Using [ICP None], [ICP Top] and [ICP Entities]

Dear Experts,
I'm a newcomer in HFM application and I have a confusion on how to use ICP Dimension wrote in title above. As what I know, system will use [ICP Entities] or [ICP None] based on plug account settings. When Plug Account settings for IsICP = Y, then system will store elimination result based on each entity (data can be view in each children of [ICP Entities]. While when Plug Account settings for IsICP = N, then system will store elimination result in [ICP None].
For data input, is there any suggestion or best practice to input/load data only in [ICP None] or should I put data in specific entity under [ICP Entities] ? What is the plus and minus of it ? Also, i tried to find about [ICP Top] but couldn't find an exact answer on how to use it.
Appreciate any help for my questions.
Thanks,
- Anna

Dear Jai,
Thanks for your reply.
I'm clear enough for data entry that should be loaded to [ICP None], while elimination can happen either in [ICP None] or [ICP Entities]. I am aware too that [ICP Top] can consist of both number from [ICP None] and [ICP Entities].
In that case, when i load/input an intercompany transaction, can i load it into [ICP None] or [ICP Entities], regardless i set my PlugAccount to Y means elimination will be done in [ICP Entities] level ?
Appreciate for your kind reply.
--Anna

Similar Messages

My brother used a non apple charger and it disabled his iPod touch 5th generation what do I do

my brother used a non apple charger and it disabled his ipod for over 40 years what do I do?

Either wait which is not practical or
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT4623 I have recently up-dated and I have lost some of my contacts I have used the same Lap-top and pluged phone in

need help i pluged my I phone 5 into my lap top and only some of my contacts can be veiwed carl

Warranty service on the iPhone is only valid in the country of purchase. Note that the EU is considered one country for warranty purposes.

Can Jdeveloper Be Used For Non-Oracle Databases

I have been trying to evaluate Jdeveloper 9i and Jbuilder 7 Enterprise for Swing database development. I am particularly interested in the productivity enhancements such as BC4J and Jclient. The underlying database might be Oracle, SapDb (excellent, easy to use, and free), SQLServer, etc.
I evaluated Jbuilder Enterprise tools and it worked flawlessly with SapDb. This emphasized using their DataExpress and DbSwing components which provide many useful capabilities similar to BC4j and Jclient. It also involved using their DBPilot tool which allows browsing similar to that provided via a Jdeveloper connection.
I tried to use Jdeveloper for the same SapDB and it is essentially non-functional. I followed the instructions for using a non-default driver and tried to define a connection. It behaved inconsistently: often saying no suitable driver can be found and yet when you edit the connection and test without making any changes, it works. If you try to establish a BC4J definition, it is very inconsistent and fails to recognize important details as foreign keys. Even if you define a ViewLink manually, it still does not work properly if you attempt to define a Master-Detail Jclient form. As I have stated, all these types of capabilities worked flawlessly in their Jbuilder equivalent. Furthermore, I really like the fact that Jbuilder gives many of BC4Js benefits without needing a BC4J J2EE container.
Has anyone had real success using Jdeveloper's advanced features to develop for non-Oracle databases and if so, how did you get around these types of problems?

Hi,
generally, SCAN can be used for 10g databases and you discovered the first half: for 10g databases you will have to modify the REMOTE_LISTENER entry for each 10g database instance to point to the SCAN listeners (as opposed to pointing to the remote local listeners, which is the default in 10g). You could even have the databases registers themselves with SCAN and the remote listeners, if you wanted to... It's more or less a matter of configuration. But for simplification reasons, I will stick to the case where you have your 10g databases register with the SCAN listeners only.
Now the other half is the client and the client configuration. An 11g Rel. 2 client configured for RAC would have a TNSNAMES entry that has only one address line for the RAC databases. The host entry in this one address line should point to the SCAN (the SCAN name is ideally resolved in DNS). A 10g client configured for RAC would have as many address lines in the TNSNAMES as you have nodes in the cluster.
The 10g client SCAN configuration would then be in the middle so to speak: You would have 3 address lines in your TNSNAMES, in which each host entry would resolve to one SCAN address (I assume you will use the recommended default of 3 SCAN IPs). If you choose, you can have a name resolution for each of your SCAN IPs, but this would not be required. Now, why would you do it this way? Because this configuration will always work and does not make you dependent on certain functionality that your DNS server may or may not offer.
For the remaining questions: SCAN is a DNS entry resolving one name to more than one (typically 3) IP addresses. OID is short for Oracle Internet Directory, which is a complete LDAP server. And you are right that there is no document how to configure 10g clients for SCAN from Oracle yet. However, there is a quite good document on SCAN on otn.oracle.com/rac, but I am sure you are aware of it already.
Hope that helps. Thanks,
Markus

Can I use a non-sinewave inverter to power my macbook

Some power supplies can not tolerate the output of inverters that are not sine wave. I don't want to experiment using my non- sinewave inverter and find out that the Magsaf power adapter smokes.

