Using iDVD Media in FCE HD

I've shot a number of videos in FCE HD in various formats and created an iDVD for each. My original tape and materials related to these videos are long gone. How can I new take a DVD created in iDVD and convert it so it is usable in FCE HD without rendering? Thanks for your help.

You can convert the DVD video back to QuickTime for editing in FCE (or even iMovie, for that matter).
You will need MPEG Streamclip (free) + QuickTime MPEG2 Playback Component ($19.99, Apple Online Store). You need both. This is the easiest way to convert the video and it will yield the highest quality.
- If your videos are 4:3 aspect ratio, I suggest converting to QuickTime/Apple DV-DVCPRO NTSC (assuming you are in North America, if you are in Europe, then convert to QT/Apple DV-PAL)
- If your videos are 16:9 aspect ratio, I suggest converting to QuickTime/Apple Intermediate Codec
In FCE, make sure to select a corresponding Easy Setup and create a new Sequence before importing the converted video files. If you do the conversion properly and set FCE accordingly, you won't have any rendering issues.

Similar Messages

Is there any way to get around having to use iDVD to burn DVD?

Is there any way to get around having to use iDVD to export FCE to DVD?
I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
Chuck
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)

If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

I am currently experiencing problems burning a DVD using iDVD. I have created a project in iMovie. I have shared it to media successfully however when I try to burn it I receive a messaging advising there is insufficient disk space on assets.

I have created a iMovie and wish to burn it to a DVD.
I successfully shared media to browser in preparation to burn to DVD using iDVD magic.
I am able to successfully preview however when I try to burn I receive a error indicating "Not enough disk space on assets"
I am currently using a Macbook Air
Version 10.6.8
Model Name:          MacBook Air
Model Identifier:          MacBookAir3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBA31.0061.B01
SMC Version (system):          1.67f10
Serial Number (system):          C02DRL8JDDQX
Hardware UUID:          53310599-83EA-5F58-99A9-AE505506BBFE
Capacity 60.32 GB
Available - 2.49 GB
The iMovie I am trying to burn is 45 mins long
Any suggestions would be greatly appreciated...

Reduce your burn speed to 1/2 the Rating of the Media.
Disc Burner
If more than one supported disc burner is connected to your computer, choose one from the menu.
Preferred Speed
When you burn a CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Disc Format
Choose the type of disc you want to burn: Audio CD; MP3 CD; or Data CD or DVD.
Gap Between Songs
Choose the amount of silence, if any, between songs.
Use Sound Check
To have all songs on the disc play at the same volume, select this option.
Include CD Text
To include information that CD players in some vehicles can display, select this option.

How can I burn a DVD of an iMovie 13 project using iDVD 7.1.2 version.

I have a late model iMac which came with iDVD. I use iMovie to make photo and movie projects and share them to iDVD to burn DVDs. I use these often and I love them, specially iDVD.
When Mavericks came out I updated and of course it changed iMovie. I just finished a photo project with music on iMovie and planned to transfer it to iDVD for burning DVD. This is a family project and I want to distribute copies to the rest of the family.
It turns out that I cannot use iDVD with the new iMovie version and/or Mavericks.
iDVD does not contain the buttons that it used to have on each theme in order to play the DVD.
I cannot drag the movie into iDVD.
What can I do so that I can use iDVD when I have an iMovie project to burn it on a DVD.
I can go back to the previous version of iMovie and still have Mavericks.
I do not know, I am lost. Why doesnt this work without any problems when updating the operting system. Apple should take into consideration all the previous applications etc when it makes an older computer able to update to more current system.
I appreciate any help offered.
Thank you

Export the slideshow out of iMovie via the File ➙ Share ➙ File menu option as a 480p Quicktime movie.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

After burning to dvd, using idvd, movie stops on frame but audio continues

After creating imovie which works perfectly, and also after trasferring to idvd works perfectly, i have problems when playing back dvd after burning to disc. The movie stops but the audio continues. I altered the clip but same thing happened in next clip after next burn. I don't think its a corrupt clip, but maybe something to do with WHEN it occurs in the movie. Any suggestions? After 4 goes and many hours burning I am stumped!

