Analysis Authorization should be given through RSECADMIN - Hierarchy node assignment.
u2022     A dedicated Authorization Cost Center Hierarchy will be maintained in ECC6 as an alternative cost center hierarchy and extracted into BW.
u2022     The RSECADMIN Hierarchy node assignment should be based on a particular node (Type 2).
u2022     The display level will be specified as required (here: Level 7)
u2022     The Authorization granted should be independent of hierarchy name and version (validity 3).
Reporting Scenario and technical impact:
As mentioned above, when designing and running a query the user should be able to freely select other (i.e. than the authorization) display hierarchies for the authorization relevant reporting object 'Cost Center' as well. The technical names of the semantically relevant hierarchy nodes could therefore vary. E.g. cost centers 1, 2 and 3, being assigned under hierarchy node u2018Au2019 of the RSECADMIN relevant authorization hierarchy, could be subsumed by hierarchy node u2018Bu2019 in another display hierarchy, which the user may want to display in accordance to his reporting needs. Ideally, the alternative display hierarchy should therefore display node u2018Bu2019.
My findings so far (based on prototyping) turn out that this is not possible as long u2018Bu2019 (and its hierarchy) is not authorized in RSECADMIN. Can these findings be confirmed? And if not, would anyone have an idea of how to facilitate the reporting scenario?
Would there be any other way to grant access, possibly based on RSECADMIN single values, and also enable the user to flexibly display hierarchies with only those hierarchy nodes whose single cost center values the user has been given access to?
Thanks everyone for your input...
Claus
Edited by: Claus64 on Jul 13, 2009 4:10 AM

HI CLause,
On Jul 14 2009, you wrote in SDN and said:
FYI: Found a solution...
The hierarchy analysis authorization will be based on a navigational attribute of cost center.
With analysis authorizations it is possible to declare the Auth object (e.g. 0COSTCENTER__RACCAUT0) as authorization relevant and leave the superior object 0COSTCENTER auth irrelevant.
The auth will be given for 0COSTCENTER__RACCAUT0. This object will be placed as a filter of the query, being restricted by an Authorization variable for hierarchy nodes.
Due to the concept of Analysis Authorizations, this variable will automatically pick up the nodes granted as part of RSECADMIN Hierarchy based Authorization.
As mentioned above, 0COSTCENTER as the regular reporting characteristic remains auth irrelevant and can therefore take any hierarchy thatu2019s available. Reporting on single values will be possible, too. Only those nodes show up that hold the authorized cost centers in accordance to the authorization.
If the auth relevant 0COSTCENTER__RACCAUT0 is not used in the query definition by either not taking it in as a filter or skipping the Auth variable, the query will launch the message that the authorization is missing. No data show up at all.
Claus
See this thread:
Analysis Authorization based on Hier node with multiple display hierarchies
I am also in the same situation as you and need to understadn your solution. I understand that you created a Nav Attr on 0COSTCENTER and made this auth relevant whilst ensuring that 0COSTCENTER is NOT auth relevant. This is all fine. The issue was you have multiple hierachies for 0COSTCENTER, how did the new Nav Attr help you solve your issue. When loading 0COSTCENTER what values did you load ino the new Nav Attribute and how did that link to the hierachies? Also, in RSECADMIN you created hiearchy nodes based on the Nav Attribute but I am confused as to what values you have in the Nav Attr.
I appreciate if you can share your solution from the past in more details.
many thanks

When I go into full screen mode in Safari 5.1 on LION it switches to a new Space, making my other displays useless. Anyone else annoyed that Apple has completely left out those with multiple displays?

I had a fear that this was going to be the case, but you can't have two full screen apps open in two different displays. At least that's how Safari fullscreen works. When switching over to full screen mode in safari, it automatically creats a new space, turns on four finger gesture to swipe through full screen apps which I had turned off in place of App Switcher.
I don't use spaces because of the lack of support for using spaces with multiple displays. I would use spaces and mission control if I had control of each display's mission control separately.
The fix would be to unlink the displays so they can scroll through full screen apps by themselves. I want this feature so I can mix and match the full screen apps on my three different displays. I see this beneficial for more people with multiple displays. in the future when thunderbolt display links, people will want better support too.
I know I would use spaces and mission control more if I could have this ability. I'd be interested to know people's opinion.

No no, if you read what I said, it would be that each individual display would be customizable to the user. The way you have it, it sounds like your second display will be dedicated to scrolling through fullscreen apps not allowing you to do it on the home screen. This is silly because with my concept, you could do that, by dragging apps to fullscreen in your second display, but if you want you could tell another display to scroll through fullscreen apps (independently) if you wanted. Each display will have it's own mission control with it's own set of desktops. I also can see how some people would still want them linked together, so this could just be a little check box made in mission control prefs to "link" or "unlink" desktops with link checked by default.
With your solution you're limited to your setup. but what if the person has three or four displays? Well then your solution would limit them to one dedicated display that scrolls through fullscreen apps where mine lets a person customize their desktops depending on their preference and setup.
further example: if you have safari, address book and mail in one display, you could still have ichat, PS and Illustrator in your second, and a text editor, FTP Client and iTunes in your third. Then you would mix and match these apps but it would promote the use of mulitple displays as well as benefit people with three or more, which thunderbolt, Cinema Display and Pro computers support.

