Using IE 10 opening or trying to save file using the link cause IE to restart

I am using IE 10 and adobe reader 11.0.4 . ie When I try to open or save a PDF I get a message IE has stopped and checking on line for solutions and then just restarts IE. I have checked a similar post which mentions editing the registery but when I check it doesnt have that setting. I am also using windows 7 32 bit.
Cheers

Does the problem occurs with any PDF? Can you try opening this PDF: http://helpx.adobe.com/pdf/adobe_reader_reference.pdf?

Similar Messages

Permission denied when in windows trying to save files to the MacHD

I just made the huge leap from a Dell Laptop to the Mac Book Pro and I can't be more thrilled about it! With change, obviously comes with some challenges, not the least of which is my lack of knowledge on the new platform.
Because I had some programs I wanted to keep that were more robust in the Windows environment than Mac OS, I set up a dual boot. It works great.
For the first few days I was able to write while in Mac to the Windows Drive and while in Windows to the Mac drive.
Now, for some reason, and I'm not sure what change I made or installation caused it, but I'm now getting "denied access you don't have permission to write to this drive" when I'm in windows trying to save doc's to the Mac. I keep everything in one place.
I used disc utility and verify and repair permissions, there was a bunch of code on the screen it says it fixed it except one area in the library it said it couldn't modify. This is all greek to me at this point.
Im at the point of reinstalling the OSX system with the archive and install, to see if a 'reset' in that fashion would work.
Any help for a Mac Newbie would be appreciated. The learning curve is fun.

As you have found out, Paragon HFS+ and MacDrive allow you to write from Windows to Mac, while booted in Windows, but you may also want to get Paragon's NTFS for Mac or NTFS Mounter (free) which also enable you to write to the Windows partition while booted in Mac. These install on the Mac side of course. I often use these to put files on the Windows desktop (or elsewhere) I know I may want next time I boot to Windows.
Paragon's NTFS for Mac is seamless compared to NTFS Mounter, but is more expensive, and also requires a slightly different process (via the Paragon pref pane) to boot from Mac to Windows.
BTW I have experience of both MacDrive 8 and Paragon HFS+. Both work but I had Paragons HFS+ installed when I tried to update to Windows 7 Service Pack 1 recently, and it kept failing. There was a thread about it here somewhere, where a number of other people had the same problem. The culprit was Paragon HFS+. Uninstalled Paragon HFS+ and the update went through. MacDrive 8 was OK, and I have stayed with it since then.
MacDrive 8 is good and has good support, but it has the most draconian activation policy I have ever encountered. You can deactivate in order to use the SN on another computer, but if you forget or the hard drive fails you will get a message about exceeding allowed number of activations. Support are very quick to reset it when this happens, but it is irksome.

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible or something similar. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible access denied. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
I keep seeing problems and lack of support for MacFUSE, that could change.
http://www.bing.com/search?q=ntfs+for+mac

How do you transfer photo albums to the computer? When I hook to USB, it only shows photos from the camera icon, not the photos icon. I am trying to save pictures for the in-laws from their ipad.

How do you transfer photo albums to the computer? When I hook to USB, it only shows photos from the camera icon, not the photos icon. I am trying to save pictures for the in-laws from their ipad.

I have no clue that you mean by it only shows photos from the camera icon. It has to show the photos in the camera roll of the photos app since those are the only photos that you can import via the USB cable.
There are other ways of transferring photos to a computer, but they involve using third party apps. There are WiFi transfer apps that will do this. DropBox will also let you upload photos to a public folder and then download them to a computer.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
http://www.wirelesstransferapp.com/
https://www.dropbox.com/ipad

Is it secure to have the pulic open a resource guide in Adobe Reader? Or is there a way to make sure anyone using the link to the guide is secure?

Is it secure to have the public open a resource guide in an Adobe Reader PDF? Or is there a way to make sure anyone using the link to the guide is protected?
Not sure how to find an answer to this.
Thanks, GM

I am trying to post a 123 page resource guide online for the public to access through the website of a non profit. The guide has a lot of web links for to use for more information. But there have been clickability issues when using some browsers to download the PDF and so I would prefer to suggest that they try to download the resource into Adobe Reader before using. I want to make sure that this would securely safe for readers and users.
Sorry I was not clear in my original question and thank you for your kind attention.
Thank you again,
GM

Path does not exit - While trying to save file on SharPoint Server 2013 from client machine

Hi,
I have installed Microsoft SharePoint Server 2013 Enterprise Edition on my testing Lab environment (On VM Workstation 10) on Windows Server 2012 with SQL server 2012, I can access all files stored at SharePoint Server from any physical machine, I can share
a single file among different people to work simultaneously, but here i stuck on saving any file from client machine to directly on SharePoint Server, Attached is the snap shot, whenever I try to save any file directly It says Path Does Not Exist, If I drag
and drop any file directly to SharePoint I do not see any error message.
I read from different posts that I need to Enable Desktop Experience Feature on Server 2012, which I installed but no positive result gained :(
I will appreciate for any possible help?
Ali