Hi Tomma1
And welcome to apple discussions. It's good you chose to use 16 bit audio for all of your source material. And assuming this is accurate info .... From what I can tell, you are doing nearly everything correctly. However let me ask you a few questions.
1. Are you using the boot volume (the hard drive where iDvd and Leopard are actually located) to encode your dvd (yes/no)?
2. More importantly, does the disc image also go out of sync when played thru apple's dvd player app? or does it only happen on the burned dvd-r?
3. Are you using Verbatim Dvd-R or an alternate brand? if it's the latter, then for troubleshooting purposes while on this forum; please use Verbatim Dvd-R. (it helps us eliminate additional / possible variables). Thereafter feel free to use the media that works best for you and your mac.
4. Have you tried an alternate encoding setting other than pro quality setting? and do you get the same results?

I've tried everything-I still get error during rendering/encoding using iDVD

I have a iMac Intel core duo (2005) with OSX10.4.11 and iDVD vers.7.04, 2 gigs of RAM and 56Gigs of free HD space. I can't burn a 3 slide slideshow to DVD without getting rendering/encoding error. I can't save a Disk Image file nor a Video TS folder. I have tried deleting the iDVDplaylist to trash. I have repaired permissions from install DVD. I have also logged on as new user with same results. I've tried using different themes and I have also tried from scratch using Magic iDVD. The built-in dvd burner works fine with regular files so I am confidant it works OK. This is the first time I have used iDVD and all slides are from the media pane and there are no errors in map view. Can anybody help!!!!

Hi
Did You in iDVD - Turn on TV-Safe area ?
Anything goes beyound this - OR EVEN Touching IT ! ? - It must not.
Titles and Chapter names (on menus) - Only A to Z and 0 to 9 - NO OTHER letters as : - ; . etc.
Yours Bengt W

Burning an iMovie 10 project using iDVD

I created a slideshow movie with a theme (no audio) by iMovie 10. I want to burn a looping DVD of this movie without an added DVD theme, using iDVD. How would I bypass the iDVD themes?

(From fellow poster Mishmumken: )
How to create a DVD in iDVD without menu (there are several options):
1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way": Postproduction with myDVDedit (freeware)
Tools necessary: myDVDedit ( http://www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
http://lonestar.utsa.edu/llee/applescript/dvdimager.html
Several of our resident experts also recommend this: there is a 3rd export/share option that give better results. That's to use the Share ➙ Media Browser menu option. Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
If you are using iMovie 9 see also this:
http://support.apple.com/kb/PH5543?viewlocale=en_US&locale=en_US

Getting Final Cut Express movie (burned using idvd) to play in Windows

I have made my Final Express movie into a dvd using idvd. However, it will not play on Windows media player, even though it plays on a regular dvd player. I am not certain why, but is there a way I can make it compatible? I have tried even burning it as a "disk image." I know I made it work before, but I can't recall exactly what I did previously to make it play in Windows media player. Any suggestions?

Unfortunately, I have never found a way around this. It seems like DVDs created in iDVD are incompatible with some DVD players and most PCs that I have tried.

Slide Show from Fotomagico to .mov to DVD using iDVD 08

I used to make slide shows using analogue equipment (multiple slide projectors and electronic controlled slide changes involving fading and timing). These slideshows were projected onto a large screen (2m * 2m). With the introduction of large high definition TV screens and advanced display options it is natural to aim for this media. I use Fotomagico to develop slideshows and aim for quality high definition and smooth transitions (pan, zoom, fade). As long as I use the Fotomagico for screening transitions are smooth but once I take the show thru the conversion process (part of Fotomagico) to make .mov files for QuickTime or that matter for iDVD, pan/zooms may or may not come out jerky on the screen be that on the computer screen or the TV. However this never happens when using "Front Row". Is it possible that Quicktime and iDVD (08) do not make proper use of hardware resources available? Is there any software that would not cost me an arm and a leg that would overcome this problem? My system is a Mac Pro Q-Core 2.8 GHz and 6 GB of RAM and I have 200 GB HDrive available. One of the offending pictures has 344 KB with an aspect ratio of 3.6 taking 12 seconds for the pan (screening the picture from let to right in slow motion) and increasing the screening of one image to 20 second may reduce the jerky motion slightly. Fotomagico staff is aware of that problem that will not occur as long as the show is screened using Fotomagico - of course the whole exercise is to bring a show to anyone using DVD players and TV screens. I am highly suspicious of QuickTime and iDVD since shows play ok using "Front Row". Any suggestions or questions?