MOVED: Multiple Displays with AGP and ON-Board

This topic has been moved to AMD SocketA based board.
Multiple Displays with AGP and ON-Board

Glen i just wanted to test try something new.
I want to know if there are anything i should know about my board?
Do you think the KM4M-V is a good board to have?

Multiple Displays with AGP and ON-Board

Is it possible to do multiple displays with an AGP and OnBoard videocards?
If yes, please inform me how to activate it eg. jumper setting or bios settings.
If no explain exactly why not.
My apologies. The board is a KM4M-V

Glen i just wanted to test try something new.
I want to know if there are anything i should know about my board?
Do you think the KM4M-V is a good board to have?

HT3131 I purchased a sony 3d monitor and I am using it for my external display with my macbook pro. We have followed the instructions but no display!!?? What do I do

I purchased a sony 3d monitor and I am using it for my external display with my macbook pro. We have followed the instructions but no display!!?? What do I do now

We need more information if members of the forum are going to assist you.
What instructions did you follow?
How are you connecting your MBP to the Sony TV?
Which model MBP do you have?

What does the red dot in the headphone jack have to do with my phone not holding a charge, my phone has never been wet.

My phone has never gotten wet. My phone doesnt hold a charge for more than about 3 hrs., so I brought it in to Verizon about the battery. The lady looks into the headphone jack and says it has a red dot its not under warranty any more. What does the headphone jack have to do with my battery.

The "red dot" is a moisture sensor. If it is red, then your phone did get wet, or was exposed to excessive moisture, which voids the warranty. Liquid/moisture inside the phone can compromise or short out the electronics, causing excessive battery drain.

Web dynpro screen with multiple rows with columns that can be edited

Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
Debbie

Hi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant

[svn] 949: Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name , it causes a ClassCastException in the server

Revision: 949
Author: [email protected]
Date: 2008-03-27 07:12:59 -0700 (Thu, 27 Mar 2008)
Log Message:
Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name, it causes a ClassCastException in the server
QA: Yes - try again with legacy-collection true and false.
Doc: No
Checkintests: Pass
Details: Another try in fixing this bug. When legacy-collection is false, Actionscript Array on the client becomes Java Array on the server and my fix yesterday assumed this case. However, when legacy-collection is true, Actionscript Array becomes Java ArrayList on the server. So added code to handle this case.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-96
Modified Paths:
blazeds/branches/3.0.x/modules/proxy/src/java/flex/messaging/services/http/proxy/RequestF ilter.java

Hi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all!

[svn] 931: Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name , it causes a ClassCastException in the server

Revision: 931
Author: [email protected]
Date: 2008-03-26 11:31:01 -0700 (Wed, 26 Mar 2008)
Log Message:
Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name, it causes a ClassCastException in the server
QA: Yes - we need automated tests for this basic case.
Doc: No
Checkintests: Pass
Details: RequestFilter was not handling multiple headers with the same name properly.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-96
Modified Paths:
blazeds/branches/3.0.x/modules/proxy/src/java/flex/messaging/services/http/proxy/RequestF ilter.java

Hi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all!

When will the iPad with retina display with wifi cellular be available in Australia

when will the iPad with retina display with wifi cellular be available in Australia

http://store.apple.com/au/buy/home/shop_ipad/family/ipad
It already is. Estimated shipping time of 1-3 business days

I have an A5X chip iPad with retina display with AppleCare . If my iPad broke would apple replace it with the updated iPad with retina display?

I have an A5X chip iPad with retina display with AppleCare+ . If my iPad broke would apple replace it with the updated iPad with retina display that has the A6X chip?

They will replace your "broken" iPad with an iPad of equal type .... so NO, they will not replace it with a new iPad 4th generation. They will actually replace your "broken" iPad with a refurb, not a new one.

Boot up time of MacBook Pro 13" 2.5GHz i5 vs MacBook Pro 13" with Retina display with 2.4GHz i5

Hello
Does anyone know
"the boot up time of MacBook Pro 13" 2.5GHz i5 vs MacBook Pro 13" with Retina display with 2.4GHz i5?"
Thanks

A bit simplifying :
there are two parts in boot process - one-before spinning thing, other - spinning thing to desktop.
First part is hardware inits, you can not speed it up. It is for sure longer for your MBP than for her - its normal, more hardware and it is more sophisticated so longer init.
Second part depends on HD (SSD) speed.
Say so - I have M4 SSD and second part is 1 to 2 spins until login window. Should be more or less same for you.
If it is not so - probably something is not good with filesystem and some config files, most probably due to cloning instead of install. Reboot from recovery, repair drive (first - drive as a whole, second - boot partition), then reboot permissions. reboot two times as normal. see what'll happen with timing.

Hello. I have iPad, new one, unpacked. but unfortunately I lost my check Can I exchange my iPad for a new one with retina display with extra payment?

Hello. I have iPad, new one, unpacked.
but unfortunately I lost my check
Can I exchange my iPad for another one with retina display with extra payment?

Did you purchase it at an Apple Store? If so, then you should be able ot have them look up the receipt in their system. If you purchased it at another store, check their policies. IIRC, Best Buy allows you to exchange items without a reciept, but they won't refund without one. Other stores may have other policies.

Using Headphone Jack with Multiple Displays with Mavericks

Similar Messages

Maybe you are looking for