Using HsSetValue function in Hyperion SmartView

Hi All,
Can anyone help on How to use HSSetValue in SmartView ? If i've a data sheet with data and formulas, can i send the data back to Hyperion using HsSetValue ?
Thanks,
PVR

Data sources: Financial Management, Essbase, Planning; Hyperion Enterprise (private connection only)
HsSetValue sends a data value from a worksheet to a data source selected members of a dimension. To send data to a data source, you must have the appropriate load rule and write
access for the data source.
Syntax
Private connection:
HsSetValue (dollar amount,"PrivateConnectionName","POV")
Shared connection:
HsSetValue (dollar amount,"WSFN|ProviderType|Server|Application|Database","POV")
Refer Page 202 of http://docs.oracle.com/cd/E40248_01/epm.1112/smart_view_user.pdf
HTH -
Jasmine

Similar Messages

SAP BPC and Hyperion SmartView

Hello, Forum u2013
Encountering an issue when trying to use SAP BPC and Hyperion SmartView at the same time and just curious if anyone else is 1) using both programs at the same time and 2) if so, have you encountered any problems?
Here is the scenario:
I have a SAP template file (EvDRE) that is used in conjunction with Hyperion SmartView. The way it works is that the template would extract the numbers out of Hyperion and then send the base numbers to the SAP system.
In order to do this, however, I have to create the connection to the Hyperion database first, which I do using VBA code.
When I execute this code within a blank workbook, I am able to successfully create the connection to Hyperion with no problems.
When I execute the same code within my SAP template, I receive a MS Excel error (u201CExcel has encountered an error and must close programu2026u201D). This has been a consistent result that Iu2019ve received.
Please note that I am not logged into either SAP or Hyperion when I receive this error (this happens outside both systems). I'm worried that as soon as I log into both programs, the whole thing will crash...
So, just curious if anyone out there is encountering the same issue when trying to use both programs.
Please let me know.
Carlo

My suggestion is to attempt to break it into 2 seperate work flows for testing, using 2 seperate templates. One to pull, then copy the data to the second sheet for submission. I would assume that you would have to be connected to initiat eeither the extraction of sending of data using your added code, so seperating the 2 steps may prove useful.
Hope this helps.

Using hsgetvalue function to retrieve Hyperion Planning Data

Hi All,
Lots of discussion about hsgetvalue, but still I do not succeed in using this function. Maybe someone can help.
Is this function work for HFM or also Hyperion Planning? Currently we are using Hyperion Planning 11.1.1.3 with related Essbase. This is what we've tried in Excel:
=hsgetvalue(“";”Scenario#BudFin;Year#FY12;Period#Begbalance;Partner#NA_Partner;Product#A251;Account#BOM Weight;Version#Working;Misc#R-SBDA;Entity#No Entity;Currency#Qty") ===> the result is syntax error.
=hsgetvalue("","Scenario#BudFin","Year#FY12","Period#Begbalance","Partner#NA_partner","Product#A251","Account#BOM Weight","Version#Working","Entity#No Entity","Currency#Qty","Misc#R-SBDA") ===> the result is No Connection.
Actually I'm still confused about the Connection parameter, which connection name we have to use?
Thanks.
Gajah

