Using HTTP adapter with no namespaces

Hi,
Is there anyway to use HTTP adapter when the provider does not accept the namespaces. The HTTP binding wizard requires a targetnamespace to be defined in the request and response xsds that we have to use.
Thanks & Regards
Siva

Bernd we are trying to do the same thing only with the soap adapter. I'm convinced that no one really knows how to do it. We can't even find an SAP CONSULTANT that has done it .. at any cost!
If you hear anything good .. please let me know - my email is [email protected]
I think the nightmare is coming in because when SAP bought the j2ee ( application server ) they never really have integrated it so it's very confusing if the settings need to be done on the ABAP side or the J2EE side via visual administrator. In addition most Basis guys are only experienced in the ABAP side and not the J2EE.

Similar Messages

XI message with Attachment using Http Adapter

Hi ,
We are using XI/PI 7.0 with Sp09 and Sender Application is SRM and Receiver is Ariba MarketPlace.
We are trying to Send PO with Attachments like Word, PDF etc from SRM to Ariba using Https adapter and from SRM we are using ABAP Proxy. When I did the testing with out any special config, I was able to send the attachments (I can see word doc as part of the payload-attachment) to XI from SRM but this attachment is not going through https adapter from XI to Ariba?
I have read some posts on this but I could not find the answer for my situation. One of the solution is that we can use SOAP adapter but we don't want to use Soap for some reasons.
Please give your thoughts.
Thanks in Advance.
-Laxman

> Thanks for your replies, I am little confused, based
> on your references http can't support attachments.
That is true.
> Also sap help link says Http adapter doesn't support
> attachments and XI adapter also doesn't support.
That is not true. XI adapter (in fact we do not talk of an adapter) supports attachments.
> It means Proxy also shouldn't support because proxy is
> nothing but XI adapter.
This is true, ABAP or Java Proxy are like XI adapter. Therefore it supports attachments.
> But When I send PO with attachments from SRM using
> Proxy connection I was able to pass through XI. So
> how proxy was able to send the attachments and this
> is contradicts to the help documentation.
The online help is wrong.
> We don't want to use SOAP because we are already
> using https adapter and this scenario is in
> production also if we go with SOAP then we have to
> re-import the digital certificate in Java Engine for
> SSL. Attachments are the new enhancement only.
I do not see another solution besides using SOAP adapter in so-called non-SOAP mode. Yes you have to reimport the certificates to J2EE stack.
Regards
Stefan

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

Can I get a response back when I use HTTP adapter

Hi ,
I am doing a integration between SAP and ThirdParty Product using PI 7.1.
The scenario is ThirdParty -> PI -> SAP ,using HTTP adapter between ThirdParty and PI , and IDoc adapter between SAP and PI.
So,its a HTTP sender and IDoc receiver.
So I was just curious to know if the IDoc posting failed in SAP ,can I send a response from SAP to Thirdparty regarding the failure along with some error message.
Thanks for your responses.
Venu

Hi,
It may lead to some timeout problems if you design your scenario as synchronous i.e sending response back to HTTP..
as SAP may take time to process idoc and need to provide response back to PI ..by that time the connection may become invalid and thirdparty may receive response as timeout error...
As anyway PI has the option of Alert managements..you can trigger the error mail to the third party recipients for letting them the status...
HTH
Rajesh

Scheduling of message using HTTP Adapter.

Hi All,
The scenario is SAP ECC to SAP PI to SAP MII, and we are using HTTP adapter on the receiver side.
The requirement is that, the messages should be sent to MII in the order in which ECC sends it to PI.
Can anyone please help me on how this can be achieved.
Thanks and Regards,
NehaSingh

Hi Neha,
If it is IDOC to HTTP scenario and you use EOIO also you will face a big problem.
It will not work. I have faced the same problem.
Suppose at a same time ECC genaretes 100 IDOC then then in intregration engine it may not reach at same sequecnce as IDOC no.
You can go with IDOC packageing in this case in ECC.
In ECC send the IDOCs as packages.
Also in PI create one Sender IDOC channel with package size.
then before your actual mappinng create a simple mapping program to sort the IDOC based on IDOC number. Then do the actual mapping.
Dont forget to create an Unbounded IDOC structure as source side in Mapping,
Edited by: Debashish on Jul 1, 2011 2:29 PM

Is it possible to use HTTP adapter?

