Using HH 5 with ASUS RT-AC56U

Brother is having issues with signal dropping out on his HH so purchased a second router to to help. I went and tried to set it up to work with his HH but with no success - The asus was never able to connect to the internet anyone had any experience of these two products working together? Also another issue was that the Asus kept dropping the router password and was requiring a factory reset with variable degrees of success
Thanks
Kenny

Good article about wifi and optimising it
http://www.increasebroadbandspeed.co.uk/2014/wifi-optimisation
not sure how things will work with Asus connected to the HH in terms of wifi, but might be OK assuming you are going to set it up with a separate wifi network?
I would still suspect the signal drop might now be wifi and might be the BT fibre connection - to their servers - be intereted to see how you get on.
I have utilised homeplugs to reduce the load on my wifi network - very happy with them, my sky box and smart TV's use homeplug connections.

Similar Messages

Can I use time capsule with a ASUS (RT-N16)router?

I will use a router with vpn. Can I use time capsule with it? And if yes, how do I connect them?

There is no vpn built into the native firmware of N16 so I presume you are going to use third party.
Just plug in the TC and bridge it.. ie go to Internet tab of airport utility and select connection sharing off.
wireless then you will need to figure out.. you can setup roaming on 2.4ghz by using identical wireless name = ssid and security but lock both to different channels.. pick out of 1, 6, 11
In a PC network make sure you use the TC with a new name.. no spaces no special characters.. same with wireless. TC also restrict wireless on 2.4ghz to only 20mhz.. if you have the N16 set to 40mhz you will have to be extra careful with channels.. 40mhz will use up two channels and only one remains.. so your household will have filled the 2.4ghz.
Someone suggested you can turn off 2.4ghz in the TC by not naming it.. When I try that it kicks up an error that it has to be named. So perhaps someone else has a suggestion of how to turn off 2.4ghz.
You can turn off 5ghz by unchecking it. Seems mighty strange that you cannot turn off 2.4ghz but you can turn off 5ghz.

How to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

how to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

I think I got a little ahead of myself explaining my problem, so let me clarify...
Only the one iMac is having the network file deletion problem, but it is included in the network user logon problem. So 4 out of 5 of the iMacs have had or are having logon problems with network users accounts using mobile accounts on the systems. 2 of the 4 I have wiped and started over on and the other 2 have different network accounts being used by the primary system users. The 5th iMac has not caused any problems except I forgot to mention that the USB on it seems flaky.
So we are apparently full of problems.

C7 bluetooth is notworking with ASUS k53sc bluetoo...

Hi,
C7 bluetooth is notworking with ASUS k53sc bluetooth 3.0 HS.
only 2 sec its shows connected after 2 sec it will show disconnected.
Trying to solve this issue.
If any one have idea to resolve please share with us.
Thanks,
Balaji

Hi uazzino,
Welcome to the forums and thank you for your post.
Please have a look at this thread where a similar issue with Belle/Bluetooth has been discussed, you will find some useful information.
Hope this helps,
Sergent
If my response has helped you in any way, show it by hitting the WHITE STAR... If you don't a MONSTER will come and eat your lunch...
Also hit the Accept as solution button, so OTHERS can benefit from this helpful answer...
DON'T BE SHY...

MSI GTX560ti is it compatible with Asus p8z68-v?

Hi
I tried to write in English.
I have a
graphics card MSI GTX560ti
Mothercard Asus P8 Z68-V
Processor i7 2600k
Power 650W
=>no detected by Windows 7 64 bits
=>nothing appears in the Control Panel
=>no notification
=>Drivers installation impossible,
=>Lucid virtu the same thing
Do you know how make ?
How make to use this graphic card with my DVI monitor ?
Merci and sorry for my english

Your problem is most likely with ASUS, if both Gainward & MSI 560 Ti won't work then it's probably not the VGA cards, it's bad ASUS BIOS or problem of some kind with your MB. We can't help you here with it. You should still test those 2 560 Ti's in another PC.