Hi,
HsGetValue
Data sources: Financial Management, Hyperion Enterprise, Essbase
HsGetValue retrieves data from the data source for selected members of a dimension. When HsGetValue retrieves no data, the value specified for the #NoData/Missing Label replacement option is used.
When users select Refresh or Refresh All, only HsGetValue is called. When users select Submit, HsSetValue is called first, HsGetValue is then called only if HsSetValue returns successfully.
Syntax
HsGetValue(“Connection”,”POV”)
Connection parameters can have these values:
Empty: the default connection
HsActive: the active associated connection
The user-defined name for a private connection
You connect to data sources through shared or private connections.
_# Shared Connections_
Shared connections are stored in a central location and are available to multiple users through the Smart View Panel. You cannot add, edit, or rename shared connections, but you can save them as private connections, which you can edit and rename.
_# Private Connections_
Private connections are those that you create by saving a shared connection to your local computer or by entering a URL to a provider that is not configured for shared connections. When you create a private connection, it becomes the active connection.
Creating Private Connections
You can create a private connection from a connection that is not listed in Shared Connections if you know the URL.
To add a connection using a URL:
1. From the Smart View ribbon, click Panel.
2. From the Smart View panel, click the arrow next to "Home" Icon, and then select Private Connections.
3. In the text box, enter the URL or the local storage directory for the data source to which you want to connect. The URL syntax for the various data sources is as follows.
Financial Management: http(s)://servername:port/hfmofficeprovider/hfmofficeprovider.aspx
Hyperion Enterprise: http://servername:port/heofficeprovider/heofficeprovider.aspx
Planning: http(s)://servername:port/HyperionPlanning/SmartView
Essbase: http(s)://servername:port/aps/SmartView
Reporting and Analysis: http(s)://servername:port/raframework/browse/listxml
Financial Close Management: http://servername:port/fcc/servlets/smartview/fcmsvservlet
Oracle Hyperion Strategic Finance: http://servername:port/StrategicPlanning/SmartView
4. Click Next Button
5. Enter the Name of the connect as "Essbase_Conn"
6. Enter username, password and connect the worksheet.
Now you can create functions by two methods -
1. Using Function Builder
2. Manually (Which you have opted)
To create a function manually:*
1. In Excel, click the cell in which you want to enter the function.
2. Enter = (equal sign).
3. Enter the function name, HsGetValue, for example.
4 Enter parameters for the function,
HsGetValue(“Connection”,”POV”)
Connection parameters can have these values:
# Empty: the default connection
# HsActive: the active associated connection
# The user-defined name for a private connection
so the function looks like this:
HsGetValue(“Essbase_Conn”;"Year#Jan;Measures#Sales;Product#100;Market#East;Scenario#Actual")
5. To refresh the worksheet, from the Smart View menu, select Refresh. Functions are validated only when you refresh them.
REFERENCE: Chapter 2 & Chapter 15 of the SmartView Guide at http://docs.oracle.com/cd/E17236_01/epm.1112/sv_user.pdf
KosuruS
Edited by: KosuruS on Jul 12, 2012 9:55 AM

Using Multiple Functions with in members selection of Hyperion Financial St

Hello everyone, I am trying to retrieve all the level 0 entity members from a specific Level 3 entity member. Can I use multiple Functions with in Report studio to do this?? Or is creating an alt hierarcy my only option?
Thanks

You can try doing System Defined member list Lev 0 AND Descendants of Lv 3 member
JTS

FR Studio 11.1.1.3 : You're not authorized to use this function...

Hi,
we have FR Studio (client, v. 11.1.1.3.0238 and Report Server v. 11.1.1.3.0.0301) distributed on Citrix terminal server (windows 2003 32-bit) and on latest 2 prod servers we have this error "You're not authorized to use this function. Contact your administrator." appearing.
On QA server FR Studio works fine, we had an issue there when we forgot to set ports
8295-8299 to "listening mode" = they were not defined on FR server's FR_servp.properties config files.
This is also fixed on Prod FR servers and we have double checked firewalls are open.
After adding them to QA FR servers we had no issues with FR Studio on QA, but on PROD the issue still exists.
We have also checked that this shouldn' have anything to do with authentication.
Odd thing is that we get at least partially same sort of error messages on both working and non-working FRClient.log files.
On FRClient.log there are for example following records:
08-04 09:26:11 ERROR ConfigResourceBundle     Could not find fr_configcache.properties file
08-04 09:26:11 ERROR SerializableResourceBundle     Could not get registry instance
08-04 09:26:11 ERROR SerializableResourceBundle     java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
com.hyperion.hit.registry.exceptions.RegistryException: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:158)
     at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
     at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309).....
Caused by: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:151)
     ... 15 more
08-04 09:26:11 ERROR HRResourceBundleFactory     Could not locate registry
08-04 09:26:11 ERROR HRResourceBundleFactory     5500
com.hyperion.reporting.util.HyperionReportException: Server not yet configured. Please configure the server.
     at com.hyperion.reporting.config.ConfigResourceBundle.<init>(Unknown Source)
     at com.hyperion.reporting.config.ConfigResourceBundle.getInstance(Unknown Source)
     at com.hyperion.reporting.config.HRResourceBundleFactory.getConfigBundle(Unknown Source)...
That propably gives already an idea what FR Studio is logging.
Does anyone have idea about this .properties file for frconfig cache?
Should that be defined somehow during system configuration as we don't find that from any of our environments?
Just for additional info:
We have used following packages and installed HFM Admin Client, FR Studio and EPMA File Generator GUI.
•     02. installer - V17382-01.zip
•     03. foundation 1 of 4 - V17397-01.zip
•     03. foundation 2 of 4 - V17369-01.zip
•     04. architect - V17398-01.zip
•     08. financial reporting - V17378-01.zip
•     11. financial management - V17365-01.zip
Patches:
+ hfm_11113_50-p9976978_111130_WINNT.zip
+ financial reporting_11113_20-p9657652_11113_WINNT.zip
During the installation we selected:
Foundation \
Performance Management Architect\Performance Management Architect File Generator
Financial Management\
Financial Management Client
Financial ManagementADM Driver
Financial Reporting\
Financial Reporting Studio Client
I noticed that apparently no configuration was run neither in QA or in PROD, not sure though if FR Studio even requires that? HFM Admin Client does work on all environments Citrix servers.
But in Dev and LAB where FR Studio is working fine - FRClient logs absolutely no recods at all and there we did run configuration to tell which SQL db is on background.
Not sure though whether that config run has any significance for FR Studio.
Sorry for extremely long story, but just in case if anybody has faced similar issues and whether there could be something with Windows server settings I should go and check?
Btw... even adding this fr_configcache.properties manually (to try to highlight FR server name and port) it seems FR Client can't find the file.
Br, MJK