Hi All,
interface will be trigged by ECC to run once a day. The purpose of this interface is to update ECC exchange rates with the exchange rates file provided by the Central Bank of Brazil.
The file is available in the web site: http://www. XXXX and its name changes depending on the date.
The format is YYYYMMDD.csv. Example: 20100419.csv
The scenario will be Abap proxy <-> PI <-> website (Http / soapu2026 whatever) (Syncronous as the date must be sent to build the correct filename).
My main question is: how can I pick up this csv file from the website? Is it possible to use HTTP adapter?
Thanks,
Satya Kumar

Hi ,
i am not sure about this,i wolukd prefer developing JAVA Proxy or File Adapter . try this code it read the data from website, try in you stand alone application,it is able to read or not.
you will face two problems,you have to convert CSC file to XML it is not possible in HTTP Adapter,
import java.lang.*;
import java.util.*;
import java.net.*;
import java.io.*;
class URL2AC
        public static void main(String args[]) {
       try {
          URL url = new URL("http://www.XXXXXXX.com/raj.txt");
          URLConnection uc = url.openConnection();
          BufferedReader in = new BufferedReader(new InputStreamReader(uc.getInputStream()));
          while (in.readLine()!=null)
               System.out.println(in.readLine());
       catch(Exception e) {
          e.printStackTrace();
Regards,
Raj

Problem with Send using JMS Adapter with Websphere MQ

Hi,
We have two scenarios using JMS Adapter with MQ:
1. File->PI->MQ
This works fine and drop the file in MQ correctly.
2. MQ->PI->File
This gives an error reading from the queue: (see highlighted in the log below). It correctly connects to the queue name. But it fails with the message "Could not begin a AF transaction".
Our PI version is 7.0 SP 13
Websphere MQ Version 6.0.
Any idea what could be wrong?
Cluster Node Administration Information Availability Times
Cluster Node Details for Channel CC_JMS_MQ_Sender
Short Log
In the Last 4 Hours Server 0 15_92786
_Sucessfully connected to destination 'queue:///MMPP.PLM.FGH41? CCSID=37&targetClient=1'_
Line 1 / 1
Processing Details for Cluster Node Server 0 15_92786
Type
Time Stamp
Message ID
Explanation
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d Error while processing message '2e6206f0-7925-11dd-bc02-0003bae50b4d'; _detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Could not begin a AF transaction: TxManagerException: Unable to open transaction: com.sap.engine.services.ts.exceptions.BaseSystemException at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:103) ..._
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d XI message ID corresponding to JMS message with ID 'ID:414d512071736431202020202020202047d9462024028b02' will be created as a new GUID with value '2e6206f0-7925-11dd-bc02-0003bae50b4d'
Amith Dharmasiri

Checked the drivers installed in :
/usr/sap/<SID>/DVEBMGS<SYSNO>
/j2ee/cluster/server0/bin/ext/com.sap
.aii.af.jmsproviderlib
They are available and properly added to aii_af_jmsproviderlib.sda.
The drivers are:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
These were installed per OSS note 747601.
Any other suggestions, why retrieving from MQ doesn't work?

3rd party to sap using HTTP adapter

Hi Folks,
I'm sending some IDOC to sap from the 3rd party. I have to use HTTP adapter as sender and IDOC as receiver adapter.
Can you please suggest me how to configure teh sender side. As I know there will be no such configuration for the sender adapter as it is HTTP then how the HTTP adapter will get the data sent by the 3rd party and how it will pass it on to the idoc adapter ?
Regards....

If you like to have more details about the http url
then refer the below link
http://help.sap.com/saphelp_nw70/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
Rajesh

HTTP Adapter with dynamic URL

Hi all
Could you please to help. I need to use receiver with HTTP adapter which in this adapter that I need to pass dynamic URL into this. I had try follow this document
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
but when I test it I got this error
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER"><b>ATTRIBUTE_MISSING_URL</b></SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Dynamic Header - Missing Message Attributes: URL/HTTP Destination</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I think my XML source message format that is incorrect. This is my XML source message
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_OB xmlns:ns0="http://xxxx.com:db6">
   <type>
      <TargetURL>http://xx.xx.xx.xx</TargetURL>
   </type>
</ns0:MT_OB>
Could you please to suggest.
Thanks
Park

Hi,
Use the UDF in mapping to create the dynamic URL.
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", <b>XXXXX</b>);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
See the belowlinks
dynamic URL - adapter specific properties (http receiver adapter)
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards
Chilla

Req/Reply message using HTTP adapter

I am using a HTTP Adapter to receive a request message from a client application and sending a response back to the client. The response is being sent by the adapter is XML with a HTML wrapper. However, the client application can't accept HTML; we have to send pure XML.
Is there any easy way to change this in adapter.ini? Can we do something using ReceiverCustomizer? or we have to do something in the TransportServlet?
-----------------------------------------Current Response message-------------------------
<html><head><title>TransportServlet </title></head>
<body><h1>TransportServlet</h1>
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<ns1:response userId=""
xmlns:ns1="http://quikpayasp.com/namespace/activity">
<account type="StanfordCardPlan">
<currentBalance></currentBalance>
<accountActivityDate></accountActivityDate>
</account>
</ns1:response>
</body></html>
--------------------Expected----------------------------------------------
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<ns1:response userId=""
xmlns:ns1="http://quikpayasp.com/namespace/activity">
<account type="StanfordCardPlan">
<currentBalance></currentBalance>
<accountActivityDate></accountActivityDate>
</account>
</ns1:response>
Appreciate your response.

Try using D3L mode.
babu

Using JMS adapter with J2ee native queuing system

Hi there,
As far as I have understood J2EE contains it's own native queuing system (JMS). Since the J2EE is part of the WAS, shouldn't it be possible to somehow use XI's JMS adapter in conjunction with this native JMS?
I've tried to search many places in many ways, but haven't been able to find any info. Is it possible at all?
Hope, some of u guys can help out there:-)
Regards,
Daniel

Hi Keith,
It looks as if you are in the same situation.
We have this working very nicely now and I'm happy to share. In fact I was just granted wiki permissions so I can add the information there along with screen shots.
Informaiton on this configuration is very scattered but I imagine many people would find it useful for integrating with Mainframes without adding any complexity to the legacy environment. Let me come back to you with some more inormation, but for now you can get started with this:
Insert a module as the 3rd line in your Module Processing Sequence to use AF_Modules/MessageTransformBean and give it a key in order to associate with the parameters you will need to type in below. These parameters are very similar to normal XI File adapter parameters.
SAP Note 793922 has more info on the parameters... not the greatest reference I know.
Also this has some info...
http://help.sap.com/saphelp_nw04/Helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm
I'll try and get some screen shots up on the Wiki.

Logon Problem in to third party HTTP Server using HTTP Adapter

Hi All,
I am trying to use a receiver HTTP Adapter to communicate to third party asp based Webserver.
The Server expects the content type as application/x-www-form-urlencoded.
So, in the HTTP receiver communication channel I gave content type as application/x-www-form-urlencoded. The Problem is that now we are getting logon error message from the application though we use the correct user and password provided by them.
They have given us a HTTP test tool which is perfectly working with the user ad password used in PI HTTP Adapter receiver channel.
kindly share your thoughts on this issue.
Thanks in advance.
Regards,
Sudharshan N A

Satish,
I have used Non-SAP logon only..
I doubt that the problem may be due to some encoding issue.. since the webserver expects a different Content type (application/x-www-form-urlencoded).
I donno if my doubt is logical
thanks.
Regards,
Sudharshan N A

Accessing Java webservice (XML over http) via WCF or HTTP adapter with content-type and authorization HTTP headers with POST method

Hi Team,
I need to access Java web service which is simple service and accepts and returns XML over HTTP. No credentials are needed to access the service. We need to pass following two HTTP headers (Content-Type and Authorization) along with XML request message:
<GetStatus> message is being constructed in the orchestration and URI is constant to access.
Which adapter shall I use to get the response back? I tried using WCF-WSHttp with Security Mode = Transport, and different options of client credential types but every time, error returned stating:
System.Net.WebException:
The HTTP request is unauthorized with client authentication scheme 'Basic'. The
authentication header received from the server was 'Basic realm='.
Authentication failed for principal Basic. Message payload is of type:
String
In Fiddler, request looks line following
POST <https://URL/GetServiceReopnse HTTP/1.1
Content-Type: application/xml
Authorization: Basic cmVmU3RhdHN2Y19kgeRfsdfs=
Host: <Server name>
<GetStatus XMLNS="http://server.com/.....">
<OrgId>232323</OrgId>
<HubId>3232342323</HubId>
</GetStatus>
MMK-007

First, you should not use the HTTP Adapter because it's been deprecated and replaced by WCF.
Start with the WCF-Custom Adapter and select the customBinding.
You should start with the textMessageEncoder and httpTransport and go from there.

Using converter/adapter with macbook extension cord'

I'm taking my macbook to the u.k. and want to know if i can use just an adapter with the magsafe extension cord. I already have an adapter for the the magsafe cord but may need to use the extension cord as well.

Yes you can just use a plug adapter. It will work fine either way.

RE: Rollback while using DB Adapter with toplink

Hi All,
I am using DB Adapter's Toplink to insert data in ms-sql table.
In case, If I am inserting 10 records and suppose after 6 record insertion is being failed.
Then in above scenario, Is previously inserted records would be roll backed or not?
Is there any thing, we need to do in BPEL or this would be taken care by Top link.
My version of BPEL: 10.1.3.4.0
Thanks in advance.
Regards

Hi Pavan,
Thanks for your response. My process is Asysc. I did one poc, tested if a data of one record is wrong, then it throwing error, and data is not being inserted in data base.
I tested with 4 records, if data of any records is wrong, then it is not being inserted.
Is there any other good way to handle this.
Regards
Edited by: vikky123 on Sep 22, 2010 8:43 PM

Using HTTP adapter with no namespaces

Similar Messages

Maybe you are looking for