Hi Ali,
Please try disabling the protected view per the link below and test the issue again:
http://social.technet.microsoft.com/Forums/en-US/b8381a19-3394-406f-8adb-1976f45460ef/path-does-not-exit-while-trying-to-save-file-on-sharpoint-server-2013-from-client-machine?forum=sharepointgeneral
You could simply type the url as http://sp/sites/sitename in the Filename place.
Regards,
Rebecca Tu
TechNet Community Support

My iphone 4 wont open i tried charging and plugging to the computer. What should i do?

My iphone 4 wont open i tried charging and plugging to the computer. What should i do?

A reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

M faceing one error on my screen when m using adobe premiere & save file then the one massage come on my display "adobe premier pro cs6 has been sttoped working" can you resolve the problem

m faceing one error on my screen when m using adobe premiere & save file then the one massage come on my display "adobe premier pro cs6 has been sttoped working" can you resolve the problem

Nobody can tell you anything without system information and other details. Ask in teh Premiere forum and provide al lthe required info.
Mylenium

I am trying to verify my email and I don't know how I have used the link provided but it still says

I am trying to verify my email and I have used the link provided in the email but it still says I need to verify my email address. What do I need to do?

Were you directed to a web page saying Email Verified after you click on the link?

Am I required to save files to the Creative Cloud, or may I use a local file server?

Am I required to save files to the Creative Cloud, or may I use a local file server for in-office sharing?

You are not required to save files to the Creative Cloud.
The online file storage is merely and an additional service, but there are several benefits:
You file is backed up online in case the file is accidently deleted locally or your hard drive crashes.
Image previews of InDesign, Illustrator and Photoshop files in the web browser for someone who does not have these programs and would otherwise be unable to view the file.
Share the file with someone else allowing them to comment and download.

Can I safely save files to the external harddrive I am using as/for a Time Machine?

Can I safely save files to the external harddrive I am using as/for a Time Machine?

Because ALL Hard Drives fail. They have been since they were invented. It is just a fact of Spinning hard drives.
No nothing special about how TM writes to the drive.
Any hard drive can fail at any time. The day you take it out of the box and plug it in to 10+ years later or anytime in between. Kind of like Life. At some point it ends for everyone. Some sooner some much later.
I've had some work for years, like 7++ running 24/7. Others have died in months to a few years. I've had externals died faster then internal drive and the funny part is an external drive is nothing but the same type drive used Inside a computer, an Internal drive, put into an External case. But most of the time when an external dies it is not the drive itself but the Enclosures Electronic that fail. Removing the physical drive from the enclosure and using a SATA, or IDE, to USB Adapter the drives are usually still good. I've even taken dead externals and removed the drive and put that drive inside a computer case and they work for X number of years. But that doesn't mean that All Drives are like that.

How do I use the commands to start and restart the jmqbroker normally?

How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?

'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that.

Since upgrading to Lion, i am unable to take screen shots. i get the message that i don't have permission to save files to the place where SSs are saved. how can i regain the ability to save screen shots? thanks

since upgrading to Lion, i am unable to take screen shots. i get the message that i don't have permission to save files to the place where SSs are saved. how can i regain the ability to save screen shots? thanks

First of all, are you using the OS native screen capture?
If not, make sure the application you're using has been update for Lion. I was using Snapz Pro for years, but I need to update it for use with Lion. Meanwhile Grab and the keyboard shortcuts are working on my Lion load.
If you are using the native capture mode unsuccessfully, I would run the Disk Utility and repair permissions on the drive. For some reason, even in past OS Versions, routine maintenance of permissions makes life a lot easier.

I get a message that says ff is already running but is not responding ,to open a new window, you must close the existing ff process or restart your system, how do i close the existing ff process?

I have windows 7 on dell laptop. I am working on a Word Document and want to go to a diff window for some information. I click on the FF icon on my desktop and get a message that says...FF is already running but is not responding. To open a new window, you must close the existing ff process or restart your system..how do you close the existing ff process?
== This happened ==
Every time Firefox opened
== I got my new dell laptop four weeks ago with window 7 installed

See https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding

To open a Excel and Doc file inside the AIR application

How to open a Excel and Doc file inside the AIR application. I have opened the PDF file inside the AIR application. But i got stuck in opening the Exce and Doc file. Please help me in this issue.

AIR does not support this inherently. However, you could write code to parse these file formats. For example, the following is an ActionScript 3.0 library for reading and writing Excel files:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1375018

Using IE 10 opening or trying to save file using the link cause IE to restart

Similar Messages

Maybe you are looking for