Denis,
Thank you for the prompt reply.
>
Denis Konovalov wrote:
> if those reports were saved with security - you're not goingt o be able to open them with Xi3.1 Deski.
Forgive me for my mundane question but what does saving with security mean?
Thanks

MS Excel 2010 takes long to open with Hyperion Smartview 11

Hi,
the MS Excel 2010 takes about 20 sec to open a blank sheet when is with a user without Internet access. It is automatically open with Internet access. This behaviour started after the installation of Hyperion Smartview.
Can you help?
Ant K.

I've never worked with Hyperion Smart view.
But it sounds like the program configured to access the internet and perform an operation, such as check for updates for that program. Since we know this issue may caused by the Hyperion Smart view. If it is an add-in for office, we can try
to disable it to check if excel can open blank worksheet normally, meanwhile, if you want to use this tool, you can enable it. File->options->add-in

SSIS connectivity to Oracle Hyperion Smartview

Hi
We are using Oracle Hyperion Smartview plugin in Microsoft excel to connect to Oracle Hyperion provider services.
How can I use Microsoft SSIS to connect to it?
Regards
Kaushik

Hi Kaushik,
You cannot unless you write your own connector using this plugin which is difficult.
See also threads like https://social.msdn.microsoft.com/Forums/sqlserver/en-US/95d8fbee-6f67-4ce9-a0fe-d5e510893f10/ssis-and-hyperion-essbase-
Please post here how you were able to connect.
Arthur
MyBlog
Twitter

Hyperion Smartview 9.3.1.5 performance issues

Hi All,
We have recently started using Hyperion Smartview 9.3.1.5 in our office and all users are facing following issues.
1) Whenever a workbook containing smartview form is saved and closed and then opened again then it takes lot of time to refresh.
2) It takes to long to update links in a workbook of a smartview form.
As far as first issue is concerned i investigated the issue and then wrote a excel macro to resolve this issue, which is as follows.
Sub Test ()
Application.Screenupdating = False
HypmenuVRefresh
Application.Screenupdating = True.
But there was no imporvement it was still taking too long to refresh.
and as far as 2nd issue is concerned i unable to find anything for it so far.
Please expedite.

Hi John,
I am using this application in my office and they have recently migrated to 9.3.1.5 version. Can you please suggest me any quick fix or solutions for the above mentioned issues. Please let me know if we can do something for this as i need to spend lot of time in the system for uploading numbers.
Regards,
Abhay

Can not use TOUCH function on Nokia 6600 slide

Can not use TOUCH function on Nokia 6600 slide-
turned on sensor in phone settings, but when i touch the PHONE it does not work.
Please, tell me how use this function or maybe my phone is out of order

As long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
(If you have missed calls or received new
messages, you must view them before you
can see the clock.)
Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
I hope this makes it clearer for you.
Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf

Can we use replace function in bursting control file?

Hi All,
Greetings!!!!!!!!!!
Have a doubt can we use sql functions like replace,nvl,decode.. in xml bursting control file.
Please let me know if there is a option.
awaiting reply...
Thanks
Rajesh

In Expression operator or in Filter, etc. you can type function name by hand.
Oleg

Can we use Evaluate function in Prompt

Hi all
Can we use Evaluate Function in Dashboard Prompt?
I need some exposure on how to use it.
I am working on a HRMS-OLTP Source where I need to work with Oracle Functions from OBIEE.
IF somebody can tell me that, It will be a favour for me....
ThanQ
Anand V

Hi All,
Here's an example of how to use evaluate. This use calls the Oracle TO_DATE function: EVALUATE('TO_DATE(%1,%2)' as DATE, '03/03/2009', 'MM/DD/YYYY')
Here's how it works: EVALUATE( '<FUNC>' AS <DATATYPE>, VALUE1,VALUE2,etc)
FUNC) Is the syntax for the function you are calling. Any parameters have to be replaced by %<number>, where number refers to the order in which you specify your parameters.
DATATYPE) The datatype that the function will evaluate to. In this case, DATE.
VALUE1) The latter part of the formula is a comma separated list of all the parameters used in the function. In this case, it's the date I want to cast
VALUE2) This is the second parameter. You need as many as you referenced in your function. In this case, it's the date format.
Good luck and if you found this post useful, please award points!
Best regards,
-Joe

Can we use Evaluate Function in Dashboard Prompt

Hi
Can anybody tell me
Can we use Evaluate Function in Dashboard Prompt.
If yes...How
Thanks in Adv

Yes ! You Can!
while creating the dashboard prompt, under "Show" pick SQL results and you write the SQL statement and include the EVALUATE function.
I have several such examples. Most of of dashboard pages are parameter driven.
1. 1st paratmeter - users specify the dates
2. 2nd parameter - constrains the results for the period specified in 1st paramter and my SQL for 2nd paramter looks like this -
SELECT table1.column1
FROM table, datedim1, table1,table2
WHERE datedim1.date BETWEEN EVALUATE( 'TO_DATE(%1,%2)','@{presentation variable1}','dd/mm/yyyy') AND EVALUATE('TO_DATE(%1,%2)', '@{presentation variable 2}','dd/mm/yyyy')
HTH
Mahesh

Can we use SOUNDEX function in OWB?

Hi
Can we use SOUNDEX function in OWB. If yes then how?
Regards
Vibhuti

In Expression operator or in Filter, etc. you can type function name by hand.
Oleg

Convert smartform output in to PDF using CONVERT_OTF function how to do it

Hi Anil , and Hi All
         I am trying to display smartforms output in java webdynpro
         for that i have got the following code in sdn.
           can anybody please clarify these doubts in the below code
           1) What are the mandatory input and output parameters
               I have to pass here in this code to my application
           2) please check my previous post also in this regards please
   . Please reply at the very earliest. Check the below code
Convert smartform output in to PDF using CONVERT_OTF function module and you can write pdf using parameter 'binfile' of this function in WebDynpro using the following code:
It is copied from my prg. I hope you understand it.
public void onActionGetQuote(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionGetQuote(ServerEvent)
wdThis.wdGetOppt_QwriterCustController().executeZquote_Writer_Input();
String fileName = wdContext.currentZquote_Writer_InputElement().getOrder().toString().trim() + System.currentTimeMillis() + ".pdf";
String pdfOutput = new String(wdContext.currentOutputElement().getBinfile());
if (pdfOutput != null)
try
String pdfResoucePath = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(), fileName);
FileOutputStream fileOutputStream = new FileOutputStream(new File(pdfResoucePath));
PrintStream ps = new PrintStream(fileOutputStream);
ps.print(pdfOutput);
ps.close();
//Display the PDF to the browser
String fileURL = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(), fileName);
IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(fileURL, "Pdf Browser", false);
window.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
window.removeWindowFeature(WDWindowFeature.MENU_BAR);
window.removeWindowFeature(WDWindowFeature.STATUS_BAR);
window.removeWindowFeature(WDWindowFeature.TOOL_BAR);
window.open();
// To collect all the file created in the server by user
quoteFiles.add(quoteFiles.size(), pdfResoucePath);
} catch (Exception e)
throw new WDRuntimeException(e);
//@@end

Hi
    ABAPers prepared a BAPI function module which calls Smart form , how can i execute it from java Webdynpro, so that I can display the smart form in Webdynpro. Pleas reply at the very earliest. Every answer will be rewarded.
regards
jalandhar

I want to use the Function Generator VI to send command signals through the NI 7344 motion controller. This will be a closed loop servo valve system. I want to be able to change from say a square wave to a sine wave on the fly. Idea's?

I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.

Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments

Using HsSetValue function in Hyperion SmartView

Similar Messages

Maybe you are looking for