How do I use your iPhone with multiple iTunes libraries

Hi, I have my music spread out between 3 seperate Itunes libraries on 3 different profiles on my computer. I have the newest generation Ipod Nano, Ipod Shuffle, and Iphone 4s. My Ipod's are both full, so I've decided to start putting music onto my phone. With my Ipod's, I can plug them into one profile on the computer, download the music on the Itunes library that exists on that profile, then do the same with the other profiles with no issue. However when I try to do this with my phone, It asks me to erase the music I have gotten from one Itunes library and sync with the current library, as soon as I plug it in to a different Itunes on one of the other profiles. I have my Iphone configured with the Manually manage music option, and I still haven't found a way to use my Iphone with multiple music libraries. PLEASE HELP

http://support.apple.com/kb/PH12113 - If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.)
http://support.apple.com/kb/HT1202 - When manually managing content, you can add content from multiple libraries to your iPod or iPad. Even when manually managing music, some content may be available from only one library at time. This includes all content on iPhone and video content on iPod and iPad.
They seem inconsistent as far as the iPad is concerned but in both articles the iPhone appears to only be able to sync to one library at a time.
Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Error while using between operator with sql stmts in obiee 11g analytics

Hi All,
when I try to use between operator with two select queries in OBIEE 11g analytics, I'm getting the below error:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <select>: Syntax error [nQSError: 26012] . (HY000)
can anyone help me out in resolving this issue.

Hi All,
Thank u all for ur replies, but I dint the exact solution for what I'm searching for.
If I use the condition as
"WHERE "Workforce Budget"."Used Budget Amount" BETWEEN MAX("Workforce Budget"."Total Eligible Salaries") AND MAX("Workforce Budget"."Published Worksheet Budget Amount"",
all the data will be grouped with the two columns which I'm considering in the condition.
my actual requirement with this query is to get the required date from a table to generate the report either as daily or weekly or monthly report. If I use repository variables, variables are not getting refreshed until I regenerate the server(which I should not do in my project). Hence I have created a table to hold weekly start and end dates and monthly start and end dates to pass the value to the actual report using between operator.
please could anyone help me on this, my release date is fast approaching.

Are there advantages to using Adobe Bridge with Premiere Pro?

I frequently use pictures with my videos. Normally, I use Windows Explorer with the picture viewer to browse for what I'd like to use. I've experimented with Bridge, finding it to be a memory hog and slow. It got me wondering - Are there advantages vs. Windows Explorer?

Bridge can be used to easily add hierarchical keywords to large amounts of clips (and afaik it's the only tool in the Adobe suit that can do hierarchical keywording with video files). Those keywords can then be used to find clips inside of Premiere. On large projects (1000+ clips) that can be a life saver.
Apart from this and the features you mentioned (the cross software color stuff is useless for video as of CS6), I did not find any use to Bridge for video. Plus as you said, it is a memory hog, slow and in my own experience unstable with / not adapted to video.

Using AJA IO with the FCP Voice Over Tool

Has anyone used the io with the VO tool? I have gotten it to work in the past, however, there are a number of convoluted settings to go through to get it to work. It seems intermittent. Today it doesnt want to work at all.
Does anyone have a list of the specific A/V settings, Capture presets, etc, that i need to have set in order for this to work?
FYI--I have never had a problem capturing from tape--(using log and capture with beta, digibeta, dv, vhs)--only when capturing analog audio using the VO tool.
gracias.
dk

You can do it here, in the Audio/Video settings under the Final Cut Pro menu. Click on the Capture Presets tab, then go to Generic Capture Template, duplicate it, then edit. Give it a name that you can recognize when you need to set up your project.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

How do I use a DAC with my Airport Express ?

Hello,
Can I use a DAC with Airport Express ? If yes, how ?
TIA

check out this CNET Crave article: Using Apple's AirPort Express with a DAC: A how-to guide

How do I use my ipad2 with apple tv

How to connect and use my ipad2 with apple tv---the laptop works but can't get apple tv to recognize iPad

The iPad only words with it by using it A's AirPlay output

How do I use my ipad with Apple TV?

How do i use my iPad2 with Apple TV?

If it's an ATV2 or 3, you can use AirPlay. AirPlay automatically becomes available when the two devices are on the same Wi-Fi network.
HOWEVER! You should be aware of that AirPlay is, in some circumstances, far inferior to VGA / HDMI-cabled solutions. Please see my posts at https://discussions.apple.com/message/18697551?ac_cid=sa123456#18697551 for more info.

How do I delete an associated device in iTunes) namely my iphone 6 (8.1) I am using an imac with Yosemeti

How do I delete an associated device in iTunes) namely my iphone 6 (8.1) I am using an imac with Yosemeti

Howdy nzh50,
It sounds like you have a device associated in iTunes with your Apple ID that you would like to remove from your account. This article should help you out there:
iTunes Store: Associating a device or computer to your Apple ID
Removing an associated device or computer from an Apple ID
To remove a device or computer from your Apple ID:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Click the Remove button next to the device name you would like to unassociate.
Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
Thank you for using Apple Support Communities.
Take care,
Sterling

Using HH 5 with ASUS RT-AC56U

Similar Messages

Maybe you are looking for