Using Huey Pro with iMac

Good afternoon,
About a year ago I had asked if anyone had been able to calibrate an iMac i5 with a Huey Pro? Ian Lyons was kind enough to answer suggesting installing Rosetta. As a result, I did that and d/l the latest Pantone drivers many times over but to this day the sensor is still not recognized and I am using the Mac internal calibration.
Since a year has passed and the iMacs are more ubiquitous, my question is different: Has anyone actually had success using a Huey Pro with the iMac?
Thanks much, Andy

Andy, this really isn't a Lightroom question, and if you're lucky someone may chime in. Still, you might be better off checking for newer versions of the software. e.g. http://www.pantone.com/pages/pantone/Pantone.aspx?pg=19567&ca=12#login also check out http://www.northlight-images.co.uk/reviews/pantone_huey_pro.html

Similar Messages

How can i copy files from one external hard disk to another using macbook pro with retina display

How can i copy files from one external hard drive to another using macbook pro with retina display?

That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton

I bought a used macbook pro with 10.9.5 but it didn't start up clean. There are a lot of programs etc. How do I know if it's ok to use?

I have a macbook pro that I want to give to my son for school. I just purchased a newer (used) macbook pro with more HD and memory to replace the one I use for work. I need to set up the new book and transfer all my stuff over, then clean the older one up for my Son. I'm concerned because the newer book I purchased on ebay. It didn't start up a if it were a clean machine. I turned it on and it is full of lots of programs and I'm worried the previous owners files and information are on the computer. They both have the OS X 10.9.5 (13F34) software.   I updated to the new iLife on the older one, the newer one has 09. I would appreciate the steps I should take. I have everything backed up on the older book through drop box and cloud, so I'm ready.   Also the seller told me the computer would have Mavericks already installed, but I don't see it.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SB

What format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?

Using Logic Pro with Reason 3.0

I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's.
When I start logic first and the reason I am not hearing any sound from reason. I can see the meters move in the mixer of reason but I hear nothing.
From the standard documentation that comes with Logic all I can figure out is that rewire is there to sync any other rewire program so that can run side by side of one sequences transport controls.
I want to be able to hear audio from both my arrangement in Logic and in Reason at the same time in the same song in sync.
Can someone please tell me firstly if this is possible and if so how can I implement this kind of setup.
Thanks in Advance.
amerretz

Common problem. LP doesn't rewire 'out of the box'.
There are two ways to do this (well, more, but I'll tell you 2)
1 (Easy Way):
Restart Mac (Just to be sure things are sorted, not everytime)
Launch Logic
Launch Reason
Arrange Window
Choose a Channel> Pan Left
Go to the Middle section of the Parameters on the Left
With the Channel pop up menu, select Rewire> RWMix L
Repeat for the Right and away you go.
2 (More Advanced)
Environment Window
In the Middle section of the parameters on the Left select Create
Name it Rewire
Under that windows "New" pull down (Top Left), pull down to Audio Object
In the "Channel" pop up (Left, bottom section) select>Rewire (Left, right, 3,4... What ever you want.
Double Click the Audio Object to expand it
Pan Left or right, or whatever you need.
Rename if you wish
Do the same for the other stereo sideNow's the fun part. Assign these stereo pairs to a bus (above the fader, the default is "Out 1-2")
Go to the Mixer window
Double click the Bus you assigned, this puts it in the arrange window
Arrange window
Name the Bus "Rewire" or "ReDrum" or something great like that.
Now you can use it like a stereo pair (which I wish Logic had) for automation and effects and such.

I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?

I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?

stefani88 wrote: It seems from other discussions my current OS on my laptop is the reason why it won't sync but people running older versions of windows aren't having a problem. So I don't get it.
Oh. Gosh. What's Windows got to do with anything? You're on Leopard, on a Mac.
It seems from other discussions my current OS on my laptop is the reason why it won't sync

Hello I use Mac pro with OSX 10.9.9 I am trying to download flash player but I keep getting this "Install Adobe Flashplayer" is Damaged and can't be opened anyone got any ideas please

Hello I use a macbook pro with OSX 10.9.5. I am trying to download Flash player but keep getting this message "Install Adobe Flashplayer" is damaged and can't be opened.You should eject the disk image.Any ideas please?

You should make sure you do a complete uninstall of the flash player first and then install the latest FP14 version from this link - Use http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g
In order to do a complete uninstall - Uninstall Flash Player | Mac OS

I use MB pro with Lion OSX 10.7.5 and Now I have bought MB Air with Mountain Lion,Can I transfer my MB Pro stuff running Lion to MB air running Mountain Lion or do I need to buy Mountain Lion for my Pro to create a backup and then transfer ,thnx

I use MB pro running Lion OSX 10.7.5 and Now I have bought MB Air with Mountain Lion,Can I transfer my MB Pro stuff running Lion to MB air running Mountain Lion or do I need to buy Mountain Lion for my Pro and create a backup and then transfer ,Although I want Mountain Lion for my MB Pro but can I use the one from MB Air,thnx?

Hello,
If you just do a normal time machine backup on your macbook pro and then plug that harddrive into your new air; you should be able to just use migration assistant to transfer all your files. You wouldnt need to upgrade to mountain lion on your macbook pro.
Hope it helps,
Ryan

Got used MacBook Pro with

I had got used macbook pro 2011 ... but system preferences is not working , I'd tried to reinstall the OS using the internet recovery but I got message that my id does not had os x lion purchased ...
how I can fix the system preferences "
how I can add this MacBook to my ID?
please need help !!!

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1a. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
1b. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
2. Partition and install OS X
If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
3. Other issues
If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Using UPS units with iMac G5 (iSight)

I just bought an APC RS 800 VA UPS for my iMac and now find that it might not be a good idea. There is a post on Macintouch about a report from APC tech saying that the cheaper units are not compatible with iMacs because of the squarewave (vs sinewave) output. If it goes on battery power, it could damage the iMac power supply.
Very strange, because they have the iMac listed on the box the unit shipped in as being ideal for use with this UPS!
Has anyone used the less expensive UPS units with the iMac G5 successfully? Have you had it run on battery power with no noise (hum or buzz) or other anomalies?
Griff

I do not have a UPS from APC, but a generic one from Best Buy which looks like a unit made by CyberPower. It has kicked in several times without any humming or buzzing at all.

Issue using logic pro with bfd 2.0 - not enough RAM?

Right, I posted a little while ago when I first installed BFD 2 on my mac pro, and was having problems whenever I tried to use any effects (either in Logic itself or in the BFD 2 program) whilst using BFD 2. What I think I forgot to mention was I was trying to do different processing on different "areas" of the drum kit, and I wanted to use the Logic effects, so I had a number of tracks with BFD 2 loaded as the instrument.
Well, I phoned a local Apple-certified shop to ask for advice on this, as nothing I'd tried had fixed the issue. The guy suggested I try a clean install of the OS and Logic and BFD 2, to see if that fixed the issue. I* have done this, and logic now works with BFD 2 and effects when I have just one BFD 2 tracks, but as soon as I add another and program some MIDI notes into the 2nd instance, even just a bar or two, then play the whole song, there is a large amount of digital noise. Now, on my mac pro, i only have one HDD - the system disk - and 4 gb ram. I had just now come to the conclusion that, with the minimum spec for Logic being 1GB, and for BFD 2 being 1GB, with the OS running as well it's actually likely the system is short of RAM. But now I see that it can also be an issue if your Logic project is stored on your system disk.
So I'm thinking of getting both an extra, internal (SATA) HDD, and an extra 8GB RAM at least. Is this likely to solve the issue? I'm not currently using an interface with it, and as I say, with just one BFD 2 track, it's fine, the issue is caused when I try to add more BFD 2 tracks. Obviously, without an interface, I am unable to try recording audio to see if there is an issue with that too.

You also need to upgrade to the latest version of BFD2. There were many fixes. You should also install BFD2 samples on another hard drive. The 4 gigs of memory you have is more than enough. Your main problem is probably not installing the samples of a separate drive. Hope this helps. BFD2 is an incredible program once you have it set up properly. As noted previously switching from 24 bit to 16 bits will help also.

New to MAC - trying to sync iphone and Mac Pro with imac

Hi,
Just made the switch to Mac. Purchased my Mac Pro yesterday, loaded .Mac, and plugged in my iPhone to the computer. Followed the steps to Sync iCal and contacts from iPhone and although it is registering there is a phone and downloading photos, it is not syncing anything else.
The steps I took were System Preferences, .mac, and checked the relevant boxes. It indicates syncing is taking place but the calendar on iPhone and Mac Pro are not syncing.
Could anyone help with advice? SHould I be able to sync easily between the iPhone and the Mac Pro with .mac?

You use iTunes to sync an iPhone - not *.Mac Sync* or iSync.
*.Mac Sync* is for syncing between Macs, and iSync is for syncing third-party mobile phones and PDAs.
The iPhone specific forums are here:
http://discussions.apple.com/category.jspa?categoryID=201

Can I use Filemaker pro with Thunderbird to send emails

I use Filemaker Pro 11 for my database which is a list of names and addresses. I currently use Microsoft Outloook to send Emails. I have ten mailboxes on Network Solutions. They let me send 100 emails at a time, for each box for a maximum of 1000 per hour.

No. mail merging is done with an add-on and it does not use filemaker.
https://addons.mozilla.org/en-US/thunderbird/addon/mail-merge/?src=ss

Errors Using AJA IO LA & Final Cut Pro with iMac

Has anyone experienced difficulties getting analog video through an AJA IO LA into an iMac? Control panel on AJA reads no video in or out & when Final Cut is launched I keep getting the following error message: "Unable to open specified video output device, may be in use by other applications, incorrectly connected or may be conflicting with a sound input device." If I continue into Final Cut, I am unable to capture and also have received the following error message: "An Error occurred while configuring QuickTime using the current capture preset. Please quit Final Cut Pro and check your hardware configuration"

I have no experience with the product you are using, but after looking at their website and the system requirements, it occurred to me that they only mention Power PCs and OS X Panther or later. So the problem might be that their hardware/software is not compatible with Snow Leopard, which included major changes. Have you tried contacting them to ask if your particular model is compatible with an Intel Mac and 10.6?

Using Huey Pro with iMac

Similar Messages

Maybe you are looking for