What am I missing? How come DVD recorders can record and play back good to very good resolution and motion in HD coming from TV broadcasts or for that matter coming from professionally made DVDs?
Maybe I left something unexplained in my post: Slideshows developed with Fotomagico and transferred to .MOV format and then recorded on DVD (using iDVD) in 1920*1080 are coming out quite good on my large screen TV (LG DLP 52" 1280*720p) and the same is true playing the .MOV file on the Mac or a PC. I do not use a projector for play back.
It is only when it comes to PAN/ZOOM motions that the display can become jerky. During the translation from Fotomagico to .MOV format I am using the best resolution and compression available to me. I am aware that during the translation (authoring?) massive amounts of data have to be processed to generate the illusion of a slowly moving picture passing across the TV (monitor) screen especially so considering the wide screen (16:9) format.
I am new to making movies for DVDs and I like to learn and why not from the best; any help with my problem is much welcomed and I apologise if I don't use the proper terms or if I bark up the wrong tree.

Installed iLife 11 and iPhoto is damaged or corrupted. I see my photos in iDVD media, though.

Cannot open iPhoto. Message says iPhoto is damaged or corrupted. This happened after I installed iLife 11 and after I used iDVD to burn slideshows. I do see thumbnails of my photos in the iDVD media. How do I get my iPhoto and iPhoto library back?

Reinstall iPhoto.
- after backing up, of course.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Multiplexer Error message when using iDVD

I have been using iDVD successfully but now have a problem. I set up the program and everything is working fine then, just towards the end of the build, I get a 'multiplexer error' message and everything stops. It does NOT say 'not enough memory'. What could have gone wrong? (The particular .mov file, produced on Final Cut Express, I am attempting to burn has been successfully run on iDVD previously without menus; the only change has been to create chapters and setting iDVD to make a menu.)

Hi
From FCE/P I do
• Export out as QuickTime .mov file
• Not selfcontained (not important but saves time and space)
• NO QUICKTIME Converstion
This file I import into iDVD.
*Multiplexing Error*
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
*Using strange letters in video project name* eg +,/; etc. keep to a-z and 0-9
strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in:". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From: Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
Yours Bengt W

Using iDVD to make avideo on DVD

I am having trouble producing a DVD of an FCE video, using my present software: FCE 3.0; QT Pro; and Toast 7. (In case its relevant, transitons and fades to black cause the format to change momentarily from 16:9 to 4:3 and back. I cannot cure this.) DVD Studio Pro is now sold only as part of the big package at huge cost, so I want to try iDVD but need advice on whether it will definately do what I want, which is:
1. My camera is a Sony DCR-HC96 (current model). It's True Widescreen: that is, its CCD is physically 16:9
2. Produce a video (including transitions, fades, effects) in QT format from FCE by choosing FCE > Export > QuickTime Movie
3. Produce a DVD which will display on a standalone DVD player and TV set as either letterboxed (on a 4:3 TV) or as true 16:9 (on a widescreen 16:9 TV) with no reversion to 4:3 when the transitions or fades or effects appear
Two questions please:
A) Will iDVD definately do this successfully?
B) What Easy Setup should I use: DV-PAL or DV-PAL Anamorphic (or another)?
Thanks
G5/2.0 GHz Mac OS X (10.3.9) 1 GB RAM, 150 GB HD, Sony DCR-HC96 mini DV, FCE HD 3.0

I don't know what you have already tried but when dealing with standard DV this is what you do.
1. In the timeline select the clips you want or use In/Out markers.
2. Choose File>Export>QuickTime Movie etc.
However, the best thing to do is try it out on a DVD-RW so that if it doesn't work you have not wasted anything - other than time.
If you want to use a DVD-R then get some on a cakestand that cost less than 30 pence each - I have never had any problems with them.
Ian.

Using IDVD for music promo

Hi guys,
Would really appreciate some advice on this:
Using IDVD I have produced a kind of interactive demo for the purpose of showcasing examples of my music productions. This project only uses audio files and images (no video). I realise that idvd is really for 'moving' media like video, but I really liked the graphical interface and want to produce something classier than just an A4 biog.
It all looks great, but when it comes to saving the project as a disk image it says "There were errors during the project validation. These errors have to be fixed before burning the project.". I think this is because there is no video in my submenus, just audio and background images (an exclamation mark appears on each of the submenus' frames).
Is it possible to use IDVD in the way I want or am I barking up the wrong tree?
If I am, what can I use to make a similar promo resource for my music?
Thanks in advance guys!
Ben, Brazil

Hello Ben,
I may be mistaking what you want to do, but if you have no video files linked to any of the menus, iDVD may be confused. To remedy this, you could either create a very short and quiet movie in iMovie (eg, your name on a single slide) and then link it to each submenu. Depending on the theme you're using, you may be able to "hide" the button by editing the button text to a period or a couple spaces. The other option is to create an alternate combination of your music and still images in iMovie and link it in a visible way to the menus.
If you are adventureous, the combination of Quicktime Pro, Photoshop/Elements, MakeEffectMovie, and iMovie can give you many of the same types of effects as the iDVD themes. Although the book is a bit dated now, many interesting ideas using that software are contained in "iMovie 3 Solutions" by Erica Sadun.
John

Using iDVD to burn a iMovie

I made a slideshow on iMovie and would like to burn it using iDvd. I would like it to loop over and over again. Really, I don't want/need the menu page. Can you help? It's pictures of my son for his graduation, so I do not want to keep pressing play. I created it in iMovie so that I could utilized Ken Burns.

I followed the instructions you sent. I can't select the movie from the Movies section of the Media pane. It says I need to format the iMovie for Media Browser. My question is: what size do I select in iMovie for Media Browser? I know it should be set for Computer, but do I select 1)large, 2)HD 702p or 3)HD 1080p? Thanks.

Burning movies using iDVD?

Hi, please can you help.
I want to use iDVD to burn a movie I have on an AVI file, it's about 2 hours long. When I drag on to iDVD screen it says its too big and need to change encode on project menu, You have Best, High, Professional etc, the top one is too big. Do I use High or Professional? When I change that and go to burn a pop uo still comes up and it says there are still some things that need changing after I've done this, but can still continue burning. Can you tell me what it is and will an AVI play back on a standard DVD player afterwards when burned. I don't want to wait over 4 hours to find out it won't work.
Can anyone please help and tell me how I can speed it up, do I use High/Professional if 'Best' won't let you do a 2 hour film, and what else I need to fix. Why does it keep coming up with 'continue burning' but tells me things need to be fixed first, but now what after I've changed the encoding.
Thanks

The cause of the problem could be two-fold: the one stated, and your choice of the outdated Microsoft AVI file container which, depending on the video codec used, may not be compatible.
But if the video plays in Quicktime and/or iMovie it should be OK. Does it?
Encoding can take a considerable time. 4 hours is not unusual.
(From fellow poster Mishmumken: )
How to create a DVD in iDVD without menu (there are several options):
1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way": Postproduction with myDVDedit (freeware)
Tools necessary: myDVDedit ( http://www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
http://lonestar.utsa.edu/llee/applescript/dvdimager.html
Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results. That's to use the Share ➙ Media Browser menu option. Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
Hope this helps!

Using iDVD Media in FCE HD

Similar Messages

Maybe you are looking for