You should use your serial number to lookup the Technical Specifications for your MAC. The current MB specs are:
Electrical and operating requirements
Line voltage: 100V to 240V AC
Frequency: 50Hz to 60Hz
Operating temperature: 50° to 95° F (10° to 35° C)
Storage temperature: -13° to 113° F (-24° to 45° C)
Relative humidity: 0% to 90% noncondensing
Maximum operating altitude: 10,000 feet
Maximum storage altitude: 15,000 feet
Maximum shipping altitude: 35,000 feet
You can go ahead and test it on the inverter. The voltages produced by the inverter - whether a proper sine-wave or a chopped square-wave - are safe for your adapter.
What you need to test is that the adapter does not "need" an accurate clock signal. It is common for desktop computers in North America to use the 60-hz sine-wave for a timebase in the DC output regulator.
Square waves don't have the same zero-cross timing as a sine-wave, so the output voltage would not work with anything but a true sine-wave inverter.
I doubt your adapter will care since I have yet to see any laptop or portable with an external p/s that does.
Pop out your battery, and see if you can boot from the adapter on the inverter. If you can, then your good to go!
Let me know how it works out.

Standard and Non-standard exports and queries issue

Hi,
We have created a few STANDARD books with standard exports in them. The standard exports use standard queries.
The ISSUE is that in the Verifications/Filters tab, where we have put in a lot of queries - ONLY the STANDARD queries show up. We would like to have all the queries show up. I am the adminsitrator and still only the standard ones show up.
I am worried that if I "Save As" the export as a non-standard export, it does not allow me to uncheck the standard tick column and save it but I have to manually change the name of the export. Can we change this in anyway?
Is there a system preference where I can allow all the queries to show up in the verifications/filter tab at least for the admnistrators if not for all? Thanks
- Ad

Thanks for your input but DRM does seem to be behaving what you said or may be I am still missing something here.
I created a standard query.
I have a standard export.
Now, in the verification/filter tab of my Standard export, I am able to see my standard queries.
But,
I am unable to see the Non-Standard Queries.
HOWEVER,
If I have a Non-Standard export --> I am able to ALL the queries. This makes it a lot more flexible in doing things.
My question is the WHY are my standard exports not able to reach the non-standard queries. What I wanted to do a twist in my export for analysis purposes for a particular use. If non-standard exports have access to Standard and Non-Standard queries --> it just makes more sense to always use a non-standard export and create non-standard queries.

Is it safe to use a non-Apple charger?

I ordered a non-Apple charger and asked the seller if there was any risks and he told me no because the debit is the good one (not sure what it is, maybe he was talking about the volts?) and it is certified CE. So is it okay?

Not sure if you would consider it a risk, but there have been deaths associated with the use of non-Apple chargers and devices. That is what has lead Apple to make the statement, and also to work at making it difficult for non-Apple chargers, or non-certified cables from working on Apple devices.

Using a non-mac powersupply?

Hey there, I recently purchased a powermac G4 but it turns out it has a bad power supply. I can't read any of the print on the old supply anymore, and I have a bunch of pc supply's sitting around so I was wondering if it is possible to use a non mac powersupply, and if so what wattage I need

To ID your G4, take a look at the following:
http://docs.info.apple.com/article.html?artnum=58418
http://docs.info.apple.com/article.html?artnum=42739
For wiring mods to an ATX PSU for a Sawtooth, take a look at the instructions here:
http://www.xlr8yourmac.com/systems/ATXG4_AGP_conversion/G4_AGP_to_ATX_casepg2.htm#next
and here:
http://www.outofspec.com/frankenmac/wire.shtml
The OutofSpec site also has instructions and pinouts for non Sawtooth models.
As far as wattage goes, a good quality 300+ watt PSU will be plenty, and provide power for expanding the system later on. Put in 400 watts if you think about adding SATA drives with a controller card. You will easily be able (depending on model) to run up to 4 hard drives (internal), upgraded graphics card with fan, upgraded CPU with fan, and 2 optical drives.
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

My family uses a single lap-top as our main internet connection and when we synch our respective I-pods, our I-tunes account seems to wipe-out our playlists, even though we have tried to create separate I-tune accounts. Help!!

My family uses a single lap-top as our home computer and several of us have i-pods that we like to synch, using I-tunes. Although we've tried to create separate I-tune accounts, our i-tunes playlists are getting wiped out when one of us deletes songs on our I-pod and it seems as though I-tunes is not distinguishing our distinct accounts and all i-pods are being synched to reflect the latest i-pod anyone makes on their respective account. It appears as though our distinct I-tune accounts are not being loaded on our lap-top when we sign in and unfortunately, when we're in I-tunes, there is nothing to indicate what account is on the screen. For all the glowing appraisals apple-related products usually receive, we are finding i-tunes and its interface with our respective i-pods to be a very, very frustrating experience.
Can anyone shed some light on this for a family of non-techies? Thx
Pegger64

You need to create separate Windows user accounts if you want to seperate the behaviour of iTunes for each user. That also means separate iTunes libraries for each user.
Windows is a multi-user operating system but you are not using it properly. iTunes is not a multi-user application. No application is. You can't expect it to treat different users differently when they are all using the same computer user account.
Do you understand what I mean?

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

Hi Nealeh
Thanks i think I got it working of a fashion.
Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
The scenario is:- say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
Had she had a normal skimpy bikini on, no problem!
If i don't solve it, she will get fired!
Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
"Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
I have Safari on this iPad. Guess that is all it runs.
So technology is not my friend today!

What is RID in non clustered index and its use

Hi All,
I need help regarding following articles on sql server
1) what is RID in non clustered index and its use.
2) What is Physical and virtual address space. Difference in 32 bit vs 64 bit Virtual address space
Regards
Rahul

Next time Please ask single question in a thread you will get better response.
1. RID is location of heap. When you create Non clustered index on heap and
lookup happens to get extra records RID is used to locate the records. RID is basically Row ID. This is basic definition for you. Please read
this Thread for more details
2. I have not heard of Physical address space. I Know Virtual address space( VAS)
VAS is simple terms is amount of memory( virtual ) 'visible' to a process, a process can be SQL Server process or windows process. It theoretically depends on architecture of Operating System. 32 bit OS will have maximum range of 4 G VAS, it's calculated
like a process ruining on 32 bit system can address max up to 2^32 locations ( which is equivalent to 4 G). Similarly for 64 bit max VAS will be 2^64 which is theoretically infinite. To make things feasible maximum VAS for 64 bit system is kept to 8 TB. Now
VAS acts as layer of abstraction an intermediate .Instead of all request directly mapping to physical memory it first maps to VAS and then mapped to physical memory so that it can manage request for memory in more coordinated fashion than allowing process
to do it ,if not it will soon cause memory crunch.Any process when created on windows will see virtual memory according to its VAS limit.
Please read
This Article for detailed information
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Printer is overprinting old jobs on top of new jobs. Using a Mac with OSx and a HP photosmart for over a year. this just started happening.

Printer is overprinting old jobs on top of new jobs. Using a Mac with OSx and a HP photosmart for over a year. this just started happening.

RReset printing system again and the restart in Safe Mode . This will clear some caches,to do this hold down the Shift key when you hear the startup tone until a progress bar appears, after it has fully booted restart normally and add the printer.

HT1414 how do i syn with my apple computer i had purchased it in dec and i use a lap top and the name is there it won,t let me

we bought this new air mini pad i used a very old lap top now i trying to get it to work on my apple desk top and it wants the other i so fustrated our son tryed no luck and i am trying for hours nothing on the air works only the mail and face book i not conected to i tunes even thought i keep putting in my info

Are you using version 11.x of iTunes on your computers?
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I had an Apple account on my old Lap Top to which my iPad and iPhone were syncd. I now have a new Lap Top and when I tried to access my apple ID on it I was asked to sign up for a new account. I can't use any of them.

I need help. I had an apple account on my old Lap Top to which my iPad and iPhone were synced ? I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did. After doing this I tried to sync my iPad and phone to the new lap top which I was unable to do as they didn't recognise my new ID. HELP!!!!!! 

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Using [ICP None], [ICP Top] and [ICP Entities]

Similar Messages

Maybe